How to make more than one partition on Airport Time Capsule?

how to make more than one partition on Airport Time Capsule?

Only for the very brave......
Open up the Time Capsule (voids the warranty)
Pull the hard drive
Place the hard drive in a separate enclosure
Connect the enclosure directly to your Mac
Use Disk Utility to partition the hard drive
Reinstall the hard drive back in the Time Capsule
For the rest of us.....
The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
Open up Macintosh HD > Applications > Utilities > Disk Utility
Click on the New Image tab
Navigate to the Time Capsule
Set up the disk image by naming it and specifying how much space you want to reserve

Similar Messages

How to make more than one person can access the database at one time

how to make more than one person can access the database at one time

Please post further f'up's in the Access forum.
In short: for different reasons it is best practice that each user gets its own local copy of the database. This means that you need to split it into a front-end which only consists of the forms, queries, reports etc. Everything which doesn't need to be
shared. And a back-end, which only stores the data.
Take also a look at Allen Browne's article:
Split your Access database into data and application.
When you've splitted your database, you may often consider to use SQL Server as back-end. Here you may read Armen Stein's
The Best of Both Worlds: Access-SQL Server Optimization.

Connect more than one computer to a time capsule volume?

Hello. I am considering buying an old time capsule (500G, 2nd generation) as a little in-house server to store data that need to be accessible for more than one work station. Is it possible to connect more than one work station to one time capsule?
Thanks

While it is possible to connect more than one computer to the Time Capsule......I would not recommend that you buy the Time Capsule that you are looking at.....unless you know that the owner has replaced the hard drive and power supply.
Most of these models never made it much past a few years of operation, so if this is an "original", you have a hint of what will happen not long after you purchase the product.

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

How to RECORD more than ONE TRACK at a time ? ? ?

I have looked, read and tried - but cannot enable more than one track at a time... How do you do it?
I am using a Lexicon Omega USB interface. With two mics plugged in to it, I am able to assign MIC 1 to a track, and MIC 2 onto a different track. However, cannot get BOTH tracks to go "live" at the same time.
Thanx: Stacey

"basic track" is a short cut. whenever i explain something to someone recording an audio instrument i always tell them to create s New Basic Track. it's simple, to the point, has no effects on it (and you can add those later, anyway, the BEST way to do it)
however, either would not cause the issues you're dealing with at the moment, both are valid. Basic just skips a step.

How to delete more than one photo at a time

Apparently there is no longer an iPhoto trash. So you don't drag photos to the trash. Instead you hit the delete key and then a second click on delete when you get the message "Are you sure you want to delete this photo." Has anyone found a way to delete more than one photo at a time, though? This is really a hassle if you have just imported 500 photos and are going to end up deleting 450 of them.

I didn't say use the command key and delete. I use the command key for selecting random photos. Then I right click and choose delete from the contextual menu.
I always use right click, but the command-delete does work also in that album.
Depending on what album you are in, there are different menus. In a user created album, the right click would show "Remove from Album" & "Delete Photo". I noticed that was the same for Last Import Album. But at the same time, under image, you will only have Remove from Album. If it is a system album, you will only get the delete menu from either the right click or from the menu under Image.
What you have to remember is if it days delete the photo, it will completely delete it from the library and all albums. If the menu says Remove From Album, then it will only be removed from the album you are in.
In PhotoStream Album, you get only Delete Photo from the right click menu, but under image, you get only remove from album. So if you want to remove an image from PhotoStream, you have to use the top menu so it won't get deleted from the library. If you want to remove a photo completely, you would use delete and it will be removed from the library and photo stream.
So, there are different processes for the different albums. I don't know if that is intentional or just oversight. That may change in the future.

How to make more than one tab on safari

How do you have more than one tab on sarfari?

Create another from the File menu or by pressing Command and T.
(63155)

How to view more than one file at a time in CS4?

With OS 10.5, and a brand new CS4 Photoshop, I can open many Photoshop files at a time, but can only view one at a time. Must choose one at a time from the "tab". I need to have more than one picture open and showing at a time to work on them. How can I do that? What have I missed? Who can help? Thanks!

"Here's the smart way for all of you on macs. Set up Exposé and a keystroke for 'Application windows'. Then with the press of a single key you can visualize, and swap between documents very easily. By I single keystroke I mean something like Right Control.
Tabbed documents have hardly any genuine advantages for mac users, yet another example of interface decisions in the stupid direction."
This is what I've been saying since I first saw the tabbed view in the new CS4. On the Mac, tabbed view is a big step backwards as it actually breaks the superior Expose' method of viewing multiple windows and also switching among them. I would also add that Control/Tab for non-tabbed windows is actually slightly faster than when they are tabbed. So for the mac, I only needed a minute to decide that the tabbed view was merely change for the sake of change. There are also operations that I do where I have to recreate a piece of art to match an existing piece. In those situations I always have the original right next to the the new image. Tabbed view destroys this as well. So I don't use it.
For the PC, tabbed views is possibly a tiny step forward, but it's such a small step that I'm not sure if I prefer to use tabs, or have that small amount of screen space that the tabs use. There was no previously existing "good" method of viewing and moving among multiple windows of a single application on the PC and therefore, tabs might be a small improvement. Unfortunately though it does seem that in order to bring us tabbed views in CS4, Adobe had to slightly 'break' the regular floating windows view. On the PC the documents will actually float above the toolbars, palettes,etc making it very difficult to use if not impossible. So, if you don't like using tabs, then you are really gonna suffer with non-tabbed view or suffer with the tabbed view. On the Mac, it's the opposite problem. Documents actually float up and underneath the top toolbar, covering the "close, maximize, minimize" buttons. Generally I would say that Adobe has created a mess when the best solution was obvious. Adobe should have copied the expose' method for it's CS4 suite. Hopefully they will have enough feedback with CS4 to see the light and change it for CS5. I see that Microsoft has mouse software that has already done just that on the PC, and there are a handful of independent efforts attempting to come up with something like expose' but generally with far less elegant and less "perfect" results.

Permissions Manager - how to "forget" more than one site at a time

The Firefox Permissions Manager allow a user to "Forget About This Site" one site at a time -- but that is not a practical way to Forget hundreds or thousands of sites listed in Permissions Manager. Is there a way to select multiple sites to Forget, or to batch-Forget sites, or to Forget all sites?
Thanks.

The permissions.sqlite file stores 'allow' and 'block' exceptions for cookies, images, pop-up windows, and extensions (software) installation.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox

How to make more than one version in XCode?

So i have already created an app and summited version 1.0 to the app store it was approved and is now live on the app store. I also have created version 1.1 with minor improvments and released that one with an update as well and is also now live. My question is when I was working on version 1.1 I couldnt really find a way to make it so that i could keep version 1.0 while working on 1.1 and at any time be able to go back to 1.0, basicly like creating a new file inside the project.

That is what git and SCM are for. It is not really something that I can explain in 3 steps though.
I'm not the master of git, so I will refer you to someone who knows more: https://www.atlassian.com/git/tutorial/git-basics
There are many such instructions and tutorials, but that is what you want.

How to make more than one home tab?

On all the windows based browsers, you can type all your home page addresses in or press set current and all the tabs open will now be your home pages. I got firefox for mac to open all my tabs, but I need to do the same for safari.

You might check out this thread. Hope this helps.

How to Insert more than one record at a time- with fixed set of values in one field

Can someone guide as to how to insert multiple records at a time using ASP VBScript in Dreamweaver CS4 or ADDT.
If someone can guide then the exact problem is given below.
I have a MS access database with one table. The table has three fields. The first field is an autonumber field for ID number.
The second field contains string values- One out of 7 predefined values. One set of records consists of 7 records containing all the seven types of predefined values in fields no 1.
The third field is a numeric field and can contain integers.
I want that the user can enter data for the table using an ASP form in such a way that he enters one set of records at a time in one single screen. This way he will not have to remember that he has /has not entered all the seven set of values for the field no 1.
I am not creating fields with the 7 types of field1value as their names as it will increase the number of fields drastically.
Please help for dreamweaver ASP VBScript.

I have successfully inserted seven records in one form submit operation by looping through the command object execute method.
However, the data that is being inserted by the command object is repetition of the first record and the command object is not taking any data from the text boxes for the second record onwards. In this I had used the isert record behavious generated by DW CS4 and modified it to suit my requirement. However, the data inserted in the first row is getting repeated in all the seven rows.
Please help.
Also advise if there are any free dreamweaver server side validation extensions available.

How to Insert more than one record at a time

How to insert multiple records at a time?
If someone can advise on this, then the actual problem is described below:
I have a MS access database with one table. The table has three fields. The
first field is an autonumber field for ID number.
The second field contains string values- One out of 7 predefined values. One
set of records consists of 7 records containing all the seven types of
predefined values in fields no 1.
The third field is a numeric field and can contain integers.
I want that the user can enter data for the table using an ASP form in such
a way that he enters one set of records at a time in one single screen. This
way he will not have to remember that he has /has not entered all the seven
set of values for the field no 1.
I am not creating fields with the 7 types of field1value as their names as
it will increase the number of fields drastically.
Please help with inserting multiple records at a time.

I have successfully inserted seven records in one form submit operation by looping through the command object execute method.
However, the data that is being inserted by the command object is repetition of the first record and the command object is not taking any data from the text boxes for the second record onwards. In this I had used the isert record behavious generated by DW CS4 and modified it to suit my requirement. However, the data inserted in the first row is getting repeated in all the seven rows.
Please help.
Also advise if there are any free dreamweaver server side validation extensions available.

PRINTING: How to print more than one email at a time?

Is it not possible to simply select 10 different emails and send them to the print queue?
I've been searching for hours now and the closest thing I've found is an Automator action that allows users to condense several emails into one (and print from there). This doesn't work for me as I have several receipt emails that shouldn't be combined. Is my only option, seriously, to sit there, one by one, and open > print > close, open > print > close.
There HAS to be a better way than that. Can anyone help?
Thanks,
David

OK - try this: Do what advanced user said (⌘-select multiple messages) and print to PDF someplace convenient like your Desktop. Highlight/select all newly created PDF icons. Open all simultaneously with Preview (Right-click Open With if you have another default application for PDF, or just right-click Open if Preview is your default PDF application). This displays the multiple documents inside a single window, each accessible by clicking on the appropriate document icon in the sidebar, at least, apparently, that is the default behavior on mine unless you have changed that behavior in Preview Preferences General.
Simultaneously select/drag all the second to last document icons displayed in the document sidebar and drag&drop them on top of the first document icon. "Save as" to whatever. Quit Preview. You now have a multi-page PDF of all those individual PDFs that you started out with.

Make more than one pdf at a time

I am using Bi Publisher with Apex to make a pdf. I have a query that uses a template I created using the bi Piblisher / word add on.
I can create a button in Apex and run the report. Now I would like to run 5 different query/template/pdf's all at the same time and not have them
appear on the screen but just generate them and have them put at one directory location. Can I do this.
Thanks,
Doug

What has changed (a few versions of Reader ago) is that instead of each PDF opening in a part of one window, Reader opens a separate window for each. (A lot of people don't like this, but it's the way Microsoft recommended at that time).
Now, each of these PDFs-in-a-window can fill the screen, or can be smaller. You can use Window > Tile for example, or resize so you have a bit of an overlap. You should also be able to choose between the different windows right in the task bar by holding down the mouse on the Adobe Reader icon.

How to make more than one partition on Airport Time Capsule?

Similar Messages

Maybe you are looking for