How to make a category required for all files created within a folder

I've defined a category. It has attributes which have been flagged as required.
When I view the properies of a particular workspace (library), the category is shown as available to the workspace. However, the category is not shown as required. And the "required" checkbox is not clickable.
So .. how, from the OCS DHTML applet, do I make a particular category a required category for all files in a folder?

Perhaps the Category Attribute is not marked as "configurable" when it was created. You can check this by "switching into Admin Mode" and drilling down the Categories using "Manage Categories" link. Check if the category attribute is marked as configurable or not.
Ravikiran

Similar Messages

How to make saved IR available for all users

Hi,
I've created IR and saved it to several tabs based on search conditions.
But they're only visible for developers.
How to make these tabs available for all end-users ?
Does version 4.0 support this option ?
Thank you!

Hi
At present this feature is not included, although I believe it may be in 4.0. Many people have provided workarounds for this. None of which I have tried. I cannot find the original thread but here is a solution from a chap called Ruud
>
One way to share your saved reports with others is to 'Publish' your report settings to a few intermediate tables in your application and have other users 'Import' your settings from there. The reason for using intermediate tables is so that not all your saved reports need to be 'visible' to other users (only those that you've chosen to publish).
Basically you have available the following views and package calls that any APEX user can access:-
- flows_030100.apex_application_pages (all application pages)
- flows_030100.apex_application_page_ir_rpt (all saved reports - inclusing defaults and all user saved reports)
- flows_030100.apex_application_page_ir_cond (the associated conditions/filters for above saved reports)
- wwv_flow_api.create_worksheet_rpt (package procedure that creates a new saved report)
- wwv_flow_api.create_worksheet_condition (package procedure that creates a condition/filter for above saved report)
The way I've done it is that I've created 2 tables in my application schema that are straightforward clones of the 2 above views.
CREATE TABLE user_report_settings AS SELECT * FROM flows_030100.apex_application_page_ir_rpt;
CREATE TABLE user_report_conditions AS SELECT * FROM flows_030100.apex_application_page_ir_cond;
( NB. I deleted any contents that may have come across to make sure we start with a clean slate. )
These two tables will act as my 'repository'.
To simplify matters I've also created 2 views that look at the same APEX views.
CREATE OR REPLACE VIEW v_report_settings AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_rpt r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND r.session_id IS NULL
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
CREATE OR REPLACE VIEW v_report_conditions AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_cond r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
I then built 2 screens:-
1) Publish Report Settings
This shows 2 report regions:-
- Region 1 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT apex_item.checkbox ( 1, report_id ) " ",
page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY page_name,
report_name
Each row has a checkbox to select the required settings to publish.
The region has a button called PUBLISH (with associated process) that when pressed will copy the settings from
V_REPORT_SETTINGS (and V_REPORT_CONDITIONS) into USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
- Region 2 - Shows a list of already published reports in table USER_REPORT_SETTINGS (again filtered for your user)
SELECT apex_item.checkbox ( 10, s.report_id ) " ",
m.label,
s.report_name
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user = :APP_USER
AND ( s.page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY m.label,
s.report_name
Each row has a checkbox to select a setting that you would like to delete from the repository.
The region has a button called DELETE (with associated process) that when pressed will remove the selected
rows from USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
NB: P27_REPORT is a "Select List With Submit" to filter the required report page first.
Table MENU is my application menu table where I store my menu/pages info.
2) Import Report Settings
This again shows 2 report regions:-
- Region 1 - Shows a list of all published reports in table USER_REPORT_SETTINGS (filtered to show only other users saved reports)
SELECT apex_item.checkbox ( 1, s.report_id ) " ",
m.label,
s.report_name,
s.application_user
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user :APP_USER
AND ( s.page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY m.label,
s.report_name,
s.application_user
Each row has a checkbox to select the setting(s) that you would like to import from the repository.
The region has one button called IMPORT that when pressed will import the selected settings.
It does this by using the 2 above mentioned package procedure to create a new saved report for you
with the information form the repository. Be careful to match the right column with the right procedure
parameter and to 'reverse' any DECODEs that the view has.
- Region 2 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY page_name,
report_name
This is only needed to give you some feedback as to whether the import succeeded.
A few proviso's:-
a) I'm sure there's a better way to do all this but this works for me :-)
b) This does not work for Computations! I have not found an API call to create computations.
They will simply not come across into the repository.
c) If you import the same settings twice I've made it so that the name is suffixed with (2), (3) etc.
I did not find a way to update existing report settings. You can only create new ones.
d) Make sure you refer to your saved reports by name, not ID, when matching APEX stored reports and the
reports in your repository as the ID numbers may change if you re-import an application or if you
auto-generate your screens/reports (as I do).
Ruud
>
To me this is a bit too much of a hack and I personally wouldn't implement it - it's just an example to show it can be done.
Also if you look here in the help in APEX Home > Adding Application Components > Creating Reports > Editing Interactive Reports
...and go to the last paragraph, you can embed predicates in the URL.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Edited by: Munky on Jul 30, 2009 8:03 AM

How to make warehouse field inactive for all users in all documents autom.

Hi All,
Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
Thanks & Regards,
Mukesh Agrawal

Hi,
As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
And set this warehouse as default warehouse for all users.
So without selecting the appropriate warehouse the user can not add the document.
I think this might resolve you issue.

How to update managed metadata column for all file in document library using powershell

Hi,
How to update managed metadata column for all file in document library using powershell?
Any help on it.
Thanks & REgards
Poomani Sankaran

Hi TanPart,
I have changed the code which you have give in order to get the files from SharePoint 2010 Foundation Document Library.But i am getting below error in powershell.
Property 'ListItemCollectionPosition' cannot be found on this object; make sure it exists and is settable.
Could you tell me which is the issues in it?
See the code below.
$web = Get-SPWeb http://ntmoss2010:9090/Site
$list = $web.Lists["DocLib"]
$query = New-Object Microsoft.SharePoint.SPQuery
$query.ViewAttributes = "Scope='Recursive'";
$query.RowLimit = 2000
$caml = '<Where><Contains><FieldRef Name="Title" /><Value Type="Text">Process Documents/Delivery</Value></Contains></Where>' +
        '<OrderBy Override="TRUE"><FieldRef Name="ID"/></OrderBy>'
$query.Query = $caml
do
    $listItems = $list.GetItems($query)
    $spQuery.ListItemCollectionPosition = $listItems.ListItemCollectionPosition
    foreach($item in $listItems)
        #Cast to SPListItem to avoid ambiguous overload error
        $spItem = [Microsoft.SharePoint.SPListItem]$item;
        Write-Host $spItem.Title
while ($spQuery.ListItemCollectionPosition -ne $null)
Thanks & Regards
Poomani Sankaran

How to make it a default for all received messages to not preview the attachment but instead show the icon? (mac mail.app)

Hi
I am having trouble with large incoming mail attachments.
When I receive a large attachment (pDf) the useful mail preview feature attempts to show a preview of the attachment. Unfortunately this is causing a lot of trouble as some PDFs are extremely large and therefore take time to open/preview. If I right click the attachment and select view as icon, the problem with that specific message ceases as the attachment is no longer previewed.
How can I make it the default for all attachments in received messages to only be shown as a icon and not previewed?

In Terminal,
defaults write com.apple.mail DisableInlineAttachmentViewing -bool Yes

How to make a virtual view for all the incoming messages from several accounts, just like in Opera Mail?

I want to have a replication of Opera mail feature. This feature enables you to aggregate all mail items from across all the e-mail accounts into a single virtual aggregated view.
That is, say, we have 3 different mail accounts. In Mozilla Thunderbird on a daily basis I check if there is something new in the incoming folder for those accs. To do that I click on the corresponding folder for every account. Now, what i want is to click on a single folder where I would have an aggregated virtual view of the incoming folder for all of those 3 accounts. I guess, same thing can be done with different kinds of mails, such as:
* Unread messages (after having viewed the mail item, it automatically goes straight into "Sent messages" aggregate view, listed below)
* Read messages
* Sent messages
* Spam messages
* Drafts, etc
Also there is this cool feature (virtual thing applies here as well) that helps to have a view of all the attachments across all accounts categorized into different descriptions, such as:
* docs (xls, doc, ppt, etc)
* images (jpg, png, etc)
* archives (zip, rar, etc)
More then that, it would still be better to have labling aggregation view feature across all acounts. That is, if we have marked important several messages in, say, 2 accounts, those should be seen in a single aggregated virtual view under name, say, "Important messages". Same can be said with flags, todos, etc.

Pop mail accounts can be set up to use a Global Inbox. Imap mail accounts cannot.
However, there are various 'views' in Thunderbird. I would suggest you try 'Unified'. This creates a visual Inbox containing all Inbox messages with sub folders showing individual Inboxes, so you can still see them separately if required.
via Menu Bar;
View > Folders > Unified
Via Menu icon
Menu Icon > Folders > Unified.
This view would show all the 'Important' tagged emails, so you could them sort by Tag.

How to make Steam library available for all users

Hello!
Can someone tell me - how to make my Steam library available to ALL users of my iMac without sharing a password?
Or any other program of my account?

Hard drive level Users/Sharing - Do a Get Info on the folder (command - I) and set permissions to everyone read/write, then click the gear at the bottom - Apply to Enclosed Items.

How to make Pages default app for .doc files

How do you make Pages/Numbers the default app for all .doc/.xls files?

Welcome to Apple Discussions
Highlight a known Word document in the Finder, highlight it & choose Get Info from the File menu. In the Get Info box, click the triangle next to "Open With." Click on this drop-down menu & choose Pages. If Pages is not a choice, choose "Other" & navigate to the Pages application. Now click the "Change" button under the text that asks if you want to open all documents like this with Pages. Repeat with Excel documents & Numbers.
Be aware that the icons for these documents will be plain white icons.

How to make pdf's searchable for all words for multiple documents?

I scan hundreds of documents every week at work. These documents are mostly field invoices for industrial work. I have been saving them with the most important/most searched information as the file name so I can search that information from anywhere in my computer and easily find it. As the work we are doing and our customers are becoming more complex I am needing to search for documents by keywords that just would not be efficient to include all into the file name. I have tried OCR to no avail. After doing OCR on many many files, I will try to search for a word that is right in front of me and it says zero found. My ideal: to be able to search my computer from my desktop for a keyword (like I can with word or excel dosuments), and have all pdf's containing that keyword to populate. I have been working on this for far too long and am not finding the solution, so before I set out to find a new program instead of Adobe I'm hoping there is something out there I just don't know about yet. I have googled this issue til my fingertips are bruised and it always brings me back to: Use OCR! Not only hasn't it found any pdf using keywords (unless I have that specific document open), half of my files it gives me an error message stating those files can not be rendered OCR. The whole point of what I'm trying to do is to ensure I find EVERY SINGLE document that would have the keyword.
Please help! Thank you!!

So, park the PDFs that hold those scanner output images of text.
Now, using Acrobat Pro create an Action to OCR these PDF files and save.
Having been OCR'd these PDFs can have a Catalog index of the collection (built with Acrobat Pro).
Using the Catalog index you can use advanced search (the includes Boolean search).
Be well...

How to make Skype our user for all phones

Currently we are with TELSTRA. We wish to use Skype as our landline. How do we do this?

Hi, Fountaindale, and welcome to the Community!
I recommend contacting the Skype Manager customer service team for assistance:
Using Skype in your business
Transform the way your business works with cost effective and collaborative tools.
Contact our solutions team
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

How to make the stage transparent for SWF file being used in Dreamweaver

I have a SWF file in my Dreamweaver site, that plays correctly. The problem is that the stage is white and we would like it to be transparent. Searching the archives the following advice was given:
in your html embedding code you need to set the wmode parameter to be "transparent"
I'm wondering if this is the code in Dreamweaver or is this done in Flash. I'm working with CS5. Below is the code that matches the SWF file in Dreamweaver. I did change the wmode value from "opaque" to "transparent" and it didn't work.
Thanks for any assistance.
Sherri
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="650" height="400" id="FlashID" title="Convergence Gathering Title">
             <param name="movie" value="Flash/gold_dust_title.swf" />
             <param name="quality" value="high" />
             <param name="wmode" value="opaque" />
             <param name="swfversion" value="6.0.65.0" />
             
             <param name="expressinstall" value="Scripts/expressInstall.swf" />
             
             
             <object type="application/x-shockwave-flash" data="Flash/gold_dust_title.swf" width="650" height="400">
               
               <param name="quality" value="high" />
               <param name="wmode" value="opaque" />
               <param name="swfversion" value="6.0.65.0" />
               <param name="expressinstall" value="Scripts/expressInstall.swf" />
               
               <div>
                 <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
                 <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
               </div>
               
             </object>
             
           </object>

Yes, change this to "transparent" in ALL the places where wmode is shown
<param name="wmode" value="opaque" />
Second, be sure that there is in fact nothing covering the entire stage, like a big white rectangle.
Also, what is directly behind the .swf once it's on the Web page? If the background color of that page or the <div> that the .swf is in is white..... well then then .swf can have a transparent background but then the white from the Web page just shows thru.... so there's still a white background.
Be sure there is a non-white background on the Web page...
Window Mode (wmode) - What's It For?
There are three window modes.
Window
Opaque
Transparent
By default, the Flash Player gets its own hWnd in Windows. This means that the Flash movie actually exists in a display instance within Windows that lives above the core browser display window. So though it appears to be in the browser window, technically, it isn't. It is most efficient for Flash to draw this way and this is the fastest, most efficient rendering mode. However, it is drawing independently of the browser's HTML rendering surface. This is why this default mode (which is equivalent to wmode="window") doesn't allow proper compositing with DHTML layers. This is why your JavaScripted drop-down menus will drop behind your Flash movie.
In windowless modes (like opaque), Flash Player doesn't have a hWnd. This means that the browser tells the Flash Player when and where to draw onto the browser's own rendering surface. The Flash movie is no longer being rendered on a higher level if you will. It's right there in the page with the rest of the page elements. The Flash buffer is simply drawn into whatever rectangle the browser says, with any Flash stage space not occupied by objects receiving the movie's background color.
Best wishes,
Adninjastrator

How to make wild card search for a file using utl_file

Hi Everyone,
I want to write to a table from flat file.im using 9i release 2. can i perform filename* (wildcard) search n write to the matching files.
Regards
Manish

Sorry can i write from those files which matches the search criteria i mean the wildcard search
for e.g COVhj*

How do I save my CMYK font settings & make it avaliable for all files ?

How do I save my CMYK font settings & make it avaliable for all files ? (adobe PS indesign file)

Could you explain what you want to do a little bit better? CMYK and fonts aren't really related to each other.
Also, are you using Photoshop or InDesign?

How do you make Motion templates availabe for all users for FCPX?

How do you make Motion templates availabe for all users for FCPX?

Copy your Motion Templates folder that is in your Movies folder to the movies folder of your other users.

How to restrict bidders must response for all items?

hi experts
   we used SRM7.0 with Standalone Scenario.
   we need to restrict the bidder response for all items. in RFx items tab page, there is a checkbox 'RFX response Required for All items'. but it is doesn't work for this purpose. If the bidder reponse without price, they get warning message "Line 0001: '0' in the price field means that you are offering the item for free " . [there should be no free goods]
   how to solve it?    thanks in advance.
regards
    claud

Hi,
In RFx, in Item tab, you have an indicator "RFx Response required for all the items", but unfortunately it does not work! I don't know why?
One way to make it is, to do validation using BBP_DOC_CHECK_BADI. Other way is to create subline items under outline and check the "lot" indicator for the outlne. For this, you must have assigned HIER_SRM to the process type of RFx and RFx Response. Also refer to note 1267549 while making this assignment. Then if the bidder quotes for one item, then he/she has to quote for all items.
If you wanted to allow bidder to quote there own quantity check "Bidder can Change Quantities" in item tabl of RFx. Then the bidder gets separate columns as Required Quantity and Submitted Quantity. However note that, the system will not generate any message if the bidder quotes more than the required quantity. If you wanted to so, you need to validate the entry using the same BAdI.
Hope this has answered your question.
Ganapathi

How to make a category required for all files created within a folder

Similar Messages

Maybe you are looking for