How to make a t-code to access maintain viewer(SM30)

I want to make a t-code ZOB52 like OB52 can maintain V_T001B?But in PRD system ,it can not work,who can tell me how to make ZOB52 like OB52.

Hi
copy the program of OB52 into a new program and use transacction Zob52 and assign it to the new program that you have copied .
In the new program , you can use the authorization that you want.
in my case ,
I have done it with a new program with the selection screen parameters of ob52 and used BDC for updating OB52 . I have also put the authorization for users who can use this ZOB52.
regards,
Ramya

Similar Messages

How to make the same code that works only?

how to make the same code that works only?
code:
Form2.Close = Me.Enabled = true
effect such as this code

I have this code:
Public Class Form1
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
Form2.Show()
Me.Enabled = False
End Sub
Private Sub Button5_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button5.Click
Form3.Show()
Me.Enabled = False
End Sub
End Class
he wants to after closing Form2 and Form3 unblocked the whole form1
it means that:
when I click the button, displays the himself form2 and blocks himself form1" and after closing Form2 , unlocks himself Form1"
the same with Form3

How to make a field Mandatory in a Table view?

How to make a field Mandatory in a Table view?
The requirement is, the user should not be able to append a new Row, unless and untill he enteres the data in the column SOLD-TO. Now how do i acheive making this field madatory. Normally in Edit form view, we can go in customizing and flag Mandatory, for table view we don't have this option.
Please can anyone of you guide me in this approach?
Jagadish.G

Hi Jagadish,
have a look in this thread, part of the code you can use in eh_insert method or logic to write enable/disable insert button.
Re: Assignment Block Mandatory
regards
Ismail
Edited by: Ismail Shaik on Oct 21, 2009 11:36 AM

How to create a Z* table which can maintain through SM30?

How to create a Z* table which can maintain through SM30? Thanks!

This question had been asked millions of times...you just need to search the forums...
Quick hint...goto SE11...the utilities menu and then Table Maintenance Generator.
Greetings,
Blag.

How to make a T-code to be displayed after starting SAP

Hi all, plz let me know how to make our own t-code to be displayed after starting SAP screen.

Hi,
It is shown at the bottom right corner of your screen.
Regards,
Atish

How to make the list code visible?

Dear All Experts,
     How to make the list with A1 and so on visible?
     Pls refer to below screenshot:
Thanks!

Dear All,
     I already find it.
Thanks!

How to make the Sourcelist checkbox in Material MasterPurch view- Mandatory

Hi All,
Can anyone please let me know how to make the Source list checkbox mandatory in Material Master.
Ie for example if i am creating and ERSA Material, i want to make the source list option mandatory by default whenever i create an ERSA Material. I know the option to make the Source List mandatory at Plant Level.
But i want to make source list mandatory at material. By default..it has to appear mandatory on the Material. I want to do this
specially based on Material Type. Ie i want this to be mandatory only for specific material types i chose.
Please suggest me the possible ways.
Thanks
Sridevi

Hi, Get Source List Field sel. group from OMSR which is 16 by default change it to new field say 210, then goto OMS9 enter Field sel. group 210, Check for field 'MARC-KORDB' & change it to mandatory for Field reference ERSA, if you cannot find there you need to create new field reference & assign it to ERSA in OMS2 &

How to make a field Identity in Access Database

Hi All,
Attached is the screenshot which has a split form and if we are in the middle of entering a new record in the datasheet below it creates a new record already and gives the same ID to the next one,so while entering the next record the number again will be
7 instead of 8. However if i make the form a single form instead of a split form it works fine.
My code for Default Value of "ClaimRecoveryID" is
=IIf(IsNull(DLookUp("Max([ClaimRecoveryID]) + 1 ","[ClaimRecovery]")),1,DLookUp("Max([ClaimRecoveryID]) + 1 ","[ClaimRecovery]")) ( where ClaimRecovery is the name of the table and i think its giving
the next record as the 7 is not yet in the system. Can someone please help me on how to change my code.

To do that, you would need to assign the number before saving the record. As I mentioned, that is not a good idea in a multi-user environment.
If one user starts a record and you immediately assign the new number, it is not saved yet. Then another user starts a new record they would be assigned the same number, because that number will not yet exist in the table. Before saving the record, you could
check to see if the number already exists and change it, but that would defeat your purpose of displaying it immediately. The user would see 9 and it would change to 10.
If multi-user is not a problem, then move the line Me!ClaimRecoveryID = nz(DMax("ClaimRecoveryID", "ClaimRecovery"),0)+1 to the before insert event of the form.
I am also guessing that you are using this method of generating the number because you don't want any gaps in the numbering sequence. Should that not be the case, then simply change the field to an autonumber and you won't need any code. However, there will
eventually be gaps in the numbering sequence.

How to make a Bose sound deck access iTunes?

I am a real novice and this one is a bit around the houses, but I'd be grateful for any insight anyone can give me!
I bought a Mac Pro dual core about 3 years ago now. At the time I requested an Airport card, but when I got it home, it was not installed. My router ended up being right next to the computer so I connected by ethernet and forgot about it.
We moved quite recently and this became an issue. The wireless router is on the ground floor and the desktop, in the loft conversion! I explored retro fitting an Airport card, but I was told it was difficult and expensive (should have got the apple store to sort it out originally...). Anyway I ended up using a Netgear wireless extender, on the middle floor to boost the Virgin wireless router, with an Airlink dongle in the Mac's USB port, to get the internet in the loft.
This works fine (most of the time...). BUT and heres the issue today. My husband just bought a Bose Sound deck 10, which is on the ground floor. He wants to be able to play his music from iTunes (which is in the loft). He has today bought an Airport Express, thinking this was going to link up nicely. I can see how it could with the airport card, which we don't have. However it does seem that we should be able to make Airplay work, but the Mac can't see the Airport Express. Can I somehow use my extended wireless network of Netscape extender and Airlink dongle, to make this work??? I can't seem to find a way to access it.
Or can anyone suggest a better way to do this? Not sure if its relevant, but he has downloaded Remote from the app store to his iPad, to enable him to play his (vast) music collection on the Bose. the iPad can see his iTunes account from downstairs - so that distance doesn't seem a problem. Just back to the issue of how to get that music to play through the Bose.
I hope this makes sense. I am 8 months pregnant, so not a lot does right now to be fair. He's in a bit of a grump about it and I know if I don't sort it now...!!!
Thanks in advance.

If iTunes doesn't recognize a set of iOS device backup folders as valid then the chances of rescuing any data from them are slim. There are various iOS device backup extraction tools that may or may not do something useful, I've not had reason to test them.
If you want to backup your iTunes library (and you should) see this user tip.
tt2

How do I find claim code to access printables on HP Connected?

I have an HPDJ2540 and had it for a while. I have only just discovered the HP Connected site where you can get print outs for colouring, recipes etc and they look like they would come in handy for my and my family.I have looked through the forums and it keeps saying that HPDJ2540 can't have a claim code because they don't have ePrint.I have installed ePrint on my laptop and it has printed out a test page but there is no claim code on there.It says the print processor is Winprint but on previous test pages when just printing normally it says 'this is a web services printer'.I tried the IP address in the address bar but there is no web services tab on there or on any of the pages.If I can't get a claim code then how can I access the printables on HP Connected? I really would like to be able to access the printables. If I can't access because of my printer then will someone in HP be sorting this out as it seems alot of people use the HPDJ2540 and a 'it doesn't work on that printer' really isn't acceptable.Thank you in advance.

Your Mac won't have an IP address, at least not a valid IP, until you actually connect it to your home LAN. Not sure why you think you need the IP, you don't.
To connect to your home WiFi you need to know the SSID name, IE the name of your home WiFi, and the password for it. Once you have those two things click the little antenna looking icon on the right side of the menu bar and select your home WiFi name and click connect. A dialog box will pop up asking for the password, type in the password and click OK/Connect/Whatever.

How to make some junk code not deleted by the optimizer?

I'm doing a security application. I wrote this function to check for some license, that will throw an exception when a license is not present:
void CheckLicense();
Then I found this can be easily hacked, since the hacker can simply replace every CALL instruction to this function with NOPs, and then run the program without a license. To make life harder for hackers, I came up with this NULL pointer trap:
void CheckLicense(int **ptr)
int a = 42;
ALotOfCode();
*ptr = &a;
void CheckLicenseWrap()
int *ptr = NULL;
ALotOfCode();
CheckLicense(&ptr);
ALotOfCode();
int a = *ptr;
Now if the hacker bypasses CheckLicense, dereferencing ptr will break the program.
However this doesn't work when I switched from Debug mode to Release mode: commenting out the call to CheckLicense does not break the program as it should. I think it's probably because the optimizer deleted the statement "int a = *ptr", since
"a" is never used.
So the question is, how can I implement this NULL pointer trap without my code being deleted by the optimizer?
The best solution I can think of is "srand(*ptr)", but that will cause a side effect of resetting the RNG. I don't want my function to have any side effect. Nor do I want "if(ptr == NULL)", because that will likely make the trap very
obvious.

On 2/2/2015 10:19 PM, MacMillan_hopefullyUnused wrote:
Then I found this can be easily hacked, since the hacker can simply replace every CALL instruction to this function with NOPs,
Easier still, the hacker can replace the first few bytes of the function itself with RET, and not bother hunting down every call site.
Now if the hacker bypasses CheckLicense, dereferencing ptr will break the program.
What's to stop said hacker from bypassing CheckLicenseWrap instead?
Igor Tandetnik

How to make waaveform chart cmpatible to access cluster of data

I am new to LV.. and the concept of Clusters..
I have one sample program of two channel oscilloscope..
The waveform control is having pink border...but when I am trying to do same thing..my control is coming with orange border..
What property do I need to change to make my waveform control compatible to a access cluster of input signals.

The color of a wire/control/indicator is indicative of the data type.
The pink color you are seeing means that your data is in a cluster.
The orange color you see means your control is either double or single precision float.
A cluster of data can be sent to an XY graph, but not a waveform chart/graph.
To use a cluster for an XY graph, you should have a 1D array of X data clustered with a 1D array of Y data.
I'm assuming this is not what your cluster is right now.
You probably have a cluster with both channels of data from your oscilloscope.
Use the 'unbundle' function to extract both arrays of data.
Then build an array of each of the two 1D arrays. Pass this newly created 2D array to a waveform chart, and you should be all set.
Cory K

How to make the change code result available on development system

Dear Friends,
I have done the source code changes after check out code from the SLD.
In our SLD, the NWDI is installed on Development system and configured other systems are Training, Quality and Production.
I would like to view the result of changes on development system.
How can I do that?
Do I need to activate the code? or Check in the code?
I do not want to check in the code unless it is confirmed.
Please help me.
Early reply appreciated.
Thanks in advance.
Lakshmikanthaiah

Hi Pascal,
Thanks for ur prompt update.
Well, in my practice I gone ahead with on more step.
I check-in the code and asked for activation.
Meanwhile generated Activation Request Number displayed.
But even after that there is no changes resulting while executing the page.
Can you help me further on this.
Thanks in advance.
Thanks and regards,
Lakshmikanthaiah

How to make directaccess windows server 2012 access the IPv4 link

HI all,
I have built a directaccess for win7 with IPv4 only intrant successfully,and it work's good.but here is a problem that I can't access the IPv4 link,for example I can access
http://www.test.com ,but I can't access the url http://192.168.13.13 .I have many links use IPv4 address,so I can't access these resources through directaccess,what should
I do to make it works.

Hi,
Direct Access is an IPv6 technology. Clients send only IPv6 packets to DirectAccess server. We need an IPv6/IPv4 translator here.
Choose Solutions for IPv4-only Intranet Resources
http://technet.microsoft.com/en-us/library/ee382298(v=ws.10).aspx
And in windows server 2012 we have built-in NAT64 and DNS64.
Windows Server 2012 Direct Access – Part 1 What’s New
http://blogs.technet.com/b/meamcs/archive/2012/05/03/windows-server-2012-direct-access-part-1-what-s-new.aspx
Hope this helps.

How to make PC database like VB6+Access with java?

I mean the application has its own database and can be installed everywhere without SQL server. How can i do it?

If you're not tied to MS ACCESS, I would look at the FREE HSSQL database from sourceforge. It's easy to use from JDBC and doesn't requre any other software, so its ideal for a program that needs its own private database.

How to make a t-code to access maintain viewer(SM30)

Similar Messages

Maybe you are looking for