How to manage scrolling in Table Control

Hi,
I have one scenario in which i have one table control in that one column contains check boxes. After i check, some check boxes in some rows and press scrolling button means the selection previously made goes off. I want the selection remains selected.
Please any one suggest me how to manage this.
Regards,
Mithun.

Your PAI flow logic should be following this type of structure:
process after input.
module at_exit_command at exit-command. "don't exit here if you want TC data changes
module d9999_before_tc.
loop with control tc_9999.
    chain.
      field:
        gs_9999_tc-sel,
        gs_9999_tc-checkbox.
      module d9999_line_tc_handler. "hold onto TC row data in here
    endchain.
endloop.
module d9999_user_command.
module d9999_pai_scroll. "scroll the table control
As noted above, you need to catch the values of your checkboxes within the loop / endloop for the table control, and do any scrolling after this.
Jonathan

Similar Messages

How to control manually the scrolling of Table Control?

Hi,
I have one selection screen which takes me to the next screen (Screen 2) having a table control.In this screen I have some buttons like display, change etc ,by clicking on which it goes to the third screen.Now my problem is even when I try to vertically scroll this table control it is taking me to the third screen which I do not want to happen. Could anyone please help me in this.
Thanks in advance.

In PBO write the following code for scrolling
*& Module set_lines OUTPUT
text
MODULE SET_LINES OUTPUT.
DATA VLINES TYPE I.
DESCRIBE TABLE ITABCTL LINES VLINES.
TABCTL-LINES = VLINES + 1.
ENDMODULE. " set_lines OUTPUT
This is code for vertical scrollin..
Howevr check ur ok-codes..
Hope dis helps...
reward if it does..

How to populate data in table control .

hi all,
i put matnr no. in screen no. 103
validation is done at that screen only.
now when i want to modify dat record
when i put matnr no. at screen 103
so how i will get all data of dat number to table control screen.

Hi Darshan,
Here is a detailed description of how to update data in table controll.
Updating data in table control
The ABAP language provides two mechanisms for loading the table control with data from the internal table and then storing the altered rows of the table control back to the internal table.
Method 1: Read the internal table into the Table Control in the screenu2019s flow logic. Used when the names of the Table Control fields are based on fields of the internal table.
Method 2: Read the internal table into the Table Control in the module pool code. Used when the names of the Table Control fields are based on fields of the database table.
Method 1 (table control fields = itab fields)
In the flow logic we can read an internal table using the LOOP statement. Define the reference to the relevant able control by specifying WITH CONTROL <ctrl>
Determine which table entry is to be read by specifying CURSOR <ctrl>-CURRENT_LINE.
After the read operation the field contents are placed in the header line of the internal table. If the fields in the table control have the same name as the internal they will be filled automatically. Otherwise we need to write a module to transfer the internal table fields to the screen fields.
We must reflect any changes the user makes to the fields of the table control in the internal table otherwise they will not appear when the screen is redisplayed after PBO processing, (eg, after the user presses Enter or scrolls) However, this processing should be performed only if changes have actually been made to the screen fields of the table control (hence the use of the ON REQUEST)
PROCESS BEFORE OUTPUT.
LOOP AT ITAB_REG WITH CONTROL TCREG
CURSOR TCREG-CURRENT_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
MODULE MODIFY_ITAB_REG.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2 (table control fields = dict. fields)
If using a LOOP statement without an internal table in the flow logic, we must read the data in a PBO module which is called each time the loop is processed.
Since, in this case, the system cannot determine the number of internal table entries itself, we must use the EXIT FROM STEP-LOOP statement to ensure that no blank lines are displayed in the table control if there are no more corresponding entries in the internal table.
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TCREG.
MODULE READ_ITAB_REG.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG
ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE READ_ITAB_REG OUTPUT.
READ TABLE ITAB_REG INDEX TCREG-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING ITAB_REREG TO TCREG.
ELSE.
EXIT FROM STEP-LOOP.
ENDIF.
ENDMODULE.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
MODIFY ITAB_REG INDEX
TCREG-CURRENT_LINE.
ENDMODULE.
Updating the internal table
Method 1
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: TCREG-REG,
TCREG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Updating the database
MODULE USER_COMMAND_100.
CASE OK_CODE.
WHEN u2018SAVEu2019.
LOOP AT ITAB-REG.
CHECK ITAB_REG-MARK = u2018Xu2019.
MOVE-CORRESPONDING ITAB_REG TO TCREG.
UPDATE TCREG.
ENDLOOP.
WHEN u2026
u2026
ENDCASE.
ENDMODULE.
Hope this will solve your problem.
Regards,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Aug 3, 2009 12:48 PM

How to transfer data in table control in bdc

hi
how to transfer data in table control in bdc . I need the theory regarding this
bye

Hi,
just check in the forum , there is many threads available to ur questions.
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
You can even refer to these related threads
bdc table control
Re: table control in bdc
table control in BDC
Reward if helpful.
Thanks
Naveen khan

How to insert data into table control

hi experts,,
i have inserted data into data base table through table control .
now i want to insert data into table control through database table.
how to delete data from table control for selected row

Hi
go through this link.
http://www.****************/Tutorials/ABAP/TableControl/Demo.htm

How to bring cursor in Table control??

Hi to all
How to bring cursor in Table control when entering into screen
can anyone tell me??? pls explain with example..
thanks
senthil

Hi,
Check the below code
data l_tc_name             like feld-name.
data l_tc_field_name       like feld-name.
get actual tc and column
get cursor field l_tc_field_name
             area l_tc_name.
Regards,
Vind

How to disable fields in Table control???

Hi
How to disable fields in Table control??? I want to disable particular row in table control when enter datas are correct.lets take as example ME41 or ME51 table control.
Can anyone tell how to do disable in this table control
Points will be rewarded if its helpful.
Thanks
senthil

If you want to disable the row then you can use
in pbo module create a module in side loop,
loop at itab with control tc.
module change_screen.
endloop.
in module,,,,,
loop at screen.
if condition.
screen-input = 0.
modify screen.
endif.
endloop.
Regards
Vijay

Hi All, How we can handle a table control in bdc - in detail its urgent pls

Hi All, How we can handle a table control in bdc - in detail its urgent. Please send me the explanation in detail.
Thanks&regards.
Bharat

hi,
Create Table Control
Step 1 (Create new structure for table control)
Type is name of structure (ZTC_EKKO) and press create
Step 2 (Create Program)
Goto transaction SE80(Object Navigator) -> Repository Browser -> Program.
Enter your program name, please ensure that is begins with SAPMZ as this is a module pool (dialog program).
Press enter to create, and press yes!
Ensure that you create a top include, and press Enter.
Accept the name created for the top include.
Press Enter.
Press Save
Step 3 (Create TOP include)
Double click on the top include and enter following ABAP code:
Tables: ZTC_EKKO.
controls: tc100 type tableview using screen 100.
data: ok_code type sy-ucomm.
data: it_ekko type standard
table of ZTC_EKKO initial size 0,
wa_ekko type ZTC_EKKO.
data: ok_code type sy-ucomm.
Press Save and Activate
Step 4 (Create screen)
Right click the program to create a screen 100 for the dialog. Enter Short description, set screen type to Normal and enter 0 or blank into Next screen. Then move to Element List tab and enter the OK code as OK_CODE (i.e. the same as what you declared in the top include with data: ok_code type sy-ucomm).
Step 5 (Create table control)
Press the Layout button to bring up the screen painter editor.
Press table control button and drag it on to the screen, enter the name of table control created in TOP include (TC100). Now press the yellow button for attributes and set the table control as below options
Step 6 (Populate table control )
Press the orange button (Fields). On the next screen enter ZTC_EKKO and press the Get from Dict button. Select the fields you want (all) and press enter. Now drag them onto your Table Control.
Below is the result, there will been syntax errors if we check now! So Save and go back into the flow logic tab.
Step 7 (Create flow control )
Within the flow logic of screen 100 and create two modules, one to select the data from the database and the other to move the selected fields into the table control. Also insert the two loop statements to populate and retrieve the lines of the table control.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
module data_retrieval.
loop at it_ekko into wa_ekko with control TC100.
module populate_screen.
endloop.
PROCESS AFTER INPUT.
loop at it_ekko.
endloop.
MODULE USER_COMMAND_0100.
Double click the module data_retrieval to create and click yes to get past the popup. Ensure that a new include is created to hold all the PBO modules (default). Press enter.
Select 10 rows of data from the EKKO table and load into the internal table it_ekko. Go back to the flow logic to load this data into the Table Control.
check this one
REPORT ZCALL_TRANS_TAB1 .
TABLES: LFA1,LFBK,lfb1.
data: BEGIN OF it_vendor occurs 0,
LIFNR LIKE LFA1-LIFNR,
bukrs like lfb1-bukrs,
END OF it_vendor.
DATA: BEGIN OF IT_BANK occurs 0,
LIFNR LIKE LFA1-LIFNR,
BANKS LIKE LFBK-BANKS,
BANKL LIKE LFBK-BANKL,
BANKN LIKE LFBK-BANKN,
koinh like lfbk-koinh,
END OF IT_BANK.
data: it_bdcdata like bdcdata occurs 0 with header line.
data: it_messages like bdcmsgcoll occurs 0 with header line.
*selection screen.
selection-screen: begin of block b1 with frame.
parameters: p_file like rlgrap-filename default 'c:/vendor.txt'
obligatory.
parameters: p_file1 like rlgrap-filename default 'c:/xyz.txt'
obligatory.
selection-screen: end of block b1.
*at selection screen.
at selection-screen on value-request for p_file.
perform f4_help using p_file.
at selection-screen on value-request for p_file1.
perform f4_help1 using p_file1.
*start of selection
start-of-selection.
*******uploading file
perform upload_file using p_file P_FILE1.
******open session.
perform populate_data.
*& Form f4_help
form f4_help using p_p_file.
data: l_file type ibipparms-path.
call function 'F4_FILENAME'
importing
file_name = l_file.
p_file = l_file.
endform. " f4_help
*& Form POPULATE_DATA
form populate_data .
DATA: L_STRING TYPE STRing.
DATA: L_COUNTER(2) TYPE n.
loop at it_vendor.
perform bdc_dynpro using 'SAPMF02K' '0106'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-D0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
it_vendor-lifnr.
perform bdc_field using 'RF02K-BUKRS'
it_vendor-bukrs.
perform bdc_field using 'RF02K-D0130'
'X'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-bankn(03)'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
*********bank details
CLEAR l_COUNTER.
LOOP AT IT_BANK WHERE LIFNR = IT_VENDOR-LIFNR.
l_COUNTER = l_COUNTER + 1.
clear l_string.
CONCATENATE 'lfbk-banks(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-banks.
clear l_string.
CONCATENATE 'lfbk-bankl(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-bankl.
clear l_string.
CONCATENATE 'lfbk-bankn(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-bankn.
endloop.
******CALL TRANSACTION.
call transaction 'FK02' using it_bdcdata mode 'A'
messages into it_messages.
write:/ sy-subrc.
perform format_messages.
clear it_bdcdata.
refresh it_bdcdata.
endloop.
endform. " POPULATE_DATA
*& Form FORMAT_MESSAGES
form format_messages .
data: l_msg(100).
loop at it_messages.
call function 'FORMAT_MESSAGE'
exporting
id = it_messages-msgid
lang = sy-langu
no = it_messages-msgnr
v1 = it_messages-msgv1
v2 = it_messages-msgv2
v3 = it_messages-msgv3
v4 = it_messages-msgv4
importing
msg = l_msg
exceptions
not_found = 1
others = 2
write:/ l_msg.
endloop.
endform. " FORMAT_MESSAGES
*& Form bdc_dynpro
form bdc_dynpro using value(p_program)
value(p_screen).
it_bdcdata-program = p_program.
it_bdcdata-dynpro = p_screen.
it_bdcdata-dynbegin = 'X'.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_dynpro
*& Form bdc_field
form bdc_field using value(p_fnam)
value(p_fval).
it_bdcdata-fnam = p_fnam.
it_bdcdata-fval = p_fval.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_field
*& Form upload_file
form upload_file using p_p_file
p_p_file1.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_VENDOR
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
*******UPLOADING BANK DETAILS
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE1
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_BANK
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
endform. " upload_file
*& Form f4_help1
-->P_P_FILE1 text
form f4_help1 using p_p_file1.
data:l_file1 type ibipparms-path.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = l_file1.
p_file1 = l_file1.
endform. " f4_help1
http://sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
Sankar

How to create bdc with table control

hi all.
please some body tell me how to create bdc with table control
or suggest any www with screen shots
thanks in advance ,
aparna

Hi AParna,
Its very Simple.
ALl you have to do is set up a counter based on the number of lines in the tabke. when the counter reaches the number of lines in the table hit the next page button which is at the top of every screen in SAP.
Please refer to the following BDC program I had developed using Table control,
this is for ME01 transaction.
LOOP AT T_EORD_HED.
    SELECT SINGLE * FROM MARA WHERE MATNR = T_EORD_HED-MATNR.
    IF SY-SUBRC = 0.
      PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0200'.
      PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                    'EORD-MATNR'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM BDC_FIELD       USING 'EORD-MATNR'
                                    T_EORD_HED-MATNR.       "'58335'.
      PERFORM BDC_FIELD       USING 'EORD-WERKS'
                                    T_EORD_HED-WERKS.       "'0253'.
      L_COUNT = 1.
      LOOP AT T_EORD WHERE MATNR = T_EORD_HED-MATNR
                       AND WERKS = T_EORD_HED-WERKS.
        SELECT SINGLE * FROM LFA1 WHERE LIFNR = T_EORD-LIFNR.
        IF SY-SUBRC = 0.
* Look into the if condition below
          IF L_COUNT = 010.
            L_COUNT = 1.
            PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0205'.
            PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'EORD-MATNR'.
            PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=NS'.
            L_COUNT = L_COUNT + 1.
          ENDIF.
          PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0205'.
          PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                        'EORD-AUTET(01)'.
          PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                        '/00'.
          CONCATENATE 'EORD-VDATU' '(' L_COUNT ')' INTO OPR_FIELD.
          WRITE SY-DATUM TO T_EORD-VDATU.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-VDATU.
          CONCATENATE 'EORD-BDATU' '(' L_COUNT ')' INTO OPR_FIELD.
          WRITE T_EORD-BDATU TO V_BDATU.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        V_BDATU.
          CONCATENATE 'EORD-LIFNR' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-LIFNR.
          CONCATENATE 'EORD-EKORG' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        '0001'.
          CONCATENATE 'EORD-RESWK' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-RESWK.
          WRITE T_EORD-MEINS TO V_MEINS.
          CONCATENATE 'EORD-MEINS' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        V_MEINS.
*          CONCATENATE 'EORD-EBELN' '(' L_COUNT ')' INTO OPR_FIELD.
*          PERFORM BDC_FIELD       USING 'OPR_FIELD'
*                                        T_EORD-EBELN.
          CONCATENATE 'EORD-EBELP' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-EBELP.
          IF T_EORD-FLIFN NE SPACE OR T_EORD-FRESW NE SPACE OR
             T_EORD-FEBEL NE SPACE.
            CONCATENATE 'RM06W-FESKZ' '(' L_COUNT ')' INTO OPR1_FIELD.
            PERFORM BDC_FIELD       USING OPR1_FIELD
                                          'X'.
          ENDIF.
          IF T_EORD-NOTKZ <> ''.
            CONCATENATE 'EORD-NOTKZ' '(' L_COUNT ')' INTO OPR_FIELD.
            PERFORM BDC_FIELD       USING OPR_FIELD
                                          'X'.
          ENDIF.
          CONCATENATE 'EORD-AUTET' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-AUTET.
          L_COUNT = L_COUNT + 1.
        ENDIF.
      ENDLOOP.
      PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                    'EORD-MATNR'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '=BU'.
      CALL TRANSACTION 'ME01' USING I_BDCDATA
                    MODE UP_MODE
*                     optIONS FROM l_opt
                    MESSAGES INTO I_BDCMSGCOLL.
      PERFORM FORMAT_OUTPUT.
    ENDIF.
ENDLOOP.

Unable get the table scroll for table control

hai
i unable get horizontal scrolling for table control when the output is dislayed
help me
very urgent

Hi,
check out the sample program it might help you
See the following simple ex
*& Module pool ZTEST_TBLCTRL
PROGRAM ZTEST_TBLCTRL.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'TC1'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES: ZFG_SRNO, ZFIH0004.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'TC1'
*TYPES: BEGIN OF T_TC1,
ZSRNO LIKE ZFG_SRNO-ZSRNO,
SCRNAME LIKE ZFIH0004-SCRNAME,
END OF T_TC1.
*TYPES: BEGIN OF T_TC1.
STRUCTURE ZFG_SRNO.
END OF T_TC1.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'TC1'
*DATA: G_TC1_ITAB TYPE T_TC1 OCCURS 0 WITH HEADER LINE,
G_TC1_WA TYPE T_TC1. "work area
DATA: G_TC1_ITAB LIKE ZFG_SRNO OCCURS 0 WITH HEADER LINE,
G_TC1_WA LIKE G_TC1_ITAB. "work area
DATA: G_TC1_COPIED. "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'TC1' ITSELF
CONTROLS: TC1 TYPE TABLEVIEW USING SCREEN 0100.
*&SPWIZARD: LINES OF TABLECONTROL 'TC1'
DATA: G_TC1_LINES LIKE SY-LOOPC.
DATA: OK_CODE LIKE SY-UCOMM,
S_CODE LIKE SY-UCOMM,
MARK.
DATA: T1(10).
*&SPWIZARD: OUTPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE TC1_INIT OUTPUT.
IF G_TC1_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'ZFG_SRNO'
*&SPWIZARD: INTO INTERNAL TABLE 'g_TC1_itab'
SELECT * FROM ZFG_SRNO
INTO CORRESPONDING FIELDS
OF TABLE G_TC1_ITAB.
G_TC1_COPIED = 'X'.
REFRESH CONTROL 'TC1' FROM SCREEN '0100'.
IF T1 <> SPACE.
G_TC1_ITAB-ZSRNO = T1.
CLEAR T1.
APPEND G_TC1_ITAB.
REFRESH CONTROL 'TC1' FROM SCREEN '0100'.
ENDIF.
*TC1-TOP_LINE = 1.
ENDIF.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE TC1_MOVE OUTPUT.
MOVE-CORRESPONDING G_TC1_WA TO ZFG_SRNO.
if sy-subrc ne 0.
*append G_TC1_WA to G_TC1_ITAB.
*endif.
READ TABLE G_TC1_ITAB INDEX TC1-CURRENT_LINE.
IF SY-SUBRC = 0.
G_TC1_WA-ZSRNO = G_TC1_ITAB-ZSRNO.
ENDIF.
MOVE-CORRESPONDING G_TC1_ITAB TO ZFG_SRNO.
REFRESH CONTROL 'TC1' FROM SCREEN '8001'.
*******Below line is the logic for scrolling.
tc1-lines = G_TC1_LINES + 100.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: GET LINES OF TABLECONTROL
MODULE TC1_GET_LINES OUTPUT.
G_TC1_LINES = SY-LOOPC.
ENDMODULE.
*&SPWIZARD: INPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MODIFY TABLE
MODULE TC1_MODIFY INPUT.
*break-point.
MOVE-CORRESPONDING ZFG_SRNO TO G_TC1_ITAB.
MODIFY G_TC1_ITAB INDEX TC1-CURRENT_LINE.
G_TC1_COPIED = 'X'.
REFRESH CONTROL 'TC1' FROM SCREEN '8001'.
MOVE-CORRESPONDING ZFG_SRNO TO G_TC1_WA.
MODIFY G_TC1_ITAB
FROM G_TC1_WA
INDEX TC1-CURRENT_LINE.
G_TC1_COPIED = 'X'.
if sy-subrc ne 0.
append G_TC1_WA to G_TC1_ITAB.
endif.
*modify G_TC1_ITAB INDEX TC1-CURRENT_LINE.
ENDMODULE.
*&SPWIZARD: INPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: PROCESS USER COMMAND
MODULE TC1_USER_COMMAND INPUT.
OK_CODE = SY-UCOMM.
PERFORM USER_OK_TC USING 'TC1'
'G_TC1_ITAB'
'FLAG'
CHANGING OK_CODE.
SY-UCOMM = OK_CODE.
ENDMODULE.
INCLUDE TABLECONTROL_FORMS *
*& Form USER_OK_TC *
FORM USER_OK_TC USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME
P_MARK_NAME
CHANGING P_OK LIKE SY-UCOMM.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA: L_OK TYPE SY-UCOMM,
L_OFFSET TYPE I.
&SPWIZARD: END OF LOCAL DATA----
*&SPWIZARD: Table control specific operations *
*&SPWIZARD: evaluate TC name and operations *
SEARCH P_OK FOR P_TC_NAME.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
L_OFFSET = STRLEN( P_TC_NAME ) + 1.
L_OK = P_OK+L_OFFSET.
*&SPWIZARD: execute general and TC specific operations *
CASE L_OK.
WHEN 'INSR'. "insert row
PERFORM FCODE_INSERT_ROW USING P_TC_NAME
P_TABLE_NAME.
CLEAR P_OK.
WHEN 'DELE'. "delete row
PERFORM FCODE_DELETE_ROW USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME.
CLEAR P_OK.
WHEN 'P--' OR "top of list
'P-' OR "previous page
'P+' OR "next page
'P++'. "bottom of list
PERFORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
L_OK.
CLEAR P_OK.
WHEN 'L--'. "total left
PERFORM FCODE_TOTAL_LEFT USING P_TC_NAME.
WHEN 'L-'. "column left
PERFORM FCODE_COLUMN_LEFT USING P_TC_NAME.
WHEN 'R+'. "column right
PERFORM FCODE_COLUMN_RIGHT USING P_TC_NAME.
WHEN 'R++'. "total right
PERFORM FCODE_TOTAL_RIGHT USING P_TC_NAME.
WHEN 'MARK'. "mark all filled lines
PERFORM FCODE_TC_MARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
CLEAR P_OK.
WHEN 'DMRK'. "demark all filled lines
PERFORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
CLEAR P_OK.
WHEN 'SASCEND' OR
'SDESCEND'. "sort column
PERFORM FCODE_SORT_TC USING P_TC_NAME
l_ok.
ENDCASE.
ENDFORM. " USER_OK_TC
*& Form FCODE_INSERT_ROW *
FORM fcode_insert_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_LINES_NAME LIKE FELD-NAME.
DATA L_SELLINE LIKE SY-STEPL.
DATA L_LASTLINE TYPE I.
DATA L_LINE TYPE I.
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_LINES_NAME.
ASSIGN (L_LINES_NAME) TO <LINES>.
*&SPWIZARD: get current line *
GET CURSOR LINE L_SELLINE.
IF SY-SUBRC <> 0. " append line to table
L_SELLINE = <TC>-LINES + 1.
*&SPWIZARD: set top line *
IF L_SELLINE > <LINES>.
<TC>-TOP_LINE = L_SELLINE - <LINES> + 1 .
ELSE.
<TC>-TOP_LINE = 1.
ENDIF.
ELSE. " insert line into table
L_SELLINE = <TC>-TOP_LINE + L_SELLINE - 1.
L_LASTLINE = <TC>-TOP_LINE + <LINES> - 1.
ENDIF.
*&SPWIZARD: set new cursor line *
L_LINE = L_SELLINE - <TC>-TOP_LINE + 1.
*&SPWIZARD: insert initial line *
INSERT INITIAL LINE INTO <TABLE> INDEX L_SELLINE.
<TC>-LINES = <TC>-LINES + 1.
*&SPWIZARD: set cursor *
SET CURSOR LINE L_LINE.
ENDFORM. " FCODE_INSERT_ROW
*& Form FCODE_DELETE_ROW *
FORM fcode_delete_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME
P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: delete marked lines *
DESCRIBE TABLE <TABLE> LINES <TC>-LINES.
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
IF <MARK_FIELD> = 'X'.
DELETE <TABLE> INDEX SYST-TABIX.
IF SY-SUBRC = 0.
<TC>-LINES = <TC>-LINES - 1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " FCODE_DELETE_ROW
*& Form COMPUTE_SCROLLING_IN_TC
text
-->P_TC_NAME name of tablecontrol
-->P_OK ok code
FORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
P_OK.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TC_NEW_TOP_LINE TYPE I.
DATA L_TC_NAME LIKE FELD-NAME.
DATA L_TC_LINES_NAME LIKE FELD-NAME.
DATA L_TC_FIELD_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_TC_LINES_NAME.
ASSIGN (L_TC_LINES_NAME) TO <LINES>.
*&SPWIZARD: is no line filled? *
IF <TC>-LINES = 0.
*&SPWIZARD: yes, ... *
L_TC_NEW_TOP_LINE = 1.
ELSE.
*&SPWIZARD: no, ... *
CALL FUNCTION 'SCROLLING_IN_TABLE'
EXPORTING
ENTRY_ACT = <TC>-TOP_LINE
ENTRY_FROM = 1
ENTRY_TO = <TC>-LINES
LAST_PAGE_FULL = 'X'
LOOPS = <LINES>
OK_CODE = P_OK
OVERLAPPING = 'X'
IMPORTING
ENTRY_NEW = L_TC_NEW_TOP_LINE
EXCEPTIONS
NO_ENTRY_OR_PAGE_ACT = 01
NO_ENTRY_TO = 02
NO_OK_CODE_OR_PAGE_GO = 03
OTHERS = 0.
ENDIF.
*&SPWIZARD: get actual tc and column *
GET CURSOR FIELD L_TC_FIELD_NAME
AREA L_TC_NAME.
IF SYST-SUBRC = 0.
IF L_TC_NAME = P_TC_NAME.
*&SPWIZARD: et actual column *
SET CURSOR FIELD L_TC_FIELD_NAME LINE 1.
ENDIF.
ENDIF.
*&SPWIZARD: set the new top line *
<TC>-TOP_LINE = L_TC_NEW_TOP_LINE.
ENDFORM. " COMPUTE_SCROLLING_IN_TC
*& Form FCODE_TC_MARK_LINES
marks all TableControl lines
-->P_TC_NAME name of tablecontrol
FORM FCODE_TC_MARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME.
&SPWIZARD: EGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: mark all filled lines *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
<MARK_FIELD> = 'X'.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
*& Form FCODE_TC_DEMARK_LINES
demarks all TableControl lines
-->P_TC_NAME name of tablecontrol
FORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: demark all filled lines *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
<MARK_FIELD> = SPACE.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
*& Module D20XX_INIT OUTPUT
text
MODULE D20XX_INIT OUTPUT.
*if screen-name = 'ZSRNO'.
SCREEN-INPUT = 0.
SCREEN-COLOR = 0.
MODIFY SCREEN.
endif.
ENDMODULE. " D20XX_INIT OUTPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
*CLEAR R1_REF.
DO 30 TIMES.
APPEND G_TC1_ITAB.
ENDDO.
DESCRIBE TABLE G_TC1_ITAB LINES TC1-LINES.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module TAB1_INIT OUTPUT
text
MODULE TAB1_INIT OUTPUT.
ENDMODULE. " TAB1_INIT OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module MESSAGE INPUT
text
MODULE MESSAGE INPUT.
OK_CODE = SY-UCOMM.
S_CODE = OK_CODE.
CLEAR OK_CODE.
if S_CODE = 'DELE'.
loop at G_TC1_ITAB.
if G_TC1_ITAB-scrname = 'X'.
delete g_tc1_itab.
endif.
endloop.
ELSEIF S_CODE = 'SAVE'.
G_TC1_WA-ZSRNO = T1.
MOVE-CORRESPONDING G_TC1_WA TO ZFG_SRNO.
REFRESH CONTROL 'TC1' FROM SCREEN '0100'.
ENDIF.
ENDMODULE. " MESSAGE INPUT
*& Module DELETE_RECORD INPUT
text
MODULE DELETE_RECORD INPUT.
IF MARK = 'X' AND S_CODE = 'DELE'.
DELETE TABLE G_TC1_ITAB FROM ZFG_SRNO.
DESCRIBE TABLE G_TC1_ITAB LINES TC1-LINES.
ENDIF.
ENDMODULE. " DELETE_RECORD INPUT
*********************Screen modules*********************
PROCESS BEFORE OUTPUT.
*&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'TC1'
MODULE TC1_INIT.
*&SPWIZARD: MODULE TC1_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TC1_CHANGE_COL_ATTR.
LOOP AT G_TC1_ITAB
INTO G_TC1_WA
WITH CONTROL TC1
CURSOR TC1-CURRENT_LINE.
*&SPWIZARD: MODULE TC1_CHANGE_FIELD_ATTR
MODULE TC1_MOVE.
MODULE TAB1_INIT.
MODULE TC1_GET_LINES.
ENDLOOP.
MODULE D20XX_INIT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'TC1'
*BREAK POINT.
LOOP AT G_TC1_ITAB.
CHAIN.
FIELD ZFG_SRNO-ZSRNO.
MODULE TC1_MODIFY ON CHAIN-REQUEST.
MODULE TC1_MODIFY.
ENDCHAIN.
MODULE MESSAGE .
MODULE DELETE_RECORD.
ENDLOOP.
MODULE TC1_USER_COMMAND.
*&SPWIZARD: MODULE TC1_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TC1_CHANGE_COL_ATTR.
MODULE USER_COMMAND_0100.
please check out the link below for more information it might help you
http://help.sap.com/saphelp_sm32/helpdata/en/9f/dbac9f35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801c7b454211d189710000e8322d00/content.htm
http://www.sapbrainsonline.com/REFERENCES/ABAP_SYNTAX/SAP_ABAP_SYNTAX.html
*********please reward points if the information is helpful to you*************

How can i extend the table control while transfering the data

hi
how can i extend the table control while transfering the data.

Hi,
For table control we have to handle the page down (P+, or what ever function codes are assigned to that activity) activity with our coding.
Just check out this code:
This is the bdc to update the XK01 transaction code (Vendor Creation).
Here we will use table controls for bankings. Here Iam sending the coding and text files.
Coding
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'. " Page down activity
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
**Flat files for the above code***
Intial screen data file.
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
Table control Data:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Kumar.

BDC: How to enter data in Table control (With wizard) using scrolling?

Using BDC, I am trying to enter the data in the table control (with wizard).
I want to know what is the specific command to scroll down in table control (With Wizard).
While recording I am getting these steps:
SAPLCKBASCR1     0202     X
               BDC_CURSOR     CKI94B-MATNR
               BDC_OKCODE     /00
When I use above command and run BDC, it does not scroll.
Kindly let me know where am I going wrong.
Thanks in advance for your kind help.
Ashish

The transaction is CK94
and the BDC recording is :
          T     CK94
SAPLCKBASCR1     0200     X
               BDC_CURSOR     CKI94A-BDATJ
               BDC_OKCODE     =ENTR
               CKI94A-MATNR     10000789
               CKI94A-WERKS     VA79
               CKI94A-BDATJ     2005
               CKI94A-MGTYP     ZDU01
SAPLCKBASCR1     0202     X
               BDC_CURSOR     CKI94B-MISCH_VERH(02)
               BDC_OKCODE     /00
               CKI94B-MIXCOST_PC(01)
               CKI94B-MIXCOST_PC(02)     X
               CKI94B-MISCH_VERH(01)
               CKI94B-MISCH_VERH(02)                    40
SAPLCKBASCR1     0202     X
               BDC_CURSOR     CKI94B-MATNR
               BDC_OKCODE     /00
SAPLCKBASCR1     0202     X
               BDC_CURSOR     CKI94B-MATNR
               BDC_OKCODE     /00
SAPLCKBASCR1     0202     X
               BDC_CURSOR     CKI94B-MISCH_VERH(07)
               BDC_OKCODE     /00
               CKI94B-MIXCOST_PC(07)
               CKI94B-MISCH_VERH(07)                    60
SAPLCKBASCR1     0202     X
               BDC_CURSOR     CKI94B-MATNR
               BDC_OKCODE     /00
SAPLCKBASCR1     0202     X
               BDC_CURSOR     CKI94B-MATNR
               BDC_OKCODE     /00
SAPLCKBASCR1     0202     X
               BDC_CURSOR     CKI94B-MATNR
               BDC_OKCODE     =STOR
BDC_OKCODE '/00' is recorded when I scroll down in the table control.
Thanks for your kind concern.
Ashish

How can I get the table control up arrow or down arrow SCROLL OK_CODE?

Dear All,
I want get the table control up or down Scroll OK_CODE (not button, is arrow click), But I debugged have not found when I click the up or down scroll.
Please give me some help.
Thanks

Hi Sun,
PBO..
                           Loop with control T1.
                   module get_Looplines.
                Endloop.
                    Module get_looplines.
                      Looplines = sy-loopc.      "<< by using this you can get the scroll bar...
                    Endmodule.
if you wan the ok_code for scroll bar in table control...
the ok_code is not generated for scroll bar..
but if you do not clear the ok_code in PBO it will carries the ok_code when ever you press scroll bar up and down...same ok_code is repeated..
Regards,
Prabhudas

How can we get a Scrolling in Table Control while data uploading?.

Can anybody suggest me the way to put a scrolling in a table control while uploading the data?

Hello,
I dont think it is possible, anyways dont do it. It will make the program perfomance very bad. There is an indicator (little watch on the left hand side), that you can use, but it is better to dont do it. As I have told you the perfomance will be very bad.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      percentage = 20
      text       = 'Uploading data'.
THAT IS THE FM. Use it after and before the upload.
Hope this helps
Gabriel

How to view lines in table control after pressing vertical scroll bar

Hi Experts,
I created table control in MPP, While design my layout I design table control with 12 lines(Fixed), But I am moving my internal table values to table control. my internal table have more then 12 lines. My problem is I cant view my 13, 14th line in table control. Could you help me in solve this issue?

Please make sure that you have used the following code in the PBO
DESCRIBE TABLE it_tab LINES tab_ctrl-lines.

How to manage scrolling in Table Control

Similar Messages

Maybe you are looking for