How to make direct selection handles visible against pasteboard?

When I go to transform/resize images inside frames using the direct selection tool, I can't see the handles of the actual image because they are white against a white pasteboard. I am using InDesign CS5 (ver 7.0.4) on a Mac. I have been using InDesign for a few years and never noticed this was a problem; all of a sudden, the handles seem invisble. I don't remember what the color scheme was before. (Maybe I am losing my mind). Did the colors change with an update? There is an option in preferences to select the color of the pasteboard, but this doesn't seem to have any effect. In the meantime, I can't find the handles to resize/transform images. I can input a percentage for scaling, but this is only useful sometimes. How do I make direct selection handles visible against the pasteboard?

Not specifically a path. When I select an image in a layout with the selection tool, yes the frame border is the color of the layer. When I select the same image with the direct selection tool to see the full extent of the uncropped image, the border of the image is white with white handles. Since my pasteboard is white, I can't see the image border when it extends off my color layout and onto the pasteboard.

Similar Messages

How to make a new section visible in the server published version

I use UPK 12 Client.
When I click "Link a new section" in an existing Module, I can see it in the outline in the left pane in my UPK 12 Developer. When I then check-in all items, click Publish > select c: drive (a test folder) > Publish entire outline, the outcome includes the new section created.
When I do the exact same procedure, but choose to click Publish > server (which is set up for my UPK) > Publish entire outline, the outcome does NOT include the new section created, but everything else yes.
How to make the new section visible in the server published version?
Thanks!
Sille

Hi Sille,
Are you publishing over knowledge center? or is it publishing to a network drive? Once you check in the section save the module once and try again. See if it makes any difference.
best regards,
SD

How to make a SELECT LIST READONLY

Hi,
I have a form to update the existing values in a table. Primary column is based on a Select List.
So when user goto update screen they SHOULD NOT BE ABLE TO CHANGE the primary filed(means the value display in the Select List).
SO to make this one I have make that select list read only. But not like other items even when we make select list read only it still allow user to change the value. So basically read only property not working for select text.
There are many post in this regading same issue. Some of them recomended to make it disabled. But when we make a item disabled then when user POST that form, Apex not POST any disabled item values. Basically disabled items values not passing next form. So making item dissable also not a solution.
I have read almost 20 post in here regarrding this and didnt get any solution for this. So please let me know if anyone knows how to make a select list read only (which is working same as read only text boxes, means that value pass when user POST the form).
Thanks in advance...
mc

You define a function(this is based aorund jQuery selectors) in the page header like
<script>
var makereadonly = function(selector, makeReadonly) {
      $(selector).filter("select").each(function(i){
          var select = $(this);
          //remove any existing readonly handler
          if(this.readonlyFn) select.unbind("change", this.readonlyFn);
          if(this.readonlyIndex) this.readonlyIndex = null;
          if(makeReadonly) {
              this.readonlyIndex = this.selectedIndex;
              $(this).css('background-color','#CDCDCD'); //Adds a background colour to readonly item
              this.readonlyFn = function(){
                  this.selectedIndex = this.readonlyIndex;
              select.bind("change", this.readonlyFn);
      //For input items
      $(selector).filter("input,textarea").attr('readOnly','readOnly');
      $(selector).filter("input,textarea").css('background-color','#CDCDCD');
</script>and apply it using a jQuery selector (call it in the "execute on page load" or any other JS code)
makereadonly('#ITEMNAME1,#ITEMNAME2,#ITEMNAME3',true);Not that all of these methods(that act at the client side) will only prevent the user from modifying it 'normally', they could manipulate these readonly items using Javascript(or using firebug or any tool like that). So its better to make sure that your don't use the item value(from the page) for processing.

How to make software select on UI

May I know how to make software select. just click down the mouse and drag, then there will be a dot line square. After release the mouse,
the things selected will change color to red.
When move mouse over one object on UI, the mouse icon with change to the one with 4 arrow to 4 direction. If click down, the object will change to red color, other red
color object will back to normal color.
Any suggestion, thanks.

As the attached vi, when in runtime, the selected 4 object need to change color. Or the click one need to change color. Thanks.
Attachments:
ss.JPG ‏67 KB

How to use direct select and insert or load to speedup the process instead of cursur

Hi friends,
I have stored procedure .In SP i am using cursur to load data from Parent to several child table.
I have attached the script with this message.
And my problem is how to use direct select and insert or load to speedup the process instead of cursur.
Can any one please suggest me how to change this scripts pls.
USE [IconicMarketing]
GO
/****** Object: StoredProcedure [dbo].[SP_DMS_INVENTORY] Script Date: 3/6/2015 3:34:03 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <ARUN,NAGARAJ>
-- Create date: <11/21/2014>
-- Description: <STORED PROCEDURE FOR DMS_INVENTORY>
-- =============================================
ALTER PROCEDURE [dbo].[SP_DMS_INVENTORY]
@Specific_Date varchar(20) ,
@DealerNum Varchar(6),
@Date_Daily varchar(50)
AS
BEGIN
SET NOCOUNT ON;
--==========================================================================
-- INVENTORY_CURSUR
--==========================================================================
DECLARE
@FileType varchar(50),
@ACDealerID varchar(50),
@ClientDealerID varchar(50),
@DMSType varchar(50),
@StockNumber varchar(50),
@InventoryDate datetime ,
@StockType varchar(100),
@DMSStatus varchar(50),
@InvoicePrice numeric(18, 2),
@CostPack varchar(50),
@SalesCost numeric(18, 2),
@HoldbackAmount numeric(18, 2),
@ListPrice numeric(18, 2),
@MSRP varchar(max),
@LotLocation varchar(50),
@TagLine varchar(max),
@Certification varchar(max),
@CertificationNumber varchar(max),
@VehicleVIN varchar(50),
@VehicleYear bigint ,
@VehicleMake varchar(50),
@VehicleModel varchar(50),
@VehicleModelCode varchar(50),
@VehicleTrim varchar(50),
@VehicleSubTrimLevel varchar(max),
@Classification varchar(max),
@TypeCode varchar(100),
@VehicleMileage bigint ,
@EngineCylinderCount varchar(10) ,
@TransmissionType varchar(50),
@VehicleExteriorColor varchar(50),
@VehicleInteriorColor varchar(50),
@CreatedDate datetime ,
@LastModifiedDate datetime ,
@ModifiedFlag varchar(max),
@InteriorColorCode varchar(50),
@ExteriorColorCode varchar(50),
@PackageCode varchar(50),
@CodedCost varchar(50),
@Air varchar(100),
@OrderType varchar(max),
@AgeDays bigint ,
@OutstandingRO varchar(50),
@DlrAccessoryRetail varchar(50),
@DlrAccessoryCost varchar(max),
@DlrAccessoryDesc varchar(max),
@ModelDesc varchar(50),
@Memo1 varchar(1000),
@Memo2 varchar(max),
@Weight varchar(max),
@FloorPlan numeric(18, 2),
@Purchaser varchar(max),
@PurchasedFrom varchar(max),
@InternetPrice varchar(50),
@InventoryAcctDollar numeric(18, 2),
@VehicleType varchar(50),
@DealerAccessoryCode varchar(50),
@AllInventoryAcctDollar numeric(18, 2),
@BestPrice varchar(50),
@InStock bigint ,
@AccountingMake varchar(50),
@GasDiesel varchar(max),
@BookValue varchar(10),
@FactoryAccessoryDescription varchar(max),
@TotalReturn varchar(10),
@TotalCost varchar(10),
@SS varchar(max),
@VehicleBody varchar(max),
@StandardEquipment varchar(max),
@Account varchar(max),
@CalculatedPrice varchar(10),
@OriginalCost varchar(10),
@AccessoryCore varchar(10),
@OtherDollar varchar(10),
@PrimaryBookValue varchar(10),
@AmountDue varchar(10),
@LicenseFee varchar(10),
@ICompany varchar(max),
@InvenAcct varchar(max),
@Field23 varchar(max),
@Field24 varchar(max),
@SalesCode bigint,
@BaseRetail varchar(10),
@BaseInvAmt varchar(10),
@CommPrice varchar(10),
@Price1 varchar(10),
@Price2 varchar(10),
@StickerPrice varchar(10),
@TotInvAmt varchar(10),
@OptRetail varchar(max),
@OptInvAmt varchar(10),
@OptCost varchar(10),
@Options1 varchar(max),
@Category varchar(max),
@Description varchar(max),
@Engine varchar(max),
@ModelType varchar(max),
@FTCode varchar(max),
@Wholesale varchar(max),
@Retail varchar(max),
@Draft varchar(max),
@myerror varchar(500),
@Inventoryid int,
@errornumber int,
@errorseverity varchar(500),
@errortable varchar(50),
@errorstate int,
@errorprocedure varchar(500),
@errorline varchar(50),
@errormessage varchar(1000),
@Invt_Id int,
@flatfile_createddate datetime,
@FtpDate date,
@Inv_cur varchar(1000),
@S_Year varchar(4),
@S_Month varchar(2),
@S_Date varchar(2),
@Date_Specfic varchar(50),
@Param_list nvarchar(max),
@Daily_Date Varchar(50);
--====================================================================================
--DECLARE CURSUR FOR SPECIFIC DATE (OR) DEALER-ID WITH SPECIFIC DATE (OR) CURRENT DATE
--====================================================================================
set @Date_Specfic = Substring(@Specific_Date,1,4) +'-'+Substring(@Specific_Date,5,2)+'-'+Substring(@Specific_Date,7,2);
set @Daily_Date = SUBSTRING(@Date_Daily,14,4) + '-' + SUBSTRING(@Date_Daily,18,2)+ '-' + SUBSTRING(@date_Daily,20,2)
IF @Daily_Date IS NOT NULL
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where
CONVERT (date,flatfile_createddate) = CONVERT (date,GETDATE()) order by flatfile_createddate;
END
Else
BEGIN
if (@Date_Specfic IS NOT NULL AND @DealerNum != '?????')
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic AND ACDealerID='ACTEST' + @DealerNum;
END
ELSE
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic;
END
END
OPEN Inventory_Cursor
FETCH NEXT FROM Inventory_Cursor
INTO
@FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
WHILE @@FETCH_STATUS = 0
BEGIN
--==========================================================================
-- INSERT INTO INVENTORY (PARENT TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY]
DMSDealerID,
StockNumber,
DMSType,
InventoryDate,
FtpDate
VALUES (@ClientDealerID,@StockNumber,@DMSType,@InventoryDate,@FtpDate);
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
-- PRINT @errornumber;
-- PRINT @errorseverity;
-- PRINT @errortable;
-- PRINT @errorprocedure;
-- PRINT @errorline;
-- PRINT @errormessage;
-- PRINT @errorstate;
set @myerror = @@ERROR;
-- This -- PRINT statement -- PRINTs 'Error = 0' because
-- @@ERROR is reset in the IF statement above.
-- PRINT N'Error = ' + @myerror;
set @Inventoryid = scope_identity();
-- PRINT @Inventoryid;
--==========================================================================
-- INSERT INTO DMS_INVENTORY_DETAILS (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_DETAILS]
DMSInventoryID,
StockType,
DMSStatus,
LotLocation,
TagLine,
Certification,
CertificationNumber,
CreatedDate,
LastModifiedDate,
ModifiedFlag,
PackageCode,
OrderType,
AgeDays,
OutstandingRO,
Memo1,
Memo2,
Purchaser,
PurchasedFrom,
DealerAccessoryCode,
InStock,
AccountingMake,
SS,
Account,
AccessoryCore,
ICompany,
InvenAcct,
Field23,
Field24,
SalesCode,
Draft,
FTCode,
FtpDate
VALUES (
@InventoryID,
@StockType,
@DMSStatus,
@LotLocation,
@TagLine,
@Certification,
@CertificationNumber,
@CreatedDate,
@LastModifiedDate,
@ModifiedFlag,
@PackageCode,
@OrderType,
@AgeDays,
@OutstandingRO,
@Memo1,
@Memo2,
@Purchaser,
@PurchasedFrom,
@DealerAccessoryCode,
@InStock,
@AccountingMake,
@SS,
@Account,
@AccessoryCore,
@ICompany,
@InvenAcct,
@Field23,
@Field24,
@SalesCode,
@Draft,
@FTCode,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errorstate = ERROR_STATE(),
@errortable = 'DMS_INVENTORY_DETAILS',
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXECUTE [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_AMOUNT (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_AMOUNT]
DMSInventoryID,
AllInventoryAcctDollar,
OtherDollar,
PrimaryBookValue,
AmountDue,
LicenseFee,
CalculatedPrice,
OriginalCost,
BookValue,
TotalReturn,
TotalCost,
DlrAccessoryRetail,
DlrAccessoryCost,
DlrAccessoryDesc,
InternetPrice,
InventoryAcctDollar,
BestPrice,
Weight,
FloorPlan,
CodedCost,
InvoicePrice,
CostPack,
SalesCost,
HoldbackAmount,
ListPrice,
MSRP,
BaseRetail,
BaseInvAmt,
CommPrice,
Price1,
Price2,
StickerPrice,
TotInvAmt,
OptRetail,
OptInvAmt,
OptCost,
Wholesale,
Retail,
FtpDate
VALUES (
@InventoryID,
@AllInventoryAcctDollar,
@OtherDollar,
@PrimaryBookValue,
@AmountDue,
@LicenseFee,
@CalculatedPrice,
@OriginalCost,
@BookValue,
@TotalReturn,
@TotalCost,
@DlrAccessoryRetail,
@DlrAccessoryCost,
@DlrAccessoryDesc,
@InternetPrice,
@InventoryAcctDollar,
@BestPrice,
@Weight,
@FloorPlan,
@CodedCost,
@InvoicePrice,
@CostPack,
@SalesCost,
@HoldbackAmount,
@ListPrice,
@MSRP,
@BaseRetail,
@BaseInvAmt,
@CommPrice,
@Price1,
@Price2,
@StickerPrice,
@TotInvAmt,
@OptRetail,
@OptInvAmt,
@OptCost,
@Wholesale,
@Retail,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_AMOUNT',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_VEHICLE (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_VEHICLE]
DMSInventoryID,
InteriorColorCode,
ExteriorColorCode,
Air,
ModelDesc,
VehicleType,
VehicleVIN,
VehicleYear,
VehicleMake,
VehicleModel,
VehicleModelCode,
VehicleTrim,
VehicleSubTrimLevel,
Classification,
TypeCode,
VehicleMileage,
FtpDate,
EngineCylinderCount
VALUES (
@InventoryID,
@InteriorColorCode,
@ExteriorColorCode,
@Air,
@ModelDesc,
@VehicleType,
@VehicleVIN,
@VehicleYear,
@VehicleMake,
@VehicleModel,
@VehicleModelCode,
@VehicleTrim,
@VehicleSubTrimLevel,
@Classification,
@TypeCode,
@VehicleMileage,
@FtpDate,
@EngineCylinderCount
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_VEHICLE',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- MOVE CURSUR TO NEXT RECORD
--==========================================================================
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
END
CLOSE Inventory_Cursor;
DEALLOCATE Inventory_Cursor;
SET ANSI_PADDING OFF
END
Arunraj Kumar

Thank you.
And another question if the data is already there in the child table if i try to load alone it must delete the old data in the child tablee and need to get load the new data and
How to do this ?
Arunraj Kumar
You can do that with an IF EXISTS condition
IF EXISTS (SELECT 1
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
DELETE t
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
INSERT INTO YourChildTable
where Bkey1,Bkey2 etc forms the business key of the table
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to make a selection of a layer delete content and paste another content with Photoshop scripting..?

how to make a selection of a layer delete content and paste another content with Photoshop scripting..?

There is a more specific Forum …
Photoshop Scripting

How to make the exe always visible in the illust application.

Hi,
I created an interface for "illustrator CS" using Visual Basic and copied that exe in Scripts folder. I want to know how to make the exe always visible in the application(Not in Taskbar), once it was clicked. Could you please kindly help me to solve this.
Regards,
Prabudass

Hi,
I guess....though i am not pretty sure....but the Preview tab has been discontinued in the newer versions....
Only the Gods can give a perfect solution though...!!
<i>Do reward each useful answer..!</i>
Thanks,
Tatvagna.

How to make the exe always visible in the application window

Hi,
I created an interface for "illustrator CS" using Visual Basic and copied that exe in Scripts folder. I want to know how to make the exe always visible in the application window itself(Not in Taskbar), once it was clicked. Could you please, kindly advice me.
Thanks,
Prabudass

Hi,
I guess....though i am not pretty sure....but the Preview tab has been discontinued in the newer versions....
Only the Gods can give a perfect solution though...!!
<i>Do reward each useful answer..!</i>
Thanks,
Tatvagna.

How to make row selection by checkbox in ADF table

hello,
using jdev11g TP4 , fusion web application
when i drag my view object as ADF table into jsf page,
i want to know how to make row selection by checkbox
thanks
greenApple
Edited by: greenApple on Nov 10, 2008 11:33 AM

Hi,
the tree component has changed compared to 10.1.3. You no longer have a tableSelectmany component that renders as checkboxes. Instead you use the ctrl key and select the table rows
Frank

How to make it selected when clicked and open popup

Hi,
I 've a form in the parent page with many form elements.
I've 2 radio buttons with values "Yes" and "No". I am opening a modal popup when clicked on "Yes" radio button. The modal popup is opening fine.
But when I click "Yes", it' s not selected. After modal popup is closed, when I return to parent page, the option "Yes" is still not selected.
How to make it selected when clicked and open popup?

Perhaps try moving the application to your preferred desktop and then right-click it's dock icon > options > Assign to This Desktop.

How to make a select list editable or searchable like the combobox

Does anybody know, How to make a select list editable or searchable like the combobox? Do we need a plugin here, where I can get it.

Hi Nilesh,
If this is what you are looking for http://apex.oracle.com/pls/apex/f?p=32395:3:1202144397644679
get the combobox plug-in
http://www.apex-plugin.com/oracle-apex-plugins/item-plugin/searchable-combobox.html
I have not tried this though. Found it while searching for some other plug-ins.
Regards,
-Senthil

How to make text selection in RTL direction?

In my application, user need to highlight the text by mouse for arabic language. So how could I make the selection direction as RTL? Already my text aligned in 'right'. which component should I use?

So thanks, I did it, it works. How now to make next: I selected Id from list and in the next column appears name with ID from DB. so how to make ondemand process i know (thanks to you), but how to get value from LOV that I selected to give it to Dynamic Action.
Thanks

How to make field u201CMPN materialu201D visible in in transaction MEQ1

Hi, All!
In layout of screen 215 in transaction MEQ1 I see field u201CMPN materialu201D, but see this field is invisible for users. How to make this field visible?
Thank's,
Liza

Hi,
In SPRO there is no Field selection for QA. If you want to maintain QA based MPN( get the material number relevant to MPN). Press F4 and select the search criteria search by MPN, you will get the material relevant to that MPN.
Malleswari

How to make a UI Element visible or invisible

Hi,
I have a dropdown and three input fields in my screen.
Depending on the value in the drop down only one or two or three input fields can be made visibile or invisible.
Kindly help me how to make a field invisible?
Thanks in advance.
Regards
Shanthi

Hi Shanthi,
1. You will have to create custom Object type or subobject type depending on your requirement. Custom Object type can be created in SPRO-> Cross component -> UI Framework -> Framework definition -> define object type.
2. Go to configuration tab and create 3 different configurations of your view using different object type/subobject type. First Config will display all the three fields, second would display 2 of 3 and third config to display only one input field.
3. Go to Get_P_xxx method of your dropdown field and trigger server round trip (An event) to ensure that entire view is loaded every time you select value in dropdown.
4. Redefine DO_CONFIG_DETERMINATION method from your _IMPL class and here read values in your dropdown field. On the basis of value selected, you can trigger different configurations by using code:
me->set_config_keys( iv_object_type          = <lv_object_type>
                       iv_object_sub_type      = <lv_subtype>
                       iv_propagate_2_children = abap_true ).
Hope this helps.
Regards,
Bhushan

How to make the ERP orders visible in the interaction history????

Hi All
I am working on CRM 7.0, I am not able to find the ERP Orders created for business partners under the interaction history assignment block. How to make it visible
Regards
Jacopo Francoise

Check class CL_CRM_IC_IHISTSEARCH_IMPL (the view controller's class), method SET_ALLOWED_BT_OBJECT_TYPES, you'll see these values hard-coded.
Allowed Business object types:
gc_object_type-businessactivity TO me->gt_object_type, " BUS2000126
gc_object_type-service TO me->gt_object_type, " BUS2000116
gc_object_type-lead TO me->gt_object_type, " BUS2000108
gc_object_type-sales TO me->gt_object_type, " BUS2000115
gc_object_type-complaint TO me->gt_object_type, " BUS2000120
gc_object_type-task TO me->gt_object_type, " BUS2000125
New from CRM 7.0
gc_object_type-opportunity TO me->gt_object_type, " BUS2000111
gc_object_type-incident TO me->gt_object_type, " BUS2000223
gc_object_type-problem TO me->gt_object_type, " BUS2000224
gc_object_type-contract_sales TO me->gt_object_type, " BUS2000121
gc_object_type-contract_service TO me->gt_object_type. " BUS2000112
Rupesh

How to make direct selection handles visible against pasteboard?

Similar Messages

Maybe you are looking for