How to make an infoobject as data target

explain a step by step procedure...

Hi Jay,
for this two options are there....
first one> Goto info provider Tab> select your info area> and right click it> and select INSERT CHARECTERSTIC AS INFOPROVIDER option..
and there you need to insert your info object name...
otherwise... when ever you are creating info object that time itself.. in the info object creation screenn-> Mastr data / texts tab---> selct Charecter Is a Info provider option..-> check that checkbox.. and enter your info area name in that text box.. and activate it.
so, this means.. from your info object you can able to load the data ..and ... generate a report... from this object..
regards
@jay

Similar Messages

How to make use of adjacent data elements within the same buffer

Hi,
         Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
         Here I also attach my VI showing what I did.
    Thank you very much in advance,
                        Suksun
Attachments:
wheel_encoder_1.vi ‏98 KB

Hi Suksun,
      I hope you'll forgive me for distilling your code - mainly to understand it better. I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array. As in your code, the last velocity is being paired with the first position. If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
cheers
Message Edited by Dynamik on 01-07-2006 03:17 AM
Message Edited by Dynamik on 01-07-2006 03:19 AM
When they give imbeciles handicap-parking, I won't have so far to walk!
Attachments:
encoder2.GIF ‏14 KB
encoder2.vi ‏102 KB

How to make the exchange of data between 2 while loop in real time

hello
I have 2 while loop
the 1st while loop includes the data acquisition program
the 2nd while loop includes the control program
my question is how to make the exchange of data between 2 while loop in real time
I tried with the local variable and direct wiring between the 2 while loop
it does not work (there is a delay)
Solved!
Go to Solution.

Bilalus,
Queues are only good to transfer data if your application isn't deterministic. Since you are using Real Time, I am assuming that your application requires determinism. If you are using Timed Loops and you use queues to transfer data between your loops, you are losing determinism. In this case, you need to use the RT FIFO functions.
Warm Regards,
William Fernandez
Applications Engineering
National Instruments

How to make linkage query In Data Model for search

I want to make an linkage query as a condition for my report in BI Publisher. how to make the linkage in Date Model ?

This is the forum for SQL Developer, not for general SQL or PL/SQL questions.
Please repost this in the SQL and PL/SQL forum.

How to make an infoobject as an Infoprovider in 7.0

Hi Gurus,
Can anyone tell me how we can make an infoobject with master data as an infoprovider in 7.0. I went to infoprovider tab and added it as an infoprovider and
loaded the data again.The load was successful but still the data is not available for reporting.I cannot see my load request in the manage tab of the Infoprovider.

Hi Jay,
for this two options are there....
first one> Goto info provider Tab> select your info area> and right click it> and select INSERT CHARECTERSTIC AS INFOPROVIDER option..
and there you need to insert your info object name...
otherwise... when ever you are creating info object that time itself.. in the info object creation screenn-> Mastr data / texts tab---> selct Charecter Is a Info provider option..-> check that checkbox.. and enter your info area name in that text box.. and activate it.
so, this means.. from your info object you can able to load the data ..and ... generate a report... from this object..
regards
@jay

How to Make Field/InfoObject Required Entry/Mandatory in DataSel of IPackag

Hi All,
How to make InfoObject or field as required/Mandatory Entry in the Data Selection TAB of InfoPackage.(Flat File Extraction)
Actually I have already Checked Selection Option of my required fields in DataSource/Transfer Structure TAB but unable to make mandatory
Rgds,
C.V.

Hi,
you can do that using an ABAP program in teh infopackage. You should write code to trigger an exception and throw a message if the selection is not given.
If it is possible to give selection by calulating a date like thing you can automate with ABAP code once again and can use it in teh process chain.

How to make enhanced fields of data source delta enabled?

Hi ,
I have a scenario, in which we are using the DS 0CUSTOMER_ATTR to load the master data.There are some fields added to this data source but this fields are not delta enabled. I have tested these fields from R/3 side using BDCP, CDPOS tables. All the fields are writing the changes correctly. But when extracting them using delta they are not capturing.If we load the full,it is capturing all the changes.
So running full load every week is taking more time.
Can any one suggest how to make this fileds delta enabled to capture the change in BW side as well to extract only changed records?
Any help will be greatly appriciated !
Thanks & Regards,
Vishnu

HI,
It is not possible to load delta this data. Your datasource only detects changes in the customer table and when any customer has been modified the record is loaded to BW. In this moment the datasource fill the append extructure.
The problem is that if you modifies some record from the append extructure the datasources doesn't detects the changes. When you does a full load you are filling the append extructure for the entire records and it works.
If you want to catch this deltas you should make a delta datasource for CDPOS but depending on the number of records of the tables it won't be possible.
You could check if there is any event to detects the modification and create a delta queue datasource for the append extructure.
Then, you can mix both datasources in a DSO in BW.
You can look for a " how to create generic datasources which use delta queue"
I hope it helps

How to make reports based on Data block work on web?

I am using form 6i and oracle 9ias
I have successfully call the common reports from the form on the web using run_report_object, then web.show_documnet(..);
But when it come to the reports based on the data block from the form, it doesn't work. it always fetch all the records from the table which the data block is based
Anyone can tell me how to make that work?
thanks

I have successfully do this when I am running forms and >reports in localhostTell me how did you achieve this?
Did you have both Reports and Forms running under same oracle home?
and off course was it a clinet server architecture?
What version for Form and Reports did you use?
Which executables did you use and what was your call from forms? When you call from Forms, which Reports executable use to run the report?
The data integration can only be achive if both the product were running under same Oracle home and were in client server architecture. I do not think data integration is possible in web architecture.
Thanks
Rohit (Orcale Reports Team)

How to make a Infocube as data source and upload data? urgent

Hi all,
I have 2 same InfoCubes, and I want to make the test InfoCube(ZCO_1T) as data source and upload data to another Cube(ZCO_1), Now I has Generated Export DataSource on ZCO_1T and create a update rule between ZCO_1T and ZCO_1. what will I do the next step? Thanks.

hi delve,
once u generate datasource from test cube it acts as an data source for further upload.
now u choose update target3.x in additional functions in context menu of the test cube.
u will get an infopackage pop up with data target to the cube ZCO_1,processing to datatarget only.
selection criterion can bve selected from the first tab.
under schedule tab you can start extraction.
reward points if helpful.

How to Make a Infoobject as Mandatory while Uploading data

Hello All,
I have a Infoobject ZPOS_CAPO which has below attributes,
ZPOS_ZIPC
ZPOS_TYPE
ZW_LKCAPO
ZCOMP_COD
ZPOS_LAPO
While Uploading the data from flat file, i have to make ZCOMP_COD as a Mandatory.
When the data is not avialble for ZCOMP_COD , it has to throw an error message?
While Uploading the data manually, how can i make ZCOMP_COD as a Mandatory? I mean Without entering value for ZCOMP_COD , it should not save record.
Suggest me if you have any idea on this.
Regards
Naga

Hi ,
I am updating the data Manually for ZPOS_CAPO.
Like below procedure
selecting zpos_capo right click selecting Maintain Master Data
then it is asking below Entries
Point of Sale- APO c
Language Key
Point of sale - ZIP
Point of sale type
Warehouse link APO c
Company Code
Point of Sale - APO
Here when saving the entry with out Company COde value, the entry should not save.
But for Me it is saving the entry. So I have to make Company Code as Manadatory.
I do not have any Infosources for this.
Help me
Regards,
Raju

How to make BI Info obj Data element in-herit source DE documntn?

Say I am in ECC. I go to SE11, give table name MARA and then doubleclick on the dataelement 'MATNR'. Then I click on documentation. I get a popup with Short text " Material Number" and Definition "Alphanumeric key uniquely identifying the material'.
I am interested in the latter information that is 'Definition' - & in general whatever documentation comes up for data element in ECC.CRM.SCM,SRM.
Now I log into SAP BI. I find that under characteristic 0Material, the data element is /BI0/oimaterial. When I double-click this datamaterial and press the documentation button, the system says 'No documentation'.
My Questions:
1. IS there a switch we could turn on in source ECC/SRM/CRM/SRM so that the data element in SAP BI inherits the original source field data element documentation.
{ I am not too convinced of the argument- that in BI we have info objects in ECC we have fields - since I am talking of data element level information- I would tend to think of this as an oversight of the designers or de-prioritization !!}.
2. Could we have an ABAP workaround? That is, in BI we identify the tables that house the mapping between the source and destination data elementsa and take out this information. Then we extract the dataelement documentation by function DOCU_GET (from eCC) and use the mapping info above to link SAP BI data element with source data element documentation.
WHY do I want to punish myself as above? My use case is, we take out SAP BI Table, field, metadata etc and create a model in a modeling tool and physical implementation in a 3rd party DW database as our own canonical, application-agnostic corporate datawarehouse. I would want the source data element documentation to flow to this last system as well as the modeling tool.
Regards
Sasanka

That is, in BI we identify the tables that house the mapping between the source and destination data elementsa and take out this information. Then we extract the dataelement documentation by function DOCU_GET (from eCC) and use the mapping info above to link SAP BI data element with source data element documentation.
1) SAP don't supply this, I would imagine, because R/3 isn't the only possible source of data. I'm currently working on an app that extracts from R/3, an Oracle database and APO. From whence should I take the documentation for my MATERIAL info object? While being able to transfer the documentation of data elements might be very useful for your app, I can't see that generally it would be of interest to clients - I've certainly never heard of such a requirement. So, my opinion at least, it isn't a design flaw.
2) As you've pointed out, you can get the tables that do the mapping, so you know the source data elements, so you can get the documentation. I'm not sure of how to store the documentation, but the obvious candidate for a link between infoobject and dataelement would be master data of an own infoobject. You could wrap DOCU_GET in an RFC (if it isn't RFC enabled), and do a direct call between your 3rd party app and r/3 to get the documentation. For information about the mapping tables, I'd suggest asking that question specifically in one of the BI forums.
matt

Question: How to make EDQ Purge Project data after Finishing a Job?

Hi all
I know how to purge project data manually by clicking
but I am wondering if there is a way to make EDQ to Purge project data after Finishing a Job by itself.
Thank you in advance for all answer.

Hi,
In EDQ 9.0, there is no automated purge facility.
However, note that you can configure a job to write only bare metrics and the data and results data that you are choosing to stage (or indeed to stage no data at all) - and you can set such options up to be variable at runtime using a run profile. It is normally better to consider purging separately from the running of jobs, since any temporary footprint a job has in the results database is cleared up automatically in any case.
Regards,
Mike

Process Chain - How to make decision based on data in PSA and execute DTP

Need to create process in Process Chain, which will execute the DTP based on data in PSA.
Say we have two DSO A & B, both getting data from same datasource.
In process chain, we need to read data in one of the date field in PSA and make a decision, which DTP to get execute in process chain.
Say if date field contains year = 2000, than load to DSO A, if year is 2001, load data to DSO B.
Suggest the solution. ...

Hi,
Tyr this steps.
1) Develop ABAP process types
ABAP report to read PSA data using function module
Trigger events based on year
event1 -> for even year data
event2 -> for add year data
2) Develop local process chains for each DTPs and schdule it with events mentioned above.
Do reply with comments.

How to make an entry in Data Table,an Hyperlink in WAD

Hi WAD Gurus,
If I wish to make one full row of values which come from the query in the data table,Hyperlink in WAD, is there any way possible?
If not, please tell me a workaround..
Thanx in advance,
Gaurav Jasoria

you need to use table interface for the same.
check out the online documentation.
http://help.sap.com/saphelp_nw04/helpdata/en/d8/f3a83adae1a010e10000000a11402f/frameset.htm
Regards
Raja

How to make search between two dates accept null not obligatory search proplem

Hi guys when i search record between two dates it works ok success but you must enter date from and dateto first to to make search
i will show what i need from this example
I need to search dynamic by 4 textbox
1-datefrom
2-dateto
3-EmployeeNo
4-EmployeeName
but search i need must be dynamic meaning
if i enter employee no only give me employee no found in database
if i enter employee name give me employees found with this name using like
if i enter all 4 text box null and enter button search get all data
but i have proplem in this query when i need to search by click search button
i must write date from and date to firstly then write employee no or employee name if i need to search
so that i need to search by employee no alone or employee name alone without using date from and date to
And if i search without using datefrom and dateto it give me message error 'string wasnot recognized as valid datetime"
my stored procedure and code as following :
ALTER proc [dbo].[CollectsearchData]
@StartDate datetime,
@EndDate datetime,
@EmployeeID NVARCHAR(50),
@EmployeeName nvarchar(50)
as
Begin
Declare @SQLQuery as nvarchar(2000)
SET @SQLQuery ='SELECT * from ViewEmployeeTest Where (1=1)'
If (@StartDate is not NULL)
Set @SQLQuery = @SQLQuery + ' And (joindate >= '''+ Cast(@StartDate as varchar(100))+''')'
If (@EndDate is not NULL)
Set @SQLQuery = @SQLQuery + ' And (joindate <= '''+ Cast(@EndDate as varchar(100))+''')'
If @EmployeeID <>''
Set @SQLQuery = @SQLQuery + 'And (EmployeeID = '+ @EmployeeID+') '
If @EmployeeName Is Not Null
Set @SQLQuery = @SQLQuery + ' AND (DriverName LIKE
''%'+@EmployeeName+'%'') '
Print @sqlQuery
Exec (@SQLQuery)
End
Function using
public DataTable SearchDataA(string ConnectionString,string EmployeeNo,string EmployeeName, DateTime StartDate, DateTime EndDate)
SqlConnection con = new SqlConnection(ConnectionString);
SqlCommand cmd = new SqlCommand();
cmd.Connection = con;
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "CollectsearchData";//work
cmd.Parameters.Add("@StartDate", SqlDbType.DateTime);
cmd.Parameters.Add("@EndDate", SqlDbType.DateTime);
cmd.Parameters.Add("@EmployeeID", SqlDbType.NVarChar, 50);
cmd.Parameters.Add("@EmployeeName", SqlDbType.NVarChar, 50);
cmd.Parameters["@StartDate"].Value = StartDate;
cmd.Parameters["@EndDate"].Value = EndDate;
cmd.Parameters["@EmployeeID"].Value = EmployeeNo;
cmd.Parameters["@EmployeeName"].Value = EmployeeName;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
DataSet ds = new DataSet();
da.Fill(ds);
DataTable dt = ds.Tables[0];
return dt;
interface button search
try
CultureInfo ukCulture = new CultureInfo("en-GB");
FleetManagment.Fleet fleet = new FleetManagment.Fleet();
DataTable Table = fleet.SearchDataA("Data Source=" + value1 + ";Initial Catalog=" + value2 + ";User ID=" + value3 + ";Password=" + value4 + "",textBox3.Text,textBox4.Text, DateTime.Parse(textBox1.Text,
ukCulture.DateTimeFormat), Convert.ToDateTime(textBox2.Text, ukCulture.DateTimeFormat));
dataGridView1.DataSource = Table;
dataGridView1.Refresh();
catch (Exception ex)
MessageBox.Show(ex + "error");

Yes, the below code should not be passed any value: (I am not sure of the syntax in .NET,Sorry)
--If startdate len is 0 - do not assign this value
cmd.Parameters["@StartDate"].Value = StartDate;
--If endate len is 0 - do not assign this value
cmd.Parameters["@EndDate"].Value = EndDate;

How to make an infoobject as data target

Similar Messages

Maybe you are looking for