How to make my phone read text out loud

finally got a smart phone and I can't get it to do the best thing my old dumb phone did. I want it to read incoming texts out loud. I've turned driving mode on and all it does is announce that I have a text but it won't read it to me. Help!

if you use s voice when you get the message you can get the phone to read you the message you start s voice and say read message

Similar Messages

LG Cosmos 2 Text Message - my phone has started reading texts out loud, how do I turn this off?

Obviously one of my settings got changed but, for the life of me, I can't figure out how to turn this off. Can someone help me go back to silent text messaging please?

kymberlaine, I understand your frustration with this feature and I would check the voice command feature on your phone. Please let us know if this resolves your issue.
1. From standby mode, press[MENU].
2. Press Settings & Tools.
3. Press Tools.
4. Press Voice Commands.
Note: The Voice Commands feature has several settings which allow you to customize how you want to use it. Access Voice Commands, then press the Right Soft Key [Settings]. You will have fiver choices, you will need to choose the "Prompts" menus option to change.
1) Confirm Choices: Automatic/Always Confirm/ Never Confirm
2) Sensitivity; Adjust the sensitivity as More Sensitive / Automatic/ Less Sensitive.
3) Adapt Voice; If the phone asks you to repeat your voice command too often, train the phone to recognize your voice patterns. -Choose from Words/ Train Digits
4)Prompts Mode: Prompts / Readout + Alerts/ Readout / Tones Only Audio Playback: Speaker phone /Earpiece Timeout: 5 seconds / 10 seconds
5) CLR Key Activation: On/ Off

How to make add the program system.out messages to a applet text field?

How to make add the program system.out messages to a applet text field?
System.out.println("I wanna displany this message on a applet text field, thanks");

You may wish to change the output destination to a JTextArea. Please have a look at this link that likely shows what you want:
[http://forums.sun.com/thread.jspa?forumID=54&threadID=640376|http://forums.sun.com/thread.jspa?forumID=54&threadID=640376]
If you need other examples, search the forum. I found the search terms -- redirect system out textarea -- very helpful.
Good luck

How to make preflight profile witch find out if exist in document spot color with name "CutContour", if not show allert, I try many combinations but nothing works

How to make preflight profile witch find out if exist in document spot color with name "CutContour", if not show allert, I try many combinations but nothing works

Thanks very much for your help, but I'm still overlooking something. I double checked to make sure that I did not have a hidden .txt file extention. I then decided to abandon the lock on preferences idea until I get it working. I converted my mozilla.cfg file back to plain text. I made sure I do not have an extra blank line at the end of each file. The syntax looks good, as far as I can tell. I'll copy and paste what I have so far. Did I have the file locations correct posted above? Also, if you feel i can delete some lines of text in my mozilla.cfg file I'll be happy to do so.
mozilla.cfg
<pre><nowiki>//
pref("privacy.sanitize.sanitizeOnShutdown", true);
pref("privacy.sanitize.promptOnSanitize", false);
pref("browser.rights.override", true);
pref(“app.update.auto”, false);
pref(“extensions.blocklist.enabled”, false);
pref(“extensions.shownselectionUI”, true);
pref(“browser.shell.checkDefaultBrowser”, false);
pref(“toolkit.telemetry.enabled”, false);
pref(“toolkit.telemetry.prompted”, 2);
pref(“toolkit.telemetry.rejected”, true);
pref(“app.update.auto”, false);
pref(“browser.download.useDownloadDir”, true);
pref(“browser.search.update”, false);
pref(“signon.autofillForms”, false);
pref(“signon.rememberSignons”, false);
pref(“browser.download.manager.scanWhenDone”, true);
pref(“browser.formfill.enable”, false);
pref(“xpinstall.enabled”, true);</nowiki></pre>
channel-prefs.js
pref("app.update.channel", "release");
override.ini
[XRE]
EnableProfileMigrator=false
all-lmc.js
pref("general.config.filename", "mozilla.cfg");
defaultPref("browser.startup.homepage", "data:text/plain,browser.startup.homepage=http://bbc.co.uk");
Again, thank you very much for your time. Do I create my own browserconfig.properties, and firefox.js? Also, I forgot to mention I'm running Windows 8.

I don´t know how to make a phone call whit my ipad...and how to sent a message? is it possible?

i don´t know how to make a phone call whit my ipad...and how to senSeleneGMt a message? What do i need? or is it impossible?

You can't; not natively, anyway, since the iPad is not a phone. If you want to make a call, you'll need to use some third-party Voice-Over-IP service such as Skype.
I'm not sure what you're asking when you ask about sending a message. If you mean a text message, you can either use iMessage, which can send messages to other users also running iMessage, or you can look in the iTunes Store for SMS apps, a few of which are available. They use separate services to actually send the message and so require an Internet connection, either WiFi or 3G.
Regards.

How to make links in dynamic text?

Hi All,
I need to know how to make links in dynamic text. I have
created a
table to hold the dynamic copy, and the copy is added through
a CMS page
that I created. This Admin page is accessed through a
browser, and I
don't know how to attach a link to selected text within a
browser. Can
anyone point the way? It's probably so easy I'll feel dumb.
Thanks,
Brett

"Brett" <[email protected]> wrote in message
news:fpf7j6$23m$[email protected]..
> Thanks Hunter,
>
> Yes, I suppose a legend on the admin page would provide
a solution. And
> ultimately, if the client doesn't feel confident doing
writing the HTML
> they would have to pay me to do it for them. OK, that
works for me.
The only other thing might be to use something like FCK (or
one of the many
others... ContentSeed, I think is one Murray mentions often)
for the CMS,
that would give an easier option for the end user. WebAssist
has an
FCK-based plug-in called iRite that can give a more
wordprocessing-like feel
to the field (i.e., they could just highlight the text and
then click a
button to add the link).

HT1688 i have an i phone 4s. i have tried everything i know to do but cant get the phone to ring out loud when i recieve a call or message. any ideas on how to fix this?

I have an i phone 4s I have tried everything i know to do, but cant get the phone to ring out loud when i recieve a call or message. Any ideas on how to fix this?

Flip the ring/silent switch on the left side of the phone from silent (red showing) to ring position.

How to make i phone 4s to give a busy signal rather hold and answer?

how to make i phone 4s to give a busy signal rather hold and answer?

Sorry, I ment how to make i phone 4s to give a busy signal rather hold and answer when a second call comes in?

How to make numbers in message text input fields left aligned?

Hi Friends
I have completed one of my task .but getting result right side of the field.
how to make numbers in message text input fields left aligned?
Thanks
Aravinda

Hi ,
Sorry for late replay i am trying this alos not set that page....
pageContext.forwardImmediatelyToCurrentPage(null, true, null);
and one more that kff field working is fine for ex display any text pled displayed properly and only problem is not set the value and HrSitKeyFlex6 and HrSitKeyFlex7 fields are perfectly get the values but not pront HrSitKeyFlex8 that only my issue....
Regards,
Srini

How to make images fade in and out

how to make images fade in and out continuously

HI,
The Ken Burns effects can do this nicely. Available in the iLife suite of software.
iLife 06 minimum requirements:
http://support.apple.com/kb/HT2675
iLife 06 - Amazon
Carolyn

How to make the phone's battery last longer ?

Hi everyone,
i am wondering if there is any difference when the battery is fully desharged thus the phone swithes off , and then you plug it into the power outlet to be charged.
or if it is not fully decharged, and it has some one or two battery bars on the upper right corner of the display, and you set it to be charged, is there any signifficant difference between these two states ?
is there any official or technical advice on "How to make the phone's battery last longer " ??
thanks in advance.

It depends on the battery.
Charging the battery when there is some power in it is especially bad for NiMH batteries. The loss of power is called "memory effect" - battery "remembers" that it does not get fully utilized and over time starts supplying less power.
But new Nokias come with Li-Ion or Li-Polymer and the effect on these being charged when there is still power in them is negligible. Especially for the Li-Polymer ones.
See here about batteries and "memory effect":
http://en.wikipedia.org/wiki/Battery_%28electricity%29#Life_of_rechargeable_batteries
http://en.wikipedia.org/wiki/Memory_effect
Here's more info on types of batteries:
http://en.wikipedia.org/wiki/Li-Ion
http://en.wikipedia.org/wiki/Lithium_polymer_cell
Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
If I've helped, use the Kudos button to thank

How to make a query to list out Journal voucher that hasn't been posted

Hi, do you know how to make a query to list out Journal voucher that hasn't been posted?
By what code name identify that?
Thanks.
Raymond
Edited by: Rui Pereira on Aug 6, 2008 3:57 PM

jack,
there is no link with OBTD to OJDT and JDT1.
voucher number in obdt is different,
after posting voucher is saved as journal entry seperate
number is generated.
you can link OACT,OCRD WITH OJDT,JDT1.
Jeyakanthan

HOW TO MAKE FIELDS AS READ ONLY IN TABLE MAINTAINANCE

HI ABAPers,
HOW TO MAKE SOME FIELDS AS DISPLAY MODE.
FOR SUPPOSE, THERE ARE 5 FIELDS in SM30.
AMONG THEM 1 FIELD SHUD BE USED FOR EDITING AND THE OTHER 4 FIELDS SHUD ONLY BE USED FOR DISPLAY PURPOSE
WHEN EVER I ENTER A VALUE IN THAT 1 PARTICULAR FIELD THEN THE DATA OF THE REMAINING 4 FIELDS SHUD BE DISPLAYED IN THE SAME SCREEN ITSELF.
HOW CAN IT BE POSSIBLE...
PLZ HELP.
THNX IN ADV,
SP.

Hello SP,
You can create a maintenance view for the table & here you can define the maintenance attribute for individual fields.
For the fields you want to be READ-ONLY pass 'R' to those fields. (It is the 4th column from the left, the one to the immediate left of the Key column).
Don't change the TMG function group directly. If you regenerate the TMG the changes would be overwritten !
You can use the Event '01' to fulfill your requirement:
*&      Form f_event_01
*       text
FORM f_event_01.
DATA: v_indx TYPE sy-index,
        v_land1 TYPE land1,
        v_name1 TYPE name1.
FIELD-SYMBOLS: <vendor> TYPE lifnr,
                 <val> TYPE ANY.
BREAK-POINT.
"TOTAL contains all data which are read, changed and created in TMG
LOOP AT total.
    IF <action> = neuer_eintrag " New Entry.
    OR <action> = aendern "Changed entry
    OR <action> = original. "Same as DB
      READ TABLE extract WITH KEY <vim_xtotal_key>.
      IF sy-subrc = 0.
        v_indx = sy-tabix.
      ELSE.
        CLEAR v_indx.
      ENDIF.
      ASSIGN COMPONENT 'LIFNR' OF STRUCTURE total TO <vendor>.
      CHECK sy-subrc = 0.
*     select data from the LFA1 based on LIFNR
      SELECT SINGLE name1 land1 FROM lfa1
        INTO (v_name1,v_land1)
        WHERE lifnr = <vendor>.
      CHECK sy-subrc = 0.
*     Populate the hidden fields NAME1 & LAND1
      ASSIGN COMPONENT 'NAME1' OF STRUCTURE total TO <val>.
      CHECK sy-subrc = 0.
      <val> = v_name1.
      ASSIGN COMPONENT 'LAND1' OF STRUCTURE total TO <val>.
      CHECK sy-subrc = 0.
      <val> = v_land1.
      MODIFY total.
      CHECK v_indx GT 0.
      extract = total. "Pass the changes in TOTAL to EXTRACT
      MODIFY extract INDEX v_indx.
    ENDIF.
ENDLOOP.
sy-subrc = 0.
ENDFORM.                                                    "f_event_01
BR,
Suhas
Edited by: Suhas Saha on Aug 16, 2010 11:58 AM

Reading texts out in blue tooth

I am a pretty smart girl and I THINK I have tried everything with this phone but I cannot get it to read my text messages out loud in my blue tooth. Got a new Jabra Clear bluetooth and it plays music from my phone beautifully. BUT I cannot get it to read my text messages. It may be a blue tooth problem, I am not sure at this point, waiting to hear from Jabra. Any input you all can give me would be awesome.
Thanks!

Just found out from Ford Company the Iphone needs to support MAP message access file

How to make a page read only

Hi all,
Can anyone please help me out on the following issue.
How to make a total page read only, so that he/she can not make any changes. I want the total page read only.
Do we have any functions to do that?
I need to do through peoplecode only because i have to check a condition.
Please help me.
Thank you,
Bye.

Without customizing, this may be accomplished via Permission List Security.
Go to PeopleTools - Security - Permission List
Select the desired Permission List. Click on the Pages tab.
Find the menu and click on "Edit Components" hyperlink.
Find the Component on the List and click on the "Edit Pages" hyperlink.
Click on the Display Only check box for each page in the component you wish Display Only.
If that does not sufice, you may use PeopleCode to set the Field DisplayOnly property to true for those editable fields that you wish not to be.
HTH
Steven E. Davies

How to make my phone read text out loud

Similar Messages

Maybe you are looking for