How to make a proactive view of the Logical Disk Free Space

Hello,
I was wondering how I could make a view (preferably within a dashboard) that monitors the state of the Logical Disk Free Space values for one or more predefined groups. I can only get this to work with line diagrams but that is pretty hard to read.
I would like to make views like:
1) A simple state view that shows the state of the servers (or disks) in three state form (1. Healthy: 80% or lower; 2. Warning: Between 80% and 90%; 3. Alert: 90% or higher).
2) A view of actual percentages of the disk drives in a table form rather than the usual line diagram.
I prefer the first one the most and seems to be the easiest aswell but I can't seem to get this to work.
I hope that this is possible any like to know how to achieve this.
Thanks in advance,
Bram

Hi Bram,
I think you need to create a new dashboard view for this.
Make a new management pack for this.
Once you create a new management pack.
Go to monitoring TAB
Locate the management pack there and right click and select new Dashboard.
Create a summary view dashboard and then once it is created on the right hand side you will see something like
Performance (Which i edited as LDS report for last 24 hrs as per the screenshot)
Above that you will have a configure option. Click on it and mention the Object, counter and instance and of the LDS performance counter and mention the report duration (Last 1hr or  24 hrs )once you do this dashboard will start collecting the report
for you.
Once you scroll down the report you will get the list of servers in which space is low and how old is that alert
Below is the screenshot for your reference.
Gautam.75801

Similar Messages

  • How to enable Logical Disk Free Space

    Hi 
    I have installed SCOM 2012R2 and configured monitoring for Windows 2012 R2 HyperV cluster. i think i configured most of the part but i could not able to see my logical disk free space.
    I treid to enable In Monitors --> Windows Server 2012 Logical Disk --> "Logical Disk Free Space" but its grayed out. 
    can anyone tell me how to monitor my Logical Disk Free space and Physical Disk Free Space.
    Here i attached the screenshot of my SCOM - Montiors
    Regards
    Kris
    Kris

    Thanks Gautam,
    even i go through one by Monitors, i don't see any option to enable monitor. looks like its grayed out.
    Regards
    Kris
    Kris

  • How to make a *full* backup (including the hidden partition), free solution prefered =) [T400]

    Hi,
    I'm planning on messing with my system a little (re-partition, install linux) and I want a full-proof recovery plan. This should work in case I *completely* mess up my HD (bad boot records, destroyed partitions, etc.)
    I have an external hard drive with plenty of free space. How would I make a completely backup; something that would restore everything (including the hidden partition) to its current state?
    Is there any way to do this using free/opensource?
    Keep in mind that if there's a linux app that can do this, I can just boot up using a live CD and run the app from there.
    Thanks in advance.

    Vista or XP? What is/was the partition layout? IIRC, w/XP the 2nd partition is the service partition (hd0,1) and with Vista it is the first (hd0,0).  I don't know if that is always the case, so how is your drive layed out?
    ISTR that with XP the service partition is "hidded' by using an ID of 12 (or something) even though it is a FAT32 partition.  Grub might be unhappy with the ID.  Changing it to "C" might let it boot. That's just a WAG.  My recollection is that the ID only affected where I could install the grub files, not what I could boot.
    I've got some old notes here somewhere:  www.beezmo.com/ThinkPadT61.htm maybe in "partitioning" or Windows XP.
       **** grrr.  the insert link thingy isn't working.  the link above is literally correct, but the forum is inserting some invisible characters ****
    I don't know clonezillla.  Will it let you restore only one of the partitions?  If so, do a restore to factory (with the recovery media you made immediately on receiving the laptop) and then restore only the Vista or XP partition from clonezilla.
    HTH,
    Z.
    Message Edited by zoltanthegypsy on 01-07-2009 06:47 AM
    Message Edited by zoltanthegypsy on 01-07-2009 06:48 AM
    Message Edited by zoltanthegypsy on 01-07-2009 06:50 AM
    Message Edited by zoltanthegypsy on 01-07-2009 06:53 AM
    Message Edited by zoltanthegypsy on 01-07-2009 08:00 AM
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • How to mak Firefox Cache Viewer ?

    how to make Firefox Cache Viewer  in vb.net ?

    Hi,
    Since this question is more related to this 3rd-party product(Need to use API), you'd better to ask question at its official website for better support.
    Thank you for your understanding.
    Best Regards,
    Franklin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
    Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    The Oracle documentation has a good overview of the options available
    Generating XML Data from the Database
    Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
    You can also find some information in XML DB FAQ

  • How to make a photo STAY in the assets panel for future use for In browser editing?

    How to make a photo STAY in the assets panel for future use for In browser editing?
    When I delete a photo from a page, it does not stay in the assets panel. My client uses in browser editing daily. Once a week he changes a photo just for a day, then needs the previous photo to replace it. The original photo is not in the asset panel (or folder) for him to choose.
    When you upload a photo, it has an arrow in the asset panel. How do you use this as an asset?

    Sure ... right mouse click on  your page and choose 'Exclude Page from Menus' :-)

  • MOVED: how to make a good flow in the case?

    This topic has been moved to Off Topic Technical.
    how to make a good flow in the case?

    Browser variation is something we must all deal with.  For best results, begin projects with a clear idea of what type of layout you need (1-column, 2-column, 3-column or Multi-column grid).  Then get a CSS Layout that meets your requirements.
    PVII CSS Templates are rock solid & thoroughly tested to perform well in all browsers (commercial product)
    http://www.projectseven.com/products/index.htm
    CSS Layout Magic (commercial extension for Dreamweaver)
    http://www.projectseven.com/products/templates/pagepacks/cssmagic/index.htm
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • How to make a hard copy of the OS mountain lion that i downloaded

    How to make a hard copy of the file ofthe OS mountain lion downloaded from apple

    Follow the directions in this link to make a Mt. Lion USB thumb drive:
    http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
    Ciao.

  • How to make every break column on the top of the rows in the same subgroup

    hi, guys:
    I was wondering if anyone could help me on this problem: I need to set up a break column on a classic report (I ma required to use classic report only), and it works, but I do not know how to make every break column on the top of the rows in the same subgroup. The break column only stays on the left to the rest columns as it is the first column. Anyone could help me on this problem? Here is the query:
    select so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
    (select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
    (select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
    replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
    (select sof.name||'   '||sof.phone1||'   '||sof.link from sor_offices sof where sof.office_id=sl.jurisdiction) as "Jurisidiction",
    decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
    decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
    floor(to_number(sysdate-so.date_of_birth)/365) as "Age"
    from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv
    where rox.offender_id=so.offender_id
    and sllv.offender_id(+)=so.offender_id
    and sl.location_id(+)=sllv.location_id
    and rox.status not in ('Merged')
    and rox.reg_type_id=1
    and upper(rox.status)='ACTIVE'
    and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
    and ((so.first_name is not null and upper(so.first_name) like '%'||upper(:P5_TF_FIRST_NAME)||'%') or (:P5_TF_FIRST_NAME is null))
    and ((so.last_name is not null and upper(so.last_name) like '%'||upper(:P5_TF_LAST_NAME)||'%') or (:P5_TF_LAST_NAME is null))
    and ((sl.address1||sl.address2 is not null and upper(sl.address1|| sl.address2) like '%'||upper(:P5_TF_ADDRESS)||'%')or (:P5_TF_ADDRESS is null))
    and ((sl.city is not null and upper(sl.city) like '%'||upper(:P5_TF_CITY)||'%')or (:P5_TF_CITY is null))
    and ((sl.county is not null and sl.county =:P5_SL_COUNTY)or (:P5_SL_COUNTY is null))
    and (((select sc5.description from sor_code sc5 where sc5.code_id=sl.state and sc5.description=:P5_SL_STATE) is not null )or (:P5_SL_STATE is null))
    and ((sl.zip is not null and sl.zip =:P5_TF_ZIP_CODE)
    or (:P5_TF_ZIP_CODE is null))
    union
    select so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
    (select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
    (select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
    replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
    (select sof.name||'   '||sof.phone1||'   '||sof.link from sor_offices sof where sof.office_id=sl.jurisdiction) as "Jurisidiction",
    decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
    decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
    floor(to_number(sysdate-so.date_of_birth)/365) as "Age"
    from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv
    where rox.offender_id=so.offender_id
    and sllv.offender_id(+)=so.offender_id
    and sl.location_id(+)=sllv.location_id
    and rox.status not in ('Merged')
    and rox.reg_type_id=1
    and upper(rox.status)='ACTIVE'
    and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
    and ((so.first_name is not null and upper(so.first_name) like '%'||upper(:P5_TF_FIRST_NAME)||'%') or (:P5_TF_FIRST_NAME is null))
    and ((so.last_name is not null and upper(so.last_name) like '%'||upper(:P5_TF_LAST_NAME)||'%') or (:P5_TF_LAST_NAME is null))
    and ((sl.physical_address1 is not null and upper(sl.physical_address1) like '%'||upper(:P5_TF_ADDRESS)||'%') or (:P5_TF_ADDRESS is null))
    and ((sl.physical_city is not null and upper(sl.physical_city) like '%'||upper(:P5_TF_CITY)||'%') or (:P5_TF_CITY is null))
    and ((sl.physical_county is not null and sl.physical_county =:P5_SL_COUNTY) or (:P5_SL_COUNTY is null))
    and (((select sc5.description from sor_code sc5 where sc5.code_id=sl.physical_state and sc5.description=:P5_SL_STATE) is not null )or (:P5_SL_STATE is null))
    and ((sl.physical_zip is not null and sl.physical_zip =:P5_TF_ZIP_CODE) or (:P5_TF_ZIP_CODE is null))
    union
    select so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
    (select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
    (select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
    replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
    (select sof.name||'   '||sof.phone1||'   '||sof.link from sor_offices sof where sof.office_id=sl.jurisdiction) as "Jurisidiction",
    decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
    decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
    floor(to_number(sysdate-so.date_of_birth)/365) as "Age"
    from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv, sor_alias sa
    where rox.offender_id=so.offender_id
    and sa.offender_id=so.offender_id
    and sllv.offender_id(+)=so.offender_id
    and sl.location_id(+)=sllv.location_id
    and rox.status not in ('Merged')
    and rox.reg_type_id=1
    and upper(rox.status)='ACTIVE'
    and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
    and ((sa.first_name is not null and upper(sa.first_name) like '%'||upper(:P5_TF_FIRST_NAME)||'%') or (:P5_TF_FIRST_NAME is null))
    and ((sa.last_name is not null and upper(sa.last_name) like '%'||upper(:P5_TF_LAST_NAME)||'%') or (:P5_TF_LAST_NAME is null))
    and ((sl.address1||sl.address2 is not null and upper(sl.address1|| sl.address2) like '%'||upper(:P5_TF_ADDRESS)||'%')or (:P5_TF_ADDRESS is null))
    and ((sl.city is not null and upper(sl.city) like '%'||upper(:P5_TF_CITY)||'%')or (:P5_TF_CITY is null))
    and ((sl.county is not null and sl.county =:P5_SL_COUNTY)or (:P5_SL_COUNTY is null))
    and (((select sc5.description from sor_code sc5 where sc5.code_id=sl.state and sc5.description=:P5_SL_STATE) is not null )or (:P5_SL_STATE is null))
    and ((sl.zip is not null and sl.zip =:P5_TF_ZIP_CODE)or (:P5_TF_ZIP_CODE is null))
    union
    select so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
    (select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
    (select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
    replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
    (select sof.name||'   '||sof.phone1||'   '||sof.link from sor_offices sof where sof.office_id=sl.jurisdiction) as "Jurisidiction",
    decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
    decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
    floor(to_number(sysdate-so.date_of_birth)/365) as "Age"
    from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv, sor_alias sa
    where rox.offender_id=so.offender_id
    and sa.offender_id=so.offender_id
    and sllv.offender_id(+)=so.offender_id
    and sl.location_id(+)=sllv.location_id
    and rox.status not in ('Merged')
    and rox.reg_type_id=1
    and upper(rox.status)='ACTIVE'
    and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
    and ((sa.first_name is not null and upper(sa.first_name) like '%'||upper(:P5_TF_FIRST_NAME)||'%') or (:P5_TF_FIRST_NAME is null))
    and ((sa.last_name is not null and upper(sa.last_name) like '%'||upper(:P5_TF_LAST_NAME)||'%') or (:P5_TF_LAST_NAME is null))
    and ((sl.physical_address1 is not null and upper(sl.physical_address1) like '%'||upper(:P5_TF_ADDRESS)||'%') or (:P5_TF_ADDRESS is null))
    and ((sl.physical_city is not null and upper(sl.physical_city) like '%'||upper(:P5_TF_CITY)||'%') or (:P5_TF_CITY is null))
    and ((sl.physical_county is not null and sl.physical_county =:P5_SL_COUNTY) or (:P5_SL_COUNTY is null))
    and (((select sc5.description from sor_code sc5 where sc5.code_id=sl.physical_state and sc5.description=:P5_SL_STATE) is not null )or (:P5_SL_STATE is null))
    and ((sl.physical_zip is not null and sl.physical_zip =:P5_TF_ZIP_CODE) or (:P5_TF_ZIP_CODE is null))I set up "Jurisdiction" to be displayed as the first column in report attributes and set up the first column to be break column, under the "When displaying a break column use this format, use #COLUMN_VALUE# subs", I fill in "Jurisdiction".

    lxiscas wrote:
    Hi, fac586:
    I am sorry for not being able to provide project online oracle to ask the question as some of the data needs to be approved to release.You don't need to use the actual data. Create simple test cases using data from Oracle's sample schemas: SCOTT, OE, HR etc.
    I actually want something like this:
    Jurisdiction: Bartlesville Police Department, 918-338-4001, http://www.cityofbartlesville.org/departments/police/
    Smith , Carl Sherman      ......
    Smith , Tommy Nesby .....
    Jurisdiction: Canadian County Sheriff's Office, 405-262-4787, Fax - 405-422-2430
    Smith , Gabriel Ray      ...
    Smith , Michael Bert   ...I omit the sensitive data with ...
    but right now it shows as this way:
    Jurisdiction: Bartlesville Police Department, 918-338-4001, http://www.cityofbartlesville.org/departments/police/  Smith , Carl Sherman      ......
    Smith , Tommy Nesby .....
    Jurisdiction: Canadian County Sheriff's Office, 405-262-4787, Fax - 405-422-2430   Smith , Gabriel Ray      ...
    Smith , Michael Bert   ...Is that possible to show the data as the upper way?The best way to do this is using a report with a custom named column template as in this example. See the following threads for solutions to similar problems:
    <li>{thread:id=2402836}
    <li>{message:id=9816577}

  • How to make scheduled jobs Fail if the return partial results?

    How to make scheduled jobs Fail if the return partial results?
    Does anyone know if there is a way to do this?
    We have a number of reports that we schedule to various locations in Excel and PDF. We are frequently getting problems which are manifesting themselves as empty data providers and if we run them as Web Intelligence reports it says Partial Results. Re running the reports normally fixes the problem and returns the data correctly but the problem is that the scheduler reports them as successful and the emails or files get distributed (causing our customers to complain!!!).
    Currently using XIr2 +SAP integration Kit migrating to XI 3.1 in July 2009
    Any ideas/suggestion would be appreciated...
    I did find reference to the adapt case ADAPT01122128 which may help but when and if are unkowns so not much help.
    Ta
    Nick

    This may be helpful to some people:
    http://blogs.sun.com/milan/entry/using_web_service_to_send

  • How can I get the amount of free space that is on my drive to show at the bottom of the drive in Lion.

    How can I get the amount of free space that is on my drive to show at the bottom of the drive in Lion.
    This is a must feature for me and I may have to go back to Snow Leopard.
    Please help!

    Right click on your desktop and choose "viewer options". Adjust the spacing and the size of your icons and you should be able to see the size of your drive(s) and the free space available on each drive with the exception of your bootcamp drive which will only show the overall size of the drive you have it on.  This may be different if you only have one system drive (like on a Mac Book Pro) with a partition containing bootcamp on it. this may only show you the overall capacity, I can't say for sure though as I only use a Mac Pro with 4 seperate Hard Drives which are showing both overall capacity and free space available. Hope this helps
    Denisimo

  • How can i reformat my harddrive using the recovery disk stored in partition drive?

    hi guys! i need help. i need to reformat my harddrive and i will do this for the first time. however, i was not ablt to make the recovery disk since i purchased the tx2 1275dx laptop last july 2009. what i have is a recovery disk stored in a partition harddrive. how can i reformat my cpmputer using the recovery disk in partition harddrive? my OS is windows vista.  thank you...  

    Hi,
    Shutdown the notebook.  Tap away at f11 as you start to access Recovery Manager which you can then use to reinstall the Operating System.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT1338 how can make a room from my start up disk in in mac pro

    how can make a room from my start up disk in in mac pro

    Only you can decide what you want to delete to free up space on your PB, Personally I think you'll find 17 GB won't go very far when you start to add video.
    Consider an external drive. Don't forget if you let your free space fall below 10% of the total size of the drive you will risk corrupting your directory structure or causing other damage which may result in a loss of data.

  • I am going to buy a bigger hard drive. i am operating on Lion. how do i install my os on the new disk? i can't use time machine.

    i am going to buy a bigger hard drive. i am operating on Lion. how do i install my os on the new disk? i can't use time machine.

    Plug this new drive as an external drive, boot from lion recovery "command-R" more info here: http://www.apple.com/macosx/recovery/
    Open disk utility, format and partition the disk at your will (allways Mac OS plus...) and go ahead with the install, don't care if it tells you to whait thousands of hours, I did get installed in 2 hours and a half last week.
    If you can't plug the disk as an external one, you'll have first to do an USB disk recovery utility, as easy as download the recovery utility and install it in an USB disk, you can find anything from the link above, plug the disk as a single master, and boot from the USB you created before.
    Tell me how it went!!!

  • To know the amount of free space in a tablespace

    hi,
    I'm learning oracle 9i release 9.2.0.1.0 .I'd created a tablespace 'TOOLS' for being used as the default tablespace for Statspack.
    I wish to know the amount of free space available in this tablespace. For this purpose I ran the following query but there was no rows selected :-
    SQL> select tablespace_name,bytes from dba_free_space
    2 where tablespace_name='TOOLS';
    no rows selected
    SQL> select name from v$tablespace;
    NAME
    CWMLITE
    DRSYS
    EXAMPLE
    INDX
    ODM
    SYSTEM
    TOOLS
    UNDOTBS1
    USERS
    XDB
    TEMP
    Can anyone tell the reason for this.

    I tried your query
    SQL> select TABLESPACE_NAME,
    2 sum(BYTES) Total_free_space,
    3 max(BYTES) largest_free_extent
    4 from dba_free_space
    5 group by TABLESPACE_NAME;
    ♀TABLESPACE_NAME TOTAL_FREE_SPACE LARGEST_FREE_EXTENT
    CWMLITE 11141120 10878976
    DRSYS 10813440 10813440
    EXAMPLE 131072 131072
    INDX 26148864 26148864
    ODM 11206656 11206656
    SYSTEM 3211264 3080192
    UNDOTBS1 199229440 196149248
    USERS 26083328 26083328
    XDB 196608 196608
    9 rows selected.
    Again there were no rows for TOOLS tablespace.

Maybe you are looking for