How to make the browser reload an updated jar-file?

Hi there,
Previosly when running applets using MSIE, all needed to reload an updated jar-file was pressing CTRL+F5
Currently I've been assigned to re-develop some of my old applets and now I realize that the old CTRL+F5 won't do the trick any more since the old jar file is still in the cache and the new jar file is not loaded.
I learned the hard way that all I can do is to manually clear the cache of the browser (Tools | Options | Delete files) and restart the browser and after that the new jar file is correctly loaded.
Cache settings of the browser is set to "Reload on every visit to the page"
Currently running Win2k, MSIE 6.0 SP1 and MSJVM 3809 but the problem also exists on Win2k, MSIE 6.0 and MSJVM 3186.
Isn't there any easier way to do this?
Currently I don't even mind not caching the jar-files at all as long as I don't get my development work trashed by having to restart the browser after every new build...
Why has the old CTRL+F5 behaviour been changed?
BR
/Jonas

I have been closing IE and reopening it for 7 months now. I don't of any other way to reload an applet.
Jason

Similar Messages

When I run a web browser immediately loaded two blank tabs. How to make the browser load the only one?

when I run a web browser immediately loaded two blank tabs. How to make the browser load the only one?

Did you check the home page setting to make sure that if doesn't have pipe (|) symbols?
See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

How to make the document dirty after updating the links?

Hi,
I am using the below code to update the link resources by providing new URI. The link resources are getting updated, but the document is not becoming dirty.
                InterfacePtr<ICommand> updateCmd(CmdUtils::CreateCommand(kLinkResourceStateUpdateCmdBoss));
                InterfacePtr<ILinkResourceStateUpdateCmdData> updateCmdData(updateCmd, UseDefaultIID());
                updateCmdData->SetResource(ref.GetUID());
                updateCmdData->SetDatabase(ref.GetDataBase());
                updateCmdData->SetNotify(true);
                updateCmdData->SetUpdateAction(ILinkResourceStateUpdateCmdData::kUpdateURI);
                updateCmdData->SetURI(newURI);
                updateCmd->SetUndoability(ICommand::kRegularUndo);
                CmdUtils::ProcessCommand(updateCmd);
How do I make the document dirty after updating the resources?
Thanks,

Thanks. It is working fine.
I called PreDirty(docPtr), before updating the links.

Don't know how to make my main class import a jar file

OK, the title doesn't make much sense but here are my create-jar.bat and manifest files:
create-jar.bat:
jar cvmf manifest.txt dassimul-admin.jar player/ admin/ com/ connector/ common/ *.class
manifest.txt:
Main-Class: admin.DASAdmin
the problem is that in connector/ folder there is the jdbc mysql connector driver (.jar file).
in Eclipse I can add this jar to the Java Build Path, so the program runs.
When I double-click the dassimul-admin.jar file, I get a Class Not Found Exception
C:\MYWORK\dassimul>java -jar dassimul-admin.jar
FATAL ERROR WHILE LOADING SQL DRIVER: java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
I think that the problem lies in the fact that admin.DASAdmin can't see and import the jar file in connector/ folder... am I right?

It looks like you are putting the mysql jar file inside the dassimul jar. That won't work unless you write custom code. You should use the Class-Path attribute of the manifest to define a relative path(s) to the other jar(s) that you need to use.
[http://java.sun.com/docs/books/tutorial/deployment/jar/index.html]

How to use the COMM API in a JAR file

I have developed an application, using the NetBeans IDE, to communicate with a modem over the COM1 serial port using the Java Comm API. The application works fine within the IDE, but when a JAR file is created and "double-clicked", the application launches correctly, but when the code is executed to "talk" over the COM1 serial port - nothing happens. No exceptions and no warnings are thrown. My environment is XP, SP1.
The manifest file is as follows:
Manifest-Version: 1.0
Class-Path: ../j2sdk1.4.2/jre/lib/ext/TimerBean.jar ../j2sdk1.4.2/jre/
lib/ext/AbsoluteLayout.jar ../j2sdk1.4.2/jre/lib/ext/comm.jar
Created-By: NetBeans IDE
Specified-By: Projects/TheApp/Files/TheApp.jarContent
Main-Class: Main
According to the Comm API installation instructions, the following files are copied:
copy comm.jar \j2sdk1.4.2\jre\lib\ext
copy wind32com.dll \j2sdk1.4.2\bin
copy javax.comm.properties \j2sdk1.4.2\jre\lib
I suspect it has something to do with the paths.
Any help would be greatly appreciated. Thanks.

Thanks for your input, but after trying what you suggested the problem still exists. I think your right to be suspicous of the javax.comm.properties file. The application, that worked in the IDE, exhibits the same behavoir as the JAR file if the javax.comm.properties file is removed from the ../jre/lib directory. In other words it compiles correctly in the IDE, but when executed, nothing happens when the code that "talks" to the serial port is run.
I've tried moving the javax.comm.properties file into the working directory. Also, the CLASSPATH and PATH system variables were modified to include the path to javax.comm.properties.
If you have anymore ideas, please let me know.
Thanks.

How to make the browser's menu and web address bar disapper?

Hi,
I want to run my application in full window. That is to say, I do not want the browser having menu and URL field.
Is there any way to do that?
Stephen

open method (window object)
Opens a new web browser window.
Syntax
[windowVar = ][window].open("URL", "windowName", ["windowFeatures"])
windowVar is the name of a new window. Use this variable when referring to a window's properties, methods, and containership.
URL specifies the URL to open in the new window. See the location object for a description of the URL components.
windowName is the window name to use in the TARGET attribute of a <FORM> or <A> tag. windowName can contain only alphanumeric or underscore (_) characters.
windowFeatures is a comma-separated list of any of the following options and values:
toolbar[=yes|no]|[=1|0]
location[=yes|no]|[=1|0]
directories[=yes|no]|[=1|0]
status[=yes|no]|[=1|0]
menubar[=yes|no]|[=1|0]
scrollbars[=yes|no]|[=1|0]
resizable[=yes|no]|[=1|0]
width=pixels
height=pixels
You may use any subset of these options. Separate options with a comma. Do not put spaces between the options.
pixels is a positive integer specifying the dimension in pixels.

How to make the headings bold of a csv file

Hi,
I am able to create .csv file, is there a way to make the content bold programmtically for the headings?
thanks
Shubha

No. A CSV file does not have formatting.

How to include the inner classes in a jar file in netbeans ide

Dear java friends
how to say to netbeans ide that it has to include the
inner classes in the jar file.
(i have one single applet class
with two inner classes that show up
in the build/classes file but not in the jar).
The applet works in the viewer but not
in the browser (I believe because the
xxx$yyy etc should be in the jar)
willemjav

First, please stop posting the same question multiple times:
Duplicate of http://forum.java.sun.com/thread.jspa?threadID=5269782&messageID=10127496#10127496
with an answer.
Second, If your problem is that you can't do this in NetBeans, you need to post to somewhere that provides NetBeans support - like the NetBeans website's mailing list. These forums do not support NetBeans (or any other IDE) - they are Java language forums.

Spry Collapsible Panel at bottom of page - how to make the browser scrolldown automatically

The question is -
i have a collapsible panel at the bottom of my page that I'm using as a footer menu.
It is 200px tall. The visitor clicks on "FIND OUT MORE", then the panel opens 200px tall.
I want the viewing area of browser to focus on the content of this panel, and automatically scroll down 200px to accomodate the new real estate at the bottom of the page.
Now they click on it, but then have to manually scroll down.
How can I do this? What do I add to the Spry Collapsible Panel js scripts?
I tried using a tag at the bottom of the 200px but can't get it to work correctly.
Dreamweaver CS5.
thanks

I have been closing IE and reopening it for 7 months now. I don't of any other way to reload an applet.
Jason

How to refer the unlimited key length JCE jar files.

Hi All,
The JDK 1.4.2_10 contains the local_policy.jar and US_export_policy.jar that do not permit an unlimited Key length( 64 bit).
- So I downloaded the unlimited ( Java(TM) Cryptography Extension (JCE) Unlimited Strength Jurisdiction Policy Files 1.4.2
) https://jsecom15d.sun.com/ECom/EComActionServlet;jsessionid=0F59ACFF95A61F6C0E78B5CE8E0FA93B.
-Now I want JDK to refer these files without changing anything in existing JDK ( Means I don't want to replcae the existing local_policy.jar , US_export_policy.jar ).
- Is there any option or property which can tell the JDK to refer the other
files instead of this location :- C:\bea\WLS8.1SP04\jdk142_05\jre\lib\security.
Means I want to override these 2 existing files local_policy.jar , US_export_policy.jar without replcaing them.
Any pointers will be highly appreciated.

A year later, this is still an issue. No replies ( btw, this is my new login name for the forums ).
Thank You.

How to make a page reload

Hi every body, and thank you for reading my post, here's the question I have
Does anybody know how can I make a page reload???
Thank's

If you mean how to make the page reload when someone pushes a button or clicks an action component such as a hyperlink, then have that component's action method return null. To create the action method for a component, double click the component in the Visual Designer.
To make the page reload after someone selects from a drop-down or list, or when the user changes the value in an input text field, right-click that component and choose Auto-Submit on Change.
Chris

How to make the ear file including the 3rd party jar files without menttion in the System Classpath.

Hai Sir,
I am facing one problme in weblogic8.1 while depolying the .EAR FILE.
Please help me sir.
Case1)     1) I am using the struts and log4j frameworks and 3rd party jar files with
weblogic8.1.
     2) I make the ejbs,webapplications and 3rdparty jar files, ear file the following
dir structure .And i mentioned the Class-path including all jar files in the MANIFEST
OF EAR FILE.
     While deploying the ear file it is giving following error.If log4j.jar does not
mention in the Weblogic script file
     java.lang.NoClassDefFoundError: org/apache/log4j/Priority
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:1494)
at java.lang.Class.getDeclaredFields(Class.java:1073)
at weblogic.ejb20.deployer.EJBModule.disableImplClassLoader(EJBModule.java:1082)
at weblogic.ejb20.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.jav
a:982)
at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:419)
at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.j
ava:2792)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.
java:1478)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:11
36)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:97
5)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareCon
tainer(SlaveDeployer.java:2571)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(Sla
veDeployer.java:2523)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeploy
er.java:2453)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer
.java:820)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:
536)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java
:494)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:
25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151)
Please provide the soluation without mentioning classpath in the weblogic script
.How to make the EAR file incliding ejbjar,webapplication and 3rd party jar files.
Thanks & Regards,
ASHOK SAMRAT
[email protected]

Refer to the section
Handling Utility classes
http://dev2dev.bea.com/products/wlserver/articles/musser.jsp
thanks,
Deepak
"Ashok Samrat" <[email protected]> wrote:
>
Hai Sir,
I am facing one problme in weblogic8.1 while depolying the .EAR FILE.
Please help me sir.
Case1)     1) I am using the struts and log4j frameworks and 3rd party jar
files with
weblogic8.1.
     2) I make the ejbs,webapplications and 3rdparty jar files, ear file
the following
dir structure .And i mentioned the Class-path including all jar files
in the MANIFEST
OF EAR FILE.
     While deploying the ear file it is giving following error.If log4j.jar
does not
mention in the Weblogic script file
     java.lang.NoClassDefFoundError: org/apache/log4j/Priority
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:1494)
at java.lang.Class.getDeclaredFields(Class.java:1073)
at weblogic.ejb20.deployer.EJBModule.disableImplClassLoader(EJBModule.java:1082)
at weblogic.ejb20.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.jav
a:982)
at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:419)
at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.j
ava:2792)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.
java:1478)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:11
36)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:97
5)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareCon
tainer(SlaveDeployer.java:2571)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(Sla
veDeployer.java:2523)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeploy
er.java:2453)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer
.java:820)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:
536)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java
:494)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:
25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151)
Please provide the soluation without mentioning classpath in the weblogic
script
How to make the EAR file incliding ejbjar,webapplication and 3rd party
jar files.
Thanks & Regards,
ASHOK SAMRAT
[email protected]

Detecting updated JAR files

Hi,
I have a problem that shows up somewhat infrequently. Once in a while, when I start my offline-allowed application, newer versions the application (e.g. updated JAR files) are not automatically downloaded. If I close the application and restart, the newer JAR files are properly downloaded. Has anyone else seen this problem?
A perhaps related question I have is how long does web start wait for the head request to come back when it checks for newer JAR files?
Thanks,
Joe

this post may help
http://forum.java.sun.com/thread.jsp?forum=38&thread=452567

When i update apps on my iphone they need the ID that i used when i downloaded these app and i forgot this ID and a make a new ID how i used the new one to update these apps thanks

Hello all,
when i update apps on my iphone they need the ID that i used when i downloaded these apps and i forgot this ID and a make a new ID
How i used the new one to update these apps?
thanks

Your device can hold apps from multiple IDs, but to update them you have to swicth identities which is time consuming. If possible use only the one ID. If you need to reset the password for your old ID visit My Apple ID.
tt2

How to make the zoom in/out scale appear in the media browser ?

How to make the zoom in/out scale appear in the media browser ? My videos only appear as a file list (only the names) and the zoom in/out device is currently not in the media browser...

I meant that there is no "Icon mode" button or "List mode" button in my media browser. How to make them appear ?

How to make the browser reload an updated jar-file?

Similar Messages

Maybe you are looking for