How to load the ssl certificate to oracle wallet

I have oracle 10.2.0.3 on Unix.
I have a oracle wallet created. I need to load ssl certificate to the oracle wallet. I have CA certificate and server related certificate. In owm interface, there is Certificate:(Empty) and Trusted Certificates. Does anybody know where my certificate should go, Certification:(Empty) or Tryusted Certificates? By the way my certificate is from Verisign.
Thanks a lot!

Hi
Thanks. I have added my LDAP certificate to Oracle wallet.
Now my doubt is :
Before adding this cert to my wallet , i have tried to connect my application through SSL , am able to connect it.
I have used DBMS_LDAP.open_SSL function for conencting.
Before adding the new cert my wallet conatins :
ewallet.p12
cwallet.sso
GeoTrust.cer
Equifaxb64.cer
After adding the new cert also i am able to conenct through ssl my concern is , how we can figure out whether the ldap package checking my cert or not?
How DBMS_LDAP.open_SSL works?
Could anyone help me out to solve the issue?
Thanks,
San

Similar Messages

How to get the ssl-certificate trusted on lion-server

I'm in the process of setting up lion server to create a small (international) research group collaborating on a project.
So I want to use the server to exchange data, use a common calendar, address-book etc.
To do so you need to get a SSL-certiifcate (unless you do everything on VPN).
So I selected the server in server.app (Hardware) and selected SSL certificate edit
created a certificate signing request that I exported and saved on my computer
I received a ssl.crt that I also saved and dragged into the window and replace the original certificate with the signed one
and also imported the certificate in to the keychain
All following the steps described in:
Managing iOS deviceswith OS X Lion Server by Arek Dryer
the book describes that the certiifcate should now be trusted and valid. However, I keep the message "This certificate was signed by an unkown authority"
So I somehow did something wrong.
Any suggestions what I should do?

ok let me add some info in the hope I will get some guidance:
using the site http://www.sslshopper.com/ssl-checker.html
I was able to check on the status of the certificate:
The certificate is not trusted in all web browsers. You may need to install an Intermediate/chain certificate to link it to a trusted root certificate. Learn more about this error. The fastest way to fix this problem is to contact your SSL provider.
since it is a non-commercial server I used a 'free?' SSL-certificate provider that will charge you when you contact them, so you have to figure it out by yourselve
I guess I would be helped if there is a step by step manual how to install a root certificate

How to load the data from .csv file to oracle table???

Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance

981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al

How to load the data from excel file into table in oracle using UTL_FI

How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some example

This is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP

How to get the Users Name from the SSL certificate?

Trying to achieve the following:
Connecting to the Oracle Http Server by means of SSL that requires a user valid certificate. Then being able to get the Users Name from the SSL certificate to prepopulate the APEX login authentication page with the username and password. Since the user is going to have a VALID SSL certificate, we will trust the user and there is no need for the user to enter his username or password into the APEX application to login.
Does SSO do this or something else?

Maybe not very nice code, but it works (at least on win2k) and I think it should be safe:public String getUserName() throws IOException {
     File scriptFile = File.createTempFile("script", ".js");
     FileWriter fw = new FileWriter(scriptFile);
     fw.write ("WScript.Echo(WScript.CreateObject('WScript.Network').UserName)");
     fw.flush();
     fw.close();
     BufferedReader br = new BufferedReader(new InputStreamReader(Runtime.getRuntime().exec("CSCRIPT.EXE \"" + scriptFile + "\" //Nologo").getInputStream()));
     String uName = br.readLine();
     br.close();
     scriptFile.delete();
     if (scriptFile.exists()) scriptFile.deleteOnExit();
     return uName;
}

How to load the certificate authority into the keystore for the weblogic8.1

how to load the certificate authority into the keystore for the weblogic8.1
==================================================
Getting the message below when trying to improt the certificate to the weblogic 8.1 web server. Received this certificate from our internal IT certificate authority. Trying to import the certificate to our test sytem.
===================================================
keytool error: java.lang.Exception: Failed to establish chain from reply
Import failed. Verify that the Certificate Authority that signed 'certi.pem'
has been loaded into your keystore 'keystore\pskey'
To view keystore contents issue 'PSkeymanager -list -keystore keystore\pskey [-v
To preview a certificate file issue 'PSkeymanager -previewfilecert -file certi.pem'

You need to populate that field using cmod code. Find out from which table that field is and go to transaction cmod then enter project name and select component radio button then display.
Now select the FM EXIT_SAPLRSAP_001 if your datasource is transactional dataource
EXIT_SAPLRSAP_002 for master data attibute
EXIT_SAPLRSAP_003 for Hierarchies
EXIT_SAPLRSAP_004 for text
then populate code .
After your code then delete data from ods then reinit to populate the enhanced field.
Hope it helps..

How can the client know if the SSL certificate specified in the service-config.xml file is invalid/u

Hi,
How can the client know if the SSL certificate specified in the service-config.xml file is invalid/untrusted/expired? For example using iOS client, the trusted certificate will not work and the client has no way to know that the certificate is untrusted. Can the lcds server return any specific exceptions for SSL errors?
Thanks,
Swathi.

We use a standard Java keystore and certificate validation can be handled as per standard best practices. At present we do not provide a hook point to validate the server certificate. However, you can register a bootstrap service which validates the certificate on system startup: http://help.adobe.com/en_US/dataservicesjee/4.6/Developing/WSc3ff6d0ea77859461172e0811f00f 6fe7f-7ffeUpdate.html This would require you to pass another copy of the keystore configuration to you Bootstrap service and then you can inspect the certificate in the keystore and validate it.

How do i "re-trust" the SSL certificate sent from a server I previously marked as untrusted?

I use Citrix Receiver to access my workplace Windows environment remotely from home, where I run Firefox 7.01 on Ubuntu 11.10. Two days ago the SSL certificate expired, so when I tried to logon remotely it failed. Now the company have renewed the certificate, but now when I try to logon I get an error from the Citrix ICA Client saying "You have not chosen to trust Verisign Class 3 Public Primary Certification Authority - G5, the issuer of the server's security certificate (SSL error 61)"
I have found a couple of similar queries here, but neither had a solution which worked for me. The entry for Verisign Clas 3... G5 is in /etc/ca-certificates.conf, also there's a link to it in /etc/ssl/certs to an existing ...G5.crt file in /usr/share/ca-certificates - Firefox seems to recognise the issuer as a valid existing certificate issuer. Firefox displays the certificate for the page when I use menu options Tools -> Page Info -> Security -> View Certificate, and the certificate shows as valid for today - for the life of me I can't find a way to make Firefox trust the darn issuer.
I get the same fault with Firefox 3.6.23 on Ubuntu 10.04.
(I'd rather not tell everyone here the URL of my company's remote access website)

Thanks for the swift reply, cor-el - unfortunately, no joy with this approach.
A. As my named user (called "greg", surprise, surprise, no secret there...)
Run Firefox; select Edit > Preferences > Advanced : Encryption:
Here I get no option for Certificates, but I do get View Certificates - then tabs for:
- Servers, under which my company's remote logon URL is listed - Edit button is grey
- Authorities, under which the Verisign...G5 entry may be edited; 3 options:
1. may identify websites (ticked)
2. may identify mail users (unticked)
3. may identify software makers (ticked)
I ticked 2, tried again - same failure. Unticked it.
B. As root.
Run Firefox; select Edit > Preferences > Advanced : Encryption:
Here I get no option for Certificates, but I do get View Certificates - then tabs for:
- Servers, under which my company's remote logon URL is NOT listed
- Authorities, under which the Verisign...G5 entry may be edited; 3 options:
1. may identify websites (ticked)
2. may identify mail users (unticked)
3. may identify software makers (unticked)
I ticked 2 and 3, tried again - same failure. Unticked them.
Maybe a solution would be, in some way, to add my company's remote logon URL to the list of Servers while running Firefox as root. The Export and Import buttons may help here. However, when I first declined their certificate I was running Firefox as greg, not as root, so I am a bit suspicious there - what can be done as greg should be undoable as greg.
This is doing my head in. Maybe it's time to step back and think a bit. Maybe try Citrix's online help (already spent a fair amount of time there with no joy either).
So, thanks again for the reply - I've generally tried to provide a good list of what's up, and your reply has given me food for thought. OK, I'll keep trying.

The SSL certificate of the server is expired

Today, I accessed Beehive Online via Oracle Beehive Extentions for Explorer.
I cannot use Beehive Online with error message "The SSL certificate of the server is expired".
How should I do?

We're looking into it, meanwhile you can use a Webdav connection.
Thanks,
Jereen

Install SSL certificate for Oracle HTTP server

I received a PFX file that contains an SSL wildcard certificate for our company *.xyz.com.
I used this tool "xca" to extract two files: "server.crt" and "serverkey.pem".
I want to install this on the oracle 11g HTTP server (OHS) installed as standalone based on apache 2.2
With oracle, i have to create a wallet and point the SSL.CONF wallet directive to use that wallet.
I used Oracle Wallet Manager to create it and import the certificate but this is where i am having a problems.
First I could not restart the web server but the it worked but I got SSL handshake errors (Shown below).
According to oracle steps, I have to create a CSR and then import the certificate into the wallet
http://www.apache.com/resources/how-to-setup-an-ssl-certificate-on-apache/
However, when I tried to use Oracle Wallet Manager, there were two options: import server certificate and trusted certificate.
The import server certificate was greyed out. I had to create a CSR just to get it enabled but I did not use the CSR, i just imported the "server.crt" file.
I also tried to import the "serverkey.pem" into the trused certificate option but was rejected (invalid certificate).
Do you know how to create a successful wallet based on the files i have and not creating a CSR since i already have a certificate file?
2013-05-04T20:11:40.2718-04:00] [OHS] [ERROR:32] [] [core.c] [host_id: ptp.xyz.xom] [host_addr: 10.72.11.211] [pid: 11339] [tid: 1253263680] [user: root] [VirtualHost: ptp.xyz.xom:443] nzos handshake error, nzos_Handshake returned 29040(server ptp.xyz.xom:443, client 10.60.117.121)
[2013-05-04T20:11:40.2719-04:00] [OHS] [ERROR:32] [] [core.c] [host_id: ptp.xyz.xom] [host_addr: 10.72.11.211] [pid: 11339] [tid: 1253263680] [user: root] [VirtualHost: ptp.xyz.xom:443] NZ Library Error: Unknown error
[2013-05-04T20:11:40.4774-04:00] [OHS] [ERROR:32] [] [core.c] [host_id: ptp.xyz.xom] [host_addr: 10.72.11.211] [pid: 11339] [tid: 1263753536] [user: root] [VirtualHost: ptp.xyz.xom:443] unusably short session_id provided (0 bytes)
[2013-05-04T20:11:40.4776-04:00] [OHS] [ERROR:32] [] [core.c] [host_id: ptp.xyz.xom] [host_addr: 10.72.11.211] [pid: 11339] [tid: 1263753536] [user: root] [VirtualHost: ptp.xyz.xom:443] nzos handshake error, nzos_Handshake returned 29040(server ptp.xyz.xom:443, client 10.60.117.121)
[2013-05-04T20:11:40.4776-04:00] [OHS] [ERROR:32] [] [core.c] [host_id: ptp.xyz.xom] [host_addr: 10.72.11.211] [pid: 11339] [tid: 1263753536] [user: root] [VirtualHost: ptp.xyz.xom:443] NZ Library Error: Unknown error
[2013-05-04T20:11:40.6814-04:00] [OHS] [ERROR:32] [] [core.c] [host_id: ptp.xyz.xom] [host_addr: 10.72.11.211] [pid: 11339] [tid: 1274243392] [user: root] [VirtualHost: ptp.xyz.xom:443] unusably short session_id provided (0 bytes)
[2013-05-04T20:11:40.6816-04:00] [OHS] [ERROR:32] [] [core.c] [host_id: ptp.xyz.xom] [host_addr: 10.72.11.211] [pid: 11339] [tid: 1274243392] [user: root] [VirtualHost: ptp.xyz.xom:443] nzos handshake error, nzos_Handshake returned 29040(server ptp.xyz.xom:443, client 10.60.117.121)
[2013-05-04T20:11:40.6816-04:00] [OHS] [ERROR:32] [] [core.c] [host_id: ptp.xyz.xom] [host_addr: 10.72.11.211] [pid: 11339] [tid: 1274243392] [user: root] [VirtualHost: ptp.xyz.xom:443] NZ Library Error: Unknown error

I do not have weblogic installed. I only have standalone 11g HTTP server with mod_plsql.
If i can get OWM working to create a successful certificate them the problem would be resolved.
I am just not sure what is Root Certificate and Trustworthy Certificate and how to get that from the files i have.

The server was unable to load the SSL provider library needed to log in

Hello All,
When I am trying to login to my default SQL 2008R2 SP2 instance in windows 2003 server via ssms, I am getting the below error
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
When I looked into the error log and i could see lot of these messages.
The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books
Online for information on this error message: 14 Not enough storage is available to complete this operation.
Force protocol encryption is set to off.
I am not sure what is the underlying problem. server's total RAM is 4 Gb and max_server_memory is set to 2 GB. CPU utilization is very normal at the time of issue.
I restarted the SQL service and i am able to connect to the instance, but the issue is repeating and i need to find a permanent fix.
Thanks

I could also see the below in error log some time before i get the above alert
Error: 701, Severity: 17, State: 123.
There is insufficient system memory in resource pool 'internal' to run this query
then after sometime flurry of alerts
The server was unable to load the SSL provider library
needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books Online for information on this error message: 14 Not enough storage
is available to complete this operation.
Thanks

How to Load the data from excel file(Extension is .CSV) into the temp.table

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Hello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly.

How to load the data from excel file into temprory table in Forms 11g?

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Declare
    v_full_filename         varchar2(500);
    v_server_path           varchar2(2000);
    v_separator             VARCHAR2(1);
    v_filename              VARCHAR2(400);
    filename                VARCHAR2 (100);
    v_stop_load             varchar2 (2000);
    v_rec_error_log         varchar2(4000);
    v_error_log             varchar2(4000);
    ctr                     NUMBER (12);
    cols                    NUMBER (2);
    btn                     number;
    RES                     BOOLEAN;
    application             ole2.obj_type;
    workbooks               ole2.obj_type;
    workbook                ole2.obj_type;
    worksheets              ole2.obj_type;
    worksheet               ole2.obj_type;
    cell                    ole2.obj_type;
    cellType                ole2.OBJ_TYPE;
    args                    ole2.obj_type;
    PROCEDURE olearg
    IS
    args   ole2.obj_type;
    BEGIN
    args := ole2.create_arglist;
    ole2.add_arg (args, ctr);
    ole2.add_arg (args, cols);
    cell := ole2.get_obj_property (worksheet, 'Cells', args);
    ole2.destroy_arglist (args);
    END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
                                 ,file_name      => null
                                 ,file_filter    => 'Excel files (*.xls)|*.xls|'
                                                                        ||'Excel files (*.xlsx)|*.xlsx|'
                                 ,message        => 'Choose Excel file'
                                 ,dialog_type    => null
                                 ,select_file    => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
    filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
    application := ole2.create_obj ('Excel.Application');
    ole2.set_property (application, 'Visible', 'false');
    workbooks := ole2.get_obj_property (application, 'Workbooks');
    args := ole2.create_arglist;
    ole2.add_arg (args, filename); -- file path and name
    workbook := ole2.get_obj_property(workbooks,'Open',args);
    ole2.destroy_arglist (args);
    args := ole2.create_arglist;
    ole2.add_arg (args, 'Sheet1');
    worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
    ole2.destroy_arglist (args);
    ctr := 2;                                                     --row number
    cols := 1;                                                -- column number
    go_block('xxx');
    FIRST_RECORD;
    LOOP
            --Column 1 VALUE --------------------------------------------------------------------
        olearg;
        v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
        :item1 := v_stop_load;
        cols := cols + 1;
          --Column 2 VALUE --------------------------------------------------------------------
        olearg;
        :item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
        cols := cols + 1;
        --<and so on>
    ole2.invoke (application, 'Quit');
    ole2.RELEASE_OBJ (cell);
    ole2.RELEASE_OBJ (worksheet);
    ole2.RELEASE_OBJ (worksheets);
    ole2.RELEASE_OBJ (workbook);
    ole2.RELEASE_OBJ (workbooks);
    ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped.

Sequence tag error while importing the SSL certificate into ".keystore" fil

I have created the ".keystore " file successfully and also imported the "root.cer".
but while importing the SSL certificate it says like
"keytool error: java.security.cert.CertificateException: IOException: Sequence ta
g error" (I got the certificate from Verisign)
How to resolve this Error?
can anyone help me?
mail to:: [email protected]
Thanks in Advance

Hi,
I resolved this error by making it sure that there are no extra spaces or unwanted caracter copied while copying the certificate response from the CA. Make sure you are copying the certificate response properly. In my case, some extra space was getting copied so after re-copyinf it properly, it worked.

"how to load a text file to oracle table"

hi to all
can anybody help me "how to load a text file to oracle table", this is first time i am doing, plz give me steps.
Regards
MKhaleel

Usage: SQLLOAD keyword=value [,keyword=value,...]
Valid Keywords:
userid -- ORACLE username/password
control -- Control file name
log -- Log file name
bad -- Bad file name
data -- Data file name
discard -- Discard file name
discardmax -- Number of discards to allow (Default all)
skip -- Number of logical records to skip (Default 0)
load -- Number of logical records to load (Default all)
errors -- Number of errors to allow (Default 50)
rows -- Number of rows in conventional path bind array or between direct path data saves (Default: Conventional path 64, Direct path all)
bindsize -- Size of conventional path bind array in bytes (Default 256000)
silent -- Suppress messages during run (header, feedback, errors, discards, partitions)
direct -- use direct path (Default FALSE)
parfile -- parameter file: name of file that contains parameter specifications
parallel -- do parallel load (Default FALSE)
file -- File to allocate extents from
skip_unusable_indexes -- disallow/allow unusable indexes or index partitions (Default FALSE)
skip_index_maintenance -- do not maintain indexes, mark affected indexes as unusable (Default FALSE)
commit_discontinued -- commit loaded rows when load is discontinued (Default FALSE)
readsize -- Size of Read buffer (Default 1048576)
external_table -- use external table for load; NOT_USED, GENERATE_ONLY, EXECUTE
(Default NOT_USED)
columnarrayrows -- Number of rows for direct path column array (Default 5000)
streamsize -- Size of direct path stream buffer in bytes (Default 256000)
multithreading -- use multithreading in direct path
resumable -- enable or disable resumable for current session (Default FALSE)
resumable_name -- text string to help identify resumable statement
resumable_timeout -- wait time (in seconds) for RESUMABLE (Default 7200)
PLEASE NOTE: Command-line parameters may be specified either by position or by keywords. An example of the former case is 'sqlldr scott/tiger foo'; an example of the latter is 'sqlldr control=foo userid=scott/tiger'. One may specify parameters by position before but not after parameters specified by keywords. For example, 'sqlldr scott/tiger control=foo logfile=log' is allowed, but 'sqlldr scott/tiger control=foo log' is not, even though the position of the parameter 'log' is correct.
SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\PFS2004.CTL LOG=D:\PFS2004.LOG BAD=D:\PFS2004.BAD DATA=D:\PFS2004.CSV
SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\CLAB2004.CTL LOG=D:\CLAB2004.LOG BAD=D:\CLAB2004.BAD DATA=D:\CLAB2004.CSV
SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.CTL LOG=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.LOG BAD=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.BAD DATA=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.CSV

How to load the ssl certificate to oracle wallet

Similar Messages

Maybe you are looking for