How to make this function random chose bits and flip it
Hi ni and member
I try to make this vi that do this function
I need it to use in academic research
I have stream of bits have length=100bitsmove in serial
and I want a selector that select between ratio 0.1 0.2 or 0.05 that represent error ratio
its ratio of bit that much flip (0 to 1) and (1 to 0)
for exqmple
for 0.1 ratio 10 bit of stream must randomly chosen and flipped
for 0.5 ratio 50 bit of stream must randomly chosen and flipped
any help please
best regards
hi ?Q>
GerdW wrote:
Hi mangood,
- use a ring or enum for your selector
- depending on the selector value create a boolean array containing randomly set bits
- XOR your boolean array with your stream bit array
Done...
thank you with kudos
i did not understand the stament """use a ring or enum for your selector"""
can you make a pic for the vi
best regards
hi ?Q>
Similar Messages
-
How to make this function module as RFC to get data from different system?
Hi
I am trying to use following function module . This function module is used to copy data from one cube to another cube within same system however I need a this should happen across two different system. How can I use this function module to make it remote call to different system and do the same function what it is doing ?
Name of function module -
RSDRT_INFOCUBE_DATA_COPY
Any help would be really helpful
AGHI,
let us say you want to copy the data of a cube in system A to a cube in system B .
1) create a RFC function module in system B (in this function module call the function module RSDRI_CUBE_WRITE_PACKAGE to update the data), this RFC function module should have same parametersa as RSDRI_CUBE_WRITE_PACKAGE .
2) write a program in system A .. read the data from the infocube using the function module RSDRI_INFOPROV_READ and call the RFC function module in system B that you have created..
for the details of the parameters to pass to these two function modules use the RSDRT_INFOCUBE_DATA_COPY and get the required code
Thanks
mahesh -
How to make this function in enviroment?
Hi I think I need some help here.
I want to set a enviroment to switch the audio instruments like the VSL performence tool:
when I press the first key on the midi keyboard, the first instruments plays , and then the second press , the second instruments play then the third press, the first instruments play .....i mean 2 instrument play in turns .
so anyone here can give me some suggestion how to build this enviroment?
Thanks at first.this is easy to setup with logic.
if you go to logicprohelp.com and look up environments and templates, download my basic orchestral template and you will see how i do it.
basically you set up a GM instrument cabled to a transformer and then to an audio instrument. the transformer then converts information you specify to control aspects of the audio instrumnet/s. in my case i use it to convert program changes to operate keyswitches or articulation switches in my custom made instruments.
to quickly achieve what you want to do use a cable switcher or selector in faders -> special to switch between different audio instruments.
- first create a GM instrument, name it and bring it up in arrange.
- then cable it to a cable switcher in the environment.
- cable the first cable to 1 AI then the next to the next and so on.
- select the cable switcher and define the paramter that will activate the switch in the paramters box on the LH side of the screen in environment. you may need to make sure that the midi channels match.
now, when you do your keyswitch or program change or set a controller the cable switcher will switch the midi information to the correct AI.
have a look at the percussion page in the environment of my full orchestral template to see how it works if you get stuck. -
How to make this functionality in a block
Hi,
i have 12 record db block on my forms..on the canvas 4 items are display items while 5 are text items...
i want to implement the fucntionality like this site has on my block
pls click the following link to open a page in internet explorer and when the page fully opens please chek the stats table on the right of page as u move ur mouse over the table/stats a gray visual attribute will highlight each row when u take the mouse over it..
suppose this is my block and there are 12 records now when the mose is over at any record the whole records visual attribute becomes gray...and when the mosue leave the record it should come to normal just as the webpage has
I say when 'mouse is over each record' not necessarily if the cursor is on the record..
http://tinyurl.com/9o5um
is it possible to achive this forms...
regards,
Asim.Two points for you, Ramis:
1. The mouse-over highlight only works in Intermet Explorer. I use Firefox, and it doesn't work there.
2. When-mouse-enter trigger works in client/server forms, but not web forms. So if you are planning on ever moving to web, using the Current Record VA might be a better idea. Users would just need to click on any item in the record. -
I have a Macbook Pro 15" that is three and a half years old. Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?
I have a 250 gig drive and try to keep at least 100 gigs unused at all times, 4 GB 667 MHz DDR2 SDRAM memory, back up with Time Machine and CrashPlan, and have OS X 10.7.3.
This was my first Mac since an old Apple II GS. After that I used PC's and got really good at reformatting, replacing drives, reinstalling, defragging, resolving software conflicts, etc. Since switching back to Macs (five in my extended family now), I haven't had to do any of those things. So, although, the cost is three times as much, the aggrevation has been ten times less.
I'm retired and living on a fixed income and would therefore like to keep this computer running as opposed to constatntly upgrading.
That said, any tips?
Thanks
It does have a crack on the left of the screen case about 3/4'' up from the bottom. I've posted that as another question.Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Adding more RAM, if feasible, and a new, faster hard drive may also help pep it up a little. -
Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.
Erica,
I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
For the rest of us, please post when you find a solution.
Best.
BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others) -
I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?
I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support. -
How to use this function in crm5.2 - /CEM/ENT_IMPORT_DATAFROMEXCEL
i am having a problem regarding how to use this function to import values from an excel sheet.
in call funtion what to specify at place of ct_ent_action = ?
CALL FUNCTION '/CEM/ENT_IMPORT_DATAFROMEXCEL'
CHANGING
CT_ENT_ACTION =
EXCEPTIONS
FILE_ERROR = 1
IMPORT_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.Hi
The use of Standard Parner functions are as follows:
1. Ordering Address (OA): The PO will be sent this vendor and not the main vendor.
2. Goods Supplier (WL): In case of return deliveries, Goods will be returned to thsi vendor's address
3. Invoicing party (RS): The payment will be made to this vendor.
Hope this clarifies.
Thansk -
How to make this in Adobe Photoshop CS5? PLEASE Help!
Hey guys, i reallllllllly want to know how to make this image in adobe photoshop.... the cone around the forecast track. Can you guys please show me how to do this? Id greatly appreciate it!
There's a lot implied here, but you're not going to get around having to do the following in general:
Use an unmarked map as a background.
Draw shapes on layer(s) above the background and make them partially transparent.
Obviously the key is to draw shapes that express the "cone of uncertainty" exactly as you want it to look, and with a minimum of fuss.
I'd suggest drawing shapes with Path tools, then filling the shapes, applying a stroke (for the edge border), and using masking to hide parts you don't want to show (or which overlap with the other parts you're drawing).
Are you needing to do this over and over or just once?
-Noel -
How to make this effect in Keylight?
Hi, I have question, how to make this effect in Keylight?
I know that this overlay is added here:
http://oi57.tinypic.com/1174fup.jpg
Photos:
http://iv.pl/images/18475588964010299091.jpgKeylight what? All I see is some effect similar to Leave Color, a.k.a the Pleasantville effect that made the rounds 10 years ago. It may require additional masking and otehr effects, but definitely not something that is specifically related to Keylight...
Mylenium -
I am not sure how to call this Function correctly and how to pass the IN parameter, I am still new and learning, please help!
So far I have compiled it, and it compiled fine and saved it in my schema.
It is supposed to be able to calculate the compression ratio for say TABLE_1234 to see how much space it would save if
I used the COMPRESS option in 10G.
CREATE OR REPLACE function Y775.compression_ratio (tabname varchar2)
return number is
pragma autonomous_transaction;
-- sample percentage
pct number := 0.000099;
-- original block count (should be less than 10k)
blkcnt number := 0;
-- compressed block count
blkcntc number;
begin
execute immediate ' create table TEMP_UNCOMPRESSED pctfree 0
as select * from ' || tabname ||
' where rownum < 1';
while ((pct < 100) and (blkcnt < 1000)) loop
execute immediate 'truncate table TEMP_UNCOMPRESSED';
execute immediate 'insert into TEMP_UNCOMPRESSED select * from ' ||
tabname || ' sample block (' || pct || ',10)';
execute immediate 'select
count(distinct(dbms_rowid.rowid_block_number(rowid)))
from TEMP_UNCOMPRESSED' into blkcnt;
pct := pct * 10;
end loop;
execute immediate 'create table TEMP_COMPRESSED compress as
select * from TEMP_UNCOMPRESSED';
execute immediate 'select
count(distinct(dbms_rowid.rowid_block_number(rowid)))
from TEMP_COMPRESSED' into blkcntc;
execute immediate 'drop table TEMP_COMPRESSED';
execute immediate 'drop table TEMP_UNCOMPRESSED';
return (blkcnt/blkcntc);
end;
/Ok, ok - so I have updated the function and it compiled, fine, but now nothing is returned, I thought that a number was returned ?
CREATE OR REPLACE function Y775.compression_ratio (tabname varchar2)
return number
AUTHID CURRENT_USER
is
pragma autonomous_transaction;
-- sample percentage
pct number := 0.000099;
-- original block count (should be less than 10k)
blkcnt number := 0;
-- compressed block count
blkcntc number;
begin
execute immediate ' create table TEMP_UNCOMPRESSED pctfree 0
as select * from ' || tabname ||
' where rownum < 1';
while ((pct < 100) and (blkcnt < 1000)) loop
execute immediate 'truncate table TEMP_UNCOMPRESSED';
execute immediate 'insert into TEMP_UNCOMPRESSED select * from ' ||
tabname || ' sample block (' || pct || ',10)';
execute immediate 'select
count(distinct(dbms_rowid.rowid_block_number(rowid)))
from TEMP_UNCOMPRESSED' into blkcnt;
pct := pct * 10;
end loop;
execute immediate 'create table TEMP_COMPRESSED compress as
select * from TEMP_UNCOMPRESSED';
execute immediate 'select
count(distinct(dbms_rowid.rowid_block_number(rowid)))
from TEMP_COMPRESSED' into blkcntc;
execute immediate 'drop table TEMP_COMPRESSED';
execute immediate 'drop table TEMP_UNCOMPRESSED';
return (blkcnt/blkcntc);
end;
/ -
Is possible to have a script that makes a text randomly have caps and lower caps... i would love to create a kind of effect so it would look like manuscript - but it cannot be only the same letter in caps or lower caps - I wOuld NeEd oF SOmeTHing LikE This (random) - is it possibel?
Hi,
Sample with 2 regex:
Launching the 1rst regex:
Launching the 2nd regex: -
How to use this function call function 'REUSE_ALV_COMMENTARY_WRITE' in alv
hi all
thanks in advance
how to use this function in alv programming
call function 'REUSE_ALV_COMMENTARY_WRITE'
why use and what purpose use this function plz tell me details
plz guide me
thanksHi
see this exmaple code where i had inserted a LOGO by useing this FM
*& Report ZTEST_ALV_LOGO
REPORT ztest_alv_logo.
TYPE-POOLS : slis.
*ALV Formatting tables /structures
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: gt_events TYPE slis_t_event.
DATA: gs_layout TYPE slis_layout_alv.
DATA: gt_page TYPE slis_t_listheader.
DATA: gs_page TYPE slis_listheader.
DATA: v_repid LIKE sy-repid.
*ALV Formatting work area
DATA: w_fieldcat TYPE slis_fieldcat_alv.
DATA: w_events TYPE slis_alv_event.
DATA: gt_bsid TYPE TABLE OF bsid WITH HEADER LINE.
INITIALIZATION.
PERFORM build_events.
PERFORM build_page_header.
START-OF-SELECTION.
*perform build_comment. "top_of_page - in initialization at present
SELECT * FROM bsid INTO TABLE gt_bsid UP TO 10 ROWS.
*perform populate_for_fm using '1' '3' 'BUKRS' '8' 'GT_BSID' 'Whee'.
*USING = Row, Column, Field name, display length, table name, heading
*OR
PERFORM build_fieldcat.
gs_layout-zebra = 'X'.
*top of page event does not work without I_callback_program
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_structure_name = 'BSID'
i_background_id = 'ALV_BACKGROUND'
i_grid_title = 'This is the grid title'
I_GRID_SETTINGS =
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
it_events = gt_events[]
TABLES
t_outtab = gt_bsid.
Form..............: populate_for_fm
Description.......: Populates fields for function module used in ALV
FORM populate_for_fm USING p_row
p_col
p_fieldname
p_len
p_table
p_desc.
w_fieldcat-row_pos = p_row. "Row Position
w_fieldcat-col_pos = p_col. "Column Position
w_fieldcat-fieldname = p_fieldname. "Field name
w_fieldcat-outputlen = p_len. "Column Lenth
w_fieldcat-tabname = p_table. "Table name
w_fieldcat-reptext_ddic = p_desc. "Field Description
w_fieldcat-input = '1'.
APPEND w_fieldcat TO gt_fieldcat.
CLEAR w_fieldcat.
ENDFORM. " populate_for_fm
*& Form build_events
FORM build_events.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = gt_events.
READ TABLE gt_events
WITH KEY name = slis_ev_user_command
INTO ls_event.
IF sy-subrc = 0.
MOVE slis_ev_user_command TO ls_event-form.
APPEND ls_event TO gt_events.
ENDIF.
READ TABLE gt_events
WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE slis_ev_top_of_page TO ls_event-form.
APPEND ls_event TO gt_events.
ENDIF.
ENDFORM. " build_events
*& Form USER_COMMAND
When user command is called it uses 2 parameters. The itab
passed to the ALV is in whatever order it currently is on screen.
Therefore, you can read table itab index rs_selfield-tabindex to get
all data from the table. You can also check r_ucomm and code
accordingly.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
READ TABLE gt_bsid INDEX rs_selfield-tabindex.
error checking etc.
SET PARAMETER ID 'KUN' FIELD gt_bsid-kunnr.
CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDFORM. "user_command
*& Form top_of_page
Your own company logo can go here if it has been saved (OAOR)
If the logo is larger than the size of the headings in gt_page,
the window will not show full logo and will have a scroll bar. Thus,
it is a good idea to have a standard ALV header if you are going to
use logos in your top of page.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = gt_page
i_logo = 'ENJOYSAP_LOGO'.
ENDFORM. "top_of_page
*& Form build_fieldcat
*Many and varied fields are available here. Have a look at documentation
*for FM REUSE_ALV_LIST_DISPLAY and REUSE_ALV_FIELDCATALOG_MERGE
FORM build_fieldcat.
w_fieldcat-fieldname = 'BUDAT'.
w_fieldcat-seltext_m = 'Dte pst'.
w_fieldcat-ddictxt(1) = 'M'.
w_fieldcat-edit = 'x'.
Can change the position of fields if you do not want them in order
of the DDIC or itab
w_fieldcat-row_pos = '1'.
w_fieldcat-col_pos = '10'.
APPEND w_fieldcat TO gt_fieldcat.
CLEAR w_fieldcat.
ENDFORM. " build_fieldcat
*& Form build_page_header
gt_page is used in top of page (ALV subroutine - NOT event)
*H = Header, S = Selection, A = Action
FORM build_page_header.
For Headers, Key is not printed and is irrelevant. Will not cause
a syntax error, but is not used.
gs_page-typ = 'H'.
gs_page-info = 'Header 1'.
APPEND gs_page TO gt_page.
gs_page-typ = 'H'.
gs_page-info = 'Header 2'.
APPEND gs_page TO gt_page.
For Selections, the Key is printed (bold). It can be anything up to 20
bytes. It gets printed in order of code here, not by key value.
gs_page-typ = 'S'.
gs_page-key = 'And the winner is:'.
gs_page-info = 'Selection 1'.
APPEND gs_page TO gt_page.
gs_page-typ = 'S'.
gs_page-key = 'Runner up:'.
gs_page-info = 'Selection 2'.
APPEND gs_page TO gt_page.
For Action, Key is also irrelevant.
gs_page-typ = 'A'.
gs_page-info = 'Action goes here'.
APPEND gs_page TO gt_page.
ENDFORM. " build_page_header -
How to make a function return number(10,0) data type (ORACLE 10g)?
With 10g, how to make a function return number(10,0) data type?
here is the function, it returns a number type :
create or replace FUNCTION Get_portfolio_Id3 (p_HistObjTable In Varchar2,p_LHISTOBJID IN NUMBER) RETURN view_cpu_STD_Asset.LPORTFOLIOITEMID%Type IS
v_Id view_cpu_STD_Asset.LPORTFOLIOITEMID%Type;
BEGIN
If p_HistObjTable ='amPortfolio'
then v_Id:=p_LHISTOBJID ;
elsIf p_HistObjTable = 'amComputer' then
select litemid into v_Id from smcdba.amComputer c where c.LCOMPUTERID=p_LHISTOBJID ;
else v_Id:=-99;
End If;
RETURN v_Id;
END Get_portfolio_Id3;
Thanks.
Message was edited by:
user631701create or replace FUNCTION Get_portfolio_Id3 (p_HistObjTable In Varchar2,p_LHISTOBJID IN NUMBER) RETURN view_cpu_STD_Asset.LPORTFOLIOITEMID%Type IS
v_Id view_cpu_STD_Asset.LPORTFOLIOITEMID%Type;
BEGIN
If p_HistObjTable ='amPortfolio'
then v_Id:=p_LHISTOBJID ;
elsIf p_HistObjTable = 'amComputer' then
select litemid into v_Id from smcdba.amComputer c where c.LCOMPUTERID=p_LHISTOBJID ;
else v_Id:=-99;
End If;
RETURN round(v_Id);
END Get_portfolio_Id3; -
How to use this function module on abap hr GET_PDSNR_RANGE
how to use this function module on abap hr GET_PDSNR_RANGE
thankx.PASS INETRNAL TABLE WITH SOME DATA TO TABELLE FOR GENERATING PDSNR SEQUENCE
Maybe you are looking for
-
Can't install iTunes on Windows XP professional
Hi, I am facing this message while installing iTunes on my Windows XP Professional, it reads as mentioned below. It says " The procedure entry point AVCF player enable hardware accelerated video decoder key could not be loacted in the dynamic link li
-
I want a mac book air. Preferable a maxium of 1 year old, but I don't have the money to buy a new or referbished one. Please help.
-
Ordering jQuery Content in a Master File and a Dependent Page
Hey guys, OT situation but thought you may be able to help. I have a Mega Menu in a Template and Slider on a Dependent Page. The Mega Menu is going behind the page content. How can I properly order this? Rob
-
Use of the Business Views from EBS
Hi, I am working with a customer that use EBS and are thinking of implementing the pre-built Discoverer workbooks that are based on the business views. Is this what's called DBI (Daily Business Intelligence ) or BIS ( Business Intelligence System ) ?
-
Hi, Can the CSM be used in both the bridge and router mode for different VLANS ? Or does it need to use all router mode and all bridged mode ?