How to manually insert a jumper multisim

hi i want to transfer my circuit to ultiboard but i need a jumper how do i add it on multisim my version does not support automatic insertion.

Hi,
You can place jumper wires in Ultiboard 12.0 by going to Place>Jumper.
Refer to the following discussion, it explains an alternative if your version of Ultiboard doesn't have the "Place>Jumper" option. http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/Automatic-jumper-insertion/td-p/520570

Similar Messages

How to manually insert an extra row of data in to a record set

hi there, i have a standard query which gets me some rows of
data
is there a way to manually add in an extra row of data (an
position that as row number 1 in the recordset)?
i've tried to find something on this in google / live docs -
but alas to no avail
if anyone could give me a pointer in the right direction
(just a tag would be a help) i'd be very grateful indeed.
thanks very much

thank you very much for your replies, this "union query"
sounds like the way forward for me - thank you very much i shall go
and investiage this now.
the reason i was a bit slow in replying was that in interim i
had coded around my problem
<cfif recordset.currentrow eq 1>
#output the extra row i wanted to add here#
</cfif>
which, whilst being a bit crude did do the job - however i
will check out this union query and if that does what it sounds
like it will - i'll document my final solution here in case this
helps anyone else
thanks again for your help guys

How to manually insert artist photos in the artist column?

I wanted to know specifically how to customize artist photos in the artist section of the iPod / iPhone, etc. As you can see, it shows a corresponding album to that artist, but I wanted to put a photo of the artist there like they have in the iTunes Radio. Mainly cause it would look nice, and I have several artist that doesn't have photos anyway. There was a thread that someone put custom photos on their column using iFunbox. I have it, but don't know how the person did it.
Any help?

I'm installing that currently.
This was the step by step tutorial that I got. Could you simplify / have any knowledge of it?
1. Need ifunbox or other soft to download/upload to phone
2. Download /private/var/mobile/Media/iTunes_Control/iTunes/MediaLibrary.sqlitedb
3. Prepare images and put them to /private/var/mobile/Media/iTunes_Control/iTunes/Artwork/Original/00 folder
     (use your own naming, for example "deeppurple.jpg")
4. Use Sqlite3 db editor edit 2 tables
4.1 artwork
     add line for each artist with parameters id,4,name jpg,4. Where jpg name like u decide in 3
     For example deeppurple,4,00/deeppurple.jpg,4
4.2 album_artist
     find line with artist name in album_artist column
     change value in album_artist_token to id value, for example deeppurple
5. put edited MediaLibrary.sqlitedb back
6. delete MediaLibrary.db-shm and MediaLibrary.db-wal files
7. restart Music.app and enjoy.
ps if u can change image - PLS find and delete files from /private/var/mobile/Media/iTunes_Control/iTunes/Artwork/Caches folder
Cache create automatically

How do I manually insert track names from a homemade cd?

My daughter made a cd for me from her itunes collection. I now want to import it to mine but I only get track numbers. The gracenote data base doesn't recognize anything and I tried an advanced search to no avail. I assume there is a way to manually insert the information which will be extremely tedious and time consuming. I think I hate all the things that are supposed to make my life easier and more enjoyable. I spend more time trying to cope with it than I have enjoing it. Can anyone please help me?

If she makes a data CD (instead of an audioCD) it will have all the info when you import it.
Right click - Get info.
Select the info tab. Type the info you want

How do I insert multiple rows from a single form ...

How do I insert multiple rows from a single form?
This form is organised by a table. (just as in an excel format)
I have 20 items on a form each row item has five field
+++++++++++ FORM AREA+++++++++++++++++++++++++++++++++++++++++++++++++++++
+Product| qty In | Qty Out | Balance | Date +
+------------------------------------------------------------------------+
+Item1 | textbox1 | textbox2 | textbox3 | date +
+ |value = $qty_in1|value= &qty_out1|value=$balance1|value=$date1 +
+------------------------------------------------------------------------+
+Item 2 | textbox1 | textbox2 | textbox4 | date +
+ |value = $qty_in2|value= $qty_out1|value=$balance2|value=$date2 +
+------------------------------------------------------------------------+
+ Item3 | textbox1 | textbox2 | textbox3 | date +
+------------------------------------------------------------------------+
+ contd | | | +
+------------------------------------------------------------------------+
+ item20| | | | +
+------------------------------------------------------------------------+
+ + + SUBMIT + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Database Structure
+++++++++++++++++
+ Stock_tabe +
+---------------+
+ refid +
+---------------+
+ item +
+---------------+
+ Qty In +
+---------------+
+ Qty Out +
+---------------+
+ Balance +
+---------------+
+ Date +
+++++++++++++++++
Let's say for example user have to the use the form to enter all 10 items or few like 5 on their stock form into 4 different textbox field each lines of your form, however these items go into a "Stock_table" under Single insert transaction query when submit button is pressed.
Please anyone help me out, on how to get this concept started.

Hello,
I have a way to do this, but it would take some hand coding on your part. If you feel comfortable hand writing php code and doing manual database calls, specificaly database INSERT calls you should be fine.
Create a custom form using the ADDT Custom Form Wizard that has all the rows and fields you need. This may take a bit if you are adding the ability for up to 20 rows, as per your diagram of the form area. The nice thing about using ADDT to create the form is that you can setup the form validation at the same time. Leave the last step in the Custom Form Wizard blank. You can add a custom database call here, but I would leave it blank.
Next, under ADDT's Forms Server Behaviors, select Custom Trigger. At the Basic tab, you enter your custom php code that will be executed. Here you are going to want to put your code that will check if a value has been entered in the form and then do a database INSERT operation on the Stock_table with that row. The advanced tab lets you set the order of operations and the name of the Custom Trigger. By default, it is set to AFTER. This means that the Custom Trigger will get executed AFTER the form data is processed by the Custom Form Transaction.
I usually just enter TEST into the "Basic" tab of the Custom Trigger. Then set my order of operations in the "Advanced" tab and close the Custom Trigger. Then I go to the code view for that page in Dreamweaver and find the Custom Trigger function and edit the code manually. It's much easier this way because the Custom Trigger wizard does not show you formatting on the code, and you don't have to keep opening the Wizard to edit and test your code.
Your going to have to have the Custom Trigger fuction do a test on the submitted form data. If data is present, then INSERT into database. Here's a basic example of what you need to do:
In your code view, the Custom Trigger will look something like this:
function Trigger_Custom(&$tNG) {
if($tNG->getColumnValue("Item_1")) {
$item1 = $tNG->getColumnValue("Item_1");
$textbox1_1 = $tNG->getColumnValue("Textbox_1");
$textbox1_2 = $tNG->getColumnValue("Textbox_2");
$textbox1_3 = $tNG->getColumnValue("Textbox_3");
$date1 = $tNG->getColumnValue("Textbox_3");
$queryAdd = "INSERT INTO Stock_table
(item, Qty_In, Qty_Out, Balance, Date) VALUES($item1, $textbox1_1, $textbox1_2, $textbox1_3, $date1)"
$result = mysql_query($queryAdd) or die(mysql_error());
This code checks to see if the form input field named Item_1 is set. If so, then get the rest of the values for the first item and insert them into the database. You would need to do this for each row in your form. So the if you let the customer add 20 rows, you would need to check 20 times to see if the data is there or write the code so that it stops once it encounters an empty Item field. To exit a Custom Trigger, you can return NULL; and it will jump out of the function. You can also throw custom error message out of triggers, but this post is already way to long to get into that.
$tNG->getColumnValue("Item_1") is used to retrieve the value that was set by the form input field named Item_1. This field is named by the Custom Form Wizard when you create your form. You can see what all the input filed names are by looking in the code view for something like:
// Add columns
$customTransaction->addColumn("Item_1", "STRING_TYPE", "POST", "Item_1");
There will be one for each field you created with the Custom Form Wizard.
Unfortunately, I don't have an easy way to do what you need. Maybe there is a way, but since none of the experts have responded, I thought I would point you in a direction. You should read all you can about Custom Triggers in the ADDT documentation/help pdf to give you more detailed information about how Custom Triggers work.
Hope this helps.
Shane

How to manually eject a CD on my 24" iMac.

Dear guys,
Can anyone help to answer my question on how to manually eject a cd on my 24" imac. I inserted the Window XP Pro SP3 into my imac. Its started to run the os now cannot boot the system. Actually can anyone help to advise how to go about do the boot camp process. Great thanks.
Please help....

If the mouse routine does not work. on some Macs, there is a little manual trigger in the extreme top of the disc slot. Carefully trip it with something like a straightened paperclip. It is just a fraction of an inch inside.
Your post is a bit cryptic. Did you actually follow the BootCamp process or just insert this Windows disc?
There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage

How can I insert a comment into a PDF stream?

I am creating a PDF stream manually (long story, don't ask) and when
debugging the resulting PDF by looking at the raw PDF stream, it would
be really handy if I could tell which parts of the PDF stream came
from which parts of my code, so I was trying to find some way to
insert comments into the PDF stream.
I came up with this:
(my comment here) pop
which I thought would create a string object on the stack and then pop
it off, but this PDF code still confuses Adobe Reader.
Any suggestions on how I can insert stuff into the PDF stream that
doesn't affect Adobe Reader, but lets me distinguish different parts
of the PDF stream?
Thanks,
Chris

the best is to insert screenshot directly in keynote. If it's for a paper version save everything as pdf and compile with "combine pdf".

How do I insert chapter markers in iMovie '11?

In my various Google searches, I keep reading references to inserting chapter markers in iMovie, usually earlier versions. How can I manually insert chapter markers using iMovie '11? I really don't want to use iDVD, which apparently only lets you select how many minutes are between each chapter.

enable "show advanced tools" in iMovie preferences then you will see the little balloon indicated by the arrow.
drag it where you want to have your chapter in the project, give it a name, you're done.
when you'll export your movie and have it in idvd you'll automatically have the movie split in the chapters you've made.
Cheers,
Diego

How do I insert a video clip into the timeline?

Do you happen to know how I could insert a video clip into the middle of a movie like you do in FCP? Can you add tracks and insert the clip above the spot i need to change for each movie.
I don't want to render the whole movie (convert it into a MPeg2) each time.

No - DVD timelines are a little different to FCP. If you need to add a clip to the stream, you need to split the exisitng clip (you could trim it back to where you want to insert the new piece) and drag the new piece onto the same timeline. If you trimmed the existing piece then add another instance of it to the timeline and trim the new part from the left until you get to what you want as the out point.
If you have a collection of video clips on your DVDSP timeline, simply dragging a new one on will shuffle the others along appropriately. However, the audio will not shuffle with them, and you'll end up moving it all manually.
The very best thing is to create the timeline precisely as you want it in FCP and encode it to MPEG2 before bringing it in to DVDSP. Remember that DVDSP is not an editor, it is a place to assemble your work - it won't do anything remotely like FCP in that respect.

How do you insert an equation in a structured doc using DITA 1.2?

Good morning,
I'm currently in the process of structuring a set of unstructured user manuals using FM10 and the DITA 1.2 standard. I have my conversion table and templates setup and everything has been going well so far, but I can't figure out how to structure equations or insert new equations into a structured doc.
FrameMaker flags equations as an unsupported element (see below) no matter where the equation appears in the map.
I've looked through my element catalogue, but I can't find anything that seems like it would support an equation.
In some of my research, I've stumbled across something called a mathML element, but that doesn't seem to be an available option for me. Is this something that's only available if you are using DITA specialization?
If anyone has any ideas for how I can insert equations into my doc while keeping it inline with the DITA 1.2 standards, it would be greatly appreciated!
Thanks,
D'Arcy

Framemaker handles equations in a special way that is not supported by DITA out-of-the-box (DITA relies on MathML).
The only format that allows equations round-trip to XML and back to Frame is MIF (Maker Interchange Format) if the equations must be editable by FM's equation editor. This basically means that equations must be handled the same way frame graphics are handled and that requires some DITA spesialisation work.
Look this article:http://www.kynosarges.de/FrameDita.html#Equations
If you have a requirement that these equations should be usable outside FM environment, things get complicated. Framemaker can write equations out as graphics files instead of MIF, gif for example, but the equations cannot be edited any longer in Frame. It cannot write both during XML save.
The ultimate solution would a special XML writer/reader that would store both the MIF rendition and graphic rendition into a spesialised equation-element and let applications use either of them. Or that someone would create equation-MIF <-> MathML converter..
We've done a few customer projects where XML content authoring keeps equations as MIF files and publishing, for example, to web writes out equations as graphics.
BR, Martti

How / When Does a Device Jump from the 2.4 GHz Network to the 5.0 GHz Network

I understand -- through another thread that I started -- that the Guest Network will be both 2.4 GHz as well as 5.0 GHz....I would like to understand how / when does a device jump from the 2.4 GHz network to the 5.0 GHz network as I understand that: the 2.4 GHz network is slower but has greater range relative to the 5.0 GHz network.
Thx...

Bob Timmons wrote:
A device will connect to either the 5 GHz or 2.4 GHz band based on its own capabilities and distance in relation to the router.
So, if you have a 5 GHz capable device that is in close proximity to the router, it will connect at 5 GHz. If that device moves a few rooms away from the router, it will switch over to the 2.4 GHz band since that signal will be stronger....and likely faster at that location.
Think of 5 GHz as a "same room" connection or "line-of-sight" deal. It might be OK through one wall....if it is thin.
You do have an option to assign a separate name to the 5 GHz band in AirPort Utility. Once you have done that, simply "point" the device at the network with the 5 GHz name. Some users swear by this and some swear at this.
The downside to doing this......the device will likely try to hang on to the 5 GHz connection if it moves a few rooms away from the router.....at a location where the 2.4 GHz signal is stronger and likely faster.
Again, thanks for the very helpful response.
It occurs to me from reading the above that it makes sense to let the device (using your words) connect to either the 5 GHz or 2.4 GHz band based on its capabilities and distance in relation to the router as I can see / understand the downside and issue of manually pointing to or selecting a specific network.
The reason that I purchased an Apple router is the hope that it will work better than some of the other routers I have tried as far as the 5 GHz / 2.4 GHz dual banding is concerned because in most of these cases I have had to disable the 5 GHz band to maintain a reliable internet connection...hopefully the Aiport Extreme will not require me to do so [i.e. it will work]!
With respect to *BOTH* the Primary Network and the Guest Network being dual band I can only conclude that this work because there are essentially two separates networks [i.e. 10.o.x.x and 172.16.x.x] that are using the send / receive configuration capabilities.
Thx...

How to auto insert a number array with size of 20 into a named excel file with the positon is from A1 TO A20?i use lv6.1

can you give me a example vi for it ?thanks a lot!
how to auto insert a number array with size of 20 into a named excel file with the positon is from A1 TO A20?i use lv6.1

You don't need us to give you an example, as the example already comes with LV. Go to Help>>Find Examples and search for "excel". You will find an example called "write table to XL". You should note that the example doesn't do that exactly, because it writes a 2D array from 2 to N.
You can modify the example by using only one for loop (instead of nested loops) with a 1D array or by going into the Set Cell Value and modifying it to accept a second cell value for the Cell2 terminal and wiring in a 1D array instead of the single string. If you do modify it, be sure to save it under a different name, so you don't overwrite the original.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world!

How do you insert an electronically signed report as an appendix into a main report which will be signed electronically at a later date?

How do you insert an electronically signed report as an appendix into a main report which will be signed electronically at a later date?

You can add it as a file attachment. Exactly how you do this depends on the version of Acrobat you're using, but if you open the Attachments panel, you should see where you can add a file.

How do I insert my Edge Animation into Wordpress as an animated/interactive graphic

How do I insert my Edge Animation into Wordpress as an animated/interactive graphic?

Hi ColleenSyron,
Can you check out this video: http://tv.adobe.com/watch/create-like-crazy-with-adobe-edge/episode-5-spice-up-your-wordpr ess-site-with-edge-animate/
Thanks,
Preran

How do you insert live web pages in keynote?

How do you insert live web pages in keynote?

Insert a 2D Pie chart on the slide (Insert > Chart > 2D Pie), then place a circle from Shapes overlaid in the centre:

How to manually insert a jumper multisim

Similar Messages

Maybe you are looking for