How To Make IP Passthrough Work!!

As you all may know theres been a lot of problems with pretty much nobody knowing if IP Passthrough works or not.
I decided to make this for anyone who still uses IP Passthroguh enabled phones. Plus ive not seen a single forum that gives this solution.
TUST ME it works it worked for me perfectly and took me less than 5mins to get it working.
Most of you have try the basics.
Created the access point on the phone.
Install Nokia Network Bridge.
Then gone ahead and tried to connect the phone to the net.
One thing ive noticed that nobody mentioned was you would have to "BRIDGE the networks" yourself.
To do so depends on what type of connection you have.
If you are connecting through a LAN on your computer its pretty simple.
Go to your network conncetions and right click and bridge it with your nokia connection.
If its through a USB Modem then its just as simple really. while the USB Modem (Broadband or Dial-Up) is connceted to the internet go to the Properties menu of the connection.
If youve got a status display in the taskbar with the two computers right click it and choose Status then Properties.
Click on the Advanced tab along the top and there should be 3 little check boxes. Tick the first two.
NOTE: The check boxes are to share your internet connection. Make sure your firewall allows this. Also they dont show up if there not neccesary so keep your phone connected to the PC or Laptop using IP Passthrough so theres a reason for it to be a shared connection.

I would start with the getting started tutorial.
http://www.adobe.com/devnet/livecycle/articles/blazeds_gettingstarted.html
-Alex

Similar Messages

My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

YES! How to make PRINT QUOTAS WORK with 10.4

How to make PRINT QUOTAS WORK in 10.4
After struggling for quite some time, I finally found a pretty simple way to make print quotas work.
First, I’ll tell you our setup. We have 3 different computer centers with a variety of eMacs and new Intel iMacs, all clients are running 10.4.8, and each of those 3 centers has its own HP Laserjet 4200 printer. Our dual G5 server is running Server v.10.4.8. Client computers and printers have static IP addresses. All clients are bound to the server with the standard WorkGroup Manager/ LDAPv3 Directory Access scheme - such that all students login to the clients with their network username/password to mount their home directory on the client.
Next, I’ll tell you what does not work. IF YOU WANT PRINT QUOTAS TO WORK, you cannot use Workgroup Manager to assign a printer to any managed user account, user group, or computer group. Why? Because when you go to a client, and Show Info on the printer that is being pushed by Workgroup Manager, you’ll see that the queue name is not the queue that you’ve setup in Server Admin. Instead, you’ll see the queue name is “MCX” or something along those lines. Even if you manually edit the Workgroup print preference file that is being pushed to clients, it still will not work.
Drawbacks of my technique: In my case, students will see all 3 printers (1 from each lab) available to them no matter which lab they are in. Not the best, but for now I think it’ll be worth it to be able to control wasteful printing. Students may be able to move/delete the preference file (see below), but they’ll only be hurting themselves, as they won’t have any printers at all then.
Okay, here’s how I did it:
1. If you have setup any printers to be pushed out via Workgroup Manager’s preference enforcement to individual users, usergroups, or computer groups, turn those preferences off and leave them off.
2. Delete any existing printers in your Printer Setup Utility and/or Server Admin. Add and setup a new printer queue using the Server Admin> Print service. I added the printer through the Server Admin application, not Printer Setup Utility (may not matter). However, I did go into that latter utility to set the model of the printer. Now, back in Server Admin, edit the printer queue to turn on these services IPP, LPR (bonjour off), and of course check off the enforce quotas box. (No student Windows clients, so I didn’t tinker with SMB print service). I went ahead and specified the standard cover sheet – it will be handy while troubleshooting.
3. In Workgroup Manager, select the users that you want to enforce quotas upon, go to the Printer Quota tab (not the preference pane) and, in my case, I selected All Queues and specified a quota, and clicked Save.
4. Delete all printers that appear in the Printer Setup Utility from each client computer (I know, UGH).
5. For all network users, you need to edit a preference file and put it into each user’s home directory. That file is “com.apple.print.favorites.plist” and as you guessed, it needs to go into the Library> Preferences folder of every one of your network users’ home directories. Now, the content of that file is crucial… what it should show is the name of the queue(s) you created in Server Admin above, and be immediately followed by an “@” and the address of the server that is hosting that queue. For example, my queue’s name is TCStudentQ and the server’s address is student.mydomain.org… so my preference file has this entry: [email protected]. If you have more than one queue, you’ll have more entries. Be sure that the network user has at least Read level access under Group or Others. I’d recommend making the server System account the Owner of the file, and be sure to lock the file so the users can’t easily trash it. If you don’t know how to create this file in the first place, what you can do is go to a client computer, and log into the client with a dummy network account. Then open Printer Setup Utility, and you should see the queue you created in step 2. Add that printer, and then the file will be created in your dummy account’s home directory under Library> Preferences. Now you can use that file to distribute to other user’s folders… but don’t forget that each user needs Read level access.
6. That’s it. Works for me. When they exceed the quota, all that spits out is the cover page. It’d be nice if there was a quota monitor utility on the client side so users can see how many pages they have remaining and when the quota will automatically reset. I plan to start the quota on a Monday morning and go on a weekly duration. Not sure what a good starting point is… perhaps 25 pages every school week.
7. Hey Apple Computer, Inc. Server Developers & Project Managers, I truly hope you’re reading this and can explain why print quotas don’t function as you have documented and advertised. I don’t mean to toot my own horn, but I’ve spent way too much time discovering this workaround, and I know it will help thousands of others with the same problem. I can see where your Print Quota system breaks down, and I think you need to fix these issues or at least document them. Don’t forget to fix serious 10.4 Server bugs before leaving it behind for 10.5 Server – many of us will continue using 10.4 Server for at least another year or two.

David,
Your assumption that I didn't read the documentation is incorrect. I read that 10.4 documentation over and over - followed it to the letter to no avail. Perhaps it was updated in the last few weeks? So, do you have a fully operable printer quota system in conjunction with a managed computer or user group that has a managed printer pushed to the group via Workgroup Manager? I can push a managed printer to a managed group without a problem, but the quotas won't be enforced unless I use the workaround above and cut Workgroup Manager's managed/pushed printer out of the picture.
I know this is a user-to-user forum - however, I'm also aware that Apple tech support often chime in here, so it doesn't hurt to post a message to them in the context of a larger posting about a 'known issue'. I have used the server feedback form... hasn't seemed to me to be very helpful in the past.

How to make my wifi work . I'm using HP PAvilion G series Windows 7

can somebody teach me how to make my wifi work. The guy from the place where i asked them to fix my laptop told me to download drivers from sites. and he gave me a list of drivers. But i lost it.. but then. I have downloaded almost all except for the LAN and WLAN. how do i make my wifi work. help me. thank you very much. i don't know the specific details of the laptop that's why i'm sorry if i provided little information..
i saw someone asking for hardware IDs and this is the only i can post now.
PCI\VEN_1814&DEV_5390&SUBSYS_1636103C&REV_00
PCI\VEN_1814&DEV_5390&SUBSYS_1636103C
PCI\VEN_1814&DEV_5390&CC_028000
PCI\VEN_1814&DEV_5390&CC_0280
thank you!!

I understand you need a wifi driver for your G series notebook.
What is the product number?
NOTE: Do NOT provide the serial number.
What is the hardware ID of the wifi adapter?
Go to start, search for device manager, and open this result.
Expand the network adapters category.
Open the wifi card.
Select the details tab and change the category to Hardware IDs.
Report back the hardware IDs reported for it.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How to make Edge Animation works in HLTM5 Offline? I cache all files, but Edge didn't play.

How to make Edge Animation works in HLTM5 Offline? I cache all files, but Edge didn't play.
Some createJS animation start without any problem.
Thanks!
Astors

Thank you for your answer.
I do use cdn off for publish setting.
The Web site that I am working on is a very complicated site. Edge
animations are in a subdirectory of Apache server.
When server is offline, I get all files from Appcache without problem,
excepted *_EdgePreload.js.
I Google hundreds time, cannot find answer on why this file is always get
online.
Finally, I find out myself, Adobe Edge don’t like relative file path for
*_EdgePreload.js.
Change to root absolute path fixed the problem:
Astors

How to make PDF forms work in DreamWeaver

How to make PDF forms work in Dreamweaver

Look at DW's starter pages called "liquid" (FILE | New > Blank Page > "2 column, liquid" etc., or Google "liquid layouts".

Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

How to make Folder Action work on file, subfolder content change?

Hi!
I looking for information in how to make a Folder Action, Work Flow or any action from Automator to work on file change and not only on deletion, moving or insertion. What I want to know is if it's possible to trigger some script or app while monitoring a folder and its contents, files and subfolders, changes. Meaning that when I have a file that has its contents updated the action will be triggered like an txt file that I only insert a new line in it, for example.
Is there any solution that is not third party? Is there an internal Mac OS X solution that would work on Snow Leopard, Lion and Mountain Lion?

i have same problem. i would like to move automatically saved Word backup copy to another folder, but the folder action doesn't recognize the save as a new file that needs to be acted upon.

How to make Adobe Players work on my ACER 3985,+Windows 8 and AdobePlayer embedded ; no way to make

How to make on my new ACER 3985+ Windows 8 with AdobePlayer embedded , Adobe Player working ; no way to view videoattachments ,although recent version of Adobe Player seems to be installed ...

Can you give us a specific URL that you're having problems with? I'd also recommend taking a minute and reviewing the content in this FAQ:
How do I install Flash Player on Windows 8?
Thanks,
Chris

How to make fullscreen mode work using javascript

1.I want to open the window in fullscreen mode.
It works fine for internet explorer.
But in netscape navigator 8.0 as the tab browsing is there
The menu bar appears on the page.
That i don't want.
2. Also when the window opens in full screen mode and if after that
i press the ctrl+N the new window doesn't open in full screen mode.
Giving the sample code as below.
So how to make it work in full screen mode in both cases.
//The sample code is given
//check.html
<HTML>
<HEAD>
<TITLE> Full Screen </TITLE>
<script type="text/javascript">

</script>
</head>
<body>
<form>
<input type="button" onClick="myPopup()" value="POP!">
</form>
<p onClick="myPopup()">CLICK ME TOO!</p>
</body>
</HTML>Plz help me.
Thanx in Advance.
Reema.

dont try to use a browser for what its not intended to do.
A browser is never been intended to work in fullscreen mode. Trying to control the size a browser is displayed in, is considered bad practice and sites that do it are usually very annoying.

How to make iMovie HD work in OS X.8 - 10

Saw many posts of people asking about how to get it to work with "Rosetta" and I took some hints from there.
Here's what I did:
Right click iMovie HD and Show Package Contents
Go into the Contents folder
Use PList Edit Pro to edit the Info.plist file:
Change "Application requires native environment" to "NO"
Change the following strings:
Get Info string
InfoDictionary version
Bundle versions string, short
Bundle version
for ALL of them, change the current version number to "10.0.6"
File:Save
Use PList Edit Pro to edit the version.plist file:
Change:
CFBundeShortVersionString
CFBundleVersion
for all of them, change the current version number to "10.0.6"
File:Save
That's it, it will now work on the newer OS X versions.

I think I solved my problem by running the following command:
sudo slapconfig -destroyldapserver diradmin
diradmin is the name of the Open Directory admin account I created.
The Open Directory Service now appears "off" and no longer had the green dot next to it in the list of services.
Obviously, NOT a good solution to someone who was actively using Open Directory as this appears to have deleted all the data associated with Open Directory.
Users and Groups now allow me to add/delete/modify.
Sad to see an Apple product have such issues.

How to make operation Average work on base level of a hierarchy?

I used Oracle OLAP 11g Sample Schema OLAPTRAIN to make a test, and found something really confused me a lot.
Here was my steps,
I made a dimension "TIME" with a hierarchy "calendar": all years <- year <- quarter <- month.
And then building up two cubes,
Cube "AVG_TEST" using dimension "TIME" with operator Average.
Cube "SUM_TEST" using dimension "TIME" with operator Sum.
After maintaining both dimension and cubes, I tried to query views: AVG_TEST_VIEW and SUM_TEST_VIEW and noticed the cube value based on months level were same for both of cubes. It was pretty clear that operator Average didn't work at month level within cube "AVG_TEST", but using operator Sum.
Could any one tell me why operator didn't work on the base level of hierarchy, instead of Sum? As I have a requirement to computing average value for day level, but can't add hour level to the dimension because of huge data quantity and the speed of maintaining cube. Is there a way to make operator Average work for the base level of hierarchy?
Any help will be really appreciated!
Satine

Hey Brijesh,
Thank you for your help!
I am still confused with it. Even month is the leaf level of dimension, but the fact data is day level precision, not month, and the value at month level still should be computed with my specified operator Average, not Sum. I mean If it could be computed with Sum (actually the value at month level was sumed up data from fact table), then why couldn't with Average at the leaf level?
My test code is from "Oracle OLAP 11g Sample Schema OLAPTRAIN", and data looks like,
SQL> select * from sales_fact where to_char(day_Key,'yyyy-mm')='2005-04' and rownum=1;
QUANTITY      PRICE      SALES DAY_KEY         PRODUCT    CHANNEL   CUSTOMER
         1        125        125 13-APR-05          5298         21     284846
SQL> select day_key,month_id from times where rownum=1;
DAY_KEY      MONTH_ID
31-JAN-05    JAN2005Cube name is AVG_TEST, the fact data is from sales_fact.sales. From below, it is pretty clear the value at month level was sumed up data even specified Average operator.
SQL> SELECT * FROM AVG_TEST_VIEW where time='APR2005';
       AVG TIME
7849372.89 APR2005
SQL> select sum(sales) from sales_fact where to_char(day_Key,'yyyy-mm')='2005-04';
SUM(SALES)
7849372.89Thanks
Satine

How to make BEX analyzer work in ALV?

Hai,
As we have an export button on alv, it has 2 options : EXCEL & Bex Analyzer.
Export to excel is working fine, but Bex is showing a dump as follows:
The following error text was processed in the system ECD : You can only work in client 000
The error occurred on the application server haasdevecc_ECD_01 and in the work process 0 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
Function: RS_MANDT_CHECK of program SAPLRSMANDT
Form: CLIENT_CHECK of program SAPLRSDG_IOBJ_DB_READ
Function: RSD_IOBJ_INCL_ATR_NAV_GET of program SAPLRSDG_IOBJ_DB_READ
Function: RSD_COB_PRO_GET_ALWAYS of program SAPLRSDI
Method: GET_COB_PRO of program CL_RSR========================CP
Form: INITIALIZE of program SAPLRRSI
Function: RRSI_VAL_SID_SINGLE_CONVERT of program SAPLRRSI
Method: GET_CHANMID of program CL_RSR========================CP
Method: CLASS_CONSTRUCTOR of program CL_RSR========================CP
Method: CREATE_COBPRO_FROM_DDFIELD of program CL_RSROA_BI_QUERY=============CP.
<b>Can anyone help to know what are the requirements to be installed inorder to make Bex analyzer work?
or Disable only bex analyzer and allow excel option?\</b>
Cheers,
Madhu.

Hai,
As we have an export button on alv, it has 2 options : EXCEL & Bex Analyzer.
Export to excel is working fine, but Bex is showing a dump as follows:
The following error text was processed in the system ECD : You can only work in client 000
The error occurred on the application server haasdevecc_ECD_01 and in the work process 0 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
Function: RS_MANDT_CHECK of program SAPLRSMANDT
Form: CLIENT_CHECK of program SAPLRSDG_IOBJ_DB_READ
Function: RSD_IOBJ_INCL_ATR_NAV_GET of program SAPLRSDG_IOBJ_DB_READ
Function: RSD_COB_PRO_GET_ALWAYS of program SAPLRSDI
Method: GET_COB_PRO of program CL_RSR========================CP
Form: INITIALIZE of program SAPLRRSI
Function: RRSI_VAL_SID_SINGLE_CONVERT of program SAPLRRSI
Method: GET_CHANMID of program CL_RSR========================CP
Method: CLASS_CONSTRUCTOR of program CL_RSR========================CP
Method: CREATE_COBPRO_FROM_DDFIELD of program CL_RSROA_BI_QUERY=============CP.
<b>Can anyone help to know what are the requirements to be installed inorder to make Bex analyzer work?
or Disable only bex analyzer and allow excel option?\</b>
Cheers,
Madhu.

E535 - How to make USB stick working again

Hi all!
Recently my E535 does not recognize my USB stick anymore.
Other computers do recognize it, the E535 not.
I already formatted the stick, but that makes not difference to the E535.
The device manager does not show any suspicious device.
The disk manager does not show the stick's partition.
When I stick in the stick, the USB devices icon in the task bar shortly shows up, but then immediately disappears.
Interestigly the Lenovo Solution Center shows up three 'unknown device's.
Does anyone have any idea how to make my E535 accept my USB stick again?
Kind regards,
Gerald
PS:
I have Windows 8.1 Pro installed and up-to-date. Also the DriverToolKit says, that all drivers are up-to-date.
Solved!
Go to Solution.

Hi Gba,
Welcome to Lenovo Community!
As per the query we understood that you are facing issues with USB flash drive not able to detect on your ThinkPad E535.
Go go device manager expand Universal Serial Bus Controllers and uninstall all the adapter from there and restart the system and check it once.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to make this script work

Help me to make this script work, please!
function(){
app.findGrepPreferences.firstLineIndent = "8 mm";
app.findGrepPreferences.leftIndent = "8 mm";
app.changeGrepPreferences.firstLineIndent = "8 mm";
app.changeGrepPreferences.leftIndent = "16 mm";
app.selection[0].changeGrep();
app.findGrepPreferences.leftIndent = "16 mm";
app.changeGrepPreferences.leftIndent = "24 mm";
app.selection[0].changeGrep();

Hi,
Its already replied, see below code:
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.firstLineIndent = "8 mm";
app.findGrepPreferences.leftIndent = "8 mm";
app.changeGrepPreferences.firstLineIndent = "8 mm";
app.changeGrepPreferences.leftIndent = "16 mm";
app.changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
First run the above code, again you want to change leftIndent from '16 mm' to '24 mm' run below code:
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.leftIndent = "16 mm";
app.changeGrepPreferences.leftIndent = "24 mm";
app.changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
by
hasvi

How To Make IP Passthrough Work!!

Similar Messages

Maybe you are looking for