How to make user view available in an workitem form

Hi,
How to get hold of the user view in an workitem form ?
I want to display some of the user information in the workitem form for which I require the user view.
Thanks.
- mangb

If you have a userview in the workflow, you should be able to access it in the manual action (Workitem form).
Just make sure the form base-context is taken into consideration while referencing the workflow variables (userview in your case).
Adi.

Similar Messages

How to make saved IR available for all users

Hi,
I've created IR and saved it to several tabs based on search conditions.
But they're only visible for developers.
How to make these tabs available for all end-users ?
Does version 4.0 support this option ?
Thank you!

Hi
At present this feature is not included, although I believe it may be in 4.0. Many people have provided workarounds for this. None of which I have tried. I cannot find the original thread but here is a solution from a chap called Ruud
>
One way to share your saved reports with others is to 'Publish' your report settings to a few intermediate tables in your application and have other users 'Import' your settings from there. The reason for using intermediate tables is so that not all your saved reports need to be 'visible' to other users (only those that you've chosen to publish).
Basically you have available the following views and package calls that any APEX user can access:-
- flows_030100.apex_application_pages (all application pages)
- flows_030100.apex_application_page_ir_rpt (all saved reports - inclusing defaults and all user saved reports)
- flows_030100.apex_application_page_ir_cond (the associated conditions/filters for above saved reports)
- wwv_flow_api.create_worksheet_rpt (package procedure that creates a new saved report)
- wwv_flow_api.create_worksheet_condition (package procedure that creates a condition/filter for above saved report)
The way I've done it is that I've created 2 tables in my application schema that are straightforward clones of the 2 above views.
CREATE TABLE user_report_settings AS SELECT * FROM flows_030100.apex_application_page_ir_rpt;
CREATE TABLE user_report_conditions AS SELECT * FROM flows_030100.apex_application_page_ir_cond;
( NB. I deleted any contents that may have come across to make sure we start with a clean slate. )
These two tables will act as my 'repository'.
To simplify matters I've also created 2 views that look at the same APEX views.
CREATE OR REPLACE VIEW v_report_settings AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_rpt r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND r.session_id IS NULL
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
CREATE OR REPLACE VIEW v_report_conditions AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_cond r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
I then built 2 screens:-
1) Publish Report Settings
This shows 2 report regions:-
- Region 1 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT apex_item.checkbox ( 1, report_id ) " ",
page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY page_name,
report_name
Each row has a checkbox to select the required settings to publish.
The region has a button called PUBLISH (with associated process) that when pressed will copy the settings from
V_REPORT_SETTINGS (and V_REPORT_CONDITIONS) into USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
- Region 2 - Shows a list of already published reports in table USER_REPORT_SETTINGS (again filtered for your user)
SELECT apex_item.checkbox ( 10, s.report_id ) " ",
m.label,
s.report_name
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user = :APP_USER
AND ( s.page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY m.label,
s.report_name
Each row has a checkbox to select a setting that you would like to delete from the repository.
The region has a button called DELETE (with associated process) that when pressed will remove the selected
rows from USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
NB: P27_REPORT is a "Select List With Submit" to filter the required report page first.
Table MENU is my application menu table where I store my menu/pages info.
2) Import Report Settings
This again shows 2 report regions:-
- Region 1 - Shows a list of all published reports in table USER_REPORT_SETTINGS (filtered to show only other users saved reports)
SELECT apex_item.checkbox ( 1, s.report_id ) " ",
m.label,
s.report_name,
s.application_user
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user :APP_USER
AND ( s.page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY m.label,
s.report_name,
s.application_user
Each row has a checkbox to select the setting(s) that you would like to import from the repository.
The region has one button called IMPORT that when pressed will import the selected settings.
It does this by using the 2 above mentioned package procedure to create a new saved report for you
with the information form the repository. Be careful to match the right column with the right procedure
parameter and to 'reverse' any DECODEs that the view has.
- Region 2 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY page_name,
report_name
This is only needed to give you some feedback as to whether the import succeeded.
A few proviso's:-
a) I'm sure there's a better way to do all this but this works for me :-)
b) This does not work for Computations! I have not found an API call to create computations.
They will simply not come across into the repository.
c) If you import the same settings twice I've made it so that the name is suffixed with (2), (3) etc.
I did not find a way to update existing report settings. You can only create new ones.
d) Make sure you refer to your saved reports by name, not ID, when matching APEX stored reports and the
reports in your repository as the ID numbers may change if you re-import an application or if you
auto-generate your screens/reports (as I do).
Ruud
>
To me this is a bit too much of a hack and I personally wouldn't implement it - it's just an example to show it can be done.
Also if you look here in the help in APEX Home > Adding Application Components > Creating Reports > Editing Interactive Reports
...and go to the last paragraph, you can embed predicates in the URL.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Edited by: Munky on Jul 30, 2009 8:03 AM

How to make iPhotos library available to other users

how to make iPhotos library available to other users

To give others selective access to your iPhoto library, you have the option of using iCloud Photo Sharing, if the privacy implications don't bother you. The images will be stored temporarily on Apple servers.
If you want to give full read/write access to more than one user, see the support article linked below.
iPhoto: Sharing libraries among multiple users
There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

How to make users to select the date from calendar control my making the date field read only in date time control in external list in sharepoint 2010

How to make users to select the date from calendar control only, by my making the date text field read only (don't want to let users type the date) in date time control in external list in sharepoint 2010. I am looking for a solution which can
be done through sharepoint desginer / out of the box.
thanks.

Congratulate you got the solution by yourself. I am new to a
WinForms calendar component, I feel so helpless on many problems even I'd read many tutorials. This question on the
calendar date selection did me a great favor. Cheers.

How to make a service available at boot.

Can someone tell me how to make a service available at boot time via smf ? The question is for a generic service ( network/telnet for example ) and for a site one.
Is it enough to enable it via svcadm ?
Thanks.

yeah all you need to do is
svcadm enable /network/telnet
this will enable the service then and next time when you boot the system
(or i.e. svcadm disable apache2 if you want to disable the httpd)
have you tried man on svcadm?
Sharif

How to make Scroll viewer zoom disable

how to make Scroll viewer zoom disable in windows store app

Hi Imtiyazk,
Thanks for sharing the solution, should help others have the same issue.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to make Steam library available for all users

Hello!
Can someone tell me - how to make my Steam library available to ALL users of my iMac without sharing a password?
Or any other program of my account?

Hard drive level Users/Sharing - Do a Get Info on the folder (command - I) and set permissions to everyone read/write, then click the gear at the bottom - Apply to Enclosed Items.

How to make Help view well on both laptops and desktops

Hi -- I'm trying to learn RoboHelp 7 and just created my first WebHelp project. I want to show it to a friend, but don't have a server I can publish it to, so I copied all the files onto my flash drive and put it on my laptop. It all works fine, which is a relief -- however, the custom colors are way off, and some of the screenshots are now too big, so the user would have to scroll (which can be annoying). I created it on my desktop and have been looking at it on a larger monitor (1680x1050), but the laptop is old (1024x768). The thing is, a lot of people might have to view it on 800x600.
I couldn't find any information in RH's Help about how I should have set it up so that it views well on different systems. I'm hoping someone could please advise me as to what I should have done, and if there's anything I can do now to fix it, or point me to some information. I used Arial 10 pt for the text, and now it looks 12 pt. Should I have made it 8 pt? Is there a rule for how large an image should be to be viewed on a laptop and a desktop?
One last thing, it's too large to put on a CD, so is does anyone know how to make this into an executable?
Thanks in advance for any help you can give!
Daryl

Hi Daryl
I use an eBook compiler to convert WebHelp to an executable file. You might investigate eBook compilers for that bit. However, I'm not sure how that would help you since a compiler will do little more than to take a swarm of WebHelp files and store them in a wrapper to create a single file. Generally you will end up with something that although it exists as a single file, is larger than what is inside.
Are you SURE it's too big for CD? CD will hold 650 megs (700 if you buy the extended types).
On the screen size issue WebHelp itself should adapt fine. Probably it's the images you are concerned with. And the general rule of thumb is to capture images at a reasonable size to begin with. Never EVER just insert a big ole image into RoboHelp and grab the sizing handle to make it smaller. It will still consume a larger amount of space and the quality will suffer badly. So the best approach is to copy the image at a reasonable size to begin with. Something that may fit nicely in the Topic Pane area as it is presented in the space provided by the lowest common denominator. In your case I believe you said that many are still at 800x600.
Your 10 point text will still be 10 points at a smaller resolution. It will just look a bit different.
Hopefully this helps... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

How to make database instances available in the SAP MMC

Hello,
I have been trying to figure out on how to make a database instance, which I installed on the MSSQL Server, available in the SAP Management Console in order to start the instance. I am able to view the instance over the Enterprise Manager of the MSSQL Sever, but I cannot start it from there (this is only possible from the SAP MMC). I have the SAP MMC installed on my computer, but just cannot figure out on how to control the instance from there because I cannot see it.
I hope someone can help me on this matter!
Thanks....
Katharina

Hello Katharina,
Run SAP MMC and right-click to SAP R/3 Systems.
Choose properties and go to Fixed tab.
In 'System' field enter Your SID (e.g. EBP)
In 'Instance' field enter hostname<space>instance number (e.g. epb01 10) Remember, there is space between ebp01 and 10.
Click on 'Add' button and then OK.
Best Regards,
Marcin Gajewski

How to make business content available for reporting

The business content is loaded.The version is 3.5.3 SP2 which we have and BW version is 3.5
I can see the business content going thru RSA1 for e.g for Sales 0SD_O01 etc
Now how can i make the content available for reporting.When I go in modeling and click on infoprovider, infoobject it doesnt show me anything.Its blank.
Do i have to connect R/3 to BW for reporting or load data to BW from R/3 and do reporting.Why the content is not showing in modeling?How can i make it available for reporting

Hi,
First you need to install the Businesscontent object first...right side window in the business content will give you the option.once it is installed then u can view it in modeling then load data and do reporting...
If you need any details..feel free to post..If u satisfied upto some level..exibhit it by awarding points..

How to make Hierarchy view fixed in marketing plan .

Hi Gurus,
I have a requirement to make the Hierarchy view as fixed ie To remove the toggel functionality .
Component MPL_MAIN .
for which
I removed the toggel button and make the view visible all the times .
I have removed the button by commenting the code .
but I am not sure how can I make the view always visible ?
I can understand that i have to use the same code as the toggel event 'ONTOGGLEHIERARCHY'is using ,
but where should I be putting that code so that it takes the Hierarchy view at the time of initial loading .
Thanks ,
Naval Bhatt.

Hi Naval,
you can try putting this into the "DO_PREPARE_OUTPUT" Method of the Overview-View.
Regards
Dennis

How to make a particular field editable in a Form/Empty View

Hi All,
I want make a particular field editable in a Form View. Means i have 5 fields in the Form View and out of 5 fields i want to make one field editable or input field. Can you plz tell me how to do that?
thanks & regards
Madhusudan

Hi,
You can achieve the same by two methords.
1) Goto configuration of the view in which you want to make fields editable/ non editable. Click on your field. Click on field properties. On the menu you can click on Display only. It will make your field non editable. If you remove the check, it will be editable.
2) Goto Get_I_fieldname methord of your field. There write code rv_disable= 'FALSE'. Field will become editable. rv_disable= 'TRUE' will make field non editable.
Best regards
Pankaj Kumar

How to make some computers available on the Internet? Remote Desktop.

We have 12 computers (VMs) that are used for training. They are configured with the software to be trained on and are set up just the way we want them. We are looking for a way that we can make these computers available to the internet so that someone can Remote into the VMs to go through some training courses. We do need to be able to control who can get onto these machines so we don't have random people logging into them. We handle training through a GotoTraining type system and would provide a link to each of the attendees.Does anyone know if a way to do this?It could be as simple as a list of 12 links that we tell each person to click a link. It could be as fancy as having the person click the link and having them put into any machine that doesn't already have someone in it.This could involve installing some sort of 3rd party...
This topic first appeared in the Spiceworks Community

Hi,
Beforing answering your Q....How the dashboard will get the data....how it will display??
See to diplay any Grid,charts,bar..... it need to fetch the data from the database servers that means if your in netcafe also .......it need to be connected to the netwrok were it can fetch the data from.
so having the link is not sufficient ....... you need to have the authorization to the xMIIserver from Net cafe.
Regards,
Phani

How to Make Wage Types Available in Drop Down

Hi,
I need to make a particular wage type available for a particular Infotype(14,15 to be precise.).
I tried entering using the v_t512z maintenance. In that when I entered (actually copied from an existing WT), it gave an error that key already exists.
Now, I would like to know is this the way to make a WT visible in drop down of IT0014/15 ?
Answers would be appriciated.
Thanks,
Vivek

Hi sarika, amit, and santosh..
Your answers were quite helpful. but my situation is still unanswered :(.
The thing is that a particular WT(WT1) is present for a particular molga(M1). Now I need to make this WT1 available in the drop down for another molga(M2).
When I went in view maintenence of V_52D7_B, for molga M1, it showed the existence of the WT, but when I was in molga M2, and the same wage type group(14/15) and copied an existing wage type, and renamed it to what I want, it gave an error saying that this wage type doesnt exist.
I hope I have made my problem a bit more clear. I would appriciate if any of u can tell me what am I missing in my process.
Is it that I need to create a wage type for molga M2 and only then what I am trying to do is possible?
Being a rookie in the field, please do not mind my basic querries.
Regards,
Vivek

How to make OBIEE reports available during the DB tables data refresh?

Experts,
We have our production ETL run for 2.5 days every month. OBIEE reports will not be available during the run. We have a requirement to make the reports available all 24 hrs 365 days. So, what we are trying is to copy all the fact/Dim tables to the new schema running in the same or different DB server and amend the connection pool to point this schema during the run. Here are my questions. Is this a workabale solution (or) is there better approach for meeting our requirement
Regards,
Sarvan

I would suggest this option:
Store the following connection pool values in a table and call them in your connection pool using Connection Pool Scripts
Data Source Name
User ID
Pwd
when ever you want to change db just you need to edit these values that would help your bi with no downtime.
You might have to tweak it little bit if needed.
More or less we have use sometime back to a client where they want to switch dbs dev to test to etc
Try it out.
BTW: 2.5 days load time for Full load or Incr?
Edited by: Srini VEERAVALLI on Feb 1, 2013 8:40 AM

How to make user view available in an workitem form

Similar Messages

Maybe you are looking for