How to manage transfer to OLTP system for deployment

hello experts,
Please could you suggest me how to solve this problem:
The rule is that only TLB results must be transferred to ECC
However, some Plants are not using TLB and I need to get the results of deployment sent to ECC for those plants.
I have set the checkbox TLB immediate transfer in SPRO (Configure transfer to OLTP system). I have also maintained all the plants in SPRO maintain distribution definition with external procurement. For deployment I ticked "no transfer"
I don't know whether it is possible to send results of deployment only for a couple of selected plants.
Is it possible without using CHange Pointers??
Thank you for your answers,
Best regards
EL

Hi,
this whole activity needs to be handled in two steps.
Step 1 - Run TLB for only those plants which need to have STOs. This can be done as a standard APO requirement. In the variant exclude the plants for which you do not want to run TLB
Step 2 - Once step 1 is completed publish Deployments orders (STRs) from APO to ECC using T.Code /sapapo/c5. Here in the varaint select the correct order type and locations for which you want to sent STRs.
Please run these in batch jobs ensuring to maintain the sequence, to avoid confusion.
Thanks,
Harsh

Similar Messages

  • Functions not possible because of transfer to OLTP system

    Hi gurus,
    when i am doing /SAPAPO/VERMER, getting error like "functions not possible because of transfer to OLTP system"  can you suggest me and elaboratly.
    Thx
    moon

    turn off transfer to OLTP for both SNP and Deployment via SDP110.

  • How can I transfer my files/system in VAIO laptop (w/ S400 Firewire port) to my New Macbook Pro?

    How can I transfer my files/system in VAIO laptop (w/ S400 Firewire port) to my New Macbook Pro?
    Do I need to buy an adapter? How do I setup the software to make these two system connected?

    r95941081 wrote:
    Thanks for your answering. But the issue is that I'll often transfer a large amount files from PCs to the Macbook, and I'm explring the way to use firewire since there is indeed an i-S400 port in the VAIO laptop, and it's much faster.
    USB 2 is faster than Firewire 400 and USB 3 is faster than Firewire 800
    If it was another Mac you were transferring from then you could use Firewire Target Disk Mode which makes the boot drive of the old Mac appear on the desktop of the new Mac to rapidly copy files, but you have a Windows PC with no FWTDM capability.
    So to connect the two machines requires a network be setup over Ethernet and mucking around with the complexities of all that and it still takes awhile to finish. One can't setup a network with a PC over USB or Firewire, only Firewire with another Mac.
    You get a external USB drive, USB 3,2,1 is fine and just drag and drop copy, the machine does all the work and you go do something else until it's finished, then repeat the same with the Mac.
    Fast simple and effective, let it copy overnight if you have too.
    I routinely clone my entire hard drive via USB 2 and it only takes a hour and a half for 350GB.
    By the time you figure out how to network a Mac and a PC over Ethernet and getting it work to transfer files, you could be done already via USB.

  • How to install 0FI_GL_10 in OLTP system

    Hi! Tell me please how can I install 0FI_GL_10 in OLTP system (for next replication to BW system). Do I need install it from BI Content, that is do I need install BI Content in OLTP system at first?
    Thanks,
    Olga

    Hi! I run RSA9. I got message "The application component hierarchy was transfered from the Content". But the folder "SAP" in "Source Systems" stays empty: no any subfolders and source systems in it. When I try to open folder "SAP" I get message "No entry for BW_USER in table RSAMIN available".
    The folder "BI" exists in Source Systems but with strange content: something called "Sender", when I click twice on it  I see "NODESNOTCONNECTED" and different data sources in it, for example, "Aggregated Status for Area of Responsability"... "Planning Calendar" ... etc
    Please else any ideas?
    Thanks,
    Olga

  • How to manage and prevent database lock for database admin and development

    how to manage and prevent database lock for database admin and development
    [email protected]

    Hi,
    can someone advise me some good book or even better a PDF or a white paper on the Web where it's explained well how to design and manage a relational database (that is normal forms, tuning, design, implemantation...)?
    I've been working on Oracle databases for a few years as pl sql programmer, but I'd like to read something describing well the relational database theory, because I've been asked to work as database designer.There are many books available in the market, please go through this link -- http://www.amazon.com/gp/bestsellers/books/549646/ref=pd_ts_b_nav
    I've been told to read "Fundamentals of Database Systems" by Ramez Elmasri, but I ask here for some more advices.I would strongly recommend reading this book, it was my best reference during my college study and even after starting my DBA career.
    Thanks,
    Hussein

  • I have an iPod, iPhone and iPad all set up to a Dell laptop. I recently got a Macbook Pro, how do I transfer all my control for my devices from the Dell to the MacBook?

    I have an iPod, iPhone and iPad all set up to a Dell laptop. I recently got a Macbook Pro, how do I transfer all my control for my devices from the Dell to the MacBook?  Can anyone help?

    http://www.apple.com/support/switch101/
    http://www.macworld.com/article/1153952/superguide_switchingtoamac.html

  • How do I create an archive system for a blog created with a custom app?

    I had to create a blog using a custom app, because I needed an image to show up in the list view (a feature I can't believe does not exist in the blog module). Anyways, I am wondering how can I create an archive system? Do I need to create categories for each month/year and then classify the post each time we create one. Then manually create links each month to pages that filters listing by that category? This is the system I tried, but I was wondering if there was a better way.
    Also, I would like to have a sidebar that shows all the authors/contributors of the blogs and have a count under their photo that shows how many blogs they have contributed to, and have this update dynamically each time they create a new post. I was wondering if a data source tag is the way to do this but I don't have enough information on how the data source tag even works, to really know how to do this.
    I have searched google for hours, and even signed up for BC gurus tutorials with no real luck. I thought BC gurus was going to have the answer but it wasn't quite detailed enough. Any help would be much appreciated. Thanks!

    You can use classifications but there is no auto feature to archive like that on web apps.
    In terms of the blog, Like I have said to everyone that has posted about blog preview images:
    http://www.prettypollution.com.au/business-catalyst-blog
    Just one example of an image at the start of the blog post rendering out, not hard at all.

  • How to manage one wsp and dll for multiple clients in farm environment

    1. There is a product which is developed using C sharp , jquery,CSS and sharepoint object models which have been packaged into .wsp file. Whenever we introduce new functionality to the product we used to branch the
    previous code as a version , say Version 1.0 and new functionality of the product will in another solution. This is how we are managing the code in TFS as versions. Each newer version will have new functionalities. We do not give latest functionality for all
    the clients. Each client is having its own version of functionality. Technically in order to access the functionality, the wsp solution should be present in the solution repository which is available in SharePoint central administrator site. This solution
    will be deployed on the client’s site. We are following the above process in SharePoint standalone installation where we used to purchase dedicated server per client and installed sql, SharePoint foundation 2010 as standalone installation and adding the client
    related version of the code to the solution repository. Later host on the site which is created for that client purpose. This process is same for all the clients where we purchase individual server for each client .
        Now we want to host our product in farm environment of sharepoint foundation 2010 where we are going to try 3 level architecture. 
    • SQL Server-In this sever we are going to install sql server 2008R2 standard edition. Which should serve the database service for all the web applications/sitecollections which we are going to create in Web front end server.
    • Application server- In this server we are going to install the sharepoint as farm and will install search server express for serving search functionality for our product
    • Web front end server- In this server we are going to add this server to Sharepoint farm which we have created in application server. Here we are going to create web applications and site collections for all the clients.
    In this scenario how to manage multiple versions of same wsp solution?
    Another major issue w.r.t the architecture of the product and new approach for client deployment as follow.We have CSS, jquery files for serving the functionality.These files have been mapped to 14 hive folder.If any changes we do one of the jquery file or
    css file which is meant for latest version and not for old version, then how to manage this new functionality for that particular css or jquery file in 14 hive folder, since there is only one 14 hive folder. What is the best practice to make this happen? Another
    thing is, how to manage dll files for individual client?

    It sounds like you have a farm scoped solution at work. In that case you can only have a single instance of it per farm, you'd have to branch each version so they appear to be seperate solutions entirely (thus ruining your clients upgrade process).
    Bluntly i don't think a single farm can manage all your user environments.

  • How can I creat a security system for a truck, with Wifi camera playing on iPad/iPhone without 3G/LTE ?

    Hello,
    I want to create a wifi security system for a truck with cameras, but all the ones I found are IP. So I don't know if it's possible to use it only on wifi (not on 3G/LTE).
    If you have an idea, it will be nice...
    Thank you

    that range of most wifi setup unless you want to pay alot!
    would likely mean you could see about as much as the camera from where you were standing
    a mifi or otherwise something which bridge a lan to the internet would work
    make sure the camera have a webserver in it and then you can see it from any web browser where you put in the login and password

  • How to Configure Location based Accounts system for a company

    Hi Experts,
    My client using SAP B1 2007B PL13.
    I am configuring the Accounts part. here My client is involved in manufacturing business. so there are 3 locations like
    Location 1: Head Office
    Location 2: Factory1 and Warehouse1.
    Location 3: Factory2 and Warehouse2.
    they are asking the financial report for all three locations to find the expenditure and returns. Under this scenario i am confused to configure the accounts system for them, whether,  i have to create a 1) segmentation accounts 2) Profit center and 3)cost center.
    can anyone guide me to decide and explain a breif work around for my scenario.

    Hi rakesh,
    Yes, I am just started implementation for my client. their requirement is to take the report on location wise.  so initially i have to decide , weather i can use segmentation or profit center ?
    note: number of location will increase in future. so having this in mind , i have to decide the best method to make the process easier to the end user in future times too.
    are am clear?  can u help me out.!!
    Thanks & regards,''
    Dwarak

  • How to manage different apple id's for icloud and itunes purchases and game center etc. ?

    Hi
    Myself and my brother have been sharing the same apple id for all the itunes purchases. We both have iphone 4. Since the introduction of icloud, we are little confused about the id managing process. Yesterday, we both updated our iOS to iOS 5. And, just after installing iOS 5, we were asked to enter apple id and password. We both entered the same id and password. Now both are iphones have overlapping contacts and other stuff.
    Now, we have deciced that we want to make separate apple id's for ourselves i.e we want different apple id's for our iclouds (plus game center) and same apple id's for all our itunes purchases (if we are allowed to do that).
    So now we have no idea how to do this after once entering the same id during iOS 5 installation. Any help would be greatly appreciated.
    Thanks

    If you're wanting to share content between multiple apple ids in the family I would suggest to use iTunes match.
    http://www.apple.com/itunes/itunes-match/

  • HT1338 How do I update the Operating System for my MacBook Pro?

    I currently have OS version 10.5.8.  I can't get the proper plug-ins for Flash anymore because my Mac OS is too old.  I've tried updating the OS, but it will not let me install it.  Any help on this would be greatly appreciated.  Thanks.

    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • How do I add another operating system for Dual boot in Windows 8.1 boot configuration?

    Hello,
    I am trying to create a dual-boot Windows 8.1 Pro system to allow both 32bit and 64 bit Windows 8.1 versions.  I currently have Windows 8.1 32bit installed.  Appreciate some background on how to add 64bit Windows 8.1.
    Thanks, in advance.

    The easiest way is to do this (this assumes some technical knowledge as well as access to the currently installed operating system and the 64bit install files)
    1: launch diskpart from run or cmd
    2: select the current OS disk using "select disk 0"
    3: select the current OS volume using "select partition x" where x is the number of partition (you can use "list partition" to see all current partitions)
    4: enter "shrink minimum=xxxxx" where xxxxx is the size in megabytes you want to new OS to have
    5: Enter "create partition primary"
    6: Enter "format quick fs=ntfs label="Windows x64""
    7: Enter "assign letter y"
    8: select your current system partition using "select partition x" where x is the number of partition. If you have a UEFI install on a GPT disk, this partition will be formatted in fat32. Otherwise, it will be a 100mb NTFS partition
    9: Enter "assign letter s"
    10: exit diskpart, and open up an administrator cmd prompt
    11: Enter "dism /get-imageinfo /imagefile:e:\sources\install.wim" where e: is the drive letter that you have your .iso mounted in. If you have the iso extracted, you can just point to the current extracted area then \sources.install.wim. This will
    show you a list of indexes that the .wim file supports. A standard retail version of the .iso will have Windows 8 Pro be index 1. If it is not, just change the index number in the next command.
    12: Enter "dism /apply-image /imagefile:e:\sources\install.wim /index:1 /applydir:y:"
    13: Enter "bcdboot y:\windows /s s: /f UEFI" (if you are using a MBR disk and not UEFI with a GPT disk, enter /f BIOS instead)
    14: Reboot, select the x64 partition in the menu that comes up, and you are good to go!
    You can also just create a new partition using disk manager then boot to the x64 disk and install it to the new partition, but that runs the risk of accidentally installing over something that shouldn't be if you select the wrong disk.

  • How to determine the sender business system for ABAP client proxy

    Hi All,
    I have one doubt: when the client proxy sends the message to XI, how could i know what is the sender business system name for it?
    Is it the logical system which is reflected in Technical System?
    let's say if i have the ABAP system, the technical system is ECC, which has three clients: 001, 066 and 000.
    And the client 001's logical system in ECCCLNT001 (all the client proxy is created in this client). In this case, the sender business system name is ECCCLNT001, am i right?
    If no, please correct me.
    Thanks in advance
    Leo

    Hi lawrence
    When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.                               
    A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
    Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
    Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
    You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
    Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: <System-ID>CLNT<Client>.
    Regards
    sandeep

  • How do I disable "away mode system" for Win 7 Home Premium on a Pavillion a1540n?

    I have an "Issue" per Windows 7 - some sort of problem in which it wants me todisable "away mode" in my bios. Unfortunately my bios (Phoenix 3.07) says nothing about an "away mode", nor how to disable it. Can anyone help me to get this nagging error message corrected?

    jim4065,
    As your system BIOS settings could not be looked up on the HP site (readily), I found these. Because your system was originally XP, you might have to follow the logic more closely. Also helpful would be whether it's 32 or 64  bit, as it is important  in many situations (see below).
    Read here  or here for 64bit problem.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

Maybe you are looking for