How to make Federated Portal Network Content available in a Consumer Portal

Hello Experts,
we have the following situation:
We have two NW 7.0 Portals: 1 Main Portal on and 1 BI-Portal
We would like to do a remote role assignment via the Federated Portal option in the Portal, so that we can make the BEX-Explorer role from the BI Portal available in our main Portal.
I've already created a connection to the BI-Portal (Producer-Portal) in "Federated Portal" and have already registered the main portal as the Consumer in the BI Portal. I used SAP Help for that:
http://help.sap.com/saphelp_nw04s/helpdata/en/67/7e70424edcc553e10000000a1550b0/frameset.htm
Now I have the problem, that I can not find the remote role from the BI Portal in the Identity Management of our main Portal? Does anybody has a idea (or maybe a solution ) how to fix this problem? The SAP Help is not very helpful, it always deals with the same notes...
Regards
Andreas
PS: Of course u can earn points!!!!

Hi
first of all i would check that the SSO is working between the two portals..
Log into one of the portal.. Change the URL to the other portal. If you have to log in, then there is a problem with your SSO. Remember to have enough permission on both the portal.
If that works, then log into the consumer portal and check what you find in the portal content of the producer portal.
Let me know the result, and I will help you further..
Best Regards
Kristoffer Engh

Similar Messages

How to make adobe flash player content on websites run on safari browser of my ipad?

How to make adobe flash player content on websites run on safari browser of my ipad?do I have to install adobe flash player on my ipad ?

The flash add-on is not available for Safari on iOS. Never has been and in fact Adobe has ceased support for flash for mobile devices in general. Your options, depending on the specific sites:
See if the site or sites in question have their own apps availabel in teh app store
Look into some browsers such as Puffin adn iSwifter (there are others, I beleive). These browsers use a third server site to translate the flsh content into a form that the iPAd can use and restreams them to you. They may not work with all content.
Use a computer capable of running flash.
Seek a source of the conent that is designed for non flash use.

Make full SAP Namespace Content available in ByDStudio

For some ByDStudio installations it may happen, that only the minimal the SAP namespace content is available. In the past it was possible to toggle the minimal namespace usage in the Copernicus options. This switch is no longer available.
In order to enable the full SAP namespace content the setting can be changed in the registry:
- Execute program regedit on your windows client
- Navigate to HKEY_CURRENT_USER --> Software --> Microsoft --> AppEnv --> 9.0 --> Apps --> CopernicusIsolatedShell... --> DialogPage --> SAP.Copernicus.Copernic....;
- Change "UseMinimalSAPNamespaces" from True to False

Hello, Mandeep!
the blog "Configuring a Federated Portal Network" solved my problem! I had to configure the SSO between the 2 portals and now it works fine!
Thank you very much!
Regards
Andreas

How to make BI 7.0 workbook available in analyzer

Hello,
I need your help on this: Basis transported my workbook including its role from 3.5 prod system to 7.0 prod system(due to our upgrade from 3.5 to 7.0).
I am able to see my workbook in the transport connection in 7.0 but it is not in the analyzer at all.
Please can you tell me how to make my workbook available in the analyzer?
Thanks.
Cesar

Hi,
Every month end I copy my workbook from the previous month to the new month. We just upgrade our system and when Basis copied 3.5 system to 7.0 i was working on period 3. In system 7.0 I can see my period 3 workbook. Now Basis transported my period 4 from 3.5 into 7.0 including its role. I canno see it even when I try to search it. I can see it in the transport connection but not analyzer. Any idea?

Yammer: How to make an External Network the default network to where to join?

Can I make an external Network the default Network which users join when the join Yammer. By default it's the Home Network (home domain) which they join when they register in Yammer.

Hi Freedomic,
Seems you've posted the same question in Office 365 Communit Yammer forum. Our Yammer support engineer
Jonathan Lee has provided a reply to your question there, could you please take a look and see if it's helpful for you?
Thread link:
http://community.office365.com/en-us/f/176/t/294326.aspx
If you have any further questions about this, I would suggest you stick with that thread in
Office 365 Community Yammer forum as here in this forum, we only discuss questions and feedback for Microsoft Office client.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to share/manage UWL/KM and collaboration with TWO consumer portals?

I'm working with a customer who is configuring a large enterprise landscape consisting of 2 federated portals with the two consumer portals sharing info.
Federated portal A is the primary corporate portal with respective producers.
Federated portal B is a regional producer portal with multiple back end producers.
IF they wish to configure UWL, I realize they can do this on each consumer portal. But how can someone logging into portal A see all their work items from UWL on A and UWL on B without creating two iviews (one for each UWL)? I bascially want to be able to share the UWL from one consumer portal to another. I haven't seen this in any docs, though. Anyone have experience with this?
Likewise, what is the best way to share collaboration rooms and other related services? Should they be configured on the consumer side of each federated portal, and if so - the same question arises - how to share the collaboration data between the two consumers.

Hi David,
we faced your first issue some months ago and found out that there is only the possibility to use 2 UWL iViews.
Maybe this has changed in the last releases.
HTH,
Carsten

How to link directly to a remotely assigned role in consumer Portal?

Hi all,
For our SRM implementation in the SAP NetWeaver Portal, we need to change the link in the emails. For example, if a user needs to approve a shopping cart, he receives an email with a link that sends him directly to the work item in the enterprise buyer.
So , we have created an iView for the Inbox of SRM. We have agreed with the customer that we change the link in the email that is being sent to a direct link to the Inbox in the Portal.
So we want the user to click on the link in the mail and to get directed to the Inbox iView in the Portal.
We use remote role assignment, so the Inbox iView is located on a producer portal. Users however, only have access to the consumer portal, where they are assigned the remote role.
My question is: How can we make a link that directs the user direclty to the remote role on the consumer Portal?
I have tried remote deltalinking, but that does not seem to work very well combined with remote role assignment. Any tip is highly appreciated and points will be awarded.
Best regards,
Jan Laros

Hi,
u need to do remote role assignment
follow this videos from elearning in sdn
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a015fd17-c26a-2b10-e6b1-aeecb3148fa9
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402797a4-c16a-2b10-1490-e366779500cc
Regards,
Satya.

Producer portal iviews are not rendered on Consumer portal.

Hello People,
We are currently in the process of upgrading our portal from EP7.4 SP03 to EP 7.4 SP07.
There are some remote iviews that we take from another portal.
These remote role assignment iviews do not open and no reports open assigned with them giving us the below error:
Could not open iView. The iView is not compatible with your browser,
operating system, or device. Contact your system administrator for more
information
These iviews work with IE9,IE11 but not with Chrome on the Consumer portal
These iVIews are rendering on the Producer portal (EP7.0) but not on the Consumer,newer version.
The issue with the remote iViews is only on Chrome. I did not find any SAP note or patch that can help with the compatibility for Chrome.
Does anyone has idea regarding this?
Any help is appreciated.
Thanks,
Deep

Hi All,
After some discussions with SAP support, we got a response saying that currently Chrome browser is not supported for Producer portal reports (See SAP Note 1655306 - Google Chrome for end
users and administrators).
Hence, we need to continue using only IE for such cases.
Thanks and Regards,
Deep Desai

How to make use of standard content in our SWCV ?

Hi all ,
I want to use the Interface , mapping etc., which are available in SAP Basis namespace . But i have added as dependency to my Software component version in SLD.
My question is
1. How can i use that added SAP Baisi objects to my namespace ?
2. How it will be useful for us ?
Please calrify
Regards.,
Shiva
Edited by: shiva s on Feb 11, 2010 10:55 AM

Hi,
>>>How can i use that added SAP Baisi objects to my namespace ?
you can create a message mapping in your own namespace with the use of message interfaces from this
sap basis SWCV
>>>2. How it will be useful for us ?
you can use predefined messages and create your own mappings for example
let's say you have an SRM proxy (outbound from ERP) but you want to send it to your legacy system
you import SRM content and the proxy will go via your configuration and your new mapping
Regards,
Michal Krawczyk

How to make more hard disc space available

Working in iMovie, I ran out of hard disk space so I cleared Trash and moved everything that was not essential for the task in hand onto a memory stick, including most applications such as iWork. However, no matter what I removed or cleared I was unable to recover half the 55GB nominally available on the McIntosh HD. What will be tying up the 25+GB of the nominal 55GB available and can I free it up?

actually most of the data is in the iMovie event, not the project. The project is small until you "Share" and then it contains a copy of the QT movie, that you can only see if you right click (control click) the project and "show package contents". you can toss those Qt movies (you can always make them again) if you want and they are there.
If you are sure you will never want the unused parts of the clips (stored in iMovie events) again, go to "move event to trash" and you will be prompted to delete
"delete unused" or delete entire clip. If you delete unused it will take a while to process, but will then trash every clip that you didnt use and any part of any clip you did use , keeping just that parts of the clips you used in your project. Then you will have to get them to the trash through the events browser window, then empty the trash. The other way is to choose "space saver" and that will toss (for all your events, not just the one you highlight) any clips not used, leaving the clips you do use alone, a safer way to free up space, but wont free up as much space.
roger

How to make files stored in APEX available to non-APEX user?

Our application generates a number of files that are stored within apex_application_files.
Some of these are to be made available to a non-APEX application. We intended to do this through a granting access to a view to the non-APEX schema.
In order to access apex_application_files you need to set-up workspace security, etc. This can be done (details are in this forum), but relies on querying apex_applications - this view filters the applications using 'USER'. Therefore, it will only return applications where the parsing schema matches the user making the query.
So... how can we make some files available to the non-APEX schema?

If making serious use of file storage in the database then the best approach would be to store the files in application tables rather than relying on apex_application_files. This gives you total control over security, storage, associated metadata and so on.

How to make a Discussion Forum like this one with Oracle Portal Applications

Hallo,
My colleagues and I are trying to make somthing similar for our planned intranet-platform and I wonder if there are some prefabricated modules which can be used (we are all enthused by the features of your Discussion Forums).
Maybe you can provide us with papers ("construction plan") how to bring such functionality to our intranet (I searched the Oracle page, but did not find papers of this content).
Thanks,
Chistian

Yes, this would be great. I have looked at some of the Partner Applications but the only module we want is this kind of a threaded message board. I would be very appreciative of this information as well.

Can you make certain social network applications available in all countries?

I've recently been hearing a lot about the application Yik Yak, and I wanted to download it. However, when I went to download it, I found out it wasn't available for Singapore users, but only for United States users. This I find rather unfair because there are a lot of people all around the world who are unable to download certain applications or even purchase certain items from the itunes store, simply because they do not live in the United States. Is it possible, to make certain applications and even items accessible to the whole world rather than just the US?

Contact the developer.
http://www.yikyakapp.com

How to make the spry Collapsible content to appear/expand from the top of the tab - not bottom?

I hope this question does not sound confusing.
When I click the Collapsible tab, I want the content to appear from the top - not the bottom. (See example link: http://www.longhollow.com - click "Time & Location" on the top right and you will see the content appear on the top). Do you know how to do this? I am not jquery expert, I would be appricate if you know how to do this.
Thanks!
Christie

http://try.jquery.com/
http://learn.jquery.com/
https://tutsplus.com/course/30-days-to-learn-jquery/
http://www.w3schools.com/jquery/
Nancy O.

Preview: How to make "Rotate without modifying contents" the default?

In Snow Leopard, the Preview application finally learned to modify the orientation of JPEG images by simply adjusting the orientation tag in the EXIF headers and (unlike previous versions) without touching the rest of the data at all. To use this feature, you have to rotate an image to the correct orientation, select "Save As" and then check the "Rotate without modifying contents" option before you click on the Save button.
Unfortunately this option does not seem to stick (I have to check the box again every time) and it is not used when you select "Save" or "Save All" instead of "Save As". So if you want to browse and rotate a large number of photos from a camera without an orientation sensor, you have to repeat the procedure above for every single shot taken in portrait orientation, or otherwise Preview will re-encode the rotated images at an arbitrarily chosen compression ratio and thus degrade their image quality.
Is there any way to make Preview
a) keep the option selected and, more importantly,
b) use it by default when selecting "Save" and "Save All" as well?

tartan66 wrote:
B. Associate the Rotate Canvas dialog box with a keyboard shortcut so even if it won't stay open I won't have to fish thru the Image menu to get it each time.
I'm not really sure if this is documented but you can navigate the entire menu using the keyboard. (I only have up to PSE 3 so I'm assuming it hasn't been stripped out of Elements yet.)
Anyway...
On PC, press the alt key + I (for Image); the menu will pop up (notice there are underscores under one letter of each command--these only appear if you use the initial shortcut). The E is underlined in Rotate. Press E. The Rotate menu pops up. The C is underlined in Custom. Press C...rotation dialog will pop up.
So Alt + I, then E, then C.
You can also input the number...if you desire changing rotation direction left to right hit TAB key (jumps to next field); then L or R which are underscored for left and right. Hit ENTER to accept or ESC to dismiss.
BTW, This menu navigation works for all the menus. You'll note there are two menus headed by F. The second one Filter will be alt + t.
Why is filter T? F was taken by file, I was taken by image, and L was taken by layers. The Organizer can also be navigated in this manner.
Edit: Some menu items will not have underscores but can still be done this way. They are easy enough to guess since you know they use letters in the word. Example: Unsharp mask. Press alt + T (to open filter menu); then S (for Sharpen); then right arrow key (opens the sharpen submenu); then U (for Unsharp Mask).
If on a mac, I believe you would substitute the opt key for the alt key.

How to make Federated Portal Network Content available in a Consumer Portal

Similar Messages

Maybe you are looking for