HOW TO MAP IDOC TO XML

Hi,
I need to map IDOC to xml but the problem is I have 400 fields in IDOC which are to be mapped to 20 elements in XML.
As it a tedious process to go to 400 fields for each xml element.Is their any better way to find correct field in IDOC with very minial time rather going 400 fields for each xml element.
thanks
sreeram

hi,
>>1)Even SAP it self does not encourage to use ABAP >>MAPPING and
i dont know where you have read this, but ABAP mapping is one of the most popular/ most efficient and highly recomended by SAP. I have used it in tons of places.
>>2)More over Iam not ABAP resource.
you could also do a java mapping.
there is no other easy way if you are not doing abap/java mapping. you are then left with the only option of using the graphical editor.
cheers,
Naveen
Message was edited by: Naveen Pandrangi

Similar Messages

How to map Idoc fields with external file

Hi All,
How to map Idoc fields with external file.
I want to check the settings where Idoc fields are mapped with external file.
Thanks in advance.
Regards,
Govind.

If you have configured a fileport where on trigger of IDOC you are creating the file, you can look at the message type documentation and get the offset values for each field in each segment

How to convert idoc into xml/edifact

hi everyone just now i have started to work on edi, i want to kno how to convert idoc into xml/edifact. plz reply asap

Firstly, I will reply when and if I choose to. I do not require the asap nonsense at the end of your sentence.
EDIFACT - You will need a subsystem.
XML - I am not 100%. It may also depend on what version of SAP you are on. As I do not know if later versions of SAP can convert IDoc to XML.

How to map a deep xml structure to flat structure

Hi, I'm trying to map a deep xml structure to a flat file structure. See this:
<SalesPoint>
         <header>
              <idTx></idTx>
              <opCode></opCode>
         </header>
         <body>
          <DataSet>
               <codOperacion></codOperacion>
               <codCanalDeVenta></codCanalDeVenta>
               <cuitDeposito>
               <docMinorista>
               <fechaOperacion>
               <codCC>
               <Details>
                     <Dato>
                                    <nroSerieEquipo></nroSerieEquipo>
                        <codNMU></codNMU>
                        <codOrigenEquipo></codOrigenEquipo>
                        <codConcepto></codConcepto>
                         <codSegmento></codSegmento>
                        <motivoSiniestro></motivoSiniestro>
                     </Dato>
               </Details>
          </DataSet>
         </body>
</SalesPoint>
to:
<SalesPoint>
        <idTx></idTx>
        <opCode></opCode>
     <codOperacion></codOperacion>
     <codCanalDeVenta></codCanalDeVenta>
     <cuitDeposito></cuitDeposito>
     <docMinorista></docMinorista>
     <fechaOperacion></fechaOperacion>
     <codCC></codCC>
        <nroSerieEquipo></nroSerieEquipo>
        <codNMU></codNMU>
     <codOrigenEquipo></codOrigenEquipo>
     <codConcepto></codConcepto>
     <codSegmento></codSegmento>
     <motivoSiniestro></motivoSiniestro>
</SalesPoint>
Thanks in advance!!!!

I do not think this is a complex XML structure. All that you need to take care is about the contexts. How ever it is not possible to give u the complete mapping here. If you have tried mapping already and facing some issues.. please put it here.. so that some one can help you.
VJ

How to Map IDOC Extensions in LSMW

HI,
I am working on a conversion for uploading material master using IDOC Method, There is an extension in the IDOC can anyone tell me how to map the extensions in the LSMW.
ADVANCE Thanks
Guhapriyan Subrahmanyam

Hi guhapriyan,
if you have any extension associated with MATMAS then it will display when you press F4 on extension, form the list you can choose the extension.
and proceed ....
the extension is for custom fields ,for this you need extend the idoc. if you add the extension to it, in lsmw extension you can see them...
Regards
vijay

How to map idoc segment field E1IDB02-FIIKONTO with BSEG-ESRNR.

Hi,
I have searched for lot of threads in the forum , and also i tried myself but i am not able to map this fields segment with my logic, so please anyone kindly contribute in mapping idoc segment field with the logic given below:
idoc type :PAYEXT outbound idoc.
message type: PEXR2002
This is my logic: i need to populate the ISR number(BSEG-ESRNR ) in idoc segment field( E1IDB02-FIIKONTO)
DATA : str1 TYPE string,
      len1 TYPE i,
      len2 TYPE i,
      str2 TYPE string,
      str3 TYPE string.
str1 = '01-1234-4'. ---> BSEG-ESRNR "ISR Subscriber Number
REPLACE FIRST OCCURRENCE OF '-' IN str1 WITH '_'.
REPLACE ALL OCCURRENCES OF '-' IN str1 WITH space.
CONDENSE str1.
len1 = STRLEN( str1 ).
IF len1 LT '9'.
len2 = '9' - len1.
CASE len2.
   WHEN '1'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '00'.
   WHEN '2'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '000'.
   WHEN '3'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '0000'.
   WHEN '4'.
     REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '000000'.
   WHEN OTHERS.
ENDCASE.
ELSEIF len1 EQ '9'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH '0'.
ELSEIF len1 GT '9'.
REPLACE ALL OCCURRENCES OF '_' IN str1 WITH space.
CONDENSE str1.
ENDIF.
Thanks in Advance.

Resolved.

Mapping IDoc to XML file

hi,
I have to export production order data to an xml file and to do this I want to use an IDoc but I don't know how I can map an Idoc to an XML document after I created it. Please help me

Hi,
I created a custom IDoc for a production order and its segments, now I have to export this IDoc to an XML file at the same time to a print process which is start from an existing report and to do this I'd like to insert the code to fill the IDoc in an internal form of the existing report and than I could associate the IDoc to a message type that is associate to the function module "IDOCS_OUTPUT_IN_XML_FORMAT" to create the XML file from IDoc. can you tell me if I can proceed in this way to realize my project and how I can send my IDoc from the same form where I fill it. thank you

How to map IDoc segment with qualifiers

Hi everyone!
I have the following problem: In an IDoc of type DESADV01 there can be several segments of type E2EDS01. Each segment has a different qualifier, which is the value of the field SUMID in this case. My target structure (type EDIFACT) now has several segments, each again with a sort of qualifier. Now I have to map the values of certain source segments to the respective target segments.
Exaple (in XML format):
Source
<E1EDS01 SEGMENT="1">
    <SUMID>021</SUMID>
    <SUMME>0000000001.000</SUMME>
    <SUNIT>KGM</SUNIT>
</E1EDS01>
<E1EDS01 SEGMENT="1">
    <SUMID>022</SUMID>
    <SUMME>0000000001.000</SUMME>
    <SUNIT>KGM</SUNIT>
</E1EDS01>
Target
<S_MEA>
    <C_C502>
      <D_6313>N</D_6313>
    </C_C502>
    <C_C174>
      <D_6411>KGM</D_6411>
      <D_6314>1</D_6314>
    </C_C174>
</S_MEA>
<S_MEA>
    <C_C502>
      <D_6313>G</D_6313>
    </C_C502>
    <C_C174>
      <D_6411>KGM</D_6411>
      <D_6314>1</D_6314>
    </C_C174>
</S_MEA>
(i have omitted several details here, but I'm only interested in the general procedure anyway).
So in general the source segment with qualifier "021" should be mapped to a target structure with qualifier "N" etc.
How can this be done using standard XI mapping techniques?
Regards, Joerg

Hi everyone!
Thanks for your input data - unfortunately this wasn't quite what I was looking for. However I thik I solved my original problem and I just wanted to share this solution with you - maybe it helps others, maybe some of you have suggestions what I could do differently.
To sum up the requirement: There can be multiple input segments, each with a certain qualifier. These input segments have to be mapped to the target segments, respectively - however, the qualifiers change. There can be several segments with qualifiers that do not match the requirement, and required segments might be missing.
So here's what I came up with:
Use the qualifier of the source segments as an input to a <b>FixValues</b> function. In this function, map the desired qualifiers to the value <b>true</b>, use <b>false</b> as the default value. Map the output of the <b>FixValues</b> function to a <b>createIf</b> function and use this to create the desired output segment. This way, for each of the required segments, one target segment will be created. All other segments (with unwanted qualifiers) will be removed.
So far, this technique worked for me - do you have improvements/suggestions?
Regards, Joerg

How to Map Idoc-Orders05 Qualifier permitted values to a flat file Str

Hi All,
My scenario is IDoc-xi-flat file. I have a problem in mapping the respective qualifier value in IDoc to the flat file structure. I am using the function fix values in Message Mapping. Suggest how should the target field should look like to map to the qualifier.
Thanks
Gowri K.

hi,
can you tell a little bit more on what are you trying to achive?
do you only need one qualifier in file or all or what?
can you use the same structure as in IDOC ?
be a little more precise
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to map idoc segments to multiple output structures

Dear experts,
On Pi I need to map segments from an Idoc to 2 different outputstructures. My scenario is as follows:
incoming Idoc on PI -> if segment eq 'X' then map to outputstructure '1'; if segment eq 'Y' then map to outputstructure '2'
Idoc structure is as follows:
- 1 header segment
- 1..n detail segments (which I need to map to outputstructure 1)
- 1 summarisation segment (which I need to map to outputstructure 2)
Output needs to be a .txt file.
I would like to use the graphical message mapping on PI, how can I map the Idoc to multiple output structures?
Thanks in advance,
William

Hi
You can do 1:n multimapping
in message mapping in messages tab ..add both the structures in target tab and do the mapping
and in operation mapping add both the message interface on the target side
PLease go through this blog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

Mapping IDOC to XML - Context problem

Hello,
I am trying to map up to 2 segments from an ORDERS IDOC into one segment in my PO XML.
In the target PO XML document both segments UltimateCustomer and ParticipatingDealer are under the heading SalesOrderData.
<Header>
...<SalesOrderData>
.......<UltimateCustomer>
............<Name>
............<address>
....................<street>
....................<city>
......<ParticipatingDealer>
............<Name>
............<address>
....................<street>
....................<city>
So I only create the SalesOrderData segment if at least one of the two E1EDKA1 segments exists where PARVW = ZO or ZU then I want to repliate those segments into their target fields.
ZO - Ultimate Customer
ZU - Participating Dealer
When both values exist I am only getting the data from the first segment (ZO or ZU) but not both. With the following mapping.
If PARVW (IDOC Context) = ZO or PARVW (IDOC Context) = ZU ...CreateIf...SalesOrderData
If PARVW = ZO...CreateIf...UltimateCustomer.
If PARVW = ZU ...CreateIf...ParticipatingDealer.
I tried many context combinations to get both segments to appear but the only time I could get them both to appear is if I force the creation of SalesOrderData. (Constant[]...SalesOrderData). This of course creates a blank node when ZO and ZU do not exist. Which is not a good solution.
Any suggestions?
Thanks,
Matt

chk this:
Mapping of "Header":
PARVW(context IDOC)----
--------------------equals ----
Constant(ZO)
-------------------------------------OR-----IfWithoutElse(Constant()----then)--------collapseContext------HEADER
PARVW(context IDOC)----
--------------------equals ----
Constant(ZU)
Mapping of "UltimateCustomer":
PARVW----
--------------------equals ----IfWithoutElse(Constant()----then)-----removecontext---------UltimateCustomer
Constant(ZO)
Mapping of "ParticipatingDealer":
PARVW----
--------------------equals ----IfWithoutElse(Constant()----then)-----removecontext---------ParticipatingDealer
Constant(ZU)
Mapping of "name" under "UltimateCustomer":
PARVW----
---------------equals ----IfWithoutElse(Name(from source)---then)--removecontext----splitbyvalue(each value)--Name
Constant(ZO)
In the same way (like "Name" field mapping) proceed for the rest of the target fields....

How to map array to XML

Hi
i am making a Advance data grid with hierarichal data source.its working fine but now i need to use xml instead of that array.i tried alot but can not manage to conver that array to xml.so please convert that so that i can use that in my advance data grid without much change in code.
private var masterData:Array = [
{ TableName:"RatingDeductible",
children:[
{CompanyKey:1, StateCode:"ALL", LOBKey:1, ExpiryDate:2010-12-12, PerClaimALAEWithinLimitFactor:1.000, PerClaimALAEOutsideLimitFactor:1.100,AggregateALAEWithinLimitFactor:1.050,AggregateALAEOu tsideLimitFactor:1.150,Deductible:1000,IdentifierKey:1},
{CompanyKey:1, StateCode:"ALL", LOBKey:1, ExpiryDate:2010-12-12, PerClaimALAEWithinLimitFactor:1.000, PerClaimALAEOutsideLimitFactor:1.100,AggregateALAEWithinLimitFactor:1.050,AggregateALAEOu tsideLimitFactor:1.150,Deductible:1000,IdentifierKey:1},
{CompanyKey:1, StateCode:"ALL", LOBKey:1, ExpiryDate:2010-12-12, PerClaimALAEWithinLimitFactor:1.000, PerClaimALAEOutsideLimitFactor:1.100,AggregateALAEWithinLimitFactor:1.050,AggregateALAEOu tsideLimitFactor:1.150,Deductible:1000,IdentifierKey:1},
Waiting fo reply
Thanks and Regards
Vineet Osho

I do not think this is a complex XML structure. All that you need to take care is about the contexts. How ever it is not possible to give u the complete mapping here. If you have tried mapping already and facing some issues.. please put it here.. so that some one can help you.
VJ

How to map an large XML document to the XMLType with TopLink in JDev

Hello!
We need to map an XML document in the Java String to an XMLType column. If the XML document has less than 4000 characters, we have no problems by using the DirectToField mapping. However, once the XML document has more than 4000 characters, using the DirectToField mapping, we got the error: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.BatchUpdateException: ORA-01461: can bind a LONG value only for insert into a LONG column
Then we have tried to use the "Type Conversion" mapping, to map it to the database type (Clob or NClob --oracle.toplink.oraclespecific). we got:
Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: ORA-00932: inconsistent datatypes: expected NUMBER got CLOB
Error Code: 932
Any suggestions?
Thanks in advance!

Thanks Matt! It works fine by using DirectToXMLTypeMapping.
However, to get it work is not smooth. In particularly, we use Jdev in our project and Jdev has not included this feature yet. Therefore, I had to use the TopLink Workbench to create the descriptor file and cut&paste to the description file that generated by JDev. And also xdb.jar has to be part of the classpath.
Then I come to an question -- how can we take some features that only provided by the TopLink Workbench into the Jdev environment without having to hack around?
Thanks,
s.c.

How to map a complex XML message onto a flattened XSD for multi line insert

Hi Experts.
I have a webservice in my composite that takes an xml message that contains repeating complex type elements. The XSD is as follows:
<?xml version= '1.0' encoding= 'UTF-8' ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:XxInt003Stg="http://www.somewhere.co.uk/xxx/integration/int003Stage"
targetNamespace="http://www.somewhere.co.uk/xxx/integration/int003Stage" elementFormDefault="qualified">
<xsd:complexType name="InterfaceFileType">
<xsd:sequence>
<xsd:element name="FileName" type="xsd:string"/>
<xsd:element name="FileSource" type="xsd:string"/>
<xsd:element name="FileIdentifier" type="xsd:integer"/>
<xsd:element name="InterfaceInvoices" type="XxInt003Stg:InterfaceInvoicesType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="InterfaceInvoicesType">
<xsd:sequence>
<xsd:element name="InterfaceInvoice" type="XxInt003Stg:InterfaceInvoiceType"
maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="InterfaceInvoiceType">
<xsd:sequence>
<xsd:element name="SupplierNumber" type="xsd:string"/>
<xsd:element name="SupplierSite" type="xsd:string"/>
<xsd:element name="InvoiceNumber" type="xsd:string"/>
<xsd:element name="InterfaceInvoiceLines">
<xsd:complexType>
<xsd:complexContent>
<xsd:extension base="XxInt003Stg:InterfaceInvoiceLinesType">
<xsd:sequence>
<xsd:element name="InterfaceInvoiceLine"
type="XxInt003Stg:InterfaceInvoiceLineType"
maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:extension>
</xsd:complexContent>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="InterfaceInvoiceLinesType"/>
<xsd:complexType name="InterfaceInvoiceLineType">
<xsd:sequence>
<xsd:element name="LineAmount" type="xsd:decimal" nillable="false"/>
<xsd:element name="TaxAmount" type="xsd:decimal"/>
<xsd:element name="BusinessEntityReference" type="xsd:string"/>
<xsd:element name="AccountNumber" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="InterfacePayload">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="InterfaceFiles" type="XxInt003Stg:InterfaceFileType"
maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
When I try to push this through the database adapter after mapping the fields it inserts multiple rows but they are all the same values. I have put a for-each XSLT construct based on the lowest element in the XSD (Invoice Line) and allocated that at various places on the target tree structure but with no success.
The XSLT is as follows:
<xsl:template match="/">
<top:XxInt003InterfaceInvoiceStgCollection>
<top:XxInt003InterfaceInvoiceStg>
<top:fileName>
<xsl:value-of select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:FileName"/>
</top:fileName>
<top:fileSource>
<xsl:value-of select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:FileSource"/>
</top:fileSource>
<top:fileIdentifier>
<xsl:value-of select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:FileIdentifier"/>
</top:fileIdentifier>
<top:supplierNumber>
<xsl:value-of select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:InterfaceInvoices/inp1:InterfaceInvoice/inp1:SupplierNumber"/>
</top:supplierNumber>
<top:supplierSite>
<xsl:value-of select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:InterfaceInvoices/inp1:InterfaceInvoice/inp1:SupplierSite"/>
</top:supplierSite>
<top:invoiceNumber>
<xsl:value-of select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:InterfaceInvoices/inp1:InterfaceInvoice/inp1:InvoiceNumber"/>
</top:invoiceNumber>
<xsl:for-each select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:InterfaceInvoices/inp1:InterfaceInvoice/inp1:InterfaceInvoiceLines/inp1:InterfaceInvoiceLine">
<top:lineAmount>
<xsl:value-of select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:InterfaceInvoices/inp1:InterfaceInvoice/inp1:InterfaceInvoiceLines/inp1:InterfaceInvoiceLine/inp1:LineAmount"/>
</top:lineAmount>
</xsl:for-each>
<top:taxAmount>
<xsl:value-of select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:InterfaceInvoices/inp1:InterfaceInvoice/inp1:InterfaceInvoiceLines/inp1:InterfaceInvoiceLine/inp1:TaxAmount"/>
</top:taxAmount>
<top:businessEntityReference>
<xsl:value-of select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:InterfaceInvoices/inp1:InterfaceInvoice/inp1:InterfaceInvoiceLines/inp1:InterfaceInvoiceLine/inp1:BusinessEntityReference"/>
</top:businessEntityReference>
<top:accountNumber>
<xsl:value-of select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:InterfaceInvoices/inp1:InterfaceInvoice/inp1:InterfaceInvoiceLines/inp1:InterfaceInvoiceLine/inp1:AccountNumber"/>
</top:accountNumber>
</top:XxInt003InterfaceInvoiceStg>
</top:XxInt003InterfaceInvoiceStgCollection>
</xsl:template>
I am sure this is just something fundemantal I am doing, is it something to do with the inp1 bit of the XSLT? I get the feeling this should be looping somehow?
Thanks
Keith

Hi,
as I understand you try to transform 'InterfacePayload' (your XSD - just easier to read here)
InterfacePayload (1:1)
-- InterfaceFiles (1:N)
---- FileName (1:1)
---- FileSource (1:1)
---- FileIdentifier (1:1)
---- InterfaceInvoices (1:1)
------ InterfaceInvoice (1:N)
-------- SupplierNumber (1:1)
-------- SupplierSite (1:1)
-------- InvoiceNumber (1:1)
-------- InterfaceInvoiceLines (1:1)
---------- InterfaceInvoiceLine (1:N)
------------ LineAmount (1:1)
------------ TaxAmount (1:1)
------------ BusinessEntityReference (1:1)
------------ AccountNumber (1:1)
to 'XxInt003InterfaceInvoiceStgCollection' (extracted from your XSLT)
XxInt003InterfaceInvoiceStgCollection (1:1)
-- XxInt003InterfaceInvoiceStg (1:1)
---- fileName (1:1)
---- fileSource (1:1)
---- fileIdentifier (1:1)
---- supplierNumber (1:1)
---- supplierSite (1:1)
---- invoiceNumber (1:1)
---- lineAmount (1:N)
---- taxAmount (1:1)
---- businessEntityReference (1:1)
---- accountNumber (1:1)
In the 'xsl:for-each' construct
+<xsl:for-each select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:InterfaceInvoices/inp1:InterfaceInvoice/inp1:InterfaceInvoiceLines/inp1:InterfaceInvoiceLine">+
+<top:lineAmount>+
+<xsl:value-of select="/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:InterfaceInvoices/inp1:InterfaceInvoice/inp1:InterfaceInvoiceLines/inp1:InterfaceInvoiceLine/inp1:LineAmount" />+
+</top:lineAmount>+
+</xsl:for-each>+
- you are asking to iterate through all available 'inp1:InterfaceInvoiceLine' elements in the input XML document
- the value of the element 'top:lineAmount' (for each iteration) is being calculated as all values of available 'inp1:LineAmount' elements in the input XML document together
So, if you have ... lets say
- 4x 'inp1:InterfaceInvoiceLine' element in the input XML document, each containing one 'inp1:LineAmount' element ... with values {1, 2, 3, 4} respectively
- the output will be something like this
<top:lineAmount>1234</top:lineAmount>
<top:lineAmount>1234</top:lineAmount>
<top:lineAmount>1234</top:lineAmount>
<top:lineAmount>1234</top:lineAmount>
Why are you always querying from +/inp1:InterfacePayload/inp1:InterfaceFiles/...+ ?
I think ... all Xpath queries in your XSLT are wrong (they query something else than you think).
e.g.
- putting all file names together into one element (+/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:FileName+)
- putting all file sources together into one element (+/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:FileSource+)
- putting all invoice numbers together into one element (+/inp1:InterfacePayload/inp1:InterfaceFiles/inp1:InterfaceInvoices/inp1:InterfaceInvoice/inp1:InvoiceNumber+)
Best regards,
Martin.

How to map data in xml format to BAPIs tructures?

A webservice call to an external system from XI, is returning data to XI in xml format.
This needs to be formatted to map to the structure of BAPI from SAP.
I searched and found several threads pointing to do transformations.
But I am not sure where to start. So this thread is being posted.
Please help.
Thanks,
Ven

The thing is my data is being retrieved from webservice call a bit different.
here is the sample data that I need to map to two structures of BAPI - Housinginfo, Houseresponsersults.
<?xml version="1.0" encoding="utf-8" ?>
- <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <soap:Body>
- <GetResidentsResponse xmlns="http://empur.org/XLSWebSvc/XLS_Interface">
- <GetResidentsResult>
- <Residents xmlns="">
- <Resident LastName="Xyz" FirstName="Abced" MiddleInitial="T" STX="1234567" Houseid="45622" SubDivName="xyz homes">
- <Houses HousesName="villa ben" HousesId="1550" HousesStatus="P" HousesStatusDate="09/22/2009 15:26:54" HousesScore="90">
<Street StreetCode="2538" StreetName="Victoria" StreetStatus="c" StreetStatusDate="09/22/2009 12:25:38" />
- <Street StreetCode="2539" StreetName="Vicotria Ln" StreetStatus="p" StreetStatusDate="09/22/2009 15:26:54" StreetScore="90" ProctorID="3572" OwnerName="DONNA Perl">
<HomeInteractions HomeNum="25873" ResidentResp="C" LayoutLawn="C" Judged="c" />
<HomeInteractions HomeNum="25884" ResidentResp="B" LayoutLawn="B" Judged="c" />
<HomeInteractions HomeNum="25896" ResidentResp="B" LayoutLawn="B" Judged="c" />
<HomeInteractions HomeNum="25918" ResidentResp="D" LayoutLawn="D" Judged="c" />
<HomeInteractions HomeNum="25919" ResidentResp="D" LayoutLawn="D" Judged="c" />
<HomeInteractions HomeNum="25924" ResidentResp="A" LayoutLawn="A" Judged="c" />
<HomeInteractions HomeNum="25948" ResidentResp="t" LayoutLawn="t" Judged="c" />
<HomeInteractions HomeNum="25952" ResidentResp="C" LayoutLawn="A" Judged="w" />
<HomeInteractions HomeNum="25953" ResidentResp="C" LayoutLawn="C" Judged="c" />
<HomeInteractions HomeNum="25954" ResidentResp="D" LayoutLawn="D" Judged="c" />
</Street>
</Houses>
</Resident>
</Residents>
</GetResidentsResult>
</GetResidentsResponse>
</soap:Body>
</soap:Envelope>

HOW TO MAP IDOC TO XML

Similar Messages

Maybe you are looking for