How to make a Countdown timer Script for Live Streaming

I have flash media server...
Here's a Scenario:
User wants to do a Live broadcast.. But.. they don't want to
just press record and have it starting Streaming Right that second.
They need a Delay to prepare for their Live Broadcasts.
Whats the best way for a script for a user to decide how much
time delay they need before Recording Starts?
Ideally it would look like this:
There is a separate window that allows the user to set the
Self-Timer which will give them time to get ready for their live
broadcasts.
User sets length of Time Delay: 30 seconds, 1 minute, 2
minutes, or even up to 5 minutes.
User presses Start Broadcast or Record Button to start
streaming Live Video.
Then.. the Countdown Timer starts... and it displays in Big
Digits... the countdown on their screen... "3...2...1...
Broadcasting Live Now!"
How would I do this?
Hope someone can help

Open the widget library panel and follow the link to Adobe Muse Exchange.
There you find a fine little widget collection, named Andrews Prototypes.
Load it, double-click the file, and in your library you will find a countdown widget.

Similar Messages

Trying to figure out how to make a countdown timer...

Okay, so I finished my Java class for the semester (I got an A) =) and I'm trying to learn to make a countdown timer in my spare time. I just want something that I can add the date and time of what I'm counting down to into it and then just a simple GUI that sits on my desktop counting away. Of course the problem is I've never used time before in any of my assignments and so I'm really not sure how any of it should work. Anyone know any tutorials or methods/classes that could help me with something like this?
Thanks

I made something similar to that, it counts down in either seconds/minutes/hours/days to a specific date. I ended up doing a Google search and found a useful class called DateUtil that someone had written. It was very useful for doing all the nasty Calendar work and that kind of thing.
Besides that, the GUI should be really easy, especially if you have already done a semester of Java. I used an uneditable TextField.
Anyhow, I can put up some more detail if you need it, just ask.

How to add new room in LCCS for live streaming video using flex builder

Hi,
I have created a video conferencing functionality using LCCS. Now i want to create a room programatically.
So that user can create his own room and invite his/her friends.I am looking for solution on this.
Any guidance on this

Quick suggestion : the documentation has a whole section on this =) :
http://learn.adobe.com/wiki/display/lccs/06DeployingApplications
nigel

How to make Safari remember my password for sites whiteout promoting me? I mean i don't want to ask me if i want to save the password or not, just save it automatically to my keychain.

How to make Safari remember my password for sites whiteout promoting me? I mean i don't want to safari ask me if i want to save the password or not, can it just save it automatically to my keychain qhitout asking?

No. It's a safety feature. Select the appropriate response and the next time you visit, you won't be prompted.

How to make Add to Favorites Option for website?

Please Advice how to make Add to Favorites Option for the
Website.
Appreciated
Thank You

http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=189&threadid =1191543&highlight_key=y&keyword1=favorites

How to make a Colorful Gif Image for Holi

How to make a colorful Gif Image for Happy Holi 2014

Okay, I know this doesn't answer your question, but don't get me wrong. A logo is meant to be the way it was designed - upright, no flipping/ swiveling animation. Why exactly do you want to let your logo turn around?
If its to grab attention, why dont you consider animating the area on which your logo sits (header)? Or maybe add nice transitive slideshows on your main content area to add more interactivity?

How to make a contact form script

i need help in how to make a contact form script, and how to
insert it into dreamweaver ugent

Does your host support PHP? If so -
http://sourtea.com/articles.php?ref=30
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
COMING SOON - Infooki [unboxed]:
http://infooki.sourtea.com/
Web Dev Articles, photography, and more:
http://sourtea.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"alagie82" <[email protected]> wrote in
message
news:em6gmt$q2n$[email protected]..
>i need help in how to make a contact form script, and how
to insert it into
>dreamweaver ugent

How to make F7,F8,F10 disabled for security?

Hi alll,
Pls can any boady tell me ; how to make F7,F8,F10 disabled for security purposes?
Abdetu.

Hello Gerd
Thanks for reply,
i made a search for the file u mentioned
FMRWEB; i found it on path C:\orant\FORMS60
having the following :
# FMRWEB.RES is the key definition file for webforms. The syntax is:
# JFN : JMN : URKS : FFN : URFD (whitespace ignored)
# JFN = Java function number
# JMN = Java modifiers number
# URKS = User-readable key sequence (double-quoted)
# FFN = Forms function number
# URFD = User-readable function description (double-quoted)
# JAVA FUNCTION NUMBER
# 33 = PageUp
# 34 = PageDown
# 35 = End
# 36 = Home
# 37 = LeftArrow
# 38 = UpArrow
# 39 = RightArrow
# 40 = DownArrow
# 65 - 90 = Ctrl+A thru Ctrl+Z (These will always have the control
# modifier explicitly included, as well as any other
# modifiers that might be used.)
# 112 - 123 = F1 thru F12
# 9 = Tab (Ctrl+I, without the control modifier)
# 10 = Return (Ctrl+J, without the control modifier)
# JAVA MODIFIERS NUMBER
# Equal to the sum of the values for the modifier keys:
# 0 = None
# 1 = Shift
# 2 = Control
# 4 = Meta
# 8 = Alt
# FORMS FUNCTION NUMBER
# The Forms function numbers match the function numbers found in a
# typical Forms key binding file.
# USER-READABLE STRINGS
# The double-quoted strings appear when users click [Show Keys], and
# are used for this purpose only. These strings can be translated as
# needed. Note that the strings do not affect what actually happens
# when end users press a particular key sequence.
9 : 0 : "Tab" : 1 : "Next Field"
9 : 1 : "Shift+Tab" : 2 : "Previous Field"
116 : 0 : "F5" : 3 : "Clear Field"
38 : 0 : "Up" : 6 : "Up"
40 : 0 : "Down" : 7 : "Down"
33 : 0 : "PageUp" : 12 : "Scroll Up"
34 : 0 : "PageDown" : 13 : "Scroll Down"
69 : 2 : "Ctrl+E" : 22 : "Edit"
10 : 0 : "Return" : 27 : "Return"
76 : 2 : "Ctrl+L" : 29 : "List of Values"
115 : 0 : "F4" : 32 : "Exit"
75 : 2 : "Ctrl+K" : 35 : "Show Keys"
83 : 2 : "Ctrl+S" : 36 : "Commit"
118 : 1 : "Shift+F7" : 61 : "Next Primary Key"
117 : 0 : "F6" : 62 : "Clear Record"
38 : 2 : "Ctrl+Up" : 63 : "Delete Record"
117 : 1 : "Shift+F6" : 64 : "Duplicate Record"
40 : 2 : "Ctrl+Down" : 65 : "Insert Record"
119 : 1 : "Shift+F8" : 66 : "Next Set of Records"
1005 : 0 : "Down" : 67 : "Next Record"
1004 : 0 : "Up" : 68 : "Previous Record"
118 : 0 : "F7" : 69 : "Clear Block"
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
34 : 1 : "Shift+PageDown" : 71 : "Next Block"
33 : 1 : "Shift+PageUp" : 72 : "Previous Block"
116 : 1 : "Shift+F5" : 73 : "Duplicate Field"
119 : 0 : "F8" : 74 : "Clear Form"
122 : 0 : "F11" : 76 : "Enter Query"
122 : 2 : "Ctrl+F11" : 77 : "Execute Query"
69 : 3 : "Shift+Ctrl+E" : 78 : "Display Error"
80 : 2 : "Ctrl+P" : 79 : "Print"
123 : 0 : "F12" : 80 : "Count Query"
85 : 2 : "Ctrl+U" : 81 : "Update Record"
121 : 3 : "Shift+Ctrl+F10" : 82 : "Function 0"
112 : 3 : "Shift+Ctrl+F1" : 83 : "Function 1"
113 : 3 : "Shift+Ctrl+F2" : 84 : "Function 2"
114 : 3 : "Shift+Ctrl+F3" : 85 : "Function 3"
115 : 3 : "Shift+Ctrl+F4" : 86 : "Function 4"
116 : 3 : "Shift+Ctrl+F5" : 87 : "Function 5"
117 : 3 : "Shift+Ctrl+F6" : 88 : "Function 6"
118 : 3 : "Shift+Ctrl+F7" : 89 : "Function 7"
119 : 3 : "Shift+Ctrl+F8" : 90 : "Function 8"
120 : 3 : "Shift+Ctrl+F9" : 91 : "Function 9"
113 : 0 : "F2" : 95 : "List Tab Pages"
72 : 2 : "Ctrl+H" : 30 : "Help"
------------------------------------end of file-----------------------------------------
Now if this is the file i have How can i make F7,F8,F10 disabled for security?
can u clarify to me how can handle this,i am afraid i may do something wrong..!!!
But how do you want to commit without the shortcut?? What do u mean by a shortcut..?
Thanks in advance..
Regards,
Abdetu.

JVC GY-HM100u for live streaming

I want to buy the JVC GY-HM100u for live streaming at my local church. We want to be able to have the camera at the front of the church and have the laptop that we are using somewhere else.
Is this possible and if so how?
Also what laptop would you recommend for this type of task
(Live streaming a Church service and editing the recording later on)

First question I have is why do you want the camera at the front?
Second question is are you using the laptop for the web broadcast or recording?
Third question - what hardware are you going to use to get from the camera and into your computer, and what software to get it from the computer to the web?
My advice is stream in SD and run a composite video line from the camera to some sort of hardware that'll get it into your computer to stream out. What hardware you need depends on the software you use to stream. It's church - save a few bucks going SD, then donate what you save to a local charity. If you do anamorphic (widescreen) SD you'll probably convince half of your web viewers that it's HD. Check with your streaming provider about what needs to be done with anamorphic video. Don't forget to think about what kind of upstream data connection you need. Check with your provider to see what kind of sustained upload speeds you need. Do tests during the service to see what's available. If you have public WiFi sharing the internet connection you might run into issues sometime.
For your recording later on, just record to the camera's SD card slots. The JVC you mentioned records Quicktime movies that'll go right into Final Cut. This can easily be HD.
Make sure your audio is clean, it matters more than the picture. Get a feed from one of the audio consoles. If it's the front of house board (or the board if you only have one) ask for a Matrix, post-fade AUX, or Tape Out from the sound guy - though he will have an understanding of what you need already. You might look into some sort of auto-gain controller or compressor to level things off. You can have 12dB of difference between someone talking and a band play easily.
For the laptop - again it depends on your streaming provider. A desktop may be a better option for specialised hardware requirements.
I'm going to hop on a soap box here at the end for a second. I don't mean this offensively to your local church. I have no idea what sorts of programs you have in place or anything of the sort. That said, for a church I'd sit down and do a cost-benefit analysis on this before continuing. Sure, a live stream is cool, but given the cost that it takes to get it going I'd rather buy school supplies and hygiene items for kids that need them, or put some money into social justice. Chances are a live stream isn't going to change someone's life, but providing a village with clean water changes several lives. You could probably step away from the live idea, drop down to SD, and save about $4,000 initially, plus whatever ongoing costs web streaming necessitates. A lot can be done with $4,000.

[svn:osmf:] 14823: Fix bug where canPause was not set to false for live streams.

Revision: 14823
Revision: 14823
Author:   [email protected]
Date:     2010-03-17 10:51:40 -0700 (Wed, 17 Mar 2010)
Log Message:
Fix bug where canPause was not set to false for live streams.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/NetStreamPlayTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/TestVideoElement.as

Thanks for looking at this post. We have resolved the issue for ourselves by working with our DBAs to narrow down where the problem actually started. We found that the particular SQL we were looking at was not the issue. In a chart on a subsequent page (via a click through), we were actually running into where apex was starting to consuming memory but we were catching it later.
What we found was that when we had a chart query that was SQL containing a pipeline function, the memory usage went up. And within 10 minutes, the server would crawl to a halt. To release the memory, the DBAs would have to bounce the Apex instance. When I changed the query to be a function returning SQL, the problem stopped. I don't know what the correlation was between SQL and moving to a PL/SQL function returning SQL.
I am not even 100% positive of the pipeline function being the cause. I only know that this started happening about the same time as when I implemented the pipeline function. I understand you are leery of a one-second function/query running up that kind of utilization. No one here believed me either (including me really). We figured it HAD to be a coincidence. But once I changed the query from SQL to a function returning PL/SQL, our problem went away.
Thanks to all who looked at and thought about this.
Walter

Using Broadcaster with Internap CDN for live streaming

Has anybody successfully used Broadcaster with Internap's CDN for live streaming?
If so how are you configuring broadcaster?

What are your current settings in FMLE ?
What is your input feed? from webcam? external HD camera? Encoder card?
If your connectivity approved you can raise up the bitrate and set higher output size.
N.

Need license for using H.264 Video codec for live stream with FMS 3.5 series

Hi,
I am creating a live audio-Video chat application in which I use H264 video codec for live streaming. I am using Flash Media Server version 3.5.7. I read some where that H.264 Video streaming using FMS required seperate licencse. So I want to confirm , It is true that H264 video streaming required seperate license? If yes then what is the procedure to get license.
Please let me know its urgent.
Regrads,

Hi Again,
Thanks for your reply.
Here are some articles/posts which says about Royalties to use h264:
http://www.mpegla.com/Lists/MPEG%20LA%20News%20List/Attachments/226/n-10-02-02.pdf 15:27
http://www.mpegla.com/main/programs/AVC/Documents/AVC_TermsSummary.pdf
http://www.streamingmedia.com/Articles/ReadArticle.aspx?ArticleID=65403&PageNum=3
http://www.mpegla.com/main/programs/avc/Documents/AVC_TermsSummary.pdf
According to these, any product/service provider, need to pay one time fee based on # of subscribers if we are using h264 for encoding and is charging fee from its users.
About our business: We are web-conferencing solution tool provider and are using Flash Media Server version 3.5.7. I for audio/video. Please help me out if h264 is really free for us or we need to buy license to use that.
Looking forward to hear from you soon.
Regards,

Flash Media Player which handles bitrate switching for live streams?

Hello. I've got a very short timescale to find a solution for a way to display livestreams with bitrate switching. Does anyone
know of any opensource players which can do this effectively? Or do the inbuilt components in CS4 deal with this ok?

Thanks,I have read that article. Based on that article the NetStreamInfo.maxBytesPerSecond is not an accurate measurement to base dynamic switching on. This seems to be the basis of the bitrate switching in both the longtail player, and the adobe examples that I have tried. That article suggests using the dropped frames property, in conjunciton with bufferlength to determine if switching is neccessary. Unfortunately I can't seem to find a player online which handles this successfully. That being said, I can't believe I'm the only person trying to implement dynamic bitrate switching for live streams so surely there are some players out there which can do this successfully? If anyone knows of any code available which does this successfully I would appreciate knowing where! The examples provided by Adobe https://www.adobe.com/cfusion/entitlement/index.cfm?e=fms35 unfortunately don't work either.

How can I make a countdown timer using After Effects

I'd like to make a video that has a timer that counts down one second at a time. I need one starting at 5:00 (five minutes). Is there a way to easily do this in After Effects without having to manually change the text every second?
Thanks.

I'm glad that you found a solution, but I thought that you might appreciate a suggestion of another approach.
Colin Braley provides a tutorial and example project on
his website that show how to use an expression on the Source Text property to animate text to overcome some of the limitations of the Numbers effect.
There's a similar example in the
"Example: Animate text as a timecode display" section of After Effects Help.
Here are some Community Help searches that can lead you to some ideas, too:
Community Help search for 'countdown timer'
Community Help search for 'digital countdown timer'

How to set a specific time zone for time channel in DIADEM

Hi,
I'd like to know how to autmatically set a specific time zone for time channels in DIADEM.
For example, I have stored data with corresponding time channel in UTC time on a disk which was collected in another time zone. Now I want to analyze this data and I want the time channel to show the local time in the time zone where the data was collected, and not the time in the local time zone where the computer is located.
The time channel should also take site local summer/winter time into account. Now I'm running a script that handles it for me which adds or subtract hours according to my input. The problem is that I'm handling data from several different time zones and I'm not located in any of them and when you're running a lot of data over a greater time period, it's easy to make mistakes, especially when it comes to summer/winter time. Is there a any clever solution to this already implemented in Diadem that I have not found?

Hi hj77,
No, I'm sorry, DIAdem has no time zone functionality at all. I'm afraid you have no choice in DIAdem but to keep running your scripts. Summer and Winter time are truly tricky, because the rules for when the changes occur are different in different countries and states within countries and also can change from year to year within the SAME country (as they did in the US a few years ago).
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to make a Countdown timer Script for Live Streaming

Similar Messages

Maybe you are looking for