Ordering jQuery Content in a Master File and a Dependent Page

Hey guys,
OT situation but thought you may be able to help.
I have a Mega Menu in a Template and Slider on a Dependent Page. The Mega Menu is going behind the page content. How can I properly order this?
Rob

Actually, the master has a table and the page content is in a lower cell. The menu is a Superfish menu and the slider is Accordionza. In FF, things look ok except when there is a movie in a slider div. In IE, it is wrong, regardless.
Found THIS to be an answer for most content: http://www.onlinecasinodemar.com/webdesign/superfish-jquery-menu-ie-z-index-bug/
On the Vimeo video, the issue was old embed code. The iframe code works. Hope this helps someone else.

Similar Messages

Keywords in Master file and AP database-- Export Problem.

I believe that I have a conflict with keywords. I believe that I have "baked in" keywords by writing IPTC to the Master files and then added more keywords which I am guessing are in the Aperture database and not "baked in". When I then look at exported images using the XMP sidecar file with Adobe Bridge all of the keywords do not show up. I want to experiment with Lightroom and I want all of the keywords.
My process has been:
1. Add keywords to images from the keywords panel.
2. Write the IPTC metadata to the master files.
3. Add more keywords to the images from the keywords panel.
4. Export the images using the File/Export Masters/Create IPTC4XMP sidecare file.
5. Look at the exported images in other applications (Bridge and PhotoMechanic).
How can I export using XMP sidecar files and have ALL the keywords be exported???
DickB

Yes, this is a known problem; sqldev distinguishes between the Constraint and the Index although the former implies the latter...
Regards,
K.

Is it better to output t master file and then upload to youtube?

I had to upload 33 videos to youtube today
This has taken tooo long
Just wondering, is it better to create a master file and then upload to youtube?
I could maybe just copy the files to another machine and leave it to upload?
Thanks
Omar

just to add:
don't try to upload your Masterfile to YouTube!
usually, the Masterfile is a copy of the projects timeline = proRes.
that creates incredible large files = time for upload, wasting bandwidth, and YT will complain 'wrong settings'
After saving a masterfile, which goes fast, you should use a 'Converter' of your choice (QuicktimePro, Mpg Streamclip, Compressor) to transcode into YT's recommended upload settings.-

Can a search engine read the contents of a Library file embedded in a page?

Can a search engine read the contents of a Library file
embedded in a page? Or would SSI be the way to go. I'm creating a
large library of text-based information and links, and I want to
have much of it modular so I can add a link and all the many pages
on my site updates to reflect the change. A big concern is that
when a search engine visits my site, can it read the content
embedded in the library item, or is SSI a better method to help the
search engine read my content?
Thanks

Yes, search engines can read Dreamweaver library items. The
library only exists on your own hard drive. Once you add the
library item to your pages it's in there as regular HTML.
If you have more than 20 pages on your site, they say SSI is
better, because when you update you only update the SSI. If you
stick with library items each page has to be uploaded every time
the library is updated.

I am trying to export a video I have made in FCP 10.0.8 to Youtube or to a master file and I keep on getting an error -50, or "error exporting master file at frame 20074" Any ideas?

Having used FCExpress for a while I decided to give FC Pro X a trial, I created my first video with it, exported to youtube and it worked fine. I am now trying to export my second video to youtube and I get an error -50 which means absolutely nothing. Not being defeated that easy I tried exporting to a mster file using the H.264 codec and I get an error "exporting master file at frame 20074" - again another useless error. It takes at least 10 minutes to get to this error after the rendering has started, it gets about 12% in. Any ideas where to start - I am seriously at the point of giving up with Final Cut Pro X simply on the basis of it being more trouble than its worth - I am just glad I did not pay for it yet...
Any help would be much appreciated.
Gerry

Hi Russ,
Thanks for your response. I am not an experienced user of FC or other video editing software but if its that hit and miss I think I will go to the trouble of finding some better software - I have a busy enough life as is, I don;t want to get into second guessing what a software problem might be!
I have just successfully exported my video to a master file using one of the Apple codec options so it looks like it could be to do with the H.264 codec. I am wondering if Apples Compressor software would solve this problem - the only way to try this it to buy it, there is not trial for the compressor app. Any ideas?
Thanks
Gerry

Help on retriving the content from a excel file and web page

hi,
i need help on identify the content on a webpage. how to do this ?
in myproject i need to read an excel file how to read an excel file , in java?
after reading the excel file ,i have to open a webpage based on the link available in the excel file.
how to perform this action?
and from the web page i need to retrive the each individual text
how to perform these action?
please help .... urgent
regards,
valli

sales team will enter data in excel file .
the excel file will have a list of links ,
i need to access the excel file and open that link.
from the link i will get some information ,such as
company name, address, phone no, contact details.
i need to identify each individual (address, email
id) from the web page and store that data in the data
base .
how to access a excel file from java?
i found in google jakartha-poi-jar file.
but ther eare many jar file. which one i have to
download?
how to identify from a web page these different
items?
thanksPlease answer DrClaps's question from reply #3.

How to read the contents of a text file and populate the data in a table ?

Hello All,
Can anyone advise on how to acheieve the above ? I am trying to read in a text file (CSV) and have the contents populated to the respective UI elements in a table. Any help is greatly appreciated.
from
Kwok Wei

Hi,
Let us consider you have list of names(Seperated by delimeter) in a text file and you want to display in a table.
1. Create Context Node "Names" and context attribute "Name"
2. Create Table and bind to the above context.
3.Write the following code in the "Init method.
try{
FileReader f =new FileReader("");
BufferedReader r=new BufferedReader(f);
String names=r.readLine();
Vector Names=new Vector();
// Use Tokenizer and store all the names i a vector//
for(int i=0;i<Names.size();i++){
IPrivate<<VieName>>.INameElement ele=wdContext.createNameElement();
ele.set<<Name>>( Names.get(i).toString());
wdContext.NodeName().addElement(ele);
Regards, Anilkumar
Message was edited by: Anilkumar Vippagunta

I removed my /Applications/Safari.app/Contents/Resources/.VideoCaptureFactory.* files and now Safari will not open. How do I fix this?

Hi,
In a stupid attempt to "fix" my computer, I removed my /Applications/Safari.app/Contents/Resources/.VideoCaptureFactory.* files (one was a .png and the other was a .xls).
I followed these steps:
Manual Removal Instructions
1. Run the following command in Terminal:
defaults read /Applications/Safari.app/Contents/Info LSEnvironment
2. Take note of the value, DYLD_INSERT_LIBRARIES
3. Proceed to step 8 if you got the following error message:
"The domain/default pair of (/Applications/Safari.app/Contents/Info, LSEnvironment) does not exist"
4. Otherwise, run the following command in Terminal:
grep -a -o '__ldpath__[ -~]*' %path_obtained_in_step2%
5. Take note of the value after "__ldpath__"
6. Run the following commands in Terminal (first make sure there is only one entry, from step 2):
sudo defaults delete /Applications/Safari.app/Contents/Info LSEnvironment
sudo chmod 644 /Applications/Safari.app/Contents/Info.plist
7. Delete the files obtained in steps 2 and 5
8. Run the following command in Terminal:
defaults read ~/.MacOSX/environment DYLD_INSERT_LIBRARIES
9. Take note of the result. Your system is already clean of this variant if you got an error message similar to the following:
"The domain/default pair of (/Users/joe/.MacOSX/environment, DYLD_INSERT_LIBRARIES) does not exist"
Is there a way to update my db to not look for this or did I remove something crucial to the functioning of Safari? I feel like an idiot.
Thanks for any help.
Sincerely,
Sterling MacNay

You installed a variant of what’s commonly called the “Flashback” or “Fakeflash” trojan, although the names are obsolete.
If you’re certain you know when that happened, and you back up with Time Machine or something similar, you can save yourself a lot of time by restoring your whole system from the most recent snapshot taken before it was infected. Then take Steps 7, 8, and 10 below.
How can you tell when the infection took place? All you can be sure of is that you were infected some time before the problems started. You may have visited a blog that prompted you to install some kind of software, or a “certificate.” You entered your administrator password when prompted. If you remember doing that recently, mention it in a reply, but don’t post a link.
If you don’t know when you were infected, there's no easy, reliable way to remove the malware, because it's constantly changing. There are differences of opinion on this site as to the best of course of action, so you should do your own research before deciding how to proceed.
I suggest you take the following steps:
1. Back up all data to at least two different devices, if you haven't already done so.
2. Boot from your recovery partition (if running Mac OS X 10.7 or later) or your installation disc (if running an earlier version of the Mac OS), launch Disk Utility, and erase the startup volume. This action will destroy all data on the volume, so you must be sure of your backups.
3. Install the Mac OS.
4. Reboot and go through the initial setup process to create an account with the same name as your old one. Don’t import anything from your backups at this stage.
5. If running Mac OS X 10.6.x or earlier, run Software Update. You may have to run it more than once to fully update your system.
6. Restore the contents of the top-level subfolders of your home folder except “Library” from the most recent backup. The Library folder may contain components of the malware. It’s best not to restore anything from there. If you must do so, restore only files, not whole folders with all their contents, and only if (a) they’re visible in the Finder, and (b) you know what they are, and (c) they haven’t been altered. Don’t restore anything in the home subfolder Library/LaunchAgents, if it exists, or any hidden files or folders, no matter where they are.
7. If you’re running Mac OS X 10.5.8 or earlier, launch Safari and select Safari ▹ Preferences… ▹ Security from the menu bar. Uncheck the box labeled Enable Java. Because of known bugs, Java in those OS versions is unsafe to use on the Internet. (Note: I’m not referring to JavaScript, which is unrelated to Java, despite the similar names.) If you’re running Mac OS 10.6.8 or later, you should still disable the Java web plugin unless you really need it. Few websites have legitimate Java content nowadays. If you encounter one that does, enable Java temporarily.
8. Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Take this step only after you’ve secured your system in the preceding steps, not before.
9. Reinstall your third-party software from fresh downloads or original media, not from backups which may be contaminated.
10. If you use any third-party web browsers, disable Java in their preferences. As with step 7, this step is mandatory if you’re running any version of Mac OS X older than 10.6. Otherwise it’s optional, but recommended.

Sorting file content of a huge file and less RAM

Hi,
I want to sort the content of a big file. In a file each line ended by \n is one record. I want to sort the lines alphabetically.
for eg.
The file test.txt contains the following data
pqr xyz \n
abc xyz \n
The sorted file should contain
abc xyz \n
pqr xyz \nand also the file size is very big around 20GB. and RAM is very less so it is not even possible to load such a huge file in memory.
How to solve the above problem? Can anyone suggest me the good solution?
Thanks

Getting rid of the file in favor of a database sounds pretty good to me.Have you any clue how much time it will take to insert 20 GB into a relation database?
I find szgy's solution sutaible for me
but I think before merging (step 5) the data in
separate files (compare set of two files) should be
compared and should be written to a new file. Then
these resultant files should be compared again tili
it becomes a single file.you can merge all the files at once to using a heap, hence avoiding unnecessary file-writes.
>
The above step is required since I'm reading data
from a file. I'll be taking the first few lines and
sorting them and writing into new file. Here each
file is sorted. but if you merge all the sorted files
as it is the resultant file will not have sorted data
since there was no comparision.
Now I'll have to think upon sorting algorithms and
merging of files after comparing data between two
filesYou can email me at [email protected] to get a full working code that does all this for integers, including merging the results with help of a heap.
For 10000000 (400 MB) it takes (in ms):
other read write sort
2579 16655 35407 37422
Total is 80 sek, which is fairly ok for 400 MB of data I think (5 MB/sek) including reads and writes.
Gil

VBScript to read the content of a .csv file and delete old files mentioned in the .csv

I have a Windows 2003 file server.
I have generated a report in .csv format, about the files which are older than 1 year.
I need a VBScript to read the .csv file and delete the files which are enlisted there.
Can someone please help me with this?

Look into the "Learn" link above. There are resources and instructions on how to write VBScript code. Look into how to use the FileSystemObject.
¯\_(ツ)_/¯

JSP, downloading files and show html page

I like to download files and show a html page on JSP.
With the source following, downloading works well.
But, it is just remained on the previous page, not showing the next html page.
Someone tell me why is it?
<%@ page import="java.io.*, java.net.URL"%><%
String file_name = request.getParameter("file_name");
File fileDir = new File(config.getServletContext().getRealPath("upload/"));
File theFile = new File(fileDir, file_name);
FileInputStream fin = new FileInputStream(theFile);
response.setHeader("Content-Disposition","attachment; filename=\"" + theFile.getName()+"\"");
response.setContentLength((int) theFile.length());
BufferedInputStream bf = new BufferedInputStream(new FileInputStream(theFile), 8096);
int i;
while ((i=bf.read()) != -1)
out.write(i);
bf.close();
out.close();
%>
<html>
<head>
<title>file download</title>
</head>
<body>
<p align="center"> </p>
<p align="center"><b><font face="Tahoma" color="#000000" size="2">You have
successfully downloaded your file(<%=file_name%>)!</font></b></p>
</body>
</html>

You's already close the JSP output stream befor you try and write your html confirmation, and I don't think browsers can provide the kind of functionality you're trying to demonstrate here. A browser will download the file and open it directly itself or using another application based on user input (e.g. save as, open file, etc.). Once the file is opened or downloaded, it's done!
I think your best bet is to show a dialogue that the user's download should begin, then set the pages href w/ JS to the location of the file, same way other sites that allow you to download files do it. Go take a look at download.com or something like that.
Hope that helps.

How can I upload an audio file and link a page on my webiste to it?

I host a radio show weekly, have recorded broadcasts in MP3, want to host them on itunes and have a link from my website for visitors to listen to. Can anyone help me? Thanks

Could I ask you to read my 'get you started' page on podcasting, which should answer most of your questions.
http://rfwilmut.net/pc
If you still have questions do please come back.
As to your website, which is a separate matter from iTunes, you can provide embedded players - these pages gives you some information:
How to embed an MP3 audio file into a web page without bringing up dialog boxes in Windows
How to create a pop-up MP3 player

I moved a html file and now the page doesn't have a background

I was trying to remove the .html tags from my web pages and followed the advice on this past post. I created a new folder in Dreamweaver's File tab, then moved the .html file over and renamed it to index.html. Unfortunatley the swf and background images are broken and can't reference them. I'm wondering what step I missed, or how can I relink them?
Original how to remove .html link discussion I referenced.
http://forums.adobe.com/message/722731#722731
I wanted to try and use .htaccess with my current GoDaddy account, but I couldn't get that working correctly.
http://simplemediacode.info/remove-index-html-andor-index-php-from-the-url/
My website blank page.
http://www.victorylcms.org/testimonials/
Thanks for any help!

You have bad paths to all your external CSS and Scripts. Typically when you move a file into a folder in the Files Panel, DW will ask you if you want to update links. You should have hit YES.
To fix the problem, change all of this in your code:
<link href="style.css" rel="stylesheet" type="text/css" />
<link href="layout.css" rel="stylesheet" type="text/css" />
<script src="js/jquery-1.3.2.min.js" type="text/javascript"></script>
<script src="js/cufon-yui.js" type="text/javascript"></script>
<script src="js/cufon-replace.js" type="text/javascript"></script>
<script src="js/Schneidler_Md_BT_400.font.js" type="text/javascript"></script>
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>

<script type="text/javascript" src="/assets/js/jquery.cycle.lite.js"></script>
to this:
<link href="../style.css" rel="stylesheet" type="text/css" />
<link href="../layout.css" rel="stylesheet" type="text/css" />
<script src="../js/jquery-1.3.2.min.js" type="text/javascript"></script>
<script src="../js/cufon-yui.js" type="text/javascript"></script>
<script src="../js/cufon-replace.js" type="text/javascript"></script>
<script src="../js/Schneidler_Md_BT_400.font.js" type="text/javascript"></script>
<script src="../Scripts/swfobject_modified.js" type="text/javascript"></script>

<script type="text/javascript" src="../assets/js/jquery.cycle.lite.js"></script>
Nancy O.

Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
It think it gives this error message when i reach 24% everytime during export.
So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
Taphabit

boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
is there any way of preemptively avoiding it in future projects?
thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

Reading from a text file and displaying the contents with in a frame

Hi All,
I am trying to read some data from a text file and display it on a AWT Frame. The contents of the text file are as follows:
pcode1,pname1,price1,sname1,
pcode2,pname2,price2,sname1,
I am writing a method to read the contents from a text file and store them into a string by using FileInputStream and InputStreamReader.
Now I am dividing the string(which has the contents of the text file) into tokens using the StringTokenizer class. The method is as show below
void ReadTextFile()
                    FileInputStream fis=new FileInputStream(new File("nieman.txt"));
                     InputStreamReader isr=new InputStreamReader(fis);
                     char[] buf=new char[1024];
                     isr.read(buf,0,1024);
                     fstr=new String(buf);
                     String Tokenizer st=new StringTokenizer(fstr,",");
                     while(st.hasMoreTokens())
                                      pcode1=st.nextToken();
                           pname1=st.nextToken();
          price1=st.nextToken();
                          sname1=st.nextToken();
     } //close of while loop
                } //close of methodHere goes my problem: I am unable to display the values of pcode1,pname1,price1,sname1 when I am trying to access them from outside the ReadTextFile method as they are storing "null" values . I want to create a persistent string variable so that I can access the contents of the string variable from anywhere with in the java file. Please provide your comments for this problem as early as possible.
Thanks in advance.

If pcode1,pname1,price1,sname1 are global variables, which I assume they are, then simply put the word static in front of them. That way, any class in your file can access those values by simply using this notation:
MyClassName.pcode1;
MyClassName.pname1;
MyClassName.price1;
MyClassName.sname1

Ordering jQuery Content in a Master File and a Dependent Page

Similar Messages

Maybe you are looking for