How to make Acquisition Value and Accumulated Depreciation NIL

Hi Gurus.........
I am very new into SAP.
Got stuck in one of the problem related to Asset Accounting.
My question goes as follows :
1. Acquisition cost of a Machinery $10000
2 Accumulated Depreciation  $2500
3. Net Book Value $7500 as on 31.03.2010
4. Sold the asset at Net Book Value $7500
It means net book value is nil now. Bur Acquisition cost still there $10000
and Accu Dep is also $2500 in the book . Now tell me how make nil
accumulated dep and Accusition value.
Need T code and procedure.

Hi Sanjib,
welcome to the forum.
You can use for example ABAVN or ABSO to make a complete retirement.
Then the values a zero for sure.
regards Bernhard

Similar Messages

  • How calculate original value and accumulated depreciation ?

    recently,FI department let me develop a report about fixed
    assets,which need show original value , accumulated depreciation. but
    my problem is I can not fix where I can draw out the correct data ,ANLC
    or ANLP ? FI key user told me that the T-code aw01n can show original
    value and accumulated depreciation ,infact ,it is true,but I don't know
    how T-code aw01n calculate that? specially, I can not fix the
    item 'value ajust' . can you give me a correct calculate formula?

    use logical database ADA - table anlcv
    or use fm FI_AA_VALUES_CALCULATE (look docu)
    hope that helps
    Andreas

  • YTD and accumul. depreciation have the same value when dpis is 2 years ago

    Hi all
    I am using FA and i have some problems. I have just setup this module and now i want to migrate assets in the system. The customer gave me an excel with the following fields that want to be in the system like: asset cost, accumulated depreciation, date placed in service, ytd accumulation and so on.
    the problems are:
    1) when i want to enter new asset manually the ytd depreciation and accumulated depreciation are required to be equal. ok so far, i register new asset on test environment and when i enter the date placed in service for example two years ago (because that is the real date placed in service of the asset) and run depreciation, the system has calculated correctly the accumulated depreciation, but has calculated the same value even for YTD depreciation which is not true, because in this case accumulated depreciation and ytd depreciation are completely different. how to solve this problem? How can i put correct values in this fields?
    2) when i enter these assets directly in the fa_mass_additions table according to the fixed assets user guide, i have the following errors: when i put "ON HOLD" on queue name, and open these assets on the system, the on hold field has no value (is empty)
    When i try to run post mass additions, the report is not finding the parameter (book) because the system is giving en error message telling me that there is no value in this list of values
    please help to solve this problems because i am not being able to migrate assets for the company.
    Thank you and best regards

    gaskins,
    You may have different Color Settings, and if you use Pantone you should be aware that the whole interpretation has changed (a number of times, most radically recently).
    If you say more, more can be said.

  • How to make Sales group and office field mandatory in VA01 first screen

    hi gurus,
    can anybody tell me how to make Sales group and sales office mandatory field on VA01 tcode first screen. i have requirement to make it compulsary on the first screen otherwise they wont be able to goto next screen.
    will reward points for sure
    thanks
    mandy

    Hi! Mandy,
    Try using t.code SHD0, choose your transaction variant here, further choose your screen variant.
    Next select your screen variant and in the Menu bar select Variant> change with processing>Make repairs in foreign namespaces only if they are urgent> Continue(Enter)>again 'enter'>Object can only be created in SAP package>continue(enter)> Exit and save >This variant contains other screens, adopt these as well?>enter>enter> scroll down to the entry required by you make the necessary changes(Output only, invisible or required) and save.
    The system will prompt to assign a package and request enter the necessary values.
    Provide your feedback.
    Regards,
    PATHIK

  • How to make visible value attributes of a Search Node

    Hi All,
    We have a requirement to enhance the search context node SEARCH ( Dynamic Query Object SVYQ ) of component SVY_S.
    But the enhancement category of Attribute Structure CRMST_QUERY_SVYIL is 'Can't be enhanced'.
    So we are adding value attributes to this context node. How to make this value attributes available in view configuration tab?
    Please suggest a better approach if there is any.
    Thanks in adv.

    Hi  Suchindra,
       You assign these  enhanced  attributes to design layer. so you can see these fields in Config tab.
    How to do:
    IMG->Customer Relationship Management -> UI Framework -> UI Framework definition -> Maintain
    design layer
    Here include the enhanced attributes and then go to component work bench and in context attributes right click assign the desing layer, selct your attribute and  in the bottom click on SAVE button.
    Then check it in configuration tab your attributes will available in show available fields.
    I hope this will solve your problem
    Regards,
    Sagar

  • How to make the dblink and what is the use of this

    plz any body tell me "how to make the dblink and what is the use of this"
    sujit

    Do you understand how to make the Slider work using code to read its value?  You will need to look into that in order to do this.
    What you can do is have the yello rectangle be a movieclip that sits over the red rectangle and use the Slider to control the yellow rectangle's alpha property from 0 to 1.  That way the yellow will gradually fade as you slide.
    What you will then need  to do is figure out how to make the number of dots that appear reduce from 15 to 8 over the same range of the slider.  You need to use the fractional value from the slider to decide how many dots either appear or do not appear.
    You should not start new postings for the same topics that you arlready have postings for.  Doing so in the future might result in them being removed.

  • How to make default values in selection field?

    hi,
          i have selection field date , using data element 'QENTST' using following code in view INIT Method. i get the input selection field when i test application.
    DATA: LT_RANGE_TABLE TYPE REF TO DATA.
    CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
      EXPORTING
        I_TYPENAME                     =     'QENTST'
      RECEIVING
        RT_RANGE_TABLE           =     LT_RANGE_TABLE.
    CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
      EXPORTING
        I_ID                                     = 'QENTST'
        IT_RESULT                         = LT_RANGE_TABLE
        I_OBLIGATORY                 = ABAP_TRUE.
    What i need now , to make default value in this selection field( low = sy-datum and high = sy-datum + 10 ) . I have checked , i found one method called... SET_RANGE_TABLE_OF_SEL_FIELD. Bt i m not able to understand how to assign values to input table parameter in this method?
    Thanks In Advance.
    Saurin Shah

    Hi,
    Refer this Article by Thomas on how to make default values in Select Options:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60474842-91ca-2b10-3390-d2fd30f335fd
    I hope it would solve your problem.

  • How to calculate acquisition value for specified day

    Hi,
    in my z program I have a problem how to calculate acquisition value for my asset for specified day.
    Example:
    I have asset created 8.7.2008 with TTYPE 104 (External asset acquisition) with value 5950.
    30.11.2008 there is another TTYPE 272 (Retirement of current-yr acquis., w/o revenue) with value 950.
    So BEFORE 30.11.2008 acquisition value is 5950. After is 5000. Is there any function module (or something else) in SAP system where I can send asset number and date a it return to me acquisition value for that day?
    Many thanks for any answer!

    Hi,
    your suggestion means that I have to compute acquisition value by myself (sum all TTYPE 1** - sum all TTYPE 2**). So SAP does't provide such functionality (LDB ADA have it, because it can compute acquisitiob value for specific day)?
    Mant thanks for answer

  • Photoshop Elements 8, How to show  hue, value and saturation of a specific area of a pickture?

    Hello,
    Photoshop Elements 8, How to show  hue, value and saturation of a specific area of a picture?
    How should I select the area? Which tool?
    Thank you in advance, Karl

    First make sure your Info Palette is visible : menu Window / Info (shortcut F8)
    In this palette, click the small     icon 'more'
    Choose 'Palette Options'
    and choose HSB for the second palette readout.

  • Calculating Acqusition value and Accumulated depriciation

    Hi,
    I want to create a new report which shows the acqusition value . accumulated depriciation and monthly derpricaition for an asset.
    I have used funciton module 'DEPR_RECALCULATE' to find acuistion value and accumulated derp , but the acq value displayed is always equal to the acquistion value at the fiscal year start , irrerspective of the period entered .
    ALso in my report if i enter period as 7 , then acq value for the asset in period 7 should be displayed . and accumulated depr upto period 6 should be displayed .ie acq for asset during the  period entered and accum depr till period-1 should be displayed
    Could some one help me with a proper way to calculate asset acq and accumulatd depr .
    I tried looking into the std report RABEST01 , but it uses logical database ADA .And I would notbe able to use logical db , as the accum depr and acq value need to calculated for diff periods .
    Thanks,
    Lalitha Iyer

    Hi,
    Try report RAHAFA_ALV01.
    After executing the above report, go to change layout option and choose below fields.
    1) ***.acq.value
    Acq value start of FY
    2) Accum.dep.
    Accum dep start of FY
    3) Start book.val
    NBV start of FY (1-2) minus
    4) Trans.acq.val
    Acq transactions from FY start to Report date (in selection screen)
    5) Trns.AccDep
    Accum dep from FY start to Report date (in selection screen), this field will have values only some transfer transactions posted to that particular asset
    6) PlndDep
    Planned dep from FY start to report date
    7) End book val
    End book value on report date (3+4-5-6)
    You dont need to create a new report for this requirement.
    Transaction codes for this report are the below
    AR03         
    S_ALR_87012004
    S_ALR_87012005
    S_ALR_87012026
    S_ALR_87012027
    S_ALR_87012035
    S_ALR_87012036
    S_ALR_87012064
    S_ALR_87012065
    S_P6B_12000064
    Thanks,
    Srinu

  • Can anybody tell me how to extract sales value and cost value for an materi

    dear all,
    Can anybody tell me how to extract sales value and cost value for an material sold .
    All the values of cost value and sale values are getting  stored in bseg-wrbtr field .
    How to identify them uniquely.
    Or there is another way to find the sale and cost values.
    Regards
    Mave

    Hi Mave!
    Normally there is no condition change, when something is sold.
    But sales price depends on sales conditions (not only price, but also surcharges, discounts, taxes - if customized).
    Nevertheless, after selling you have a invoice document, where correct values <i>should</i> be stored (see VBRP fields mentioned above). If here is a problem, then customizing of price determination is in question, not a programming of user-exits with MARD selection for costs (or some other tries to get a price).
    When you specify your requirements more in detail, you might get better answers - but currently only general hints are possible ('see in invioce / G/L accounts').
    Regards,
    Christian

  • How to make New Document and Upload Document to have same Content Type in Document Library in Sharepoint 2010

    Hi,
    How to make 'New Document' and 'Upload Document' to have same content type(Custom) in Document Library in Sharepoint2010.
    Note : I have created custom Content Type since I have custom columns along with upload column..
    Regards, Shreyas R S

    go to library settings 
    Change new button order and default content type
    set your custom content type to be #1
    when you upload new document it will automatically have your custom content type
    Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

  • How to make your iPad and iPhone commicate with each other

    How to make your iPad and iPhone commicate with each other

    this is very easy...
    firstly disconnect the DSL modem for the linksys..
    then connect the computer to the linksys router (port 1/2/3/4)..
    then access the linksys setup UI
    open ur web browser
    site: http://192.198.1.1/
    username: [blank]
    password: admin
    now hook up the westell modem.. and goto the status page ...
    check Internet IP.
    if then Internet IP is 192.168.1.* then,
    disconnect the westell from the router and goto the setup page.
    change the LOCAL IP address to 192.168.2.1 (notice the 2.1 and not 1.1)
    save settings....
    connect the westell and viola ur online...
    if the Internet IP is 0.0.0.0 then
    goto the setup page and change the 'Internet connection Type' to 'PPPoE'
    once done the page changes and give u a place to enter a username and a password.. this username and password is given by verizon..
    sud be something like '[email protected]'
    once done save settings...
    goto the status page and hit connect... give it a few moments... u shud get a Internet ip address... if u get one ur online if not then power cycle the entire network. and try check to see if u get an ip..
    hope this helps...
    cheers..
    Life is short... So get movin !!!
    DopeLorD

  • Assets table for Acquisition value and Equipment number

    Hi,
    What is the table that store the Acquisition value and the Equipment number of the assets ?
    Please help
    Regards.

    Hi Jehade,
    ITOB table records the changes made in the equipment master records.
    But I think it is better for you to use the view V_EQUI  instead of ITOB table. If you use the table ITOB in any report it may hamper the performance of the report.
    Please refer the SAP NOTE # 335537 - ITOB Should not be used
    Hope this can help you
    Tarek

  • How do we pass values and Internal tables to Sub-routines

    how do we pass values and Internal tables to Sub-routines

    Hi,
    You can use the USING..or TABLES..or Changing addition..
    Check this example.
    DATA: T_MARA TYPE STANDARD TABLE OF MARA.
    PERFORM DISPLAY USING T_MARA.
    FORM DISPLAY USING LT_MARA LIKE T_MARA.
    DATA: WA TYPE MARA.
    LOOP AT LT_MARA INTO WA.
      WRITE: / WA-MATNR.
    ENDLOOP.
    ENDFORM.
    Thanks
    Naren

Maybe you are looking for