How to make daily mail sending using the action profile?

I have a LEAD. If the LEAD is not closed within 5 days after creation i need to send reminder to manager. 
So if the status of this LEAD is "open" and "today date" >= "planned finish date" the email must be sent to manager everyday until the status will be changed to "closed".

Hi Vipul
I need help in configuring the Optimization Rule on start condtion of action definitions. As i can see you have suggested to use the optimization rule in start condition. Would you please tell me how and where i can configure the rule for optimization
Please advise
thank you
regards
shankar

Similar Messages

  • Follow up task without using the action profile

    Hi,
    Is it possible to create the follow up task without using the action profile? If so, please let me know how we can do that?
    as per the requirements, i have to the custom coding that will automatically create follow-on task triggered by status change on the all the transaction type. Please guide me how can we do that.
    Task details (task id, description), I'm reading it from the custom table.
    Thanks for your help.
    Regards,
    Vaibhav

    Thanks Naresh for the response.
    Not sure if I can use the CRMV_EVENT. Even I'm not aware how to use that. Let me tell what i am doing in the logic.
    - implementing the logic in the badi order_save (method - CHECK_BEFORE_SAVE)
    - get the header and item details using the FM CRM_ORDER_READ.
    - get the status of header / item from the output of CRM_ORDER_READ.
    - compare the status with the custom table (having info of hearder type, item type, status, tast id, task description etc)
    - if status is different, create the task using the details from the custom table.
    now i want to write the logic to implement the last step. Do we have any standard FM where I can pass the task ID and it will create the task? Please help.

  • How to make my computer send all the audio through optical audio cable instead of headphone jack?

    Howdy,
    To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
    I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
    1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
    2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
    Thanks in advance!
    My desktop is: 
    ENVY h8xt,
    • Windows 8 64
    • 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
    • 12GB DDR3-1333MHz SDRAM [3 DIMMs]
    • 1TB 7200 rpm SATA hard drive
    • No secondary hard drive
    • 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
    • 300W Power supply
    • SuperMulti DVD Burner
    • Wireless-N LAN card (1x1)
    • 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
    • No Additional Office Software
    • No additional Security Software
    • No TV Tuner
    • Beats Audio (tm) -- integrated studio quality sound
    • HP USB volume control keyboard and mouse with Win 8 keyboard
    • Adobe Premiere Elements & Photoshop Elements 10
    And the laptop:
    HP ENVY 15t Quad    
    • Windows 8.1 64
    • 4th generation Intel(R) Core(TM) i7-4700MQ Processor
    • NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
    • 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
    • 8GB DDR3 System Memory (1 Dimm)
    • 1TB 5400 rpm Hard Drive
    • 24GB flash Hard Drive Acceleration Cache
    • No Additional Office Software
    • Security Software Trial
    • 6-Cell Lithium-Ion Battery
    • No Internal DVD or CD Drive
    • Standard Keyboard
    • HP TrueVision HD Webcam w/ integrated digital mic
    • 802.11 AC WLAN and Bluetooth(R) [2x2]
    This question was solved.
    View Solution.

    Hello @_goma,
    Welcome to the HP Forums, I hope you enjoy your experience! 
    I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
    To configure your desktop to enable the optical audio cable, I recommend following the steps below:
    Step 1. Click the Windows Key Button on your desktop
    Step 2. Type "Control Panel"
    Step 3. Select "Control Panel" in the top right-hand corner
    Step 4. Select Sound
    Step 5. Under the Playback tab, right-click the white area below the devices available
    Step 6. Select "Show Disabled" and "Show Disconnected Devices"
    Step 7. Connect your Optical Audio Cable
    Step 8. Select your Optical Audio Cable as the default device and click "Enable"
    Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • How to make a SOAP call using the PI 7.1

    Hi All,
    Can you please tell me how can we make a SOAP call using the PI 7.1?
    Thanks in advance

    Hello Shweta,
    Could you please clarify your question? Do you mean you need to call some business system from PI via SOAP? Or do you need to test integration model using SOAP client?
    If the requirement is to make a SOAP call to PI (send SOAP request to PI system), please refer to the guide which Stefan suggested in his post. The general procedure is the following:
    1. generate concrete WSDL in PI (you can do it via PI's Integration Directory);
    2. import generated WSDL to SOAP client (e.g. XML Spy described in the guide or soapUI which is free SOAP client);
    3. create SOAP request message in the SOAP client and send it to the endpoint (in this case, it will be sent to PI).
    This is general procedure for making SOAP calls to SAP PI using external SOAP clients. Please advise if specified steps should be described in more details or if there are any questions from your side regarding them.
    If the question is about calling business system from PI via SOAP, then please refer to SAP Help, configuration of SOAP receiver::
    http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
    My regards,
    Vadim

  • ISA570 - How to make my WebServer always uses the same Public IP

    Hi all
    I have reserved one IP of my pool to my exchange server.
    The Reverse DNS is configured for this IP.
    My exchange server is sometimes rejected by the other because it is using the first public IP of my pool to go on Internet, and not the one i would like.
    So in My ISA570, how to specify the public IP of my pool my exchange server will used ?
    Fo the moment, all my alias for each IP are created, the port forwarding is OK for my exchange server to send and receive mails, et the web OWA is OK.
    I have tried from the advanced NAT to force like this (the last line in this picture), but when it is enable, all my subsite are not able to join the Web Exchange interface...
    I am sure i made a mistake, could you please help me ?
    Thanks
    Kevin

    Is it an option to use Static NAT instead of Port Forwarding?  By that I mean, do you need to share the one Public IP from  your Pool of IPs with anything other than the Exchange Server?
    Shawn Eftink
    CCNA/CCDA
    Please rate all helpful posts and mark correct answers to assist others searching for solutions in the community.

  • How to make my iTunes Library use the music which is already on my NAS?

    Hi there,
    I know there have already been some posts around the forum about having the iTunes library on external harddrives or NAS's.
    Though my question is different to that question and the solution for those can't seem to cater for my issue.
    In the other posts, most of them have the music on their MAC's or MacBooks already, and it was more of a migration of their iTunes Library.
    My situation on the other hand is this:
    I have recently bought a MacBook Air and sold my PC Desktop. Before I sold it, I backed up everything to my NAS, so my music is now sitting on the NAS.
    I am now trying to have my iTunes library on my NAS instead of my MacBook Air. Since my MacBook Air is only 128GB, I cannot store all my music on my MacBook Air then migrate it to the NAS (Via some of the solutions I've found online). So those solutions would not work for me.
    That is why I am here, asking this question:
    If my music is already on the NAS, I have a clean iTunes (No music in it), and I don't mind if I my music folders get re-arranged from the doings of iTunes. How do I make my iTunes Library accommodate the songs I have on the NAS?
    The reason I want to do this is because currently I have an iPhone, iPad, MacBook Air and Apple TV. My home sharing is on, so as you can imagine, if I wish to stream songs, it would be handy to have them in iTunes.
    This is my first question, once this is solved, hopefully it will simultanously solve a second question I have in mind (Regarding having all my TV shows and Movies to be in the iTunes Library as well, the contents are currently on my NAS too).
    Your help would be greatly appreciated, as I am new to OS X (Always been a Windows person, as I was a big gamer).
    So far, I have to say, my experience on OS X and the Apple ecosystem is fantastic!

    Typing in all caps indicates shouting is considered rude and is difficult to read.  Many simply do not read such posts.
    The music sync is one way - computer to ipod.  The exception is itunes purchases.  File>Transfer Purchases
    You need to copy everything from one computer to the other.

  • How to make Custom Discoverer workbook use Custom Security profile of Apps

    We use Discoverer in Oracle Apps setup. We have added Custom security in our HR People Form of Apps.
    This Custom Security restricts one HR Emplpoyee not view other HR employee record except for himself/herself. Also maintining that they should be able to view all other employee's records.
    The following code was put under the Security Profile Form -- > Custom Security Tab
    exists (select 1
    from per_jobs b
    where ASSIGNMENT.job_id = b.job_id
    and (b.name not like '%HR%')
    and (b.name not like '%Human%')
    and ASSIGNMENT.assignment_number is not null
    union
    select 1
    from fnd_user fu
    where fu.user_name = fnd_global.user_name
    and fu.employee_id = PERSON.person_id
    and ASSIGNMENT.assignment_number is not null)
    Above security profile works fine for HR People Form.
    However, It does not work for our Discoverer Workbooks. I found a note on Metalink 422841.1 which talks about leveraging the Custom Security of Apps in Discoverer Report. I read it, but did not get much clue.
    Can Anyone help.
    Thanks

    Hi,
    If you want to use custom HR security with Discoverer you have to ensure that the correct security filters are applied when the Discoverer reports are run. These filters can use the supplied HR_SECURITY package or you can develop your own conditions using table lookups or functions. To get the filters applied to your reports you have a number of options:
    1. Build the security into custom folders using additional conditions
    2. Use custom database views in Discoverer and build the security into the views
    3. Use mandatory conditions in you Discoverer folders using either a function call or database contexts set at login time
    4. Use VPD (Virtual Private Database)
    I am not sure which of these options you are using to implement your HR security in Discoverer. The last option, VPD, is the most flexible and can give the best performance but maybe it is more complex to set up.
    Rod West

  • How to make my mail go into the trash when I select the trash can icon

    Nonsensically the default behavior for mail from google (setup either as push or fetch) is for the trash can icon to archive the mail (drop it into all mail) rather trash it. I was able to correct this behavior for the fetch mail account but for the mail setup as push I see no option. Can anyone tell me how to fix this?
    What kind of drugs were the designers on where they thought I would like to either archive all my junk mail or better yet have to login from my desktop and re-review it and then delete it again. That sounds GREAT for productivity! ***?

    tikvenik wrote:
    This is definitely an apple problem and not a google issue as plainly demonstrated by the fact that there is a setting located at:
    settings -> mail, contacts, calenders -> "account name" -> Advanced -> Deleted Mailbox
    It defaults to "all mail" but you can correct it to "Trash"
    The option simply isn't there for accounts setup as push. I am absolutely dumbfounded by this. How can they not fix such a simple yet ridiculous problem? There is no functionality to delete mail from my iphone.
    An option that's there when the account is IMAP but not there when the account is Exchange, and somehow that must be the iPhone's fault? When creating a calendar event for a 'local' calendar on the iPhone, I can set two alerts, but when I create a calendar event for an Exchange calendar, I don't have that option and am limited to just one. You might think that's plainly an Apple problem, but you'd be wrong since Exchange calendar events don't support multiple alerts.
    Point is, this is more likely a Google issue than an Apple one. Note that Google Sync and Gmail push email are beta products. There are a whole bunch of known issues that pertain to Google Sync and different mobile devices.
    But, you cam blame it on Apple if it makes you feel better...

  • How to make a gallery move using the mouse location

    Hey, I got a containers gallery whitch I made and I want the containers down outside the screen to come up when the mouse goes down.
    I hope you guys understand me. (If not please contact me in private and I will show you my flash).
    Thanks, Stav.

    hmmmm, I am running into a problem.
    There in use of the event inside my function.
    Problem:
    TypeError: Error #1034: Type Coercion failed: cannot convert flash.events::Event@4efa561 to flash.events.MouseEvent.
    Function:
    function checkMouseLocation(evt:MouseEvent):void {
    if (files_total > 24) {
      x_counter = 0;
      y_counter = 0;
      minY = 0;
      maxY = (Math.ceil((files_total-24)/6))*157.5 - 50;
      minMouseY = 0;
      maxMouseY = 800;
      for (var i:uint=0; i<files_total; i++) {
       if (mouseY >= 100 && mouseY <= 750) {
        precentMouseY = (mouseY-100)/700;
        contOldLoc = 100 + y_counter*157.5;
        tl["myMovieClip_" + i.toString()].y = contOldLoc -(maxY * precentMouseY);
       } else if (mouseY < 100) {
        tl["myMovieClip_"+i.toString()].y = 100 + y_counter*157.5;
       if (x_counter+1 < 6) {
        x_counter++;
       } else {
        x_counter = 0;
        y_counter++;

  • When I try to use autofil to enter my name address ect it requires me to click on each item , name, email ect how do I get it to use the whole profile

    when I right click on autofil a widow comes up with my profiles, I see no way to simply choose one and have all the info filled in. I have to click each item, name , address ect to have it show on whatever form I am trying to fill

    You can try one of the form fill extension:
    *Autofill Forms: https://addons.mozilla.org/firefox/addon/4775
    *Autofill: https://addons.mozilla.org/firefox/addon/262804/
    *fireform: https://addons.mozilla.org/firefox/addon/3193
    *Formito ( Form Filler ): https://addons.mozilla.org/firefox/addon/formito-form-filler/

  • How do I force Mail to use contact names in Address Book?

    I ~need~ Apple Mail to display sender names as I have them in Address Book. My students are Thai and have typed their sender names in Thai, so I can't recognise a thing. I've sorted all the names out in Address Book (in English) but Mail still displays sender names using the email default, rather than the names from Address Book.
    • Upon receiving new mail however, the message's sender name ~WILL~ show up as the name put in Address Book. HOWEVER, after viewing the message the name reverts back to the one specified by the email author!! After that I can't get the name to show up as the Address Book name!
    Is there a toggle somewhere? How do I force Mail to use the contact names from Address Book?

    Try unchecking this:

  • How to process a text file (mail attachment) using the sender mail adapter?

    Hi guys,
    Is it possible to process mail attachments using the sender mail adapter? Let's say I have a structured text file (attachment) which needs to be mapped and sent to target system.
    Post please any thoughts or experience.
    Thanks,
    Olian

    Hi Olian,
    Have a look at these helpful links -
    1. http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05&overridelayout=true
    2. http://www.riyaz.net/blog/xipi-configuring-the-sender-mail-adapter/
    3. http://help.sap.com/saphelp_nw70/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
    Regards,
    Sunil Chandra

  • How to make a photo STAY in the assets panel for future use for In browser editing?

    How to make a photo STAY in the assets panel for future use for In browser editing?
    When I delete a photo from a page, it does not stay in the assets panel. My client uses in browser editing daily. Once a week he changes a photo just for a day, then needs the previous photo to replace it. The original photo is not in the asset panel (or folder) for him to choose.
    When you upload a photo, it has an arrow in the asset panel. How do you use this as an asset?

    Sure ... right mouse click on  your page and choose 'Exclude Page from Menus' :-)

  • In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?

    In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?
    When I select the Apple Symbols font from the list accessed from under Format/"Show fonts"/collection-all fonts/Apple Symbol, and then continue typing, I get normal letters, if in a slightly different font.
    How can I type using the Apple Symbol font?  I want to use that font to include keyboard and cursor selections of actual screen symbols to help write easily understood explicit computer lesson emails to my 92 year-old mom from a few hundred miles away.
    Steve

    In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?
    When I select the Apple Symbols font from the list accessed from under Format/"Show fonts"/collection-all fonts/Apple Symbol, and then continue typing, I get normal letters, if in a slightly different font.
    How can I type using the Apple Symbol font?  I want to use that font to include keyboard and cursor selections of actual screen symbols to help write easily understood explicit computer lesson emails to my 92 year-old mom from a few hundred miles away.
    Steve

  • Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!

    Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!

    iWeb uses the domain.sites2 files to store its assets.
    You'll find it here :
    ~/Library/Application Support/iWeb/
    where ~ is your Home directory.
    If you take a computer with you, you have to store that file in the same location.
    It's not different from taking documents with you if you want to edit them.
    A solution is to remotely control your computer at home.
    TeamViewer, LogMeIn, Apple Remote Desktop or any VNC application you can use, like "Chicken of the VNC".

Maybe you are looking for