How to make JDev leave out data-sources.xml

Greetings
I would like to have jdeveloper leave out data-sources.xml. I have my test server setup with all the data-sources so this isn't needed. All it does is create bunches of data sources on my server then I go in and delete them.
Is there a way somewhere in jdeveloper or my deploy profiles were I can tell it to leave this file out so it just uses the ones I have already setup on the server?
thanks
troy

I think you can control this by going to tool->Embedded OC4J Preferences->Data sourcesI think the original author meant to ask for a way to exclude data-sources.xml when deploying to an external application server.
So far the only way I've found out to work is to manually blank the 'dataSourcesPath' field in "Configure Application" dialog before actual deployment takes place.

Similar Messages

  • How Get JDev to Omit data-sources.xml from every .war deployment

    I want a global data-sources.xml file to be used for all deployments. I do not want a copy of my standard data-sources.xml file to be included in every single deployment. I want my global data-sources.xml file to reside in the standard J2EE location of:
    oc4j_home/oc4j_instance_name/j2ee/config/data-sources.xml
    JDeveloper, for whatever reason, includes a data-sources.xml into every .war file. How do we configure JDev to omit the data-sources.xml? How do we set up JDev to automatically configure the .xml files (orion-application.xml, application.xml, etc) to use the global data-sources.xml? I do not want to manually do this for every deployment.
    I've been trying hard to find the answer in JDev online help and other OAS manuals. I read everywhere that I can have a "global" data-sources.xml, but I find no way to easily configure JDeveloper to do it this way.
    I would be grateful for you insights/help.
    thanks
    -Paul Janda

    I found the answer:
    In JDeveloper, Go to Tools | Preferences
    Select Deployment
    Uncheck the option for "Bundle default data-sources.xml during deployment"
    Upon the next generation of the .ear or .war file (including the next deployment), data-sources.xml will be omitted.
    -paul janda

  • How to make enhanced fields of data source delta enabled?

    Hi ,
    I have a scenario, in which we are using the DS 0CUSTOMER_ATTR to load the master data.There are some fields added to this data source but this fields are not delta enabled. I have tested these fields from R/3 side using BDCP, CDPOS tables. All the fields are writing the changes correctly. But when extracting them using delta they are not capturing.If we load the full,it is capturing all the changes.
    So running full load every week is taking more time.
    Can any one suggest how to make this fileds delta enabled to capture the change in BW side as well to extract only changed records?
    Any help will be greatly appriciated !
    Thanks & Regards,
    Vishnu

    HI,
    It is not possible to load delta this data. Your datasource only detects changes in the customer table and when any customer has been modified the record is loaded to BW. In this moment the datasource fill the append extructure.
    The problem is that if you modifies some record from the append extructure the datasources doesn't detects the changes. When you does a full load you are filling the append extructure for the entire records and it works.
    If you want to catch this deltas you should make a delta datasource for CDPOS but depending on the number of records of the tables it won't be possible.
    You could check if there is any event to detects the modification and create a delta queue datasource for the append extructure.
    Then, you can mix both datasources in a DSO in BW.
    You can look for a " how to create generic datasources which use delta queue"
    I hope it helps

  • How to make a Infocube as data source and upload data? urgent

    Hi all,
    I have 2 same InfoCubes, and I want to make the test InfoCube(ZCO_1T) as data source and upload data to another Cube(ZCO_1), Now I has Generated Export DataSource on ZCO_1T and create a update rule between ZCO_1T and ZCO_1. what will I do the next step? Thanks.

    hi delve,
    once u generate datasource from test cube it acts as an data source for further upload.
    now u choose update target3.x in additional functions in context menu of the test cube.
    u will get an infopackage pop up with data target to the cube ZCO_1,processing to datatarget only.
    selection criterion can bve selected from the first tab.
    under schedule tab you can start extraction.
    reward points if helpful.

  • How to make a key out of this data?

    Since no one replied to my last post, I'll give it another try. From an RTSP server I get two values, a key called rsaaeskey (342 bytes, without the line breaks):
      yxKBocBgTii20n9nbKfYGyGhPqtosXuq8M99yU5/PzTVNmIUsUGlpD27u
      cqN8eNFvmaO7cFVXeaMGaCfI5V+YNrd77xGQ+CUE0XFraXUvp4cF4aX1L
      ZOGe38nwX3Ba+4bQFfjmYgz3ObRuOWlw9KCi4CMP5574F+CIvutVAwtAC
      PiDFF7nVcoaBTr2QbSUile0Zs3Hyxjn9PWVaey9Nu2DgJZ8rtw6F2SkQ7
      NDHBjjUKXNIeCAeBFuV4XNiazvi3gWa4VbgITtD9jcm+7nPMAK0oBL1S3
      K3Z6FK7XVnfehYYJjRw7THMZzSvq7FtLB9QgulqQTJ3awJdwS0ACb1FkAand an initialization vector called aesiv (22 bytes):
      zcZmAZtqh7uGcEwPXk0QeAThe data is obviously Base64 encoded. However, after decoding I don't know how to make a key out of it. Trying KeyFactory's generatePublic and generatePrivate methods result in an InvalidKeySpecException with any algorithm I've tried (RSA, DSA, DH).
    I think this is a multi-prime RAS secret key (someone said they're 342 bytes long), but how do I generate a Java Key out of it?

    The rsaaeskey, decoded to binary, is a binary array of 256 bytes. Using the DUMPASN1 tool we see that the bytes are not in ASN.1 BER or DER encoding.
    C> openssl enc -base64 -d -in rsaaeskey.base64 -out test.bin
    C> dumpasn1 rsaaeskey.bin
       0 CB   18: [PRIVATE 11]
                :   81 A1 C0 60 4E 28 B6 D2 7F 67 6C A7 D8 1B 21 A1
                :   3E ABIf it were encoded in ASN.1 BER or DER encoding it will start as a "SEQUENCE" or a "SET", not as an unrecognized data.
    You need to check the exact specification of the protocol. (Are you using TSP - RFC 3161, or RTSP - RFC 2326?)

  • Jdev 10.1.2 data-sources.xml weirdness

    Hi, I am using JDeveloper 10.1.2 with all the updates.
    My project is a web service. I'm getting a database connection like this:
    InitialContext ic = new InitialContext();
    DataSource ods = (DataSource) ic.lookup("jdbc/PeopleSoftPooledDS");
    Connection conn = ods.getConnection();I find that I cannot do "Oracle" things with the connection; in debug I find out that its not an Oracle connection. Its com.evermind something. I'm trying to figure out why, and how to get an Oracle driver connection.
    No data-sources.xml files under my jdeveloper install reference the evermind driver now. Yet I'm still getting an evermind connection.
    I can't seem to figure out what is going on
    Dennis S

    The class name is defined as oracle.jdbc.pool.OracleConnectionCacheImpl. The connection driver is defined as oracle.jdbc.driver.OracleDriver.
    By not being able to do "Oracle" things with the connection I mean method calls. I did a stmt.execute() and couldn't do a stmt.getCursor() because stmt wasn't an Oracle object.

  • How to make use of adjacent data elements within the same buffer

    Hi,
             Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
             Here I also attach my VI showing what I did.
        Thank you very much in advance,
                            Suksun
    Attachments:
    wheel_encoder_1.vi ‏98 KB

    Hi Suksun,
          I hope you'll forgive me for distilling your code - mainly to understand it better.  I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array.  As in your code, the last velocity is being paired with the first position.  If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
    cheers
    Message Edited by Dynamik on 01-07-2006 03:17 AM
    Message Edited by Dynamik on 01-07-2006 03:19 AM
    When they give imbeciles handicap-parking, I won't have so far to walk!
    Attachments:
    encoder2.GIF ‏14 KB
    encoder2.vi ‏102 KB

  • How to add a data-source.xml to the project to config DB connections and to be SCM'ed

    I'd like to explicitly manage a data-sources.xml for my JSP + BC4J project.
    Any helps on getting the released Jdev to add a data-source.xml that would then
    be what the .ear deploys to OC4J?
    Thanks, curt

    I have a JSP + BC4J project:
    So far my naive experiments to explicitely add data-sources.xml to a
    project that is picked up by the deploy to .ear step and put in the
    root of the .ear have failed.
    Is this one of those gaps like the orion-application.xml file, that has no
    solution at present?
    Or is the back-door via adding an EJB component to my project, then deleting it??
    Thanks, curt

  • How to make the exchange of data between 2 while loop in real time

    hello
    I have 2 while loop
    the 1st while loop includes the data acquisition program
    the 2nd while loop includes the control program
    my question is how to make the exchange of data between 2 while loop in real time
    I tried with the local variable and direct wiring between the 2 while loop
    it does not work (there is a delay)
    Solved!
    Go to Solution.

    Bilalus,
    Queues are only good to transfer data if your application isn't deterministic. Since you are using Real Time, I am assuming that your application requires determinism. If you are using Timed Loops and you use queues to transfer data between your loops, you are losing determinism. In this case, you need to use the RT FIFO functions. 
    Warm Regards,
    William Fernandez
    Applications Engineering
    National Instruments

  • How to make a snapshot out of a movie file?

    How to make a snapshot out of a movie file and integrate this snapshot into the movie? Thanks, Wolfgang

    Either you use the Hold function from the Retiming popup or you export an image and reimport it.

  • How to make linkage query In Data Model for search

    I want to make an linkage query as a condition for my  report in BI Publisher. how to make the linkage in Date Model ?

    This is the forum for SQL Developer, not for general SQL or PL/SQL questions.
    Please repost this in the SQL and PL/SQL forum.

  • For a function module how can I find its assigned data source name?

    Hi BW Gurus,
    If i know the data source name then the  assigned fn. module/Table/Infoset I could find from RSO2. But for function module How do I know its assigned data source name?
    Thanks a lot for the response.
    Regards
    Ven

    Hi Ram,
    In SE16, enter the table name as ROOSOURCE and in contents choose field EXTRACTOR for selection and enter the name of the function module.
    It will return the list of datasources where the function module has been used.
    Best Regards,
    Ankit Agrawal

  • How to make JDev aware of the xmldb API

    Hi everybody,
    I am a real beginner in Jdev, and I have to develop a
    Java Application using Oracle Java developer, against
    an XML-native database called eXist. I'll have to use
    a java API called xmldb supported by eXist in order to
    interact with the database. Although I have basic
    knowloedge in Object-oriented programming, but I don't
    know where to begin, especially how to make JDev aware
    of the xmldb API, and how to create classical
    application components (Windows, buttons, etc).
    Could you help me with some orientations and
    interesting links?.
    Thanks a lot.
    Mounir.

    Hi,
    don't know this database, but the database vendor should be able to explain how his DB is accessed from Java. If this requires libraries, then the vendor will provide these in JAR files, which you then configure with JDeveloper (as a custom library Tools --> Manage Libraries) or in the Project
    If there is a JDB driver for it, even better. This however is not a deliverable of JDeveloper but the database vendor
    Frank

  • How to get group when the data source from system instead of UME database

    Hig guys,
    How to get group when the data source comes from backend system instead of UME database?
    I tried to use
    IUMPrincipal RefGroup = WPUMFactory.getGroupFactory().getGroup(groupName);
    But I was not able to get the group. But in "UserAdministrator", I can find this groupName.
    Which kind of API can I use?
    Thanks in advance!
    Regards,
    Liying
    Message was edited by:
            Liying Wang

    Ok,
    try this:
    com.sapportals.portal.security.usermanagement.IGroupFactory ep5GroupFactory = userManagementService.getGroupFactory();
    IGroupFactory groupFactory = UMFactory.getGroupFactory();
    com.sap.security.api.IGroup group = groupFactory.getGroupByUniqueName(groupName);
    IUMPrincipal ep5Principal = ep5GroupFactory.getEP5Group(group);
    This should do the trick,
    Romano
    PS: and thanks for the stars!

  • How to prevent data-sources.xml from being included in EAR

    I cannot get rid of the data-sources.xml file in my EAR file in the meta-inf folder.
    Deselecting the "Bundle Default data-sources.xml during deployment" in my preferences didn't have any effect. I also tried shutting down/restarting JDeveloper just in case it was cached.
    I also tried adding an exclude filter for data-sources.xml in my deploy profile for both Web files and WEB-INF/classes.

    The way I resolved this was to create the data-sources.xml, right click it, select Properties then uncheck Auto-update data sources.xml. That way it stays empty (hopefully).

Maybe you are looking for

  • Archiving Objects in SAP Retail (transaction SARA)

    Hi All. I have problem with archiving object WS_ACSITE in SAP RETAIL.(Transaction SARA) When I write data archiving, message appeard is that archive sessions are created. When I try to execute the next step: delete - the archive sessions are not appe

  • Third Party Sales Order in COPA - adjusted cost

    We have a third party sales order which creates the Preq and then the pruchase order. We have statistical conditions on the purchase order. We have switched the billing relavency on the item category TAS to a B to allow billing before the invoice rec

  • Hebrew language support

    How can I add Hebrew language support for iPhone?

  • Problems in importing MDL File

    Hello, I want to import MDL file into OWB repository using ombplus. But I want to import only selective objects. I see that there is an option in UI to import selective objects. But I couldnot find any ombplus option. Please help. Thanks Madhavi

  • Add to the last row, even if I add a row?

    I have a spreadsheet for my business with 3 rows: Credit, Debit, and Total.  I want the Total column of each row to take the total from the row above, subtract the debit and add the credit and give me the new number.  I currently do this with J7−H8+I