How to make a call in J2ME MIDLET

How to activate a call in J2ME ?
Eg. On click of an icon a call should be made to a predifined number in the app.

To make a call using javax.microedition.midlet.MIDlet.platformRequest().
for eg:
String telNo = "tel:+9682651761543";
platformRequest(telNo );

Similar Messages

How to make a call in j2me using bluetooth?

Hi All,
I wanted to make a call to another device which is in my bluetooth range i wanted to know how to make such a call?And i have heard that using bluetooth for making calls we can only do half duplex communication that is at a time only one person can speak while the other hears ?I wanted to know that can we do a full duplex communication also so that both of them can speak as well as listen at a time.
Thanks

To make a call using javax.microedition.midlet.MIDlet.platformRequest().
for eg:
String telNo = "tel:+9682651761543";
platformRequest(telNo );

How to make a call in j2me using bluetooth technology?

Hi All,
I wanted to make a call to another device which is in my bluetooth range i wanted to know how to make such a call?And i have heard that using bluetooth for making calls we can only do half duplex communication that is at a time only one person can speak while the other hears ?I wanted to know that can we do a full duplex communication also so that both of them can speak as well as listen at a time.
Thanks

To make a call using javax.microedition.midlet.MIDlet.platformRequest().
for eg:
String telNo = "tel:+9682651761543";
platformRequest(telNo );

I have 3G sim card how to make reugular call in ipad air 4G. tell me.

i have 3G sim Card how to make regular call in ipad iar 4G. tell me.

You have to use an app such as Skype or Viber. iPad has no
telephone capability as sim is data only.

How to make a call to service from site studio templates?

Hi,
May be this is very basic but I am not able to figure out how to make a call to a service from site studio templates (hcsp). I have seen one example of service call in the dynamic list fragment. It makes a call to SS_GET_SEARCH_RESULTS service using executeService() method. But it doesn't take any parameters and also not very how returned results are captured.
I want to execute WCM_PLACEHOLDER service. It takes 2 main parameters dataFileDocName and templateDocName. The returned result is typically a html response.
The service typically is executed using http request and the url would be something like this
http://hd-pratapm/ucm/idcplg?IdcService=WCM_PLACEHOLDER&dataFileDocName=VIRTUSAINC&templateDocName=DETAILS_REGION_TEMPLATE
I think SS_GET_SEARCH_RESULTS service works in the similar fashion. I want to execute WCM_PLACEHOLDER service too using executeService() method. How to work with this? How can we pass parameters and capture returned results?
Regards,
Pratap

Hey Pratap,
If you are on a standard Site Studio template (page or subtemplate) you should be able to call the wcmPlaceholder idoc function directly. In fact calling the idoc function provides a lot more functionality then the service call (they locked down a few things in the service call since it is designed to be called from an external application).
The idoc call would look something like:  (taken from page 208 in this doc: http://download.oracle.com/docs/cd/E10316_01/SiteStudio/10gr4/Pdf/Site_Studio_10gR4_Designer_Guide.pdf)
As a general note when you are in idoc script and want to execute a service you call <$executeService()$> as you saw in the dynamic list. The parameters that the service runs on are in the data binder of the current request. To set parameters for an execute service you simply set idoc variables on the page before it. Example:


As for the response when you execute an idoc function, like wcmPlaceholder, that returns a String the response is immediately output to the page in the location you called the function. This would be similar in concept to a jsp scriptlet that outputs a string <%=myResponseString%>
Hope that helps,
Andy Weaver - Senior Software Consultant
Fishbowl Solutions < http://www.fishbowlsolutions.com?WT.mc_id=L_Oracle_Consulting_amw_OTN_ECM >
Edited by: Andy Weaver on Jul 7, 2010 7:59 AM
Added response detail.

How to make system call to execute command line in JAVA?

Hi,
I am new in JAVA. How to make system call to execute the following command line in JAVA in LINUX environment.
rpm -qa jdkIn C programming, use as such:
system ("rpm -qa jdk");
How about JAVA?
Thanks.

Runtime.getRuntime().exec. But first read this:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

How to make video calls on i phone 4s

how to make video calls on i phone 4s

kalidag
Currently Being Moderated Re: how to make video calls on i phone 4s
Jan 30, 2012 1:35 AM (in response to wjosten)
but we can make video call using our SIM network.. it charge morethan a voice call.I am looking for that on my i phone
Dear cheonweb,
The person asking about 3G video cal with out using GPRS(cellular network data plan or wifi) by using cellular network data plan it is possible but with out using cellular network data plan we cant make 3G video cal in apple phones.

How to make Conference Call in Xperia Z1

How to make conference call in Xperia Z1. First of all I am not sure whether that facility is available in Z1.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I suggest that you take a look at the following link for further instructions about how to place conference calls:
http://userguide.sonymobile.com/referrer.php?region=gb&product=xperia-z1#Conference-calls.html
Note that this function needs to be enabled at your subscription from your operator in order to make it work.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How to make CSD call in NOKIA E71

Hello,
I bought two Nokia E71 mobiles with BSNL 3G connection. My service provider(BSNL) providing 3G service. E71 is connected to PC there i dialed to another phone which is conneted to other PC. when i dialed from hyperterminal in winxp by using ATD commnad with out semicolon. I am getting connection error messge on my phone. NO CARRIER on hyper terminal.
I don't know what the problem is i tried with all commands no use. Is there any setting required for NOKIA E71. How to make data call (CSD call) by using Nokia E71.
You help is very much appreciated..
-Vijender

Hi
this may or may not be of help.
I was having a similar problem with a 6230i.
When trying to make a data call the No Carrier signal would come back.
After some research I changed +cbst form 0,0,1 to 7,0,1
at+cbst=7
This apparently gives the receiving modem more time to connect. It sends the no carrier signal 30 seconds later after appearing to connect, I still dont get the connect 9600 response.

How to login into yahoo from j2me midlet?

Hi all,
I want to login into yahoo from my j2me midlet and chat with more than one user in my friendlist?How to proceed for doing this?Plz help?What all will be required for doing this
Thanks
Sagar

ask to yahoo to know if it's possible...

How to make a call from a Web page

How can I make a call from a number on a Web page ?
If I select the number, I can only copy it ... then I cannot cut and paste into the phone dialing section ???
I thought that by selecting the number on the Web page and holding it this would trigger the dialing ... like I used to do with my 9900 Bold BB.

Are you holding the number or just pressing it quickly? Holding anything will produce a menu whose options would include cut & paste but just pressing the number should activate an action, in this case dialing the number.
Try just pressing the number with a normal press and not holding it and post back with your results.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

How to make HTTP connection between a midlet and a php server?

As the title above, can anyone share how to make a HTTP connection between those 2? J2ME and PHP. Thanks a lot!

Can you be a little more specific on what you really want.
When i started doing j2me application, i was required to be able to comunicate to a oracle client database, and my first though was using PHP based pages to comunicate and do the query. Later they would just generate the answer and get it on the cellphone. You can communicate with a PHP server via either GET or POST. I'd choose POST as is more secure IMO.
Here are quite a good ammount of examples of how you can do it
http://www.java2s.com/Code/Java/J2ME/Networks.htm
They aren't PHP based examples, but you have can an idea of how it can be done

How to make a call in Javascript to export a Report Element - The content of a cell

Hi everyone,
I have a very simple question :
How can I make a call to the API in order to export a single cell in the WEBI report in .CSV using httpRequest ?
Thanks in advance,
Rogerio

hello,
You can try the URL:
[GET] <url>/documents/{documentId}/reports/{reportId}/elements/{elementId}
... with text/csv as Accept-Type and a trailing reference or datapath.
Examples
<url>/documents/7610/reports/1/elements/13?datapath=DP1.DObc:"2004",DP1.DOa6:"Austin"
<url>/documents/7610/reports/1/elements/13?reference=1.D.7
Regards,
eric festinger

How to make voip calls on ipad1

Hi, can anyone tell me how to go about making cheap voip calls on the ipad 1 as it only has an ear plug point and not a microphone one? being a pensioner I`m trying to save money!! thanks in anticipation.

Although I don't own all of the iDevices, I do know from experience that my iPod Touch (2nd gen up) and the iPads + iPhones can indeed make VOIP calls from various services. The harder part is finding a way to listen and talk conveniently and understanding your VoIP service capabilities.
1.
The VoIP software - presumably something you already use today on a computer and have an account/telephone number for.
Skype
Google Talk
magicJack
etc.
The choices depend a lot on who you primarily talk with and what they use (conventional telephone, Skype, etc)
I prefer a full fledged SIP (VOIP) clients like iSIP or my personal favourite the Bria VoIP phone software with a VOIP telephone number from a standalone VoIP provider like voip.ms but that may be too complicated a setup for some. It does provide the best telephone experience however. I'm not sure which players are strong in the UK.
Some of these only work when you have a a WiFi connection but I regularly use the Bria phone on my iPad while driving (3G and LTE both work fine).
2.
The audio connection - the easiest is a combined headset/microphone like the simple Apple earpiece or other third party ones that have both ear and microphone in a single plug (you can tell which is which because there are 3 rings/4 gold contacts on the plug). Ask around - many iPhone users have these included in the box and never use them, preferring more expensive after market models).
Another more sophisticated way is to use a bluetooth headset of any kind. These can be very comfortable and work well, but are not as easy as simply plugging in a headpiece. Batteries need charging and the bluetooth connection can be finicky sometimes.
A third option around the home is to use one of the newer telephone sets that has bluetooth connectivity to the ipad/iphone - this is elegant but also more complicated than you would probably enjoy unless you're handy with the technology.
I'd recommend you have someone familiar with the Apple world who's a bit techie, can help you think through your requirements around calling patterns and volumes and clearly understands that you likely prefer ease of use over saving a few pence.

How to make local server in j2me

hi can i anyone help me out to establish a local server. i am using netbeans and dont know how to make loca server and how can i make the connection. i know about socket connection, http connection and datagram connection but dnt know about server connection where i can register my midlet and recieve data from it and post it aswell.
Best Regards
Naseem Sarwar

hi
write a servlet on ur server side for handling clients data and also it response back once data to another..
and simply on clients write HttpConnection code for sending/receiving data ..
always think abt optimiztaion of data send/recieve for speed.
regards
Akash Kumar & Nagendra
[email protected]
[email protected]
Indiagames Ltd

How to make a call in J2ME MIDLET

Similar Messages

Maybe you are looking for