How to create bdc with table control

hi all.
please some body tell me how to create bdc with table control
or suggest any www with screen shots
thanks in advance ,
aparna

Hi AParna,
Its very Simple.
ALl you have to do is set up a counter based on the number of lines in the tabke. when the counter reaches the number of lines in the table hit the next page button which is at the top of every screen in SAP.
Please refer to the following BDC program I had developed using Table control,
this is for ME01 transaction.
LOOP AT T_EORD_HED.
    SELECT SINGLE * FROM MARA WHERE MATNR = T_EORD_HED-MATNR.
    IF SY-SUBRC = 0.
      PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0200'.
      PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                    'EORD-MATNR'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM BDC_FIELD       USING 'EORD-MATNR'
                                    T_EORD_HED-MATNR.       "'58335'.
      PERFORM BDC_FIELD       USING 'EORD-WERKS'
                                    T_EORD_HED-WERKS.       "'0253'.
      L_COUNT = 1.
      LOOP AT T_EORD WHERE MATNR = T_EORD_HED-MATNR
                       AND WERKS = T_EORD_HED-WERKS.
        SELECT SINGLE * FROM LFA1 WHERE LIFNR = T_EORD-LIFNR.
        IF SY-SUBRC = 0.
* Look into the if condition below
          IF L_COUNT = 010.
            L_COUNT = 1.
            PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0205'.
            PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'EORD-MATNR'.
            PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=NS'.
            L_COUNT = L_COUNT + 1.
          ENDIF.
          PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0205'.
          PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                        'EORD-AUTET(01)'.
          PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                        '/00'.
          CONCATENATE 'EORD-VDATU' '(' L_COUNT ')' INTO OPR_FIELD.
          WRITE SY-DATUM TO T_EORD-VDATU.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-VDATU.
          CONCATENATE 'EORD-BDATU' '(' L_COUNT ')' INTO OPR_FIELD.
          WRITE T_EORD-BDATU TO V_BDATU.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        V_BDATU.
          CONCATENATE 'EORD-LIFNR' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-LIFNR.
          CONCATENATE 'EORD-EKORG' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        '0001'.
          CONCATENATE 'EORD-RESWK' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-RESWK.
          WRITE T_EORD-MEINS TO V_MEINS.
          CONCATENATE 'EORD-MEINS' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        V_MEINS.
*          CONCATENATE 'EORD-EBELN' '(' L_COUNT ')' INTO OPR_FIELD.
*          PERFORM BDC_FIELD       USING 'OPR_FIELD'
*                                        T_EORD-EBELN.
          CONCATENATE 'EORD-EBELP' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-EBELP.
          IF T_EORD-FLIFN NE SPACE OR T_EORD-FRESW NE SPACE OR
             T_EORD-FEBEL NE SPACE.
            CONCATENATE 'RM06W-FESKZ' '(' L_COUNT ')' INTO OPR1_FIELD.
            PERFORM BDC_FIELD       USING OPR1_FIELD
                                          'X'.
          ENDIF.
          IF T_EORD-NOTKZ <> ''.
            CONCATENATE 'EORD-NOTKZ' '(' L_COUNT ')' INTO OPR_FIELD.
            PERFORM BDC_FIELD       USING OPR_FIELD
                                          'X'.
          ENDIF.
          CONCATENATE 'EORD-AUTET' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-AUTET.
          L_COUNT = L_COUNT + 1.
        ENDIF.
      ENDLOOP.
      PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                    'EORD-MATNR'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '=BU'.
      CALL TRANSACTION 'ME01' USING I_BDCDATA
                    MODE UP_MODE
*                     optIONS FROM l_opt
                    MESSAGES INTO I_BDCMSGCOLL.
      PERFORM FORMAT_OUTPUT.
    ENDIF.
ENDLOOP.

Similar Messages

ABAP HR How to create infotype with table control in it like Infotype 0008

Hi Experts.
I need help from u guys. My client requirement is to create custom infotype just like 0008 infotype which contain table control to save amount and wage types. I try to create infotype with table control using PM01, but that table control is in display mode only, i almost search every where to create custom infotype with table control but what ever threads in forum all are they unanswered and most of the threads for creating infotype. But i already done with infotype , but my main problem is table control.
If any one have some suggestion for this please share with me.
<removed by moderator> i am looking for positive reply.
Edited by: Thomas Zloch on Aug 30, 2011 12:54 PM

Hi
I've created several infotypes with a Table Control and it is always the same story. You have to create a custom Z table to store the Table Control data (if you can have unlimited records), so in the PSXXXX structure you need to add a TABNR field to link the PAXXXX table and the Z one, just like the type table OM infotypes.
Then in your code you have to control every possible operation, INS, MOD, DEL... and update the Z table accordingly (the standard code won't do that)
If your TC fields appear in display mode, take a look at the Groups 1 and 3 in your fields, the must be set with the usual values for a PA infotype.
If you have more questions, just ask,
Regards

BDC With table Control

Dear All .
can you give me some idea how to do BDC with tbale Control . Any documentation on the same or some simple example .

Handling Table Control in BDC
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
       NO STANDARD PAGE HEADING LINE-SIZE 255.
                Declaring internal tables                            *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
         dummy(255) TYPE c,
       END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
          ematn(18),      "Material Number.
          menge(13),      "Qyantity.
          netpr(11),      "Net Price.
          werks(4),       "Plant.
          ebelp(5),       "Item Number.
        END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
           lifnr(10),      "Vendor A/c No.
           bsart(4),       "A/c Type.
           bedat(8),       "Date of creation of PO.
           ekorg(4),       "Purchasing Organisation.
           ekgrp(3),       "Purchasing Group.
           x_data LIKE TABLE OF it_idata,
         END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
                Search help for file                                 *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
START-OF-SELECTION.
       To upload the data into line structure                        *
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename = p_file
      filetype = 'DAT'
    TABLES
      data_tab = it_dummy.
    Processing the data from line structure to internal tables       *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
    IF it_dummy-dummy+0(01) = 'H'.
      v_indx = v_indx + 1.
      CLEAR   it_idata.
      REFRESH it_idata.
      CLEAR   it_me21-x_data.
      REFRESH it_me21-x_data.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
                                       it_me21-bsart
                                       it_me21-bedat
                                       it_me21-ekorg
                                       it_me21-ekgrp.
      APPEND it_me21.
    ELSEIF it_dummy-dummy+0(01) = 'L'.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_idata-ematn
                                       it_idata-menge
                                       it_idata-netpr
                                       it_idata-werks
                                       it_idata-ebelp.
      APPEND it_idata TO it_me21-x_data.
      MODIFY it_me21 INDEX v_indx.
    ENDIF.
ENDLOOP.
                To open the group                                    *
PERFORM open_group.
        To populate the bdcdata table for header data                *
LOOP AT it_me21.
    v_count = v_count + 1.
    REFRESH it_bdcdata.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0100',
                                    ' ' 'BDC_CURSOR' 'EKKO-LIFNR',
                                    ' ' 'BDC_OKCODE' '/00',
                                    ' ' 'EKKO-LIFNR' it_me21-lifnr,
                                    ' ' 'RM06E-BSART' it_me21-bsart,
                                    ' ' 'RM06E-BEDAT' it_me21-bedat,
                                    ' ' 'EKKO-EKORG' it_me21-ekorg,
                                    ' ' 'EKKO-EKGRP' it_me21-ekgrp,
                                    ' ' 'RM06E-LPEIN' 'T'.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0120',
                                    ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                    ' ' 'BDC_OKCODE' '/00'.
    MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
    LOOP AT it_me21-x_data INTO x_idata.
      CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
      CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
      CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
      CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
      v_indx = v_indx + 1.
      PERFORM subr_bdc_table USING: 'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '/00'.
    ENDLOOP.
    PERFORM subr_bdc_table USING:    'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '=BU'.
    PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
                  End of selection event                             *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
    WRITE :/10 text-001.          "Sucess records
    WRITE :/10 SY-ULINE(20).
    SKIP.
    IF it_sucess IS INITIAL.
      WRITE :/ text-002.
    ELSE.
      WRITE :/   text-008,          "Total number of Succesful records
              35 v_ns.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_sucess.
      WRITE:/4 it_sucess-lifnr,
             17 it_sucess-tabix CENTERED,
             30 it_sucess-sucess_rec.
    ENDLOOP.
    SKIP.
*-----To display the erroneous records
    WRITE:/10   text-006.          "Error Records
    WRITE:/10   SY-ULINE(17).
    SKIP.
    IF it_error IS INITIAL.
      WRITE:/   text-007.          "No error records
    ELSE.
      WRITE:/   text-009,          "Total number of erroneous records
             35 v_ne.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_error.
      WRITE:/4 it_error-lifnr,
             17 it_error-tabix CENTERED,
             30 it_error-error_rec.
    ENDLOOP.
    REFRESH it_sucess.
    REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include           ZMM_INCL_PURCHASEORDERKB01
DATA:   it_BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
DATA:   it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       sucess_rec(125),
     END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       error_rec(125),
     END OF it_error.
       Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu.     "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12).                      "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX.       "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12).             "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX.     "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen                                                *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
     GROUP = SPACE. "OR USER = SPACE.
    MESSAGE E613(MS).
ENDIF.
create batchinput session                                          *
FORM OPEN_GROUP.
IF SESSION = 'X'.
    SKIP.
    WRITE: /(20) 'Create group'(I01), GROUP.
    SKIP.
*----open batchinput group
    CALL FUNCTION 'BDC_OPEN_GROUP'
      EXPORTING
        CLIENT = SY-MANDT
        GROUP = GROUP
        USER   = sy-uname.
    WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ENDIF.
ENDFORM.                    "OPEN_GROUP
end batchinput session                                             *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ELSE.
    IF E_GROUP_OPENED = 'X'.
      CALL FUNCTION 'BDC_CLOSE_GROUP'.
      WRITE: /.
      WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
    ENDIF.
ENDIF.
ENDFORM.                    "CLOSE_GROUP
       Start new transaction according to parameters                 *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
    WRITE: / 'BDC_INSERT'(I03),
             TCODE,
             'returncode:'(I05),
             SY-SUBRC,
             'RECORD:',
             SY-INDEX.
ELSE.
    REFRESH it_MESSTAB.
    CALL TRANSACTION TCODE USING it_BDCDATA
                     MODE   CTUMODE
                     UPDATE CUPDATE
                     MESSAGES INTO it_MESSTAB.
    L_SUBRC = SY-SUBRC.
    WRITE: / 'CALL_TRANSACTION',
             TCODE,
             'returncode:'(I05),
             L_SUBRC,
             'RECORD:',
             SY-INDEX.
ENDIF.
Message handling for Call Transaction                              *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
    IF E_GROUP_OPENED = ' '.
      CALL FUNCTION 'BDC_OPEN_GROUP'
        EXPORTING
          CLIENT = SY-MANDT
          GROUP = E_GROUP
          USER   = sy-uname
          KEEP   = E_KEEP.
      E_GROUP_OPENED = 'X'.
    ENDIF.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM.                    "BDC_TRANSACTION
     Form subr_bdc_table                                            *
      text
     -->P_0220   text                                                *
     -->P_0221   text                                                *
     -->P_0222   text                                                *
FORM subr_bdc_table USING      VALUE(P_0220) TYPE ANY
                                VALUE(P_0221) TYPE ANY
                                VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
    CLEAR it_bdcdata.
    it_bdcdata-fnam     = P_0221.
    it_bdcdata-fval     = P_0222.
    APPEND it_bdcdata.
ELSE.
    it_bdcdata-dynbegin = P_0220.
    it_bdcdata-program = P_0221.
    it_bdcdata-dynpro   = P_0222.
    APPEND it_bdcdata.
ENDIF.
ENDFORM.                    " subr_bdc_table
     Form subr_mess_hand                                            *
      text                                                           *
     -->P_G_MESS text                                               *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID     = it_messtab-msgid
        LANG   = it_messtab-msgspra
        NO     = it_messtab-msgnr
        v1     = it_messtab-msgv1
        v2     = it_messtab-msgv2
      IMPORTING
        MSG    = P_G_MESS
      EXCEPTIONS
        OTHERS = 0.
    CASE it_messtab-msgtyp.
      when 'E'.
        it_error-error_rec   = P_G_MESS.
        it_error-lifnr       = it_me21-lifnr.
        it_error-tabix       = v_count.
        APPEND IT_ERROR.
      when 'S'.
        it_sucess-sucess_rec = P_G_MESS.
        it_sucess-lifnr      = it_me21-lifnr.
        it_sucess-tabix      = v_count.
        APPEND IT_SUCESS.
    endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM.                    " subr_mess_hand

BDC with Table control. how to handle the scrolling function?

I have 20 records to be uploaded to table control using BDC. But the screen displayed shows only 10 rows and i have to scroll down to enter the 11th record onwards. but this job has to be done in the background. give me sugesstions on this isssue.

Moderator message - Please search before asking - post locked
Moderator message - Cross post locked

How to create infoset with tables of several system

Dear expert, I have the following requirement from the user.
I Need to create in SQ02 an infoset that put in join some table that are in different SAP system.
Some tables are in CRM, some other table in r/3.
Is there a way to do it ?
Thanks and regards
Davide Grosso

Davide,
Since the data exists in different systems - you cannot bring them together directly as a view - even if they are all SAP Systems.
If you still want to bring the data together - then you can use RFC Enabled function modules to read the base tables and try and put the data together... or bring the data in into separate tables into one single system and then create your view..
Edited by: Arun Varadarajan on Nov 3, 2011 9:41 AM

Create Roles with acess control in SAP MDM

Hi Experts,
I am new to SAP MDM.I want to know how to create roles with access control for various users in SAP MDM.
Thanks,
Manoj

hi,
in the console; you can create roles with access control and you can assign these roles to users.
follow this path:
Console --> repository --> Admin node --> roles,
here you can create new role. for role here you can maintain
1. role detail
2. Functions --here you can restrict the particular role , none / Execute the functions.
3. Tables/fields -- here you can give access to the role Read only / Read and write, and you can apply constraints also.
and follow the links:
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
hope this may help you,
Regards,
Srinivas

How to add rows in table control for data recording BDC?

hello,
pl tell me the way to upload data through BDC in table control of screen .
how to add fields inrecording of table control?
Please give some code in this regard.
I am generous in giving points..pl help!

Hi,
While doing code under recording first you need to do the recording with sample data under a particular transaction like T-code XK01 (Vendor creation).
Take an example of create vendor using T-code XK01:
Go to t-code 'SHDB' under make recording for XK01 with sample data and once if you complete the recording means after vendor creation check the source code bye by pressing the button 'Program', it shows the total coding for recording of what you entered the test data.
Then you will create one program and copy that source code of recording into your program, and now you have to remove the values at perform statement and give the internal table field name.
Like that you can develop your own code along with your validations.
my best suggestion is dont see the example code of recording method because any one for standard t-code should get the code from recording with sample data, so first tryout with your own recording method and you can understand the code step by step.
With these I hope you will get some idea of recoding method.
Let me know for further doubts.
Regards,
Vijay.

Hi All, How we can handle a table control in bdc - in detail its urgent pls

Hi All, How we can handle a table control in bdc - in detail its urgent. Please send me the explanation in detail.
Thanks&regards.
Bharat

hi,
Create Table Control
Step 1 (Create new structure for table control)
Type is name of structure (ZTC_EKKO) and press create
Step 2 (Create Program)
Goto transaction SE80(Object Navigator) -> Repository Browser -> Program.
Enter your program name, please ensure that is begins with SAPMZ as this is a module pool (dialog program).
Press enter to create, and press yes!
Ensure that you create a top include, and press Enter.
Accept the name created for the top include.
Press Enter.
Press Save
Step 3 (Create TOP include)
Double click on the top include and enter following ABAP code:
Tables: ZTC_EKKO.
controls: tc100 type tableview using screen 100.
data: ok_code type sy-ucomm.
data: it_ekko type standard
table of ZTC_EKKO initial size 0,
wa_ekko type ZTC_EKKO.
data: ok_code type sy-ucomm.
Press Save and Activate
Step 4 (Create screen)
Right click the program to create a screen 100 for the dialog. Enter Short description, set screen type to Normal and enter 0 or blank into Next screen. Then move to Element List tab and enter the OK code as OK_CODE (i.e. the same as what you declared in the top include with data: ok_code type sy-ucomm).
Step 5 (Create table control)
Press the Layout button to bring up the screen painter editor.
Press table control button and drag it on to the screen, enter the name of table control created in TOP include (TC100). Now press the yellow button for attributes and set the table control as below options
Step 6 (Populate table control )
Press the orange button (Fields). On the next screen enter ZTC_EKKO and press the Get from Dict button. Select the fields you want (all) and press enter. Now drag them onto your Table Control.
Below is the result, there will been syntax errors if we check now! So Save and go back into the flow logic tab.
Step 7 (Create flow control )
Within the flow logic of screen 100 and create two modules, one to select the data from the database and the other to move the selected fields into the table control. Also insert the two loop statements to populate and retrieve the lines of the table control.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
module data_retrieval.
loop at it_ekko into wa_ekko with control TC100.
module populate_screen.
endloop.
PROCESS AFTER INPUT.
loop at it_ekko.
endloop.
MODULE USER_COMMAND_0100.
Double click the module data_retrieval to create and click yes to get past the popup. Ensure that a new include is created to hold all the PBO modules (default). Press enter.
Select 10 rows of data from the EKKO table and load into the internal table it_ekko. Go back to the flow logic to load this data into the Table Control.
check this one
REPORT ZCALL_TRANS_TAB1 .
TABLES: LFA1,LFBK,lfb1.
data: BEGIN OF it_vendor occurs 0,
LIFNR LIKE LFA1-LIFNR,
bukrs like lfb1-bukrs,
END OF it_vendor.
DATA: BEGIN OF IT_BANK occurs 0,
LIFNR LIKE LFA1-LIFNR,
BANKS LIKE LFBK-BANKS,
BANKL LIKE LFBK-BANKL,
BANKN LIKE LFBK-BANKN,
koinh like lfbk-koinh,
END OF IT_BANK.
data: it_bdcdata like bdcdata occurs 0 with header line.
data: it_messages like bdcmsgcoll occurs 0 with header line.
*selection screen.
selection-screen: begin of block b1 with frame.
parameters: p_file like rlgrap-filename default 'c:/vendor.txt'
obligatory.
parameters: p_file1 like rlgrap-filename default 'c:/xyz.txt'
obligatory.
selection-screen: end of block b1.
*at selection screen.
at selection-screen on value-request for p_file.
perform f4_help using p_file.
at selection-screen on value-request for p_file1.
perform f4_help1 using p_file1.
*start of selection
start-of-selection.
*******uploading file
perform upload_file using p_file P_FILE1.
******open session.
perform populate_data.
*& Form f4_help
form f4_help using p_p_file.
data: l_file type ibipparms-path.
call function 'F4_FILENAME'
importing
file_name = l_file.
p_file = l_file.
endform. " f4_help
*& Form POPULATE_DATA
form populate_data .
DATA: L_STRING TYPE STRing.
DATA: L_COUNTER(2) TYPE n.
loop at it_vendor.
perform bdc_dynpro using 'SAPMF02K' '0106'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-D0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
it_vendor-lifnr.
perform bdc_field using 'RF02K-BUKRS'
it_vendor-bukrs.
perform bdc_field using 'RF02K-D0130'
'X'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-bankn(03)'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
*********bank details
CLEAR l_COUNTER.
LOOP AT IT_BANK WHERE LIFNR = IT_VENDOR-LIFNR.
l_COUNTER = l_COUNTER + 1.
clear l_string.
CONCATENATE 'lfbk-banks(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-banks.
clear l_string.
CONCATENATE 'lfbk-bankl(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-bankl.
clear l_string.
CONCATENATE 'lfbk-bankn(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-bankn.
endloop.
******CALL TRANSACTION.
call transaction 'FK02' using it_bdcdata mode 'A'
messages into it_messages.
write:/ sy-subrc.
perform format_messages.
clear it_bdcdata.
refresh it_bdcdata.
endloop.
endform. " POPULATE_DATA
*& Form FORMAT_MESSAGES
form format_messages .
data: l_msg(100).
loop at it_messages.
call function 'FORMAT_MESSAGE'
exporting
id = it_messages-msgid
lang = sy-langu
no = it_messages-msgnr
v1 = it_messages-msgv1
v2 = it_messages-msgv2
v3 = it_messages-msgv3
v4 = it_messages-msgv4
importing
msg = l_msg
exceptions
not_found = 1
others = 2
write:/ l_msg.
endloop.
endform. " FORMAT_MESSAGES
*& Form bdc_dynpro
form bdc_dynpro using value(p_program)
value(p_screen).
it_bdcdata-program = p_program.
it_bdcdata-dynpro = p_screen.
it_bdcdata-dynbegin = 'X'.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_dynpro
*& Form bdc_field
form bdc_field using value(p_fnam)
value(p_fval).
it_bdcdata-fnam = p_fnam.
it_bdcdata-fval = p_fval.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_field
*& Form upload_file
form upload_file using p_p_file
p_p_file1.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_VENDOR
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
*******UPLOADING BANK DETAILS
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE1
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_BANK
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
endform. " upload_file
*& Form f4_help1
-->P_P_FILE1 text
form f4_help1 using p_p_file1.
data:l_file1 type ibipparms-path.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = l_file1.
p_file1 = l_file1.
endform. " f4_help1
http://sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
Sankar

How can I work lsmw with table control using mm01 appl?

Hi
How can I work lsmw with table control using mm01 appl?
Is it difefrent the way we handle table control in BDC?
Thank You

Hi
How can I work lsmw with table control using mm01 appl?
Is it difefrent the way we handle table control in BDC?
Thank You

How to transfer data in table control in bdc

hi
how to transfer data in table control in bdc . I need the theory regarding this
bye

Hi,
just check in the forum , there is many threads available to ur questions.
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
You can even refer to these related threads
bdc table control
Re: table control in bdc
table control in BDC
Reward if helpful.
Thanks
Naveen khan

How to create database and table with GUI?

How to create database and table with GUI?
for linux can do that?
or have only way to create table by use sql*plus.
everyone please help me.
thanks

go to www.orasoft.org
here is a gui tool.
null

BDC program for rebate with table controls

Hi Friends,
Iam Doing bdc program for Rebate(TCODE VBO1) with table controls..
can u give the solutions for table controls...
if anybody having the code..please send me..
Thanks & Advance,
sampath

hi,
check this example it may help you.
REPORT ZSR_BDC_TBCTRL
        NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES : RF02K,LFA1,LFBK.
DATA : BEGIN OF IT_VEN OCCURS 0,
      LIFNR LIKE RF02K-LIFNR,
      KTOKK LIKE RF02K-KTOKK,
      NAME1 LIKE LFA1-NAME1,
      SORTL LIKE LFA1-SORTL,
      LAND1 LIKE LFA1-LAND1,
      SPRAS LIKE LFA1-SPRAS,
      BANKS(6) TYPE C,
      BANKL(17) TYPE C,
      BANKN(19) TYPE C,
      END OF IT_VEN.
DATA : BEGIN OF BANKS OCCURS 0,
       BANKS LIKE LFBK-BANKS,
       END OF BANKS,
       BEGIN OF BANKL OCCURS 0,
       BANKL LIKE LFBK-BANKL,
       END OF BANKL,
       BEGIN OF BANKN OCCURS 0,
       BANKN LIKE LFBK-BANKN,
       END OF BANKN.
DATA : FLD(20) TYPE C,
       CNT(2) TYPE N.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'Z:\sr.TXT'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
TABLES
    DATA_TAB                      = IT_VEN
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_VEN.
    REFRESH BDCDATA.
    REFRESH : BANKS,BANKL,BANKN..
    SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
    SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
    SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'RF02K-KTOKK'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_FIELD       USING 'RF02K-LIFNR'
                              IT_VEN-LIFNR.
PERFORM BDC_FIELD       USING 'RF02K-KTOKK'
                              IT_VEN-KTOKK.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFA1-SPRAS'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_FIELD       USING 'LFA1-NAME1'
                              IT_VEN-NAME1.
PERFORM BDC_FIELD       USING 'LFA1-SORTL'
                              IT_VEN-SORTL.
PERFORM BDC_FIELD       USING 'LFA1-LAND1'
                              IT_VEN-LAND1.
PERFORM BDC_FIELD       USING 'LFA1-SPRAS'
                              IT_VEN-SPRAS.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFA1-KUNNR'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFBK-BANKN(02)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=ENTR'.
*perform bdc_field       using 'LFBK-BANKS(01)'
                             'DE'.
*perform bdc_field       using 'LFBK-BANKS(02)'
                             'DE'.
*perform bdc_field       using 'LFBK-BANKL(01)'
                             '10020030'.
*perform bdc_field       using 'LFBK-BANKL(02)'
                             '67270003'.
*perform bdc_field       using 'LFBK-BANKN(01)'
                             '12345'.
*perform bdc_field       using 'LFBK-BANKN(02)'
                             '66666'.
MOVE 1 TO CNT.
    LOOP AT BANKS.
      CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKS-BANKS.
      CNT = CNT + 1.
    ENDLOOP.
    MOVE 1 TO CNT.
    LOOP AT BANKL.
      CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKL-BANKL.
      CNT = CNT + 1.
    ENDLOOP.
    MOVE 1 TO CNT.
    LOOP AT BANKN.
      CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKN-BANKN.
      CNT = CNT + 1.
    ENDLOOP.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=ENTR'.
PERFORM BDC_DYNPRO      USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=YES'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP.&----
*& Report ZSR_BDC_TBCTRL
REPORT ZSR_BDC_TBCTRL
        NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES : RF02K,LFA1,LFBK.
DATA : BEGIN OF IT_VEN OCCURS 0,
      LIFNR LIKE RF02K-LIFNR,
      KTOKK LIKE RF02K-KTOKK,
      NAME1 LIKE LFA1-NAME1,
      SORTL LIKE LFA1-SORTL,
      LAND1 LIKE LFA1-LAND1,
      SPRAS LIKE LFA1-SPRAS,
      BANKS(6) TYPE C,
      BANKL(17) TYPE C,
      BANKN(19) TYPE C,
      END OF IT_VEN.
DATA : BEGIN OF BANKS OCCURS 0,
       BANKS LIKE LFBK-BANKS,
       END OF BANKS,
       BEGIN OF BANKL OCCURS 0,
       BANKL LIKE LFBK-BANKL,
       END OF BANKL,
       BEGIN OF BANKN OCCURS 0,
       BANKN LIKE LFBK-BANKN,
       END OF BANKN.
DATA : FLD(20) TYPE C,
       CNT(2) TYPE N.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'Z:\sr.TXT'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
TABLES
    DATA_TAB                      = IT_VEN
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_VEN.
    REFRESH BDCDATA.
    REFRESH : BANKS,BANKL,BANKN..
    SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
    SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
    SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'RF02K-KTOKK'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_FIELD       USING 'RF02K-LIFNR'
                              IT_VEN-LIFNR.
PERFORM BDC_FIELD       USING 'RF02K-KTOKK'
                              IT_VEN-KTOKK.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFA1-SPRAS'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_FIELD       USING 'LFA1-NAME1'
                              IT_VEN-NAME1.
PERFORM BDC_FIELD       USING 'LFA1-SORTL'
                              IT_VEN-SORTL.
PERFORM BDC_FIELD       USING 'LFA1-LAND1'
                              IT_VEN-LAND1.
PERFORM BDC_FIELD       USING 'LFA1-SPRAS'
                              IT_VEN-SPRAS.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFA1-KUNNR'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFBK-BANKN(02)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=ENTR'.
*perform bdc_field       using 'LFBK-BANKS(01)'
                             'DE'.
*perform bdc_field       using 'LFBK-BANKS(02)'
                             'DE'.
*perform bdc_field       using 'LFBK-BANKL(01)'
                             '10020030'.
*perform bdc_field       using 'LFBK-BANKL(02)'
                             '67270003'.
*perform bdc_field       using 'LFBK-BANKN(01)'
                             '12345'.
*perform bdc_field       using 'LFBK-BANKN(02)'
                             '66666'.
MOVE 1 TO CNT.
    LOOP AT BANKS.
      CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKS-BANKS.
      CNT = CNT + 1.
    ENDLOOP.
    MOVE 1 TO CNT.
    LOOP AT BANKL.
      CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKL-BANKL.
      CNT = CNT + 1.
    ENDLOOP.
    MOVE 1 TO CNT.
    LOOP AT BANKN.
      CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKN-BANKN.
      CNT = CNT + 1.
    ENDLOOP.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=ENTR'.
PERFORM BDC_DYNPRO      USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=YES'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP.

[b]How to create this Custom Table on Custom Schema with foreign key [/b]

This Custom Table is create in Custom Schema and Refers to Seeded Table in APPS schema
1 create table test_dff (test_id number(15) primary key,
2* invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE)
SQL> /
invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE
ERROR at line 2:
ORA-02270: no matching unique or primary key for this column-list
How to create this Custom Table on Custom Schema
thanks in advance

hi prashant
sorry for replying late, i have checked your query and it gives me no rows, but if i check for user_cons_columns it gives me no rows either in APPS Schema, but in AP schema it gives me
SQL> SELECT * FROM user_cons_columns WHERE table_name = 'AP_INVOICES_ALL';
OWNER CONSTRAINT_NAME TABLE_NAME
COLUMN_NAME
POSITION
AP SYS_C008177 AP_INVOICES_ALL
INVOICE_ID
SQL> SELECT constraint_name, constraint_type FROM user_constraints WHERE table_name = 'AP_INVOICES_A
LL';
CONSTRAINT_NAME C
SYS_C008177 C
SYS_C008178 C
SYS_C008179 C
SYS_C008180 C
SYS_C008181 C
SYS_C008182 C
SYS_C008183 C
SYS_C008184 C
SYS_C008185 C
SYS_C008187 C
SYS_C008189 C
SYS_C008191 C
and since this is a combination of Unique and Not Null Constraints , i am getting the same issue. do u have any solution to make the Detail table records to delete without using Alerts/DB Triggers?
thanks for your time .
abdul rahman

How to disable fields in Table control???

Hi
How to disable fields in Table control??? I want to disable particular row in table control when enter datas are correct.lets take as example ME41 or ME51 table control.
Can anyone tell how to do disable in this table control
Points will be rewarded if its helpful.
Thanks
senthil

If you want to disable the row then you can use
in pbo module create a module in side loop,
loop at itab with control tc.
module change_screen.
endloop.
in module,,,,,
loop at screen.
if condition.
screen-input = 0.
modify screen.
endif.
endloop.
Regards
Vijay

Select-option in module pool with table Control

HI,
How to use the select-option in Module Pool and how Can i use the Table control in it.
Can any body give me some Clues.
with rgds
Ranjith

Hi ..
PBO.
LOOP at <table contriol>
module --- Inside the module
DATA: g_uti TYPE REF TO cl_fobu_input_util.
if rollname <> space.
     CREATE OBJECT g_uti
       EXPORTING typename =rollname.
*....convert to external pattern
     CALL METHOD g_util->output_convert
       EXPORTING
         field_value_int = p_value                 " This is Tablecontrol-low
       IMPORTING
         field_value_ext = p_value.              " Retrun value for Low
ENDLOOP.
lly you have code in PAI
DATA: g_util_1 TYPE REF TO cl_fobu_input_util.
if rollname <> space.
     CREATE OBJECT g_util_1
       EXPORTING typename = rollname.
*....convert to internal pattern
     CALL METHOD g_util_1->input_convert
       EXPORTING
         field_value_ext   = p_value
       IMPORTING
         field_value_int_c = p_value.
The above code should be written for tablecontrol-high aswell..
you can also refer: Inlcude LSE16NF10 line no 341 & 434 (SE16n)
Nag

How to create bdc with table control

Similar Messages

Maybe you are looking for