How to make screens cycle through like a slide show.

I need to have about ten screens (with hypertrends and whatnot) cycle through like a slide show.
I figured i'd use a pulse timer...aaaaand some if then statements...Hmmm......Help me out!!!
Old Fart once said "You can't polish a turd."
Thnx dad...

I got it...
Made a FlipFlop with a F1 key input
Made a PulseTimer with the FlipFlop for on/off, Time period of 0, and duration of 0:10
Made a counter with the PulseTimer as count and for reset i did counter=11 (for ten screens)
Made expresions that read counter=1 ~ counter=10 for each screen
Conected each screens Maximize to an expression.

Similar Messages

PSE6 - How to make a full HD (1920x1080) TV slide show

I have a full HD TV (1920x1080, PAL).
How to make a slide show (wmv) with that resolution in PSE6.
Under "Send to TV" the option Widescreen High Definition (1280x720) is the best resolution.
Under "Save as a File" High (800x600) and DVD PAL (720x576) have the best resolution.
Thanks
Hagen

Hagen Dufner
These profile are for writing the .wmv file and are therefore found (as cited) going the "Save As A File" route. You are not going to access them via "Send to Premiere Elements" since no writing to wmv is involved there.
I too downloaded the WMEncoder 9. When I go the route cited down to tv_profiles and open that and when I click on one of the profiles, it now opens in the WMEncoder 9 Editor (Utilities). So you get an idea of what is required for what exists and edit one of these exiting profiles.
As I said, Photoshop Elements 6 already has a profile for 720p. I am in the process of trying to generate one for 1080i which will give me this option for exporting a wmv slideshow from Photoshop Elements 6 to Premiere Elements 4.
As I see it Premiere Elements 4 has project presets for HD 720p and 1080i. found in Setup via the program's Welcome Screen. As for Export of the project on the Timeline, you can:
Burn to Blu-Ray Disc, MPEG2 1080i NTSC Dolby or MPEG2 1080i PAL Dolby.
If you use Export/Personal Computer, both the MPEG and Windows Media formats have Presets for 730p and 1080i.
So it is not clear what profile you want to create in Premiere Elements 4. Right now Premiere Elements supports only 730p and 1080i. My work is still in progress, and at this time I do not know (a) if Premiere Elements 4 will support a 1080p profile if created (b) where such a file would go in Premiere Elements 4.
To be continued....

Is it possible to make a text box cycle/rotate through text, like a slide show does?

Is it possible to make a text box cycle through 3 or 4 separate pieces/groups of text, like a slide show does with photos? So that when I open my site a text area says "Statement 1", then 10 seconds later it changes to "Statement 2", then 10 seconds later it chagnes to "Statement 3", etc.
Its that possible with a text box? My desire is to have 3 or 4 testimonials that change every 10 seconds.
You can see that right now it's a single testimonial:
www.kmlstudio.com
All help is appreciated
Thanks!
Kevin

Right. Some plugins have zip file downloads while others are just copy & paste.
In DW, go to File > New > Blank page > JavaScript.
Copy & paste the Cycle plugin code into your new JS page.
SaveAs cycle.2.9.81.js in whichever site folder you normally keep scripts.
Link your HTML page to your new cycle script:
Insert > Script > Script (browse to folder containing your cycle script). Hit OK.
Don't forget to add a link to the jQuery core library, too. Plugins don't work without it.
Nancy O.

How to make screen resolution independent in BDC

How to make screen resolution independent in BDC

hi
good
You need to use the CTU_PARAM structure alon with the call transaction statment.
**Sturcture of CTU_PARAM
**DISMODE : Display mode (like the MODE addition 'A' , 'E', 'N')
**UPDMODE: Update mode (like the UPDATE addition 'S', 'A')
**DEFSIZE : Use default window size (Here we are handling those transaction by giving default window size)
**RACOMMIT: Do not end transaction at COMMIT WORK
**NOBINPT : No batch input mode (that is, SY-BINPT = SPACE)
**NOBIEND : No batch input mode after the end of BDC data.
*The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
DATA : L_OPTION TYPE CTU_PARAMS, "Parameter string for runtime of CALL TRANSACTION
L_SUBRC TYPE SYSUBRC.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01' "FK01-Vendor master creation
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
thanks
mrutyun^

How to make a rubber effect like when you swipe between apps using 4 fingers on iPad ?

Hey guys,
So how to make a rubber effect like when you swipe between apps (first or last app) using 4 fingers on iPad iOS7 ? Any examples ?
Thanks!
Ivan

Please do not double post the same question.
Just like I said before. Animate X scale and position. Set the anchor point of the left image to the left side. You can then use an expression or just generate keyframes for scale. When you flip to the next screen then animate position. Easy basic animation except for the bounce. Key framing the bounce so that it looks natural takes a lot of experience or an expression.
Google bounce expression after effects and find this. http://www.motion-graphics-exchange.com/after-effects/Wiggle-rubber-bounce-throw-inertia-e xpressions/4ad0f32a944ad
There are a bunch of other solutions.
There is no single click solution to this problem and it is not an effect, it is an animation.

Cooking with iPad how to make screen stay on longer

Cooking with iPad how to make screen stay on longer

Try, settings - General - Auto Lock. Set to your preferred time.
Stedman

How to make a presentation just like adobe has?

Im looking for some solution how to make presentation not
just with powerpoint slides + video + audio + screencasts with
captivate, but something.
I want to make online presentation or video just like adobe
does which all adobes products has (like
http://www.adobe.com/products/presenter/
What software should i use?

Excelente Oportunidad de Trabajo en Casa por Internet.
Brindamos Capacitacion y Apoyo permanente, Web y Licencia
Internacional. Horario Libre
Ingresos aproximados más de 5,000 dólares
mensuales.
http://www.trabaja-en-casa.com

TS1702 I cannot get an unlocked version of drivesafe.ly to operate on any accounts on my iphone 4S and have had no help when I asked them for support. I am now trying to figure out how to refund the product. Anyone know how to make that request through

I cannot get an unlocked version of drivesafe.ly to operate on any accounts on my iphone 4S and have had no help when I asked them for support. I am now trying to figure out how to refund the product. Anyone know how to make that request through itunes?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Can you automate an iPad keynote presentation like a slide show?

I have a very basic keynote presentation that I've created on my iPad 2. No fancy transitions, etc. Essentially slides with pictures and information. I need to have it run like a slide show and repeat itself over and over for a static display. Can someone help me accomplish this?
Thanks in advance.

Yes, you will do it by setting the transition options for the slides.
See how to do it here http://http://support.apple.com/kb/HT3701

Can any one out there tell me how to insert a zoom tool into my slide show in dreamweaver CS5.5

Hi there
Can any one out there tell me how to insert a zoom tool into my slide show in dreamweaver CS5.5
My slide show consists of lots of thumb nails of paintings under a large painting.
When the small painting thumb nail is clicked the large painting appears.
I would like to be able to enlarge all areas of the large painting when a zoom tool is placed over areas of the large painting.
Really appreciate any one help.

Here's the Dreamweaver forum...
http://forums.adobe.com/community/dreamweaver/dreamweaver_general

How do I eliminate the flicker in the slide show?

How do I eliminate the flicker in the slide show?

DJDismuke
I do not understand the status of this thread. You have asked your question. No one until I have responded. Yet the thread is marked Assumed Answered.
Nonetheless, moving forward.
What version of Premiere Elements are you using and on what computer operating system is it running? In the absence of specific details, I will generalize...
Typically there are two Premiere Elements features which allow you to try for flicker correction in the file.
a. Right click the Timeline file, select Field Options and then select there Flicker Removal.
or
b. Highlight the Timeline clip and get to the Motion Panel expanded where an anti-flicker filter slider exists.
If you are in the Elements Organizer Slideshow Editor that comes with Premiere Elements, there is no Flicker Removal
option there that I know of. If you are dealing with photos, does a slight blur effect work for you in this regard in Photoshop Elements. Have you looked at slight blur effect even in Premiere Elements?
Please post details that will help us to help you.
Thank you.
ATR
Add on....Where is this slideshow with the flicker issue....are you looking at it as a DVD-VIDEO on DVD disc or are you still the slideshow creation stage, previewing it in one of these programs?

How to make screen field enable when table control gives an error

Hi,
I had a scneario like when table control data wrong then one parameter of the screen should be enabled for the input, i knew that screen-name will not work since it will have always table control fields only when table control gives an error.
How to make the other parameter enable when table control throws an error.
Regards,
Jaya

Hi Gobi,
Thanks for your response, but issue is - how to make other screen fields enable when there was an error in the table control data.
For table control - lets say we will use the code as i mentioned above.i am sure that we cant write the code for field enable in between loop & endloop.
as you said if we right outside the loop-endloop, the module wont be triggered when table control throws an error, because that statement was not there in the loop-endloop.
please let me know if you need any more information on the issue. I hope there is alternative for this in SAP.
Thanks
Jaya

How to make a cycle of arrows

Hi I'm trying to draw a diagram in photoshop and need to make a cycle of arrows (like these: http://www.shutterstock.com/pic-13403155/stock-vector-vector-arrows-around-circles.html)
Is there a way to accomplish this?
Thanks in advance!

johnps11-
Try this link and get a free pack of vector arrows: http://vector.tutsplus.com/articles/web-roundups/free-vector-arrows/
Also this from a existing thread:
How to create a curved arrow in photoshop tutorial
Correct, that's a matter of using Paths (pen tool). However, there are a couple ways to go about it.
If you want a simple outlined head...
1) Draw a curved path, deselect it, then draw an angled path for the arrow head. Select both Paths and Stroke them using a brush that's the width/size you want your lines to be.
If you want a solid triangular shaped head...
2) Use the Line tool and set the Options to use the "Vector Shape Layer" setting (1st icon button on the far left of the bar).
In the Line tool settings also, open the Geometry Options menu and set your line to have an arrow head at the end of it.
Now draw a straight line, that starts and ends where you want your arrow to start and end.
Zoom in close on the middle of the line.
With the Pen tool selected, hold down the ALT key and click on one side of the line. Then click again on the opposite side of the line. This adds 2 new nodes to your path.
Hold the Ctrl key down and drag out a selection around these 2 new nodes. Then while still holding the Ctrl key, click-&-drag either of the nodes in the direction you want your arrow line to bend.
Click outside the shape to deselect it.
Now hold the Ctrl key again and drag out a selection around the 3 corner points on the solid arrow head (tip and both side corner).
Press Ctrl+T. Click-&-drag on the outside of the Distortion square to rotate your head so it's better aligned to your arrow line. Press the Enter key to apply, then deselect the path nodes. You now have 2 types of fully editable curved arrow lines.
good luck,
janelle

How to make a envelop distort like in this image

Hey guys I wanted to know how can i make a envelop distort like this image in adobe illustrator CS6. Im running it on Windows 7.

I still believe the originator of the artwork at least tried to keep to the straight and narrow. The crucial question is whether Hunter wishes to (too).
When zooming in as far as possible on the image (so it is 190 mm wide on screen), as far as I can see, the spaces are still constant width and the lettershapes at top and bottom are still straight, especially evident for the TE at the end, so I believe any deviation would be an inaccuracy. The rounding of the basically horizontal segments as in Envelope (or Art Brush) Distort should be clearly visible.
I believe Hunter may be able to make sure by zooming in on the actual artwork, and maybe measuring distances between key Anchor Points, and/or dragging with the Line Tool between them, in the latter case the top of the TE would show the greatest deviance from straightness.

How to make backwards navigation through slide shows possible?

Hi, I just made my first Encore DVD slide show and spent hours trying to figure out how to do this without a luck. The DVD is one Main Menu with buttons to different slide shows that are all set to manual advance. The end action of each slide show takes to the first image in the next slide show and that was easy and very obvious to achieve in Encore but I didn't find any way to achieve the same for backwards navigation. Does anybody know how to do that.
Will appreciate any help

In case my message wasn't clear, I will try to describe better what I want to achieve.
Currently the viewer starts from a Main menu with 16 buttons linked to 16 slide shows. Starting from the first or any slide show and pressing the next button after an image is displayed, the viewer can see linearly all images in all slide show from that point to the end without ever going to the main menu.
However if the viewer at any point start pressing the previous button on the remote control, he/she can only go to the start of the current slide show and the only way to get to a previous slide show is to use the Main menu button and then jump from there.
Is it possible to make a DVD thata will allow the view to go backwards through different slide shows by pressing the previous button??

How to make screens cycle through like a slide show.

Similar Messages

Maybe you are looking for