How to make  defaultly Ticked field  Unticked one  in BDC program

hi experts,
i m facing one problem while uploading the master data for Cost Center (KS01)
thru BDC .i m doing it with Recording method.
  when  i proceed in recording to Control View , there are two CHECKBOXES
which are TICKED DEFAULTLY 1)  Actual Revenues   2) Plan Revenues.
i want to UNTICK those, i did so while recording, the source code ( given after SHDB is over)  is also according to that,
BUT when i execute the recording ,   bothjCHECKBOXES are SHOWN TICKED.
which I dont want........
Can anybody share me the Solution plssssss on
[email protected]
every attempt will be rewarded.

Hi
After recording,
check the print program it should be
for (Actual revenues)
perform bdc_field       using 'CSKSZ-BKZER'
Planned revenues
perform bdc_field       using 'CSKSZ-PKZER'
it will work.
Even after this , if it is not working then create the BDC for change mode and change it or go with lsmw .

Similar Messages

  • How to make default values in selection field?

    hi,
          i have selection field date , using data element 'QENTST' using following code in view INIT Method. i get the input selection field when i test application.
    DATA: LT_RANGE_TABLE TYPE REF TO DATA.
    CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
      EXPORTING
        I_TYPENAME                     =     'QENTST'
      RECEIVING
        RT_RANGE_TABLE           =     LT_RANGE_TABLE.
    CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
      EXPORTING
        I_ID                                     = 'QENTST'
        IT_RESULT                         = LT_RANGE_TABLE
        I_OBLIGATORY                 = ABAP_TRUE.
    What i need now , to make default value in this selection field( low = sy-datum and high = sy-datum + 10 ) . I have checked , i found one method called... SET_RANGE_TABLE_OF_SEL_FIELD. Bt i m not able to understand how to assign values to input table parameter in this method?
    Thanks In Advance.
    Saurin Shah

    Hi,
    Refer this Article by Thomas on how to make default values in Select Options:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60474842-91ca-2b10-3390-d2fd30f335fd
    I hope it would solve your problem.

  • How to make valuation type field not changeable  in delivery tab of PO

    Hai friends,
                    I am new to badis..please guide me to solve the issue...
    how to make valuation type field not changeable  in delivery tab of PO...
    The field shd be in display mode only ...actually...there  a badi has been used before
    to get valuation type from a ztable depending on material and plant...
    Now ..my requirement is that the user shd not change the default value brought from the ztable...

    Hi SRINIVAS,
    You can achieve this from BADI only if BADI is allows you to do this. You cannot achieve everything from a BADI. Check if there is any expoting field in the methods that can be ticked for making the field in display mode. If not then you cannot achieve this from BADI.
    The field you want to default to display is a standard or zfield. If z, then you can changethe attribute of the screen field to Output only.
    Regards,
    Manish

  • How to make read only field in Task list?

    Hi All,
    How to make read only field in Task list?

    This can be done one of two ways:
    1. Customize the form in Infopath, right click your field and disable the control.
    2. Use JavaScript/jQuery on the page to disable the element.
    Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

  • How to make Sales Office field mandatory in VA01 initial screen?

    Hi,
    How to make Sales Office field mandatory in VA01 initial screen? I mean in the first screen where we enter the document type and the sales area?
    Regards,
    Ajit

    Dear Deepak,
    Thanks for the clarification.
    But, as far, I have understood the query - it is very simple and that is..
    Whenever one creates a Sales Order (T.Code: VA01), Parameter: Sales Office needs to be mandatory (for all Sales Order, irrespective of Customer Account).
    Until-unless, user won't enter the parameter: Sales Office, System will not lead to next page (now, here we need to enter Customer/ material etc...).
    I have answered the query, in this regards, only.
    Best Regards,
    Amit.
    Note: Pls. correct me, if I am wrong. Thanks for everyones guidance.

  • Vendor Master Management - How to make 'Corporate Group' field an autoupdat

    Vendor Master Management - How to make 'Corporate Group' field an automatically updated field
    Frnz,
    I am doing a Spend Analysis and thereby restructring some aspects of SAP and business processes. One of the intiatives is to leverage the 'Corporate Group' field in Vendor Master for getting the consolidated spend visibility at the corporate group level of vendors. So far this field wasn't been used to effect. I can update it manually, but the question remains is how do I do with the change management of the corporate group of large vendor base in the scenario of everhappening Mergers and Acquisitions. Are there any alternatives anybody can suggest ? (Like linking D&B numbers etc)
    Thanks in advance for your suggestions..

    Hi Shiv,
    Let me elaborate the purpose of using this field. I want to have a consolidated spend visibility across a corporate group which has multiple vendor codes. Its difficult everytime to group the spends of these vendors manually especially when the number of vendors are too high. Also sometimes the names of vendor companies may not indicate that these are from same corporate group but in fact they could be. In order to have the reports generated on corporate groups, I must maintain this field in vendor master or a Z table. But the problem here is, it should be possible to update this field as and when there are any mergers or acquisitions at vendor side and the corporate group of a particular vendor gets changed due to this. So this has to be effected in vendor master or Z-table automatically. I do know that there are certain agencies like Dunn & Brad (DNB) which provide possibly the details on corporate group of a company but its not fully effective for Indian Vendors as its not mandatory on them to have DNB number & also its a disconnected process and I was looking to connect it seamlessly to Corporate Group field so that I need not bother to update these things manually everytime. I also wanted to explore various possibilities of doing this.
    I hope I have spelled it out correctly.

  • How to make default Currency  depending upon plant in table entries

    Hi,,
    How to make default Currency  depending upon plant in table entries?
    I am making entries in SM30.
    I have the following fields in z table.
    plaant , material,month.year,PFvalue,Currency.
    Can  some body throw light for this issue,please?\
    I am familiar  with modification-events.
    With Regards,
    Jaheer

    Hi,
      In PBO, within a LOOP, table control is filled via a Structure/Work Area.
      In that module, code as follows,
    LOOP AT SCREEN.
        IF WA-FIELD1 = C_1 AND SCREEN-GROUP1 = C_G1.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
    ENDLOOP.
      Here, WA is a strcture & FIELD1 is its field, like that...
      I already did this.
      Check it out & Reply.
    Yours,
    R.Nagarajan
    We can

  • How to make tax classification field mandatory in sales order ?

    Hi,
    while creating sales order, " how to make tax classification field mandatory ".
    Please tell me the procedure.
    In tcode OVA2. what are the entries for fields,table.
    Regards,
    sapsduser

    Dear ,
    Could you please share why you want to make tax Classification field mandatory in sales order.
    Maintain Tax classification field for customer in Customer Master Data = (Sales Area Data - Billing document Tab page)
    Tax Classification field for Material in Material Master Data = Sales Org. 1 View.
    While creating sales order and enter customer and material system automatically fetch the tax classification related data into sales order.
    Tax is calculated based on the ship to party.
    Hope this will help you.....
    Regards,
    Manoranjan.

  • In PO how to bring default tick in info update?

    In PO how to bring default tick in info update? Please explain me very clear. I know the transaction OMFI is using. I need how to assign with parameter ID? Please be clear?

    Hi,
    Go to SU01, here enter the User ID and click on "Change" button
    Here in "Parameters" Tab, maintain the value for e.g. 01 or 02 (which ever key you are using) against Parameter ID EVO and save.

  • How to make manager approve more than one request in one time in SSHR

    Dear All,
    Anyone has an idea on how to make manager approver more than one request in one time in SSHR??
    for example, manager is having 20 requests to approve on Change Pay Function, he don't want to check one by one and approve it, he want to approve the 20 requests directly from one time, is there any solution for that??
    Thanks and Regards

    Hi Adel,
    As Vignesh has mentioned we don't have any standard functionality which will allow bulk approvals. We had same kind of requirement in performance management where the business was asking for a bulk approval feature which should be available to Skip level manager for approving the rating suggested by line manager. We had created a custom page which will list all the notifications and user can select the ones which S/He wants to bulk approve and click submit button. Internally we had called the workflow with item key and other required parameter and do the approval.
    You can have a work with your technical guy and can work on the same lines.
    Thanks,
    Sanjay

  • I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

    I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

    1-800-676-2775  apple support   tech support 1 800 275 2273
    If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
    click the apple----->click about this Mac ------> click on version----> until you see the serial number.  You may have to do this a couple of times if it freezes before you have all the numbers.  A camera might help.
    Good Luck

  • How to make Default ALV layout

    Hi,
    I want to make 'STANDARD view' as a default ALV Layout...If anybody execute my ALV Report STARD Layout variant should display by default. Other variant layouts they can select from drill down..
    I know class and method but i don't know how to write code for this with paremeters..Can anybody help on code please..
    CLASS : CL_SALV_WD_C_TABLE
    METHOD : IF_SALV_WD_COMP_TABLE_PERS~SET_STANDARD_VIEW
    My current ALV CODE
      DATA: l_ref_interfacecontroller TYPE REF TO iwci_salv_wd_table .
      DATA: l_value TYPE REF TO cl_salv_wd_config_table.
      l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
      l_value = l_ref_interfacecontroller->get_model( ).
    Thanks.,
    Subba

    Hi sarbjeet singh,
    Thanks for your reply...
    I didn't understand your answer...Already this view gone to production system and every USER created his own view..
    Now how can make default standard view to all users..
    If i keep Standard view as Intial view and release transport to production is it effected to all users and display standard view as initial view?
    Thanks,
    Subba

  • How to make Default the Higher-Level Manager of the employee

    Dear experts,
    how to make Default the Higher-Level Manager of the employee as Further Participant in performance management ?
    Regards,
    TVS

    Hi,
    The delivered BAdI below defaults in both the appraiser and appraisee as part-appraisers//Default Further Participants.
    BAdI Area: Appraisal Enhancements
    BAdI Definition: HRHAP00_DOC_DEF_DO (Appraisal - Default Further Participants)
    App. Enhn.: DEFAULT_ALL_MANAGERS     
    Implementation: HRTMC_DEF_OTHERS
    Implementation short text: Determine All Managers
    Implement this BADI  in SE18/SE19 and  write the desired code in the  BADI methods
    Hope this will help u out.....
    Regards
    Lakhan

  • How to make WBS element field in Notification a mandatory.

    How to make WBS element field in Notification a mandatory.
    Should I use USer Exit.
    In cutomization I didnt find ant standard customization

    Hi,
         If it is about WBS element field in Maintenance Order then check up user exit ;- IWO10009 PM Order: Customer Check for 'Save' Event
    For Notification i am not sure whether this field is ther , but anything u can perform checkings via 
    QQMA0014 QM/PM/SM: Checks before saving a notification
    Alternatively u can also explore via Transaction variant SHD0 ..
    regards
    pushpa

  • How to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?

    Hi,
    how to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?
    Rg,
    Karthik

    Hi Kamal,
    This note steps will no validation that the user actually enters a value and the message will be created even if this 'required field' is left blank.
    Any other way to validate the enter a value also?
    Rg,
    Karthik

Maybe you are looking for