How to maintain data in a boolean array

Hi
i have booleans inside 1D array
and i have a numerc control, and a text file so that the entered
number going to be compared with the number in the text file
if the numbers match, the boolean of that number goes on
The question is that, when I enter another number the first
boolean goes off how can I maintain the first
boolean on .......
in the Attachments it is shown i entered 5,then the fourth boolean goes ON
but when i entered the second number "6", the last boolean goes ON
and the first boolean which was ON goes OFF
I wana keep both of them ON HOW ?
Solved!
Go to Solution.
Attachments:
Mr.Ismaill.vi ‏10 KB
2.png ‏168 KB
3.png ‏172 KB

code
Attachments:
Mr.Ismaill2.vi ‏10 KB
4.png ‏96 KB

Similar Messages

How to maintain data in scrren using ztable

how to update data in ztable by using program...
plz send a model problem...
i m creating screen(SE51) with ztable fields how to maintain data in that screen. also i m creating transaction for that screen..

Hi
There sample programes given SAP itself.
Go to SE80 and select package as SDWA and press enter
You will see whole list of screen sample programs, you can modify the code little bit to suit the tables u want to update.
Regards
Balaji

How to maintain data in table control

plz send a detail description of how to create table control and maintain data in that table control.

Hello Narendar,
Check the following link:
http://help.sap.com/saphelp_erp2005/helpdata/en/45/adee2396f711d1b46b0000e8a52bed/frameset.htm
Also, a table control wizard in Screen Painter(SE51) exists, which takes you step by step through the Table Control generation and also creates code, so you can start using the Table Control right away.
You can either specify a database table, or use an internal table from program.
If you want to use internal table, it needs to be predefined in your program, before you start creating the table control.
Reward if helpful.

How to maintain Data availability in Oracle 10g RAC when LOADING the data?

Hi
we are having Oracle 10g server on Sun Solaris(64 bit) with 8 GB RAM.
We are in need of moving the database to "Oracle 10g RAC". (Real Application Clusters)
Our doubt is when loading the data into RAC server, will it affect the application?
coz' we heared that RAC server should be down when we load the data.
Is this correct?
If yes, then How to maintain High data availability when we load the data in RAC server?? Please help me.
Thanks.

First, is this the same question that a colleague of yours posted in this thread?
Data Load in RAC
Second, are other sessions querying the table that you're loading data into? If so, how are you loading the data?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to get data from 2-D array?

Some one help me with this....
Attachments:
quadrature decoder with digital signal as input.vi ‏172 KB

you do logics on numbers - not a good idea. stick to boolean. I am not sure in LV, but in text based programming this often means checking for equal. If you compare integer to float numbers you are screwed.
Replace your float 0 with a FALSE Boolean, dont cast your boolean array to integer.
I dont really know what your program is ought to do, but you cannot wire an integer ARRAY into a non-array (case 1). Again, do not mix float with integer. I can see no reason why not to stick to booleans.
At the end, you wired to non array result displays. use right click on the node and create --> indicator to avoid these errors in first place.
Your while loop has no functionality by now but waiting for the stop button.
Finally, please read the "how to post" of the forum and give a more detailed problem description. And maybe also read some of the "getting started with Labview" posts, I feel they might help you out a lot, especially datatypes and arrays should be a valuable readup.
Edit: To answer your question of the subject - try out the "Index Array.vi"

How to change names of an Boolean array in a which has been placed in a cluster?

Hi guys,
for my program i need to initialize which tests are in a testblock. Each test is settable with a Booelan button to enable the test, or disable it.
I have actually 22 testblocks containg over 400 tests. What i would like to do is to make 1 array with Boolean buttons. So, if you're exploring the testblocks, the labels of this buttons must contain the test names. How can i make a program so the testnames will be automatically transferred to the label of the Boolean buttons? (My array of buttons is placed in a cluster, because i have more data to store about the tests..)
thanx for your help.
Attachments:
example.JPG ‏207 KB

Hi btwesseli...,
in an array all elements have the same properties. So you cannot make the labels/captions or whatever different for those booleans.
But:
You can overlay an string over the boolean button. Make a string indicator your cluster, make this string transparent and move it over the boolean. Now you can have a
'label' over the boolean containing the name of the test.
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to save data in a 4D array and make partial plots in real time?

Hi, this is a little complex, so bear with me...
I have a test system that tests a number of parts at the same time. The
experiment I do consists of measuring a number of properties of the
parts at various temperatures and voltages. I want to save all the
measured data in a 4-dimensional array. The indices represent,
respectively, temperature, voltage, part, property.
The way the experiment is done, I first do a loop in temperature, then
in voltage, then switch the part. At this point, I measure all the
properties for that condition and part and want to add them as a 1D
array to the 4D array.
At the same time, I want to make a multiple plot (on an XY graph) of
one selected property and part (using two pull-down selectors near the
XY graph) vs. voltage. (The reason I need to use an XY graph and not a
waveform graph, which would be easier, is that I do not have
equidistant steps in voltage, although all the voltage values I step
through are the same for all cases). The multiple plots are the data
sets at different temperatures. I would like to draw connection lines
between the points as a guide to the eye.
I also want the plot to be updated in the innermost for loop in real
time as the data are measured. I have a VI working using nested loops
as described above and passing the 4D array through shift registers,
starting with an array of the right dimensions initialized by zeroes. I
know in advance how many times all the loops have to be executed, and I
use the ReplaceArraySubset function to add the measured properties each
time. I then use IndexArray with the part and property index terminals
wired to extract the 2D array containing the data I want to plot. After
some transformation to combine these data with an array of the voltage
values in the form required to pass to the XYGraph control, I get my
plot.
The problem is: During program execution, when only partial data is
available, all the zero elements in the array do not allow the graph to
autoscale properly, and the lines between the points make little sense
when they jump to zero.
Here is how I think the problem could be solved:
1. Start with an empty array and have the array grow gradually as the
elements are measured. I tried to implement this using Insert Into
Array. Unfortunately, this VI is not as flexible as the Replace Array
Subset, and does not allow me to add a 1D array to a 4D array. One
other option would be to use the Build Array, but I could not figure
out if this is usable in this case.
2. The second option would be to extract only the already measured data
points from the 4D array and pass them to the graph
3. Keep track of the min. and max. values (only when they are different
from zero) and manually reset the graph Y axis scale each time.
Option 3 is doable, but more work for me.....
Option 2: I first tried to use Array Subset, but this always returns an
array of the same dimensionality of the input array. It seems to be
very difficult, but maybe not impossible, to make this work by using
Index Array first followed by Array Subset. Option 3 seems easier.
Ideally, I would like option 1, but I cannot figure out how to achieve
this.
Your help is appreciated, thanks in advance!
germ Remove "nospam" to reply

In article <[email protected]>,
chutla wrote:
> Greetings!
>
> You can use any of the 3D display vi's to show your "main" 3d
> data, and then use color to represent your fourth dimension. This can
> be accessed via the property node. You will have to set thresholds
> for each color you use, which is quite simple using the comparison
> functions. As far as the data is concerned, the fourth dimension will
> be just another vector (column) in your data file.
chutla, thanks for your post, but I don't want a 3D display of the
data....
> Also, check out
> the BUFFER examples for how to separate out "running" data in real
> time.
Not clear to me what you mean, but will c
heck the BUFFER examples.
> As far as autoscaling is concerned, you might have to disable
> it, or alternatively, you could force a couple of "dummy" points into
> your data which represent the absolute min/max you should encounter.
> Autoscaling should generally be regarded as a default mode, just to
> get things rolling, it should not be relied on too heavily for serious
> data acquisition. It's better to use well-conditioned data, or some
> other means, such as a logarithmic scale, to allow access to all your
> possible data points.
I love autoscaling, that's the way it should be.
germ Remove "nospam" to reply

How to maintain data in tables using maintenace view of the tables in ECC6

Hi,
I have two table SBUSPART (Business partner) and STRAVELAG (Travel agency).
SBUSPART is foreign key table while STRAVELAGE is a reference table. The relationships is :
        SBUSPART-MANDANT          =     STRAVELAGE-CLIENT
        SBUSPART-BUSPARTNUM    =     STRAVELAGE-AGENCYNUM
now, I create a maintenance view ZVI_HT_PARTNER in which SBUSPART is primary table and STRAVELAGE is secondary table. I have also created maintenace interfaces by generating maintenance modules in function group zht_fg. Authorization group is SUNI and maintenance type is one-step, the number maintenace screen is 100.
Now I want to maintain the data in tables SBUSPART and STRAVELAGE together in the maintenace view. If i want to enter a new partner dirctly I have to enter it in table SBUSPART first, only then could I enter the corresponding data in STRAVELAGE.
in older version I easyly do this by the way: in maintenace screen of zvi_ht_partner ( in se11) I choose: system/ services/table maintenace/Enhance.Tab.maintain.
but in ECC6 when I choose: system/ services/table maintenace, there is no Enhance.Tab.maintain instead there are two options Extended table maintenace and View cluster maintenace.
So in this case I don't know how to tackle this problem, Please help me if you have a solution.
Thanks,

Hi,
    I suppose 'Extended table maintenace ' would be same as 'Enhance.Tab.maintain'.
Regards,
Himanshu

How to maintain data of a table after I created the structure of it?

If I does not create a maintain view in SM30, can I also be able to input data without writing a programme.
Best regards,

Check the check box of
Table Maintainence allowed in Attributes tab of table
and then go to
utilities->table contents->create Entries.
Reward if useful.
Devi

How to put data from database into array

I need to answer hot to put data from database directly into array.
I tried like the code below but the error message said: java.lang.ArrayIndexOutOfBoundsException: 0, and it points to this line: numbers [row][0]= rs.getString("ID");
Hope you can help.
ResultSet rs = stmt.executeQuery(query);
     int row=0;
     String [] [] numbers=new String [row][10];
     // output resultset
     while ( rs.next() )
          numbers [row][0]= rs.getString("ID");
          numbers [row][1]= rs.getString("name");
     row++;
     // close resultset
     rs.close();
thanks,Devi

The exception is been thrown simply because you assigned '0' to the 'row' variable, indicating a zero length of the array. In fact you should assign the row count to it.
After all, don't do that. Make use of the Collection framework and map the ResultSet to a Collection of DTO's.
List<User> users = new ArrayList<User>();
while (resultSet.next()) {
    User user = new User();
    user.setID(resultSet.getString("ID"));
    user.setName(resultSet.getString("name"));
    users.add(user);
}

How to alternate data storage into 2 arrays with an analog square wave input? (seems that the retriggerable function is not supported by my PXI card)

Hi!
I'm trying to have an analog square wave input determine where data gathered from a second analog input channel is stored. I want data to be stored to one array during the high signal period of the square wave and data to be store to another array during the low signal period of the square wave. The square wave I'm using is of constant frequency (8.3 Hz). I believe I need to use an analog input wave as opposed to a onboard clock or other timing mechanism because my square wave is also being used to modify the input going into my experimental setup. Thus the data storage needs to be correlated to the timing of the data modification in the experiment. I tried to use the retriggerable property node function, but receive error 200452, which I think means that my PXI card (6115) can't support this retriggerable function. So I'm looking for other ways to accomplish alternating data storage in response to an incoming analog square wave. Any help would be GREATLY appreciated... Thanks! (I'm also quite new with LabView so toddler-type explanations would probably be most useful )
-Shari
(LabView version 8.6)
Attachments:
Pulsed_Acq_Switch_Simplified.vi ‏47 KB

Hello Shari,
I am looking at your situation and it seems very intriguing. after downloading your file I have a couple questions to ask if you don't mind answering.
Currently in your program you are only taking one sample of data at a time, this could lead to uneven sampling. Would you like to sample at a consistent rate (say 10 Kilosamples of data a second?) if so what type of card are you using?
Also, Do you want your data to be in a 2-D array of data?
Best Wishes,
Daniel

Use boolean array to perform set operations

I am currently taking a computer science class that uses Java as the language of choice. I have no prior experience with Java. We have a homework assignment in which we are supposed to use a boolean array to implement set operations. We have to create a method that inserts an integer into the array, another that deletes an integer element, and several others. I am confused as how to do this with integers, as it is a boolean array. The datr for this class is:
private boolean base[];The constructor is:
public largeset(int size){ }We then have to create a method that inserts an integer into the array:
public void insert(int i){ }And one that deletes the element:
public void delete(int i) { }I am unsure how to do this using a boolean array. If it were an integer array I would not have any trouble, but I get an error when trying to insert/delete an integer from the boolean array. Can anyone help point me in the right direction? I would prefer advice only, not the actual code, as this is a homework assignment, and I would like to create the code myself so I actually know what I am doing. Thanks.

This is the assignment exactly as posted on the course website:
In this homework, we will use a boolean array to implement various set operations. Please create a class called largeset that supports set operations of any number of elements. The data of this class is
private boolean[] base;The constructor of the class is
public largeset(int size); // create a boolean array of size "size" and store it in "base"The methods of the class are:
public void insert(int i); // insert number i into the current set, where 0 <= i < base.length
public void delete(int i); // delete number i from the current set, where 0 <= i < base.length
public boolean member(int i); // test if i is in the set
public largeset union(largeset B); // return the union of two sets
public largeset interset(largeset B); // return the intersection of two sets
public largeset subtract(largeset B); // return the subtraction of two sets
public largeset complement(); // return the complement of the current set
public boolean subset(largeset B); // test if the current set is a subset of set B
public int cardinality(); // return the number of elements in the current set
public String toString(); // return a string which is a printing of the current setThen create another class called testset that uses the largeset class. At first, please create the following two sets:
X = { 1, 3, 5, 7, ..., 999 };
Y = { 9, 18, 27, 36, ..., 999 };
Please perform the following tests:
1. display the cardinalities of X and Y, respectively.
2. display the content of substraction of Y by X.
3. display the square root of the sum of all the elements of X (Math.sqrt(x) will return the square root of x in double type).
4. For every pair of distinct elements x and y in Y, compute the sum of (Math.max(x, y) - Math.min(x, y)) (or equivalently, Math.abs(x - y)), and report this sum.

How do I return a Boolean array from LabView to TestStand?

I am trying to return a Boolean array from Labview to TestStand and have TS evaluate the results. I can do this for arrays of integers or reals but booleans do not work. I tried copying the PassFailTest step type and adding an array of Bool but I couldn't get it to evaluate the array. It simply always passed. How can this be done?
Bob A.

I have thought about evaluating the Boolean data in TestStand but, as you say, this is a lot of work. What I have been doing is to map the boolean data to integers in LV (very easy) and then use the multiple numeric step type to evaluate the integer array automatically. This feels kludgy and I have tried a couple of times to create a "multiple boolean" step type with little success. I'm surprised TS hasn't anticipated a test returning multiple pass/fail results. I do this all the time for production code.
What I have tried is to copy MultipleNumericLimitsTest data type to a custom type and add a BooleanArray with a data type Array of Boolean[0..empty]. Then when I specify module, I select Step.BooleanArray as the value. The last step (that I know of) is to select Step.BooleanArray as the data source in the edit limits window. At this point if I run the test, I get the error "expect numeric, found boolean" (or something similar). When I look at the properties of my custom step type, the Substeps has DoMultiNumericMeasEvaluation as the Post-Step. I believe this is the root of my problem but I can't figure out how to change this to "DoMultiBooleanMeasEvaluation" or similar. Any Ideas?

How to maintain material master data in plant....

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Hi,
Please check the below link for MMR creaion .
http://web.mit.edu/sapr3/windocs/bpmdb01m.htm
Regards,

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

How to maintain data in a boolean array

Similar Messages

Maybe you are looking for