How to make cross domain calls using loadurl

I you all. I ran into a little situation in which i need to make a cross domain call using loadurl. Has any one implemented this as yet. using loadurl. Thank you.

Have a look here http://www.coldfusionjedi.com/index.cfm/2008/3/7/CrossDomain-AJAX-calls-using-ColdFusion
Gramps

Similar Messages

How to make a SOAP call using the PI 7.1

Hi All,
Can you please tell me how can we make a SOAP call using the PI 7.1?
Thanks in advance

Hello Shweta,
Could you please clarify your question? Do you mean you need to call some business system from PI via SOAP? Or do you need to test integration model using SOAP client?
If the requirement is to make a SOAP call to PI (send SOAP request to PI system), please refer to the guide which Stefan suggested in his post. The general procedure is the following:
1. generate concrete WSDL in PI (you can do it via PI's Integration Directory);
2. import generated WSDL to SOAP client (e.g. XML Spy described in the guide or soapUI which is free SOAP client);
3. create SOAP request message in the SOAP client and send it to the endpoint (in this case, it will be sent to PI).
This is general procedure for making SOAP calls to SAP PI using external SOAP clients. Please advise if specified steps should be described in more details or if there are any questions from your side regarding them.
If the question is about calling business system from PI via SOAP, then please refer to SAP Help, configuration of SOAP receiver::
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
My regards,
Vadim

How to Make a Video Call Using iChat to Someone Using MS Live Call

What do I need to do to make/receive video calls using iChat to someone who uses Microsoft Live Call (using Windows Live Messenger to register me as a contact)?
When I initially set up iChat, I selected AIM (AOL Instant Messenging) as my default messenger program. But I can't remember where I set that up. Where in iChat can I make that change from AIM to Windows Live Messenger?

If its anything like MSN you cant video chat with ichat.
The only way on MSN is.
aMSN http://www.macupdate.com/info.php/id/14200/amsn
Mercury http://www.macupdate.com/info.php/id/14970/mercury-messenger
Or both of you use Skype.
Mac version http://www.skype.com/intl/en-gb/download/skype/macosx/
Pc http://www.skype.com/intl/en-gb/download/skype/windows/
Or web based http://www.mebeam.com/

Did not know simple things such as removing hyphen from phone numbers will be so complicated. How do i remove the hyphen from stored phone numbers since i am not able to make a phone call using VOIP. Everytime i make a phone call i have to type the number

Did not know simple things such as removing hyphen from phone numbers will be so complicated. How do i remove the hyphen from stored phone numbers since i am not able to make a phone call using MobileVOIP. Everytime i make a phone call i have to type the number.

Go into your contacts and edit them.

Cross Domain Call in SharePoint Hosted app.

Hi, I am very new in SharePoint 2013 App dev and want to understand when actually Cross domain calls are required and how we can achieve it.
Getting host web site title from a sharepoint hosted app needs a cross domain call?
My point of confusion is some places I have seen we have to load SPRequestExecutor for getting data from host web but I am able to get it using changing the context to host web and then getting the title without using SPRequestExecutor:
appContextSite = new SP.AppContextSite(ctx, spHostUrl);
Nweb = appContextSite.get_web();
//Nweb = ctx.get_web();
ctx.load(Nweb);
What is the difference between the two( using SPRequestExecutor and not using) and what places we need to use it and where we can get data without it ?
please help me to resolve this confusion.
Thanks

Hi vmishr11,
When you use SP.RequestExecutor, it will execute asynchronously to get data from host web. It will use like below:
var executor = new SP.RequestExecutor(appweburl);
executor.executeAsync(
url:
appweburl +
"/_api/web/lists/getbytitle('Announcements')/items",
method: "GET",
headers: { "Accept": "application/json; odata=verbose" },
success: successHandler,
error: errorHandler
For SP.AppContextSite, it will execute in order to get data.
Here is a detailed article for your reference:
How to: Access SharePoint 2013 data from apps using the cross-domain library
Best Regards
Zhengyu Guo
TechNet Community Support

How to make a vedio call in windows mobile

sir iam using htc touch pro2 t7373 rhod100 i am use skype but i cant make vedio call how to make a vedio call in this mobile

Hi,
see: ADF Mobile: Start a phone call from app?
Frank

How to make different users to use different Plan_Tables?

How to make different users to use different Plan_Tables?
I want each user use his own's Plan_Table. How to achieve this goal?

qkc wrote:
How to make different users to use different Plan_Tables?
I want each user use his own's Plan_Table. How to achieve this goal?Which version of Oracle - if you're on 10g or later you are already (effectively) doing this.
If not, then copy the 10g strategy back to your version; in outline:
<ul>
drop all existing plan tables
create a table (but call it plan_table$) in the SYS schema (you may prefer to use SYSTEM) as a global temporary table on commit preserve rows
create a public synonym plan_table for plan_table$
grant select insert update delete on plan_table to public
</ul>
Look in $ORACLE_HOME/rdbms/admin/catplan.sql in a 10g version of Oracle to check how it's done.
Each user gets a private (temporary) table in their temporary tablespace whenever they use the plan_table
Their private data disappears when there session ends.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
There is a +"Preview"+ tab at the top of the text entry panel. Use this to check what your message will look like before you post the message. If it looks a complete mess you're unlikely to get a response. (Click on the +"Plain text"+ tab if you want to edit the text to tidy it up.)
"Science is more than a body of knowledge; it is a way of thinking"
Carl Sagan

I don´t know how to make a phone call whit my ipad...and how to sent a message? is it possible?

i don´t know how to make a phone call whit my ipad...and how to senSeleneGMt a message? What do i need? or is it impossible?

You can't; not natively, anyway, since the iPad is not a phone. If you want to make a call, you'll need to use some third-party Voice-Over-IP service such as Skype.
I'm not sure what you're asking when you ask about sending a message. If you mean a text message, you can either use iMessage, which can send messages to other users also running iMessage, or you can look in the iTunes Store for SMS apps, a few of which are available. They use separate services to actually send the message and so require an Internet connection, either WiFi or 3G.
Regards.

Hi iam using iphone 5s which is locked to EE carrer. I am not able to make a conference call using this phone in india

Hi iam using iphone 5s which is locked to EE carrer. I am not able to make a conference call using this phone in india

then call EE if they are your carrier

How to make a conference call from an iPhone

How to make a conference call from an iPhone

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf user manual

How to create cross tab reports using RAS SDK api with Crystal Reports XI

Hi Everybody,
Iam generating reports in a web-based application with Crystal Reports XI using Report Application Server(RAS) SDK API. The columns in my report exceed that of an A4 sized page. So, when I export that report to pdf, only those columns that fit to a page are showing up. To solve, this problem, I thought of using cross tab. But, I donot know how to generate cross tab report using RAS SDK API. I have tried to get some code from the internet. But, I did not find any java code for that.Can some one give me some sample code.It is very urgent.
Thanks in advance.

Hi,
The easiest way I use is to create the worksheet as regular table and then when i verify the data I get (non aggregate) I duplicate it as a cross tab.
In the duplication wizard I just need to define the axis (using drag and drop).
if you want to create a cross tab from the beginning you need to define that in the new workbook wizard (check the "cross tab" rather then "table"), chose your fields and define the place you want them.
The data point (the center of the cross tab) is aggregated as to your machine definition and will happen automatically.
for example: to find the amount of receipt by months:
On the left put the "Buyer Name", on top put the "Months" and in the data point put the amount.
What you'll get is something like:
months: jan feb mar apr ......
buyer_name
jhon_smith 100 50 30 250 ......
jhon_doe 80 45 90 453 ........
and so on.....

How to make a contact sheet using iPhoto

how to make a contact sheet using iPhoto

Which iPhoto version do you have?
In iPhoto '11 you can make the Contact Sheet by selecting all photos you want on the sheet, press ⌘P, and in the Print panel select "Contact Sheet". Set the number of columns, adjust the margins, and select the captions you want.
Then press the Print button.

If i make face time call using wifi ,will my sim or service provider charge me for that call?

if i make face time call using wifi ,will my sim or service provider charge me for that call?

No. It does not use cellular data.

I am about to buy spice fire one that runs through firefox operating system. So my question is that can I make a voice call using skype through this device ?

hie myself Paras from India
I am about to buy spice fire one that runs through firefox operating system. So my question is that can I make a voice call using skype through this device ?
please mail me your answer at [email protected]
edited email address as per the [https://support.mozilla.org/en-US/kb/forum-rules-and-guidelines Forum rules and guidelines]. You should get email notifications of replies to this thread.

With firefox OS 2.0 and above you can use appear.in to make video and audio calls via webrtc

Using JSONscriptRequest for cross domain calls?

Hi,
Looking through the REST SDK I see mention of the "JSONscriptRequest class" but I don't find much else about it.
Is this a jsonp callback and how can it be used?
Thanks

Hi Willem,
I've never heard of this "JSONscriptRequest class", but as far as I know, the REST SDK doesn't support JSONP callbacks or JSONP in general.
For cross domain request, you'll find CORS settings on your WebApplicationContainer Server settings page in the CMC, but I'm not sure how / if they work.
Hope that helps.
Jan

How to make cross domain calls using loadurl

Similar Messages

Maybe you are looking for