How to make a call in j2me using bluetooth?

Hi All,
I wanted to make a call to another device which is in my bluetooth range i wanted to know how to make such a call?And i have heard that using bluetooth for making calls we can only do half duplex communication that is at a time only one person can speak while the other hears ?I wanted to know that can we do a full duplex communication also so that both of them can speak as well as listen at a time.
Thanks

To make a call using javax.microedition.midlet.MIDlet.platformRequest().
for eg:
String telNo = "tel:+9682651761543";
platformRequest(telNo );

Similar Messages

  • How to make a call in j2me using bluetooth technology?

    Hi All,
    I wanted to make a call to another device which is in my bluetooth range i wanted to know how to make such a call?And i have heard that using bluetooth for making calls we can only do half duplex communication that is at a time only one person can speak while the other hears ?I wanted to know that can we do a full duplex communication also so that both of them can speak as well as listen at a time.
    Thanks

    To make a call using javax.microedition.midlet.MIDlet.platformRequest().
    for eg:
    String telNo = "tel:+9682651761543";
    platformRequest(telNo );

  • How to make a call in J2ME MIDLET

    How to activate a call in J2ME ?
    Eg. On click of an icon a call should be made to a predifined number in the app.

    To make a call using javax.microedition.midlet.MIDlet.platformRequest().
    for eg:
    String telNo = "tel:+9682651761543";
    platformRequest(telNo );

  • How to make a call from calendar using a number in my calendar?

    One of the few frustrating things about the iphone is how I cannot seem to find a way to dial a conference call number that is in my calendar nor dial the passcodes required for most business conference calls. In my case, I am synchronizing with Outlook Exchange. Unlike a number that appears in email being automatically "clickable," the lengthy and hard to remember 1-888 numbers and the pass codes show up as just text. Is there a workaround or an app to help with dialing into conference bridges? Otherwise, even with the power of an iPhone 4, I am still writing pass codes and numbers on napkins in the car. Thanks for any tips!!

    I also do a lot of conference calls and was so frustrated by this that I wrote an app to solve this exact issue. It queries the calendar and does pattern matching against the text in the calendar item, including the location field, and presents them so you can dial them directly.  Apparently this is not an uncommon complaint.  It has been selling pretty well. Check it out at: http://itapless.com/products

  • I have 3G sim card how to make reugular call in ipad air 4G. tell me.

    i have 3G sim Card how to make regular call in ipad iar 4G. tell me.

    You have to use an app such as Skype or Viber. iPad has no
    telephone capability as sim is data only.

  • How to make a call  to service from site studio templates?

    Hi,
    May be this is very basic but I am not able to figure out how to make a call to a service from site studio templates (hcsp). I have seen one example of service call in the dynamic list fragment. It makes a call to SS_GET_SEARCH_RESULTS service using executeService() method. But it doesn't take any parameters and also not very how returned results are captured.
    I want to execute WCM_PLACEHOLDER service. It takes 2 main parameters dataFileDocName and templateDocName. The returned result is typically a html response.
    The service typically is executed using http request and the url would be something like this
    http://hd-pratapm/ucm/idcplg?IdcService=WCM_PLACEHOLDER&dataFileDocName=VIRTUSAINC&templateDocName=DETAILS_REGION_TEMPLATE
    I think SS_GET_SEARCH_RESULTS service works in the similar fashion. I want to execute WCM_PLACEHOLDER service too using executeService() method. How to work with this? How can we pass parameters and capture returned results?
    Regards,
    Pratap

    Hey Pratap,
    If you are on a standard Site Studio template (page or subtemplate) you should be able to call the wcmPlaceholder idoc function directly. In fact calling the idoc function provides a lot more functionality then the service call (they locked down a few things in the service call since it is designed to be called from an external application).
    The idoc call would look something like: <!--$wcmPlaceholder("Sales", "placeholderDefinitionDocName=placedef_salescontact")--> (taken from page 208 in this doc: http://download.oracle.com/docs/cd/E10316_01/SiteStudio/10gr4/Pdf/Site_Studio_10gR4_Designer_Guide.pdf)
    As a general note when you are in idoc script and want to execute a service you call <$executeService()$> as you saw in the dynamic list. The parameters that the service runs on are in the data binder of the current request. To set parameters for an execute service you simply set idoc variables on the page before it. Example:
    <!--$QueryText="dDocType <matches> `Document`" -->
    <!--$executeService("GET_SEARCH_RESULTS")-->
    As for the response when you execute an idoc function, like wcmPlaceholder, that returns a String the response is immediately output to the page in the location you called the function. This would be similar in concept to a jsp scriptlet that outputs a string <%=myResponseString%>
    Hope that helps,
    Andy Weaver - Senior Software Consultant
    Fishbowl Solutions < http://www.fishbowlsolutions.com?WT.mc_id=L_Oracle_Consulting_amw_OTN_ECM >
    Edited by: Andy Weaver on Jul 7, 2010 7:59 AM
    Added response detail.

  • How to make system call to execute command line in JAVA?

    Hi,
    I am new in JAVA. How to make system call to execute the following command line in JAVA in LINUX environment.
    rpm -qa jdkIn C programming, use as such:
    system ("rpm -qa jdk");
    How about JAVA?
    Thanks.

    Runtime.getRuntime().exec. But first read this:
    http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

  • How to make video calls on i phone 4s

    how to make video calls on i phone 4s

    kalidag
    Currently Being Moderated  Re: how to make video calls on i phone 4s
    Jan 30, 2012 1:35 AM (in response to wjosten)
    but we can make video call using our SIM network.. it charge morethan a voice call.I am looking for that on my i phone
    Dear cheonweb,
    The person asking about  3G video cal with out using GPRS(cellular network data plan or wifi) by using cellular network data plan it is possible but with out using cellular network data plan we cant make 3G video cal in apple phones.

  • How to make CSD call in NOKIA E71

    Hello,
    I bought two Nokia E71 mobiles with BSNL 3G connection. My service provider(BSNL) providing 3G service. E71 is connected to PC there i dialed to another phone which is conneted to other PC. when i dialed from hyperterminal in winxp by using ATD commnad with out semicolon. I am getting connection error messge on my phone. NO CARRIER on hyper terminal.
    I don't know what the problem is i tried with all commands no use. Is there any setting required for NOKIA E71. How to make data call (CSD call) by using Nokia E71.
    You help is very much appreciated..
    -Vijender

    Hi
    this may or may not be of help.
    I was having a similar problem with a 6230i.
    When trying to make a data call  the No Carrier signal would come back.
    After some research I changed +cbst form 0,0,1 to 7,0,1
    at+cbst=7
    This apparently gives the receiving modem more time to connect. It sends the no carrier signal 30 seconds later after appearing to connect, I still dont get the connect 9600 response.

  • How would 2 people call each other using facetime if both were in a foreign country but staying at different locations within that country?

    How would 2 people call each other using facetime if both were in a foreign country but staying at different locations within that country?

    It's tied to the Apple ID also - I believe it would use that to find the right person/device.
    Perhaps this article would help: http://support.apple.com/kb/HT4319. It looks like you may want to go in through your contacts and make the call.
    If you're concerned about data charges, put your phone in Airplane mode before trying to Facetime. That will prevent it from trying to make a call over your cellular data.
    ~Lyssa

  • Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times

    Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
    Please help to set it up, thanks in advance

    You need to give more info..
    Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
    Most likely you have bridged it when it should be in router mode..
    Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
    Change it to working as a router. That might help.
    If you press reset button it will default back to router btw.
    If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547

  • How to make Avery 8160 address labels using pages

    Anyone know how to make Avery 8160 address labels using Pages? 

    Open the Avery 8160 Word template from their website.
    Peter

  • How to make Conference Call in Xperia Z1

    How to make conference call in Xperia Z1. First of all I am not sure whether that facility is available in Z1. 

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I suggest that you take a look at the following link for further instructions about how to place conference calls:
    http://userguide.sonymobile.com/referrer.php?region=gb&product=xperia-z1#Conference-calls.html
    Note that this function needs to be enabled at your subscription from your operator in order to make it work.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • How can i record call when i use handfree

    How can i record call when i use handfree

    Define hands-free, are you using a headset/Bluetooth?
    To note, Recording is not a natively supported function of the iPhone. There are laws regarding this... and in America, both parties have to be notified/in-knowledge of being recorded.
    Where are you from? If outside the USA, Google Voice won't work.
    Have you looked into a VoIP provider that supports what you wish to do?

  • How to connect my ipad with mac using bluetooth?

    how to connect my ipad with mac using bluetooth?

    You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
    iOS: Supported Bluetooth profiles

Maybe you are looking for

  • Creating a string with hiearchical data

    This is being done in Crystal 8 will all updates applied. I have a database with records that are linked to a series of "folders" that are hierarchical in nature as shown below: Folder 1:      Folder 1.1           Folder 1.1.1 Folder 2     Folder 2.1

  • OSX Mountain Lion and Vienna Ensemble Pro 5

    I'm about to assume that I've made a mistake, but I don't like assuming ...maybe someone can help me figure this out. THANKS in advance: I just completed the download of Vienna Ensemble Pro 5 w/ a 9Gb Demo Library The stand-alone app, and probable th

  • ERROR in Opening and RUNNING. EXE and .RAR files of Third Party softwarea

    Hello, I downloaded  third party softwares having .EXE and .RAR file extension. But none of these files open up  and I can NOT RUN them and install them on my WINDOWS 7  System. It is possible , some of the associations of these files might have been

  • Searching for books in the bookstore

    Is it possible to configure the iBooks with some keywords on the apple book store?   Currently they do not show up in search results when some specific keyword searches are used.  Or would I have to make sure these keywords appear in the books descri

  • Stopping a process remotely

    Dear, Is there a way to stop a process, if we know the GUID, using a webservice? Regards, Frederik-Jan