How to map same sales unit for two keyfigures

hi,
i am using two key figure with reference of one sales unit(0SALESUNIT) but in update rules i am getting only one key figure the other key figure is not showing in update rules.
i want to use the same sales unit for two different key figure.
How to do it.
Ankit

Hi Ankit,
if you have 2 key figures that are not defined as a reference of another key figure, but just use 0SALES_UNIT as their unit, you should have no problems with the update rules. The system will show both key figures in the update rule (or transformation).
Also then the logic you map for 0SALES_UNIT will apply to both key figures in a transformation. For an update rule the same applies, unless you map the 2 key figures differently on purpose.
I am not sure if your question was saying that you have defined a key figure as a reference to another key figure. If you have that situation, you should still be fine. If not try the approach above, after all there is not much benefit in creating a reference key figure in contract to creating a reference Characteristic (sharing master data, etc.)
Best,
Ralf

Similar Messages

How to use same RESULT SET for two different events

hello friends,
I need to use same result set for two different events. How to do it.
here My code,
private void jComboBox1ItemStateChanged(java.awt.event.ItemEvent evt) {
// TODO add your handling code here:
try
String selstate,selitem;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con=DriverManager.getConnection("jdbc:odbc:tourismdatasource","sa","");
selstate="select * from tab_places where state=?";
PreparedStatement ps=con.prepareStatement(selstate);
ps.setString(1, jComboBox1.getSelectedItem().toString().trim());
ResultSet rs=ps.executeQuery();
if(rs.next())
jTextField1.setText(rs.getString("place_ID"));
jTextField2.setText(rs.getString("place_name"));
jTextField3.setText(rs.getString("category"));
byte[] ba;
ba=rs.getBytes("image");
ImageIcon ic = new ImageIcon(ba);
jLabel6.setIcon(ic);
in=true;
catch(ClassNotFoundException cfe){JOptionPane.showMessageDialog(null, cfe.getMessage());}
catch(SQLException sqe){JOptionPane.showMessageDialog(null,sqe.getMessage());}
Now i need the same Result Set(rs), in another event(jButton6ActionPerformed),
private void jButton6ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
} how do i get dat resultset,
help me out

One post wasn't enough?
{color:0000ff}http://forum.java.sun.com/thread.jspa?threadID=5246634{color}
db

How to use same jco destinations for two DCS

Hi,
I have a scenario where two dcs are using the same function module so i have a doubt that can we make jco destinations different for two dcs or not,plz help me
Thanks,
Santhosh.

Vanama
JCO Destination names are associated with models and not DCs. You can use same or different JCO destination names across different models.
Typically if you are using a common set of function modules(RFCs) you might decide to create one or more model (each model consisting of logically related RFCs)in one DC and use it accross different DCs(By declaring the usage of the DC in other DC and declaring model usage in a particular component). This not only will save build time during design process, but will also bring in modularity and reusability. But its purely a design decision you need to make based on your requirement.
kk

How to achieve same start date for two ATO Items- req to built together

We have two ATO Items and these to be built & shipped together which have different leadtimes, How we can have achieve same start date when we release from ASCP.
E.g: ATO_Model1*24234 SO Line 1, the rolled up LT=10Days
ATO_Model2*325325, the rolled up LT=3
So, under normal scenario ASCP will suggest two different release dates based on LT. So, I would like to start both Job togther considering the max leadtime.
Hoping for your expert advice.
Thanks

Hi,
Please check Vendor Master data: FK02 ->company code data -> Payment transaction accounting: unflag 'individual payment'.
Make a test and let me know if it's okay.
regards

How to Use Same Navigation Panal for two different query

Hello,
My requirement is I have to display three different report in same web template in three different tab.
I have created a custom web template with tab.
in each tab i have assigned three different analyser table and assigned three different report in each data provider. once I run the report that works fine, each tab is displying each report seperately.
The problem I am having here with navigation panal. Navigation panal is working ok for 1st report, but when I go to the 2nd tab for 2nd report nev attribute itself is not displying. is there any special setting that i am missing?
If any one know about the same pls help me
Thanks
Samit

Hi
When u select the Generic navigational block to ur template. select that and right click go to properties, in the lift side of u web item will come in that last but one option is Affected data providers is there double click on the list u will get the option
Shashi

How to map single input value to Two columns of Database table using format file of Bulk Copy Process

Hi All,
Am using OPENROWSET to load the file data into table, here the problem is i need to map same input value to two different columns of table, As format file doesn't allow the duplicate numbers am unable to insert same value to two columns, please help me to
find a solution for this.
i can use only OPENROWSET because i need to insert some default values also which come based on file. only the problem is how to map same input value to two different columns of table. please give me the suggestions.
Thanks,
Sudhakar

From what you say:
INSERT tbl(col1, col2)
SELECT col1, col1
FROM OPENROWSET(....)
But I guess it is more difficult. You need to give more details. What sort of data source do you have? What does your query look like? The target table?
Erland Sommarskog, SQL Server MVP, [email protected]
Hi Erland,
Thanks for your response
my source file is text file with | symbol separate for ex:
1002|eTab |V101|eTablet|V100|Logic|LT-7|Laptops|SCM
Database table have columns like
column1,column2,column3...etc, now i need to insert same value from input file into two columns for ex:
the eTab value from text file has to be insert into column2 and column3 of
table
we cannot change format file like below one
for the above situation how can we insert eTab into column2 and column3
Thanks,
Sudhakar.

Same number range for two different series groups?

Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.

With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop

HT204053 Can you use the same Apple ID for two devices ?

I have an MacPro and I am buying an iPad. Can you use the same Apple ID for two devices or should I create an new AppleID for the ipad?

Welcome to Apple Support Communities
The Apple ID purpose is to have the same data in all your devices and share your purchases among all your devices, so you can use your Apple ID in both devices

HT4759 can you use the same apple id for two phones on the cloud?

can you use the same apple id for two phones on the same verizon account and if so can you keep there contacts etc. separate?

If you want to keep your contacts and other data you sync with iCloud separate, you'll have to create separate iCloud accounts, which will require different IDs. If you share the same iCloud account/ID on multiple devices, the synced data will be merged and will appear on all devices syncing with the shared account.
You can still share the same ID for iTunes; it doesn't have to be the same as the one used for iCloud.

If i use the same apple id for two devices can i see them both on the findmyiphone?

If i use the same apple id for two devices can i see them both on the findmyiphone?
all the best
Luca

Yep.

How to get subordinate org units for a given org unit within specific dates

hi,
How to get subordinate org units for a given org unit within specific dates

Use the following Func module ..
HRWPC_RFC_STRUCTURE_GET
*--Get the sub org.unts for the given selection.
    CALL FUNCTION 'HRWPC_RFC_STRUCTURE_GET'
      EXPORTING
        ROOT           = root_org   <-- Give the Org unit
        EVPATH         = 'O-O_DOWN'
        BEGDA          = s_date-low
        ENDDA          = s_date-high
      TABLES
        T_OBJEC        = t_objec
        T_STRUC        = t_struc
      EXCEPTIONS
        NOTHING_FOUND = 1
        INTERNAL_ERROR = 2
        OTHERS         = 3.
    IF SY-SUBRC <> 0.
      MESSAGE i000 WITH 'No Sub Orgunits for ' s_objid-low.
    else.
*--Prepare final sub org.units tabl.
      loop at t_objec.
        if t_objec-objid ne s_objid-low.
          it_orgunit = t_objec-objid.
          it_orgunit-begda   = t_objec-begda.
          it_orgunit-endda   = t_objec-endda.
          APPEND it_orgunit.
        endif.
      endloop.
    endif.

Can I use same result set for two queries?

Hi,
Can I use the same result set for two queries?
For example:
ResultSet rs = null;
rs = ps.executeQuery(query1);
while (rs.next()) {
rs = ps.executeQuery(query2);
while (rs.next()) {
Is it OK to use? or Is there any preformance issues?
Appreciate your help.
Thanks in advance.
Prasad Vagolu

Sure. You have a variable of ResultSet type. First you create a ResultSet and assign it to that variable. Then later you create another ResultSet and assign it to that same variable. Assigning an object reference to a variable takes essentially no time, and at any rate it isn't any faster to assign it to a different variable. Also, no matter whether you use one variable or two, you are still creating two ResultSets.
However, you really should be closing your ResultSets after you finish using them. That's nothing to do with the assigning-to-a-variable question.

How can I define same Price Conditions for two different Sales Deals ??

I need to define for the same price condition, lets say ZPMP, two different values or condition records, for two different sales deals and the same valid dates
For example, Sales deal 1, ZPMP equal to USD 15 and valid dates from 04/15/08 to 04/30/08.
Another condition record for Sales deal 2, ZPMP equal to USD 20 and valid dates from 04/15/08 to 04/30/08
How can I do this.
Thanks in advance.

While creating condition tables, you have the option to create different key combinations. So if you want the system to take different condition records for different sales deals, there has to be a point of differentiation between those 2 sales deals.
This can be done in one of the following ways:
by giving customer specific prices
by giving material specific prices for a particular customer etc
All this can be defined as different key combinations while creating the condition tables. For each key combination, you can specify different condition records, so that the system is able to pull prices according to the requirement.
But if the sales deals are entirely similar (that is even the validity dates, delivery dates etc are also same), and there is no differentiating factor, then you will have to manually input the prices.
Do get back if you require more clarification. Please reward points if useful.
Regards,
Swapna

How to create a single delivery for two sales orders?

Hi Experts,
I need to create one delivery for two sales orders. But it fails.
The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
It not happened because of incoterms.? different dates
Kindly help regarding this.
Thanks
Raghu

Prerequisite for Grouped delivery
1. Header data should be same like Inco terms,Payment terms
Go to VL10A
Enter the sales order Numbers and execute
Select the sales order Nos for the group delivery and select "Background" Tab in Tool Menu Bar
If delivery is created coloured line items will get generated
Check the log for delivery docuements
Check and confirm
Senthils

How to use the same the same apple id for two devices?

I got an ipad 3 and i created my apple id for the first time but now am getting an ipod touch 5g and i wanna know how is possible to the same apple id for my two devices, will be photos transfer, apps and stuffs, also i use imessage alot so when somebody sends a message who will get it the ipad or the ipod?

"also i use imessage alot so when somebody sends a message who will get it the ipad or the ipod?"
Both
You can sync as many ipods/ipads/iphones as you like to one computer.

How to map same sales unit for two keyfigures

Similar Messages

Maybe you are looking for