How to make a custom infotype field the time constraint 1?????

Hello everyone I have this challenging question for gurus to answer it.
In custom created infotype for OM Ii have that field called ZZJOBID. When infotype was created I assigned the time constraint 1 for that infotype. That time constraint was base on OBJID not on ZZJOBID. Now the problem I am encountering is when I assign the 2nd ZZJOBID with time span 01011800-12319999 it overwrite the 1st assign ZZJOBID.
for the requirement reason I have to use PO10( not po03). If I change the time constraint to 3 which let me have the multiple records but I am losing the delimit and other functionality which comes with time constraint 1.

Suresh,
you are wright when you say that ' Time Constraint is for the Infotype/Subtype record and cannot be based off a field.' The OM infotype runs on bases of Object such as Organizational Unit, Job, etc... The point I was trying to draw is I am looking for a way that allow me to work via TC PO10 which run on Organizational Unit along with different ZZJOBID (with same begda and endda, if needed).

Similar Messages

Calling a custom Infotype field in Time Management PCR

Dear All,
I need to read a custom Infotype field in TM PCR to read the individual leave entitlement. In my organization there is no employee group wise or Personnel Area wise fixed entitlements for leave. Leave entitlement varies individual to individual based on the contract. We are planning to maintain the individual annual entitlement in a custom infotype n then call this information in PCR to accrue the prorated quota each month.
Is there any standard operation available which can be used to read a custom infotype field or do we need to create a custom operation or function. If so, kindly let me know how to create them.
Appreciate your early response.
Thanks & Regards
Syed

Syed,
I am not really sure about it. What I can tell you is that there is standar operation TABLE that is use to read fields from infotype. You may use that operation as a base or maybe just create some enhancement on it (I really don´t if that is possible). Check with your ABAP and have a look on operation table.
Regards,
Edoardo

How to make a custom object function the same as the Competitor and Partner

Would like to use a custom object to function the same way the Competitor and Partner objects work in CRM. I have not be able to accomplish this. Do you know if it is possible? Can the specialized functionality of the account relationships fields and layouts be leverage with a custom object?

Hi Peter. Thanks for the reply.
I assumed that if I used the project style sheet during the export, Word would convert the style so that it looked the same as in the HTML. Is that a bad assumption? I'm currently not mapping to any template equivalent for these message box styles. I did try it as one of my attempts, but I couldn't figure it out. It never seemed to take the style in the .dot.
Anyway, if I use just 1 style, such as just the MsgBox, I obviously don't get the white paragraph between the title and message. That white paragraph comes from the first <p> tag in the MsgBox style. But I need to have the <p> tags in there because they're better for our localization process than line breaks.
I did do some tweaks that made it look better. Basically I structured it so that the MsgBoxTitle div is now inside the MsgBox div. Something like this:
<div class="MsgBox">
    <div class="MsgBoxTitle">PC-DMIS MESSAGE: </div>
    <p>Please do the following steps in the indicated order.</p>
    <p>1. Remove the current SH-1/2/3 stylus.</p>
    <p>2. Attach the SHSP (Stylus Holder Setting Piece).</p>
    <p>3. Jog the probe to a safe location with a clear line of approach
     to the port(s) being calibrated.</p>
    <p>4. Then click OK.</p>
    <p>After you click OK the machine will begin DCC measurement.</p>
</div>
And then I adjusted my styles borders, padding, and thickness. That helped it look more connected, but still doesn't look quite right:
Would love to get rid of that white space after the title.
If you have time, I would be interested in a more detailed example of how you did it.

How to make a custom folder on the dock open (not in the finder)

I want to be able to add a folder to the dock and open it like the 3 preset folders open in the little window, not in a finder window. Any ideas?

yeah sorry i was trying to make a smart folder into a stack but after further research i found that its not possible.
starting to feel like the only upgrades that Lion brings are the new gestures and mission control since i keep seeing beachballs like never before.

How to make Buyer and Planner fields in Master Items Form Required without

How to make Buyer and Planner fields in Master Items Form Required without using personalization?
1) Steps to Reproduce
Under Application Developer Common Modules responsibility,
1) Query Region MTL_SYSTEM_ITEMS
2) Click on Region Items
3) Add Buyer Id and Planner Code attributes with Required checkbox checked.
4) Bounce iAS server and JVM and clear java cache
5) Changes not taking effect
Current Application Release: 11.5.10.2 (3460000)
Current INV Rollup: INV.J RUP22 (9878808)
Current WMS Rollup: WMS RUP19 (9951502)
Product Installation List :
Product Installation: 11i.BOM.J: Installed
Product Installation: 11i.EGO.E: Installed
Product Installation: 11i.ENG.I: Installed
Product Installation: 11i.INV.J: Installed
Product Installation: 11i.PO.I: Installed
Product Installation: 11i.WMS.G: Installed
client needs to make the Buyer and Planner fields under Inventory->master Items form to be required.
He tried using the Application Developer Common Modules responsibility, to find the Master Items Region and added the Buyer Id and Planner Code attributes with the Required check-box set to Yes. He bounced the iAS server and cleared java cache, but the changes do not take effect.
client does not want to use form personalization.
Can you please provide more assistance for using Application Developer Common Modules responsibility?
Edited by: jemar98 on Aug 9, 2011 1:44 PM

A forms developer could make those fields required with a CUSTOM.pll extension if you didn't want to use forms personalization. Both are considered customizations to standard functionality and may or may not require rework after patching or upgrades.

How to make every break column on the top of the rows in the same subgroup

hi, guys:
I was wondering if anyone could help me on this problem: I need to set up a break column on a classic report (I ma required to use classic report only), and it works, but I do not know how to make every break column on the top of the rows in the same subgroup. The break column only stays on the left to the rest columns as it is the first column. Anyone could help me on this problem? Here is the query:
select so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
(select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
(select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
(select sof.name||'   '||sof.phone1||'   '||sof.link from sor_offices sof where sof.office_id=sl.jurisdiction) as "Jurisidiction",
decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
floor(to_number(sysdate-so.date_of_birth)/365) as "Age"
from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv
where rox.offender_id=so.offender_id
and sllv.offender_id(+)=so.offender_id
and sl.location_id(+)=sllv.location_id
and rox.status not in ('Merged')
and rox.reg_type_id=1
and upper(rox.status)='ACTIVE'
and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
and ((so.first_name is not null and upper(so.first_name) like '%'||upper(:P5_TF_FIRST_NAME)||'%') or (:P5_TF_FIRST_NAME is null))
and ((so.last_name is not null and upper(so.last_name) like '%'||upper(:P5_TF_LAST_NAME)||'%') or (:P5_TF_LAST_NAME is null))
and ((sl.address1||sl.address2 is not null and upper(sl.address1|| sl.address2) like '%'||upper(:P5_TF_ADDRESS)||'%')or (:P5_TF_ADDRESS is null))
and ((sl.city is not null and upper(sl.city) like '%'||upper(:P5_TF_CITY)||'%')or (:P5_TF_CITY is null))
and ((sl.county is not null and sl.county =:P5_SL_COUNTY)or (:P5_SL_COUNTY is null))
and (((select sc5.description from sor_code sc5 where sc5.code_id=sl.state and sc5.description=:P5_SL_STATE) is not null )or (:P5_SL_STATE is null))
and ((sl.zip is not null and sl.zip =:P5_TF_ZIP_CODE)
or (:P5_TF_ZIP_CODE is null))
union
select so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
(select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
(select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
(select sof.name||'   '||sof.phone1||'   '||sof.link from sor_offices sof where sof.office_id=sl.jurisdiction) as "Jurisidiction",
decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
floor(to_number(sysdate-so.date_of_birth)/365) as "Age"
from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv
where rox.offender_id=so.offender_id
and sllv.offender_id(+)=so.offender_id
and sl.location_id(+)=sllv.location_id
and rox.status not in ('Merged')
and rox.reg_type_id=1
and upper(rox.status)='ACTIVE'
and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
and ((so.first_name is not null and upper(so.first_name) like '%'||upper(:P5_TF_FIRST_NAME)||'%') or (:P5_TF_FIRST_NAME is null))
and ((so.last_name is not null and upper(so.last_name) like '%'||upper(:P5_TF_LAST_NAME)||'%') or (:P5_TF_LAST_NAME is null))
and ((sl.physical_address1 is not null and upper(sl.physical_address1) like '%'||upper(:P5_TF_ADDRESS)||'%') or (:P5_TF_ADDRESS is null))
and ((sl.physical_city is not null and upper(sl.physical_city) like '%'||upper(:P5_TF_CITY)||'%') or (:P5_TF_CITY is null))
and ((sl.physical_county is not null and sl.physical_county =:P5_SL_COUNTY) or (:P5_SL_COUNTY is null))
and (((select sc5.description from sor_code sc5 where sc5.code_id=sl.physical_state and sc5.description=:P5_SL_STATE) is not null )or (:P5_SL_STATE is null))
and ((sl.physical_zip is not null and sl.physical_zip =:P5_TF_ZIP_CODE) or (:P5_TF_ZIP_CODE is null))
union
select so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
(select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
(select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
(select sof.name||'   '||sof.phone1||'   '||sof.link from sor_offices sof where sof.office_id=sl.jurisdiction) as "Jurisidiction",
decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
floor(to_number(sysdate-so.date_of_birth)/365) as "Age"
from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv, sor_alias sa
where rox.offender_id=so.offender_id
and sa.offender_id=so.offender_id
and sllv.offender_id(+)=so.offender_id
and sl.location_id(+)=sllv.location_id
and rox.status not in ('Merged')
and rox.reg_type_id=1
and upper(rox.status)='ACTIVE'
and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
and ((sa.first_name is not null and upper(sa.first_name) like '%'||upper(:P5_TF_FIRST_NAME)||'%') or (:P5_TF_FIRST_NAME is null))
and ((sa.last_name is not null and upper(sa.last_name) like '%'||upper(:P5_TF_LAST_NAME)||'%') or (:P5_TF_LAST_NAME is null))
and ((sl.address1||sl.address2 is not null and upper(sl.address1|| sl.address2) like '%'||upper(:P5_TF_ADDRESS)||'%')or (:P5_TF_ADDRESS is null))
and ((sl.city is not null and upper(sl.city) like '%'||upper(:P5_TF_CITY)||'%')or (:P5_TF_CITY is null))
and ((sl.county is not null and sl.county =:P5_SL_COUNTY)or (:P5_SL_COUNTY is null))
and (((select sc5.description from sor_code sc5 where sc5.code_id=sl.state and sc5.description=:P5_SL_STATE) is not null )or (:P5_SL_STATE is null))
and ((sl.zip is not null and sl.zip =:P5_TF_ZIP_CODE)or (:P5_TF_ZIP_CODE is null))
union
select so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
(select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
(select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
(select sof.name||'   '||sof.phone1||'   '||sof.link from sor_offices sof where sof.office_id=sl.jurisdiction) as "Jurisidiction",
decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
floor(to_number(sysdate-so.date_of_birth)/365) as "Age"
from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv, sor_alias sa
where rox.offender_id=so.offender_id
and sa.offender_id=so.offender_id
and sllv.offender_id(+)=so.offender_id
and sl.location_id(+)=sllv.location_id
and rox.status not in ('Merged')
and rox.reg_type_id=1
and upper(rox.status)='ACTIVE'
and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
and ((sa.first_name is not null and upper(sa.first_name) like '%'||upper(:P5_TF_FIRST_NAME)||'%') or (:P5_TF_FIRST_NAME is null))
and ((sa.last_name is not null and upper(sa.last_name) like '%'||upper(:P5_TF_LAST_NAME)||'%') or (:P5_TF_LAST_NAME is null))
and ((sl.physical_address1 is not null and upper(sl.physical_address1) like '%'||upper(:P5_TF_ADDRESS)||'%') or (:P5_TF_ADDRESS is null))
and ((sl.physical_city is not null and upper(sl.physical_city) like '%'||upper(:P5_TF_CITY)||'%') or (:P5_TF_CITY is null))
and ((sl.physical_county is not null and sl.physical_county =:P5_SL_COUNTY) or (:P5_SL_COUNTY is null))
and (((select sc5.description from sor_code sc5 where sc5.code_id=sl.physical_state and sc5.description=:P5_SL_STATE) is not null )or (:P5_SL_STATE is null))
and ((sl.physical_zip is not null and sl.physical_zip =:P5_TF_ZIP_CODE) or (:P5_TF_ZIP_CODE is null))I set up "Jurisdiction" to be displayed as the first column in report attributes and set up the first column to be break column, under the "When displaying a break column use this format, use #COLUMN_VALUE# subs", I fill in "Jurisdiction".

lxiscas wrote:
Hi, fac586:
I am sorry for not being able to provide project online oracle to ask the question as some of the data needs to be approved to release.You don't need to use the actual data. Create simple test cases using data from Oracle's sample schemas: SCOTT, OE, HR etc.
I actually want something like this:
Jurisdiction: Bartlesville Police Department, 918-338-4001, http://www.cityofbartlesville.org/departments/police/
Smith , Carl Sherman      ......
Smith , Tommy Nesby .....
Jurisdiction: Canadian County Sheriff's Office, 405-262-4787, Fax - 405-422-2430
Smith , Gabriel Ray      ...
Smith , Michael Bert   ...I omit the sensitive data with ...
but right now it shows as this way:
Jurisdiction: Bartlesville Police Department, 918-338-4001, http://www.cityofbartlesville.org/departments/police/ Smith , Carl Sherman      ......
Smith , Tommy Nesby .....
Jurisdiction: Canadian County Sheriff's Office, 405-262-4787, Fax - 405-422-2430   Smith , Gabriel Ray      ...
Smith , Michael Bert   ...Is that possible to show the data as the upper way?The best way to do this is using a report with a custom named column template as in this example. See the following threads for solutions to similar problems:
<li>{thread:id=2402836}
<li>{message:id=9816577}

Displaying Custom Infotype in the Overview Section of LSO_PV10 and LSO_PV1A

Dear experts,
We would like to display the custom IT in the Overview Section of Create Course Run (LSO_PV10) and Change Course Run (LSO_PV1A) screen. User currently can create and edit some standard ITs from this overview section.
Currently, the custom IT has been built and configured to Object Course (E). It can be displayed from PP01 when choosing Object E.
How can we display the custom infotype to the standard Create Course Run (LSO_PV10) / Change Course Run screen (LSO_PV1A) Overview area?
Many Thanks!
Regards,
Ripin

Hai,
I also faced your problem. I created business event. but when i am checking the business event, but results nil. But system is showing no. for that it is not showing object and relation.
For that i create again object and realationships for that event. Automatically, system overlap that event.
it it is helpful or not, i don't know. If it is helpful , do like that way.
Thanks

How to make a custom table?

Ok, so an assignment is due today. I am up to the last part and what you need to do it make a custom graph, I have an iMac (OS X Yosemite) and I need to make a table like the one showed on the image I attached. If you look on the right hand side of the image, you see a row that says "Size" with three custom made columns which says: "Width", "Thickness and "Length". Please tell me, how I can make a custom table like the one below? Thanks.

Select a group of cells, right-click on them and choose Merge Cells from the pop-up menu:
Description, Material and Qty are two cells selected down and merged, Size is three cells selected across and merged.
Hope this helps.

How to make a custom TableModel for ResultSet

Hi,
I am doing my University Team Project using Java and MySQL what would be the best way to implement a custom TableModel for a JTable that shows the data from the MySQL database.
I've googled it for a couple of hours but all I can really find is examples of how to add static data into the jTable.
The updating of the database through Java works fine, but I would like to show the results in a JTable.
I need help on how to implement a TableModel that uses a ResultSet to populate a JTable.
Any examples of how to make a custom TableModel or links to something that shos me how to do it would be great.
Thanks
Shazan Miah

I've googled it for a couple of hours but all I can really find is examples of how to add static data into the jTable.Then you need more googling practice on picking the appropriate keywords to narrow down a search. Words like "jtable resultset" yielded many hits. Of course I'm partial to the one I suggested that was found in the Swing forum.

How to make a list item field with DATE data type?

I have a column with DATE data type. Using forms 6i I want to generate a poplist list item field with this column while the value of the elements in the list to will be day names like SATURDAY,SUNDAY,MONDAY. if we change the data type from date to char, it will work properly but now with DATE data type behind it, it gives the following error message
"FRM-32082: Invalid value for given item type.
List WEEKREST
Item: WEEKREST
Block: EMPRESTS
Form: MODULE3
FRM-30085: Unable to adjust form for output."
Using forms 6i how to make a list item field with DATE data type which can hold day names?

Set your date column as a hidden (non-displayed) field. Create your list item with the varchar2 day names. Create the list item as a non-base-table field that accepts the text values of day names. On that field, create a when-validate-item trigger that translates the text into a real date, which it then uses to set the value of the actual base-table item.

How to make a custom cursor

How do you make a custom Cursor with the Cursor class, so that I can use it in my program.
And also, how do you make a LookAndFeel??

To make a cursor use:
createCustomCursor public Cursor createCustomCursor(Image cursor,
                                 Point hotSpot,
                                 String name)
                          throws IndexOutOfBoundsException, HeadlessException
Creates a new custom cursor object. If the image to display is invalid, the cursor will be hidden
(made completely transparent), and the hotspot will be set to (0, 0). Parameters:hotSpot - the X
and Y of the large cursor's hot spot. The hotSpot values must be less than the Dimension returned
by getBestCursorSize().name - a localized description of the cursor, for Java Accessibility use.
Throws: IndexOutOfBoundsException - if the hotSpot values are outside the bounds of the cursor.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

How to make a photo STAY in the assets panel for future use for In browser editing?

How to make a photo STAY in the assets panel for future use for In browser editing?
When I delete a photo from a page, it does not stay in the assets panel. My client uses in browser editing daily. Once a week he changes a photo just for a day, then needs the previous photo to replace it. The original photo is not in the asset panel (or folder) for him to choose.
When you upload a photo, it has an arrow in the asset panel. How do you use this as an asset?

Sure ... right mouse click on your page and choose 'Exclude Page from Menus' :-)

MOVED: how to make a good flow in the case?

This topic has been moved to Off Topic Technical.
how to make a good flow in the case?

Browser variation is something we must all deal with. For best results, begin projects with a clear idea of what type of layout you need (1-column, 2-column, 3-column or Multi-column grid). Then get a CSS Layout that meets your requirements.
PVII CSS Templates are rock solid & thoroughly tested to perform well in all browsers (commercial product)
http://www.projectseven.com/products/index.htm
CSS Layout Magic (commercial extension for Dreamweaver)
http://www.projectseven.com/products/templates/pagepacks/cssmagic/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to make a hard copy of the OS mountain lion that i downloaded

How to make a hard copy of the file ofthe OS mountain lion downloaded from apple

Follow the directions in this link to make a Mt. Lion USB thumb drive:
http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
Ciao.

How to make a custom infotype field the time constraint 1?????

Similar Messages

Maybe you are looking for