How to make dependent parameters.

Hi,
My whole req is like that-
suppose i have 2 parameters supplier name and check number.
1-Now my req is like based on supplier number, value in check number should be populated.
and
2- if we are not putting any value in supplier number then all the check numbers should be populated.
I tried to implement 1st scenario, and fortunately i did it successfully.
can u plese guide me how to implement 2nd scenario with 1st scenario.
Thanks

Hi Hussein,
I have checked the topics mentioned in the thread. However, I could not find a solution for my query.
I require inter dependability, i.e when I enter the 1st para, the 2nd para has to be populated and vice-versa. Is this possible. Most of the threads have mentioned the hierarchical/sequential method only.
Thanks

Similar Messages

How to make Multiple parameters to sql query string seperated by ,(comma) ..

Hi,
I would like to konw how I can make multiple parameters to sql query string seperated by ,(comma) ..
For example, this parameters can be printed like 'abc,dde,ggf,eeg' ,once I use "join(Parameters!rpCode.Value,",")" with report builder ,
By the way, when I test this multiple parameters by Query Designer of report builder there was no problem,.(using Define query parameters, I put abc,dde,ggf,eeg)
however, when I run this report , it won't be executing , with (rsErrorExecutingCommand)
Plz, help me....

If its sql query then it should like this
Select t.*
from table t
inner join dbo.ParseValues(@Parameters,',')f
on f.val = t.ID
ParseValues can be found him
http://visakhm.blogspot.in/2010/02/parsing-delimited-string.html
or easier way is
Select t.*
from table t
where ',' + @Parameters + ',' LIKE '%,' + CAST(t.ID AS varchar(10)) + ',%'
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to make dependent choice lists grow dynamically?

Is it possible to have dependent choice list which grow as the new content is added for choice list item?
E.g If we have countries, states, cities as dependent choice lists. If contributor adds a new country the value should appear in the drop down next time. That value of country can be in turn be used to add states for it. The id of state in trun should be used to add cities. Is this possible?
Regards,
Pratap

Hello All,
by the way, it is very simple to let opltion lists grow dynamically, and moreover to have a predefined structure before.
First you create a table and fill the view for this table with you start values, as it has been described before in this thread.
Then you make the option list for the field Edit and Select.
And then, as you know, your predefined values are stored in your custom schTable (whatever the name is), but all the values entered by the user are stored in DOCMETA table!
All you need to do is to create a trigger with SQL Developer, so that on update and insert in table DOCMETA for your custom metadata field it is checked whether this value is already in your predefined option list stored in your schTable.
And if the value is not there, make the trigger add a new record to custom table with this value and related values as well.
Simple.
This is true for any option list with predefined value and updated by the end-user.
If it is dependent option list, then you need to add both values for parent and child fields in your custom table.
There is another problem for which I can not find a solution --> if the field depends on two fields...
Regards,
Guli

How to make input parameters as optional in the function definition

I have created a function for a data service which is at the Normalized layer and has 3 input parameters.
This function is called at the Integration layer in which we have to pass only one parameter. But for the remaning 2 parameters it is throwing an error as we cannot pass those parameters.
Is it possible that we can pass less number of parameters in the higher layer.
I had also made those parameters as optional in the function definition(by applying '?' while defining the arguments-e.g. $x as xs:string?), but error was thrown while generating the query plan.
I have attached a Demo project, in which i have defined a function at the normalized layer and this function is been called at the integration layer.
Thanks,
Kinjal

Thanks mreiche for the reply
But the problem is that while writing
function myfunction( arg1 as xs:string, $arg2 as xs:string?) { ... }
in function definition in the normalized layer, the query plan is throwing following error:-
com.bea.ld.QueryException: Cannot generate XQuery for the function {ld:DemoProject/Normalized/TestGeo}getGeo:3
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108) at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:290)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:248) at com.bea.ld.Server_ydm4ie_EOImpl_816_WLStub.executeFunction(Unknown Source) at workshop.liquiddata.xds.views.queryplan.QueryPlanPanel.compileFunction(QueryPlanPanel.java:583) at workshop.liquiddata.xds.views.queryplan.QueryPlanPanel.access$900(QueryPlanPanel.java:39) at workshop.liquiddata.xds.views.queryplan.QueryPlanPanel$5.run(QueryPlanPanel.java:469) at java.lang.Thread.run(Thread.java:534)
Caused by: com.bea.ld.QueryException: Cannot generate XQuery for the function {ld:DemoProject/Normalized/TestGeo}getGeo:3 at com.bea.ld.EJBRequestHandler.invokeFunction(EJBRequestHandler.java:720) at com.bea.ld.EJBRequestHandler.executeFunction(EJBRequestHandler.java:339) at com.bea.ld.ServerBean.executeFunction(ServerBean.java:95) at com.bea.ld.Server_ydm4ie_EOImpl.executeFunction(Server_ydm4ie_EOImpl.java:312)
at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:491)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:120)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:434)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:429)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Caused by: com.bea.ld.server.FunctionCallQueryBuilder$QueryBuilderException: The following parameter type is not supported: {http://www.w3.org/2001/XMLSchema}string?
at com.bea.ld.server.FunctionCallQueryBuilder.addParameter(FunctionCallQueryBuilder.java:257)
at com.bea.ld.server.FunctionCallQueryBuilder.buildQuery(FunctionCallQueryBuilder.java:99)
at com.bea.ld.EJBRequestHandler.invokeFunction(EJBRequestHandler.java:716)
But no error is thrown when I call this function at the Integration layer,using
for $f in mfunction( 'test', () )
and the output which i get is as expected.

How to make Dependent LOV in tablular form

Hi,
We created a tabular form.
Example: We have two form fileds with LOVs A and B.
Based on select list A, we need to refresh the second list B. Just like cascading LOV option in normal form(apart from Tabular form)
Please provide your valueble inputs.
Regards,
Meda

Please search the forum before posting a new question!!, it saves everyone's time
https://forums.oracle.com/forums/search.jspa?threadID=&q=tabular+form+cascading+lov&objID=f137&dateRange=all&userID=&numResults=15&rankBy=10001
Always include the following information when asking a question:
Full APEX version
Full DB/version/edition/host OS
Web server architecture (EPG, OHS or APEX listener/host OS)
Browser(s) and version(s) used
Theme
Template(s)
Region/item type(s)

How to make a link in textflow that send parameters to a function?

How to make a link in textflow that send parameters to a function?

In the examples included with the weekly builds there is a CustomLinkEventHandler.as example. Passing parameters would be done in the CustomClickHandler function. You could attach the parameters to the LinkElement as user styles using the setStyle API.
Hope that helps,
Richard

How to make default Currency depending upon plant in table entries

Hi,,
How to make default Currency depending upon plant in table entries?
I am making entries in SM30.
I have the following fields in z table.
plaant , material,month.year,PFvalue,Currency.
Can some body throw light for this issue,please?\
I am familiar with modification-events.
With Regards,
Jaheer

Hi,
In PBO, within a LOOP, table control is filled via a Structure/Work Area.
In that module, code as follows,
LOOP AT SCREEN.
    IF WA-FIELD1 = C_1 AND SCREEN-GROUP1 = C_G1.
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Here, WA is a strcture & FIELD1 is its field, like that...
I already did this.
Check it out & Reply.
Yours,
R.Nagarajan
We can

How to make an order on repeating frame using Formula Column?

Hi All,
I have a repeating frame dependent on some query, how to make an order on this repeating frame using a formula column defined in its group and dependet on values from the query?
Note: I'm using Reports 6i

Place your formula column at the top of the itm group and set the BREAK_ORDER to assc.. or desc...
Hope this helps
Hamid
if problem solved, close the thread.

How to make a clip art (diagram )interactive report?

Hello ABAPers,
                       I want help from you. I have a requirement like ..when i am excuteing a report i should get a clip art and the clipart which i got i have to double click on it there by i should get the details of that clip art. I have succeed till getting the clip art and from here i am not getting the idea how to make the clipart(diagram) active so tht when i am doubleing it i should get the details.
The code that i am using to get the clip art just copy and execute you will get the output till clipart.
*& Report ZCLIPART_IR                                                 *
REPORT ZCLIPART_IR.
START OF DO NOT CHANGE***********************************
DATA: docking TYPE REF TO cl_gui_docking_container,
      picture_control_1 TYPE REF TO cl_gui_picture,
      url(256) TYPE c .
DATA: query_table LIKE w3query OCCURS 1 WITH HEADER LINE,
      html_table LIKE w3html OCCURS 1,
      return_code LIKE w3param-ret_code,
      content_type LIKE w3param-cont_type,
      content_length LIKE w3param-cont_len,
      pic_data LIKE w3mime OCCURS 0,
      pic_size TYPE i.
END OF DO NOT CHANGE***********************
DATA : sum(4) , num1(4) , num2(4).
PARAMETERS: p_dummy(4) DEFAULT '4' .
PARAMETERS: p_dummy1(4) DEFAULT '5' .
AT SELECTION-SCREEN OUTPUT.
PERFORM show_pic.
START-OF-SELECTION.
*& Form show_pic
FORM show_pic.
   DATA: repid LIKE sy-repid.
         repid = sy-repid.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
    EXPORTING
      border = 5.
CALL METHOD picture_control_1->set_display_mode
    EXPORTING
      display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
    EXPORTING
      height = 50
      left   = 40
      top    = 30
      width = 190.
CHANGE POSITION AND SIZE ABOVE****************
IF url IS INITIAL.
REFRESH query_table.
    query_table-name = '_OBJECT_ID'.
CHANGE IMAGE NAME BELOW UPLOADED IN SWO0*****************
    query_table-value = 'ENJOYSAP_LOGO'.
    APPEND query_table.
    CALL FUNCTION 'WWW_GET_MIME_OBJECT'
      TABLES
        query_string        = query_table
        html                = html_table
        mime                = pic_data
      CHANGING
        return_code         = return_code
        content_type        = content_type
        content_length      = content_length
      EXCEPTIONS
        object_not_found    = 1
        parameter_not_found = 2
        OTHERS              = 3.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    CALL FUNCTION 'DP_CREATE_URL'
      EXPORTING
        type     = 'image'
        subtype = cndp_sap_tab_unknown
        size     = pic_size
        lifetime = cndp_lifetime_transaction
      TABLES
        data     = pic_data
      CHANGING
        url      = url
      EXCEPTIONS
        OTHERS   = 1.
        ENDIF.
        CALL METHOD picture_control_1->load_picture_from_url
    EXPORTING
      url = url.
ENDFORM.
Thks and waiting for your replies.

Hi ataran,
in case, your version of iMovie is able to import the footage, have a read here:
http://www.apple.com/ilife/tutorials/imovie/

How to make site root-relative links work in DW and Server both?

See details on buggy DW image link behavior, below. My question is:
1) how to make site root-relative links work in DW and Server both? Or…
2) how to reliably automate the change of several hundred legacy root-relative links of the form
/images/image.jpg to document-relative?
That is, to
../images/image.jpg or
../../images/image.jpg or
../../../images/image.jpg etc…depending on where the directory is.
The old format (/images/image.jpg ) used to work fine in my previous DW 8 configuration but appear grey in DW after “upgrading” to DW cs5.5 mac. (they look fine on the server, but it’s hard to edit image-heavy pages locally when they are all grey).
I tried changing the files to how DW creates root relative links now:
/public_html/images/image.jpg, which is a very easy, attractive root flow since there’s a one-to-one mapping. These look great in DW but are broken on the server!
I looked at the “advanced” site setup, and it looked like it might be possible to nuke the /public_html/ part of my server info…but it also looked like there was the potential for doing damage changing these settings, which are automatically generated from our server connection settings, which seem to work.
The “links relative to document/ site root” toggle…does that change how DW interprets existing links, or just change the default when you are adding a link? I have made 80% of the file links document relative…before wondering if root-relative isn’t better?
It sure seems less ambiguous for all those images if theres a way to make root relative work for DW design view, DW link check, and server.
Summary of buggy behavior: (see test with images here)
"old style" site root link
      /images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: "external link" (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a (existing format)
"new style" site root relative link
      /public_html/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: broken
      Ease of switching: easy
Document relative link
      ../../images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: good
      Ease of switching: hard (how to automate?)
Absolute link
      http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: external (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a...not a real option
Thanks!
Similar discussion on "/"

Hello again Jon!
Thanks for jumping on this.
All clear and understood about where publc_html is etc.
No contemplation of nuking the actual public_html directory on the server, just the "/public_html" text string at the start of the DW-generated links.
"/public_html" is automatically added to the front of the link in DW if I create the link with any of the GUI tools, if I have "site root relative" selected. And ""/public_html" ends up in the code, and gets uploaded that way to the server, where it (obviously) doesn't work.
Doesn't sound like it is supposed to work this way. Also, what seems to be the usual root relative format (/images/image.jpg) shows as a broken link in the GUI and an external link in the DW link check. All this togther makes me thinkI have some obscure setting incorrect?
The setting that caught my eye is manage sites/ site setup/ advance settings/ local info/ web url, which is automatically set to http://www.oasisdesign.net/public_html/
it gives an option to change it but it makes every effort to make this NOT look like something users should mess with:
Having gone through the more careful thought process during this post, I'm ready to do the experiment of changing the remote server web URL (why is it wrong by default?)...think I'll eat dinner first so there's 45 min to avert disaster if anyone knows this to be a bad idea!
Art
PS--don't have a local testing server...don't think this will solve the GUI broken link/ link shows as external problems.
Is there an easy, automated way to change links sitewide from document to root relative?

How to make an index in InDesign CC 2014.1 using a topics list?

Hi all,
I have read the long help document on how to make an index in InDesign CC 2014.1 using a topics list, and still can't work out what to do.
I have done a 548 page book, using a document for each chapter, and a book file to put them all together in the right order.
I now need to make an index at the back, as the author has many quotes throughout the book at the start of each chapter and section.
I have a list of those people quoted and want to upload this list and get the index feature in InDesign to find all instances of the name occurring in the entire book.
After reading the help document I still cannot work out how to do this.
My questions are:
1. Do you have to use an InDesign document as a source for the list of topics? If so, should the document be added to the book file or outside it?
It seems a bit recursive to have the list of topics in an ID document that is in the book file.
2. Once you have uploaded the topics into the Index feature, how do you get it to look for all instances of that 'topic' througout the entire book? I can't figure that out from the help documents. What do I select? Do I do it from the Index panel? Do I highlight the text in the source document? Not sure how to do this...
3. I need the names to list surname first of the quoted authors in the index. This command seems to be different between various editions of ID. For ID CC 2014.1 is it ctrl+alt+shift+]
4. To make the surname show first, what do I highlight? The topic? and then do ctrl+alt+shift+] and select find all as well? Or do I have to just go through the text and manually do this and ditch the idea of uploading topics first?
I am confused as you can see and any help with this is appreciated.

Sorry 007, I really thought you were posting a trick question as on the OCP tests.
Anyway, as Justin mentioned, if you have an index on ename, it may be used when doing a comparison predicate statement with the ename value.
What it depends on are several other things: stats, how many rows in the table, use of an index hint, etc.
Rather than questioning the group on this, why not just turn on autotrace and run the query for the different scenarios.
The output will show you if it used the index, number of rows returned, blocks read, etc.
SQL> create table emp (ename varchar2(40));
Table created.
SQL> insert into emp select username from sys.dba_users;
25 rows created.
SQL> commit;
Commit complete.
SQL> set autotrace on
SQL> select * from emp where ename != 'SYSTEM';
Execution Plan
Plan hash value: 2951343571
| Id | Operation        | Name      | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |           |    24 |   528 |     1   (0)| 00:00:01 |
|* 1 | INDEX FULL SCAN | ENAME_IDX |    24 |   528 |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter("ENAME"<>'SYSTEM')As you can see, the above used an index, even though there were only 25 rows in the table.
You can test each of your scenarios, one by one, including use of a hint.

How to make the Creative Cloud Uninstaller run silently ?

Hi all,
We created a deployment using Adobe Application Manager (AAMEE) in order to deploy Adobe Creative Cloud silently. That works fine. Now, when we uninstall the software, by running msiexec /x {productcode_of_the_msi_that_was_generated_using_AAMEE}, there's a log entry in the Event Viewer saying Removal success or error status: 0, which is good. However, there's one remaining entry in the "Programs and Features"-list in Windows 7 control panel: "Adobe Creative Cloud"
So I took a look in the registry and I found the uninstall string for that program: "C:\Program Files (x86)\Adobe\Adobe Creative Cloud\Utils\Creative Cloud Uninstaller.exe". Problem: this uninstaller won't run silently! Or at least I didn't find any switches / command line parameters to make it run silently. Does anyone know how to make it run silently?
Question for Adobe in case there are no silent options for this uninstaller : can you explain me why you create tools (AAMEE) to generate silent installers but still leave traces on the computer that can't be uninstalled silently???
As an application packager I would also like to address this general message to all the big software making companies out there (SAP, Oracle, Microsoft, Adobe etc.) : other big companies that buy your software, mostly want to install and uninstall it without user intervention. So please package it so that we don't need to spend extra time and money deciphering your fancy, exotic installers / uninstallers. MSI is quite a good standard you know...
Thanks all of you!

Hi,
If I understood correctly, you have created an installation package including creative cloud desktop app through creative cloud packager not AAMEE.
Adobe creative cloud doesn’t get uninstalled even if all the products and updates are removed from machine. But this will not cause any issues (or extra space) on installation of new package.
Its recommended that if the package is modified (adding more products or updates to existing package) and installed then it should be uninstalled via msi of modified package.
Thanks,
Ashish

How to make the swing drawings to appear in a specific jPanel?

hi,
I have a frame which I divided in two panels - one for the jComboBoxes/buttons and the other one for showing graphics. but the paint(Graphics g) overpaints it all =(
how should my code look like if I want some rectangles (depending on the combo choices and on button click which means update) to appear in the second panel?
the code's structure is like :
import *;
public class NewJFrame extends javax.swing.JFrame {
     private JPanel jPanel1;
public static void main(String[] args) {
          NewJFrame inst = new NewJFrame();
          inst.setVisible(true);
     public NewJFrame() {
          super();
          initGUI();
     public void paint(Graphics g) {
          g.fillRect (x, y, w, z)
     private void initGUI() {
          jPanel1 = new JPanel();
               // combo boxes and buttons
               // action listeners for them
          jPanel2 = new JPanel();
               // the place where the rectangles should be shown
               // and updated if combos are changed and button clicked
}now, I wonder if anyone could possibly give me a hint how to make it correctly, because I'm really a total newb in Java and I can't find any good examples from www which I've search through for the solution.
P.S. is there a plug-in for eclipse for visual programming of the graphics? =)
thank You for the kindest help!
J.M.

You should not be mixing AWT and Swing component in
a Swing application, so don't use a Canvas.
If you need some custom painting then you should
override the paintComponent() method of JComponent or
JPanel and then add this component to the GUIwhat does mean the override the paintComponent() method of JComponent or JPanel?
how can I add that component to the GUI?
=)
can you give a short code example, please! the code structure would be more than enough.
J.

How to make a UI Element visible or invisible

Hi,
I have a dropdown and three input fields in my screen.
Depending on the value in the drop down only one or two or three input fields can be made visibile or invisible.
Kindly help me how to make a field invisible?
Thanks in advance.
Regards
Shanthi

Hi Shanthi,
1. You will have to create custom Object type or subobject type depending on your requirement. Custom Object type can be created in SPRO-> Cross component -> UI Framework -> Framework definition -> define object type.
2. Go to configuration tab and create 3 different configurations of your view using different object type/subobject type. First Config will display all the three fields, second would display 2 of 3 and third config to display only one input field.
3. Go to Get_P_xxx method of your dropdown field and trigger server round trip (An event) to ensure that entire view is loaded every time you select value in dropdown.
4. Redefine DO_CONFIG_DETERMINATION method from your _IMPL class and here read values in your dropdown field. On the basis of value selected, you can trigger different configurations by using code:
me->set_config_keys( iv_object_type          = <lv_object_type>
                       iv_object_sub_type      = <lv_subtype>
                       iv_propagate_2_children = abap_true ).
Hope this helps.
Regards,
Bhushan

How to make a 2nd player in this racing game.

I'm using this tutorial to learn how to make games in Flash for a class, but it doesn't say how to make a 2nd player.
If somebody can show me the code to make alternative controls (W,S,A,D) for a 2nd car that'd be fantastic!
Thanks a lot,
Dd
http://www.emanueleferonato.com/2007/05/15/create-a-flash-racing-game-tutorial/

if (_root["car"+who].code == "player") {
if (Key.isDown(Key.DOWN)) {
               this["speed"+who] -= _root.backSpeed;
          //steer left - well, we could simply add or subtract a fixed angle (in degrees) to/from the car's rotation, but that's not good enough. In order to simulate a natural movement, steering must depend on speed, otherwise you will be able to rotate your car even if it's almost stopped and it will look like a propeller
          if (Key.isDown(Key.LEFT) && this["speed"+who]>0.3) {
               _root["car"+who]._rotation -= _root.rotationStep*(this["speed"+who]/_root.maxSpeed);
          //steer right - you already know what happens here
          if (Key.isDown(Key.RIGHT) && this["speed"+who]>0.3) {
               _root["car"+who]._rotation += _root.rotationStep*(this["speed"+who]/_root.maxSpeed);
You basically have to make a second conditional clause that starts:
if (_root["car"+who].code == "player2") {
if (Key.isDown(/*Insert KeyCodeValue of the Key you want to use*/)) {....
The AS2 keycodes can be found here:
http://www.adobe.com/livedocs/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveDocs_Parts&file=00001136.html

How to make dependent parameters.

Similar Messages

Maybe you are looking for