How to Make ASCP to consider Primary/Substitude Components First, then Primary/Substitude PO/PR?

Let's say, in finished good A, component C is the substitude of component B. Assuming the usage of both components in A is 1 unit.
Finished Good A:
Demand: 100
Primary Component B
Onhand Qty :  20
PO: 20
Substitude Component C
Onhand Qty: 10
PO: 10
Here is what we want. We want ASCP to cosider all on hand quantity first, then PO/PR. In this case, we want it to calculate like this.
100*1-20-20-10-10=40 for component B
By oracle standard planning logic, the planned order qty for component B is 100*1-20-20-10=50, right? The planning engine ignores the PO of the substitude component C.
Any idea on the setup change, workaround or how to customize it?

Please refer
ASCP Plan is Not considering primary and substitute onhands first and then Purchase orders in FIFO (Doc ID 1549571.1)

Similar Messages

  • HT2623 How to make my full name disappear when sending from my primary email address.

    I would like to make my full name disappear when sending from my primary email address. so the recipient when receives my email can see only my email address, i.e. email address of the sender. In Preferences, Accounts, my full name is greyed out and I cannot change it. If I try to do Custom, it would let me change it, i.e. delete my name from Full Name box, but then when Mail is closed and reopened, it would lose the previously saved Custom setting and go back to the same. All my other aliases associated with this email account work ok and the receiver sees only the email address.
    Does anyone know what is going on?

    What if you remove the .mac account from the Accounts panel under mail Preference?
    If that doesn't work, sign into the webmail at me.com, click the "sprocket" button and select preference, in preference go the the aliases tab see if you can remove the email address with your name. If not, go to composing tab see if there is anything you can remove from the +Identity: send email as field+. Good luck.

  • How to make Vista partition on the HDD as first one with Recovery CD

    Hello,
    i want to format and recover the information to my "Vista" (C://) partition, which is the first. But when i choose the option "Format and recover to an existing first partition on your hard disk(without RE)" the computer began to recover to "Partition Type: windows NT NTFS (ID: 07)" which size is only 1.50 GB.
    In the middle of the process it shows "not enough space on a disk"
    Question: how to make "vista" partition the first one? What is "the first partition" in the second option of formating and recovering the system?
    Thank You for Your answers

    Hi
    You can obtain from your friends (I am sure someone has it) Microsoft WXP installations CD and install OS on C partition. On Toshiba download page you will find chipset and all necessary drivers to make WXP running properly. When finished connect external HDD or USB memory stick and copy all your data there. you can also install Nero demo version and create data CD or DVD. It is lot of work but if you have time you can do this without any problems.
    Other way connect your HDD as external one to other PC and copy all your important data. Sorry but I do not see other solution.

  • Map with 500 pdfs. How to make a new file with only the first pages, new file with second pages etc.

    Hi,
    A client confronted me with the next question:
    I have a map with 500 pdf's in it.
    Is it possible to make a new file with only the first page of each pdf?
    After that to make a new file with only the second page of each pdf?
    And after that the third?
    Etc.
    Is that possible with an action?
    Or are there scripts for?
    I couldn't find them.
    I use an iMac with Acrobat XI.
    Any help is very welcome.
    Thanks in advance.
    Bornholm

    You can extract each page from each pdf as a seperate page.     Once this is done you can select the pages tocombine.
    You would have to write custom a custom JavaScript and programatically code the names to combine if the extracted file pages habvestandars naming that could  be programed. There maybe some security  coding you will have to do because of Adobe restrictions but this all documented in the Acrobat JavaScript Reference.

  • How do I get Firefox to check addon compatibility first, then ask me if I want to continue the Firefox update?

    How do I get Firefox to check add-on compatibility first, then ask me if I want to continue the Firefox update? The update process currently only tells me that an add-on has been disable after applying the Firefox update. The Options > Advanced > Update tab switch, "Warn me if this will disable any of my add-ons", does not seem to work.

    How do we check that new versions of FF are compatible with our existing Add-ons? I'm really quite over always having half of them not working after updating FF. It's very frustrating. Couldn't there be an option in the Add-ons menu that checks if they're compatible with a new version? Thanks.

  • Indesign to ebook-kindle: how to make table of contents link/jump to first page each chapter?

    I have successfully completed the "ebooks: from adobe indesign to the kindle store.pdf"
    I have InDesign CS 5, not 5.5.
    I did the indesign doc - export to epub, then converted that epub in Calibre to MOBI format for kindle.
    But how do I make a table of contents that link or jump to the beginning of its respective chapter head?
    THANKS!!!

    Yes, that fixed it, thanks! I had no idea they clashed like that. I ruthlessly purged all other tables of contents, and then used Layout > Table of Contents to create a new one, and it worked.
    It made more sense after seeing in this thread that table of contents styles are more like presets or entities than styles.

  • How to make a calendar above above other components?

    Hi all:
    I made a button and when I clicked it,I hope to show a
    datechooser above other components!How should I do it besides make
    a popup titleWindow?I need help !! Thanks much!

    You can use
    //declare in a place so that it is avaialble outside the
    scope of a function
    var chooser:DateChooser;
    chooser = PopUpManager.createPopUp(this, DateChooser)
    and position the control near the button.
    Once you decide that you do not need the popup call
    PopUpManager.removePopUp(chooser);

  • How to make close last tab actually open SuperStart rather then closing Firefox?

    Is there a way to make Firefox (or SuperStart) NOT close Firefox when the last tab is closed? I'd prefer for it to act like Opera in that it would make the SuperStart tab page appear instead. This way I have to choose to close Firefox by actually closing Firefox (such as clcking the red "x" in the corner of Firefox, etc).
    Just because I don't want the last tab open does NOT mean I want to close my browser.
    As a result of this current behavior, when I reopen Firefox I end up with that last tab showing up again, which of course I don't want either.

    Also make SuperStart your home page.

  • How to make my dynamic form pages flow correctly?

    I have created a dynamic form which has multiple questions with expandable text fields that will take multiple pages once completed.  I do not know how to make the form flow correctly past the first page.  I can attach the form if I knew how to do that.

    Thank you Paul.  Your editing assistance was greatly appreciated. I think I now understand that there should be only one page subform that is flowed, regardless of how many text box objects I have in my questionnaire. This did the trick.

  • How to make stop and start in one button

    Hello All
    My Question is how to make button that when I prees it first time work as stop button and when I press it second time work as start button, I hope if I found my answer soon.
    thank u all
    Best Regards

    It's probably not worth to add all these sequences, local variables, and parallel loops. Here's a somewhat simpler version, showing two possibilities: 0:using events, 1: not using events. Pick one!
    There are many other possibilities. It really depends what else there is.
    Message Edited by altenbach on 10-15-2007 06:59 AM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    StartStopMOD.vi ‏19 KB

  • How to make MDM work?

    Hi Guy,
    I'm newbie for MDM.I already intalled it on my machine(Window Xp)but dunno how to make it work.
    The installed components are MDM/Syndicator/Import server,Console/Import mgr/Data mgr/Syndicator.
    Do I have to install any component else?And Can you guy give me any guides/documents/Posts how to make it work.Cause I have to demo it next week but right now still blank about it...
    Thanks
    Parinya.

    Hi Jack,
    For Demo Purpose,
    1.Create few master records in R/3 Servers [ MM(Tcode MM01) /Employee(PA40) /Vendor(Xk01) /Customer(XD01) according to your MDM Repository(For Example "Products").]
    2.Extract those master datas from R/3 Servers.
    3. You will get the xml file of master datas.
    4.Open the import manager and import the xml file into  the MDM server.
    5.In Import manager ,you need to map the records[Source Fields(Imported records) VS Destination Fields(MDM repository)].
    6.Once you imported the record ,u can see the records in the MDM Data manager.
       We can Create/edit/Delete those records .
       We can merge the records for consolidation purpose.
       We can perform Data enrichments process   like Validation,Workflow,Assignments..etc.
    7.Once cleaned the Master records,it is ready to distribute to R/3 servers.
    8.Syndicator is used for sending data back to the R/3 servers
       Here also we have to do Mapping against R/3 servers.
       Using XI We can connect the R/3 Servers.
    Hope u will understand this.
    This is very simple example for MDC-MDH Scenario.
    For futher learning on how to create a repository/Enrich the mater datas, go through reference documents in the Service Market place.
    Best Regards
    Devaraj PK

  • How to make it to move

    hey
    here is a example that can draw 2 circles and 1 oval. I want to know how to make the second circle round with the first circle aloong oval.
    thank you
    fay
    [email protected]
    Attachments:
    Picture4.vi ‏40 KB

    The blue circle should be drawn as last element, using a loop. You just need to calculate the postion of the center. Quite easy if you use polar coordinates, since an ellipse equation is simply
    x = a sin Alpha + xoffset
    y = b cos Alpha + yoffset
    where a and b are the semi-axis of the ellipse.
    I have modified your vi accordingly. There is still some tunning to be done on the x and y offset, since the ellipse is not centered on the central circle.
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    Picture4[1].vi ‏51 KB

  • How to make new item show in ASCP Plan workbench.

    Item ATT.BVL3AHY is a new item without any demand. At item master, it is set as Planned so it is collected by ASCP. The item can be found in msc.msc_system_items with Plan_id -1. Plan id -1 corresponds to Collection. Planner needs to manuallty add planned order for this item at ASCP workbench of plan WIRELINE (PLAN_ID 3002) as attached but as the item cannot be found in WIRELINE plan, planner cannot add it. Please let me know how to make this item show in WIRELINE Plan workbench.

    Run this query:
    select mrp_planning_code from msc_system_items where item_name like '<Item_Name>' and organization_id = <Org id> and plan_id = -1
    If this returns 7 you dont need to run any collections.
    If this returns other than 7 then,
    create a simulation set under Item Attributes Mass Maintenance and then update the attribute MRP Planning method for this item to MRP/MPP Planning. Assign Simulation set to plan name and then rerun the plan. It should work.
    If you are still facing an issue, then raise an SR with Oracle.

  • How to make a "new photo to publish" be considered "published" without actually publishing it?

    how to make a "new photo to publish" be considered "published" without actually publishing it?
    I have some photos that are really just stubs that represent the other "real" photos to publish.
    I don't want to have to do a mock export/rendering of them just to make them appear published.
    Any ideas?
    Rob

    In one of my plugins I have a requirement to download and add photos from the remote server and populate the newly created published collection in Lightroom.  In this routine, I use the following code to add the images to a published collection using the method provided by Don above.
    [code]
    catalog:withWriteAccessDo('createcollection', function()
         newcollection = v:createPublishedCollection(h.title)
         newcollection:setRemoteId(h.id)
    end)
    catalog:withWriteAccessDo( 'NPGSetUpdates', function()
         newphoto = catalog:addPhoto(newpath)
         newcollection:addPhotoByRemoteId(newphoto,p.id,p.url,true)
    end)
    [/code]
    The biggest thing here is that adding a photo like this requires the code to reside within the withWriteAccessDo block.

  • How to make system consider Alternative unit of measure while creating BOM?

    Dear Experts,
    When creating a BOM, how do I make the system consider the alternative unit of measure if at the point of creating the BOM, I decide to use  the  component material  alternative unit of measure? The scenario is as follows:
    Header
    Material code is TK677, Base Unit of Measure is Litres.
    Components:
    Material code is RT677, Base Unit of measure is Litres.
    Material code is RV677, Base Unit of measure is Kilogram.
    When formulation is done in the laboratory, the components are weighed and measured in percentage weight. For example, 20% for first component (RT677)  and 80% (RV677) for the second component.
    To depict this, I maintain an alternative unit of measure of Kg  in the Material Master of RT677, and maintain the conversion factor (100kg = 116Litres) so as to enable me use Kg as unit of measure for material RT677 when creating the BOM.
    When creating the BOM, I enter Kg as unit of measure for material RT677, but gets the system error message ''Unit of measure KG not supported for material RT677 in plant NG00
    Message no. 29175''
    What do i need to do as I have already maintained Kg as alternative unit of measure? or which other better way should i handle this issue?

    Thanks a lot for your reply, it worked, it allowed me to create the BOM using Kg for component RT677. But the new challenge i am now facing is that when I try to create a process order copyiing this BOM, it gives me the same unit (Kg) for component RT677 whose base unit of measure is Litres.
    I actually want the process order to copy the BOM and use Litres  for component RT677 based on the conversion factor which I have maintained in the Additional Data window of the material master.
    The reason is that, the formulation done in the lab is measured in percentage weight, but this component weight is now scaled up to Litres when the component is pumped into the Blending Vessels as specified in their Blending Instruction.
    Please how do I ensure that when the master recipe is copied during creation of the Process Order, that the unit of measure will be the base unit of measure (Litres) despite the fact that I have used the alternative unit of measure (Kg) for this component during creation of the BOM.  
    Thanks

Maybe you are looking for