How to map single input value to Two columns of Database table using format file of Bulk Copy Process

Hi All,
Am using OPENROWSET to load the file data into table, here the problem is i need to map same input value to two different columns of table, As format file doesn't allow the duplicate numbers am unable to insert same value to two columns, please help me to
find a solution for this.
i can use only OPENROWSET because i need to insert some default values also which come based on file. only the problem is how to map same input value to two different columns of table. please give me the suggestions.
Thanks,
Sudhakar

From what you say:
INSERT tbl(col1, col2)
SELECT col1, col1
FROM OPENROWSET(....)
But I guess it is more difficult. You need to give more details. What sort of data source do you have? What does your query look like? The target table?
Erland Sommarskog, SQL Server MVP, [email protected]
Hi Erland,
Thanks for your response
my source file is text file with | symbol separate for ex:
1002|eTab |V101|eTablet|V100|Logic|LT-7|Laptops|SCM
Database table have columns like
column1,column2,column3...etc, now i need to insert same value from input file into two columns for ex:
the eTab value from text file has to be insert into column2 and column3 of
table
we cannot change format file like below one
for the above situation how can we insert eTab into column2 and column3
Thanks,
Sudhakar.

Similar Messages

Based on input file i need to update default values to some columns of database table using bulk copy process

Hi Team,
Am using BULK INSERT Format file option to load data into table from .txt file here am facing an issue i.e ibased on input file i need to insert default values to some columns of table so we can not declare it on table level, Can we give default values in
format file ? if we can give how it is ? or Any alternate possibilities to this scenario instead of BULK INSERT ?
Thanks,
Sudhakar

Thanks for your response, here i don't have any rights to change table structure the table is created by different team, my work is to load data from file to table. Is there any chance to supply default values by*XML* format file instead of *.fmt* file
please let me know the possibility.
Again, no. If you want to supply default values that are not present in DEFAULT constraints in the table definition, you will need to write your own code. There are plentyfull of options, and I have mentioned some already.
Here are some more:
* Table-valued parameters, see here for examples:
http://www.sommarskog.se/arrays-in-sql-2008.html
* Use BULK INSERT to load data to a staging table, and then apply the default values when you copy from staging to target.
Erland Sommarskog, SQL Server MVP, [email protected]

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

Need to compare values in two columns of one table against values in two columns in another table

Hi, as the title reads, I'm looking for an approach that will allow me to compare values in two columns of one table against values in two columns in another table.
Say, for instance, here are my tables:
Table1:
Server,Login
ABCDEF,JOHN
ABCDEF,JANE
FEDCBA,SEAN
FEDCBA,SHAWN
Table2:
Server,Login
ABCDEF,JOHN
ABCDEF,JANE
FEDCBA,SHAWN
In comparing the two tables, I'd like my query to report the rows in table1 NOT found in table2. In this case, it'll be the 3rd row of table one:
Server,Login
FEDCBA,SEAN
Thanks.

create table Table1([Server] varchar(50), Login varchar(50))
Insert into Table1 values ('ABCDEF','JOHN'),('ABCDEF','JANE'),('FEDCBA','SEAN'),('FEDCBA','SHAWN')
create table Table2([Server] varchar(50), Login varchar(50))
Insert into Table2 values ('ABCDEF','JOHN'),('ABCDEF','JANE'), ('FEDCBA','SHAWN')
select [Server] ,Login from Table1
Except
select [Server] ,Login from Table2
select [Server] ,Login from Table1 t1
where not exists(Select 1 from Table2 where t1.[Server] = t1.[Server] AND Login=t1.Login)
drop table Table1,Table2

How to map single context value attribute to multiple value attributes?

Hello,
is there any way to map a single value attribute
from view's context into several value attributes
in controller's context?
The business context of what I want to achieve
is the following: I have a view which can be called
in two modes: read only (RO) and read-write (RW).
The input parameters to the view are the same for
both modes, however when in RO mode, the view calls
a different set of web services than when called
in RW mode. Before calling each of the web services
I need to populate their context value attributes
with appropriate input values.
I know I can do it in Java code, but is it possible
to do it without any programming (doing it in the
source code is prone to errors)?
Any help highly appreciated.
Greetings,
Tomek.

Hi Kishore,
than you very much for your kind help.
I have already created a value attribute of type
boolean and mapped it into the read-only property
of the UI elements. This however does not solve all
of the problems... I will describe it with an
example:
Let's say the form I want to implement will be
used to: create (read-write mode), update (read-
write mode) or show (read-only mode) customer's
data. The customer's data is complex (lots of
data, including tree structures).
The problem is that:
- when the form is called in read-only mode,
it should populate its fields with values
provided by the getCustomerData web service,
- when the form is called to create a new
customer (in read-write) mode, it should
not use the getCustomerData web service.
Instead it should map the input values
entered by the user into input parameters
of the createNewCustomer web service,
- when the form is called to update customer's
data, it should first display values returned
by the getCustomerData web service, and then
it should map the modified values entered by
the user into input parameters of the
updateCustomer web service,
In all the above cases I must map my view's
context data to different controller's context
elements. Doing it directly in the source code
is not a nice solution. Is there any other
way to achieve this?
Calling a form in different modes in not an
unusual thing, so I was hoping that maybe
there are any built-in mechanisms that would
solve the obove problem...
Greetings,
Tomek.

How to get the input value as a columns headings of the kye figer

Dear all,
the senario is i have keyfiger heading like DESPATCHES MADE ON (0CALDAY) and CUMMULATIVE DESPATCHES FOR (0CALMONTH), the 0CALDAY is the input value of the report. so how to get the value of the 0CALDAY and 0CALMONTH in the heading name of the key figer.
I really appreciate for any help on this.
wil assign pts for sure...
thanks
regards
Mohan

Dear Venkat Ambati,Sumit Singn,Masi dandavate,
thanks for reply.....
ya got u r value able inputs but i don't no how to get the variable value to the column heading, if u guy's having any doc's means plz send me the same, my mail id is [email protected] or [email protected]
thanks n regards
Mohan

How to write a procedure to load the data into a table using xml file as input to the procedure?

Hi,
Iam new to the xml,
can u please anyone help me how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>.
Regards,
vikram.

here is the your XML parse in 11g :
select *
from xmltable('//Entity' passing xmltype
'<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>
') columns
"dcode" varchar2(4000) path '/Entity/dcode',
"ddesc" varchar2(4000) path '/Entity/ddesc',
"reauthflag" varchar2(4000) path '/Entity/reauthflag'
dcode ddesc reauthflag
0 (I87)Other disorders of veins - postphlebitic syndrome 0
0 (J04)Acute laryngitis and tracheitis 0
0 (J17*)Pneumonia in other diseases - whooping cough 0
SQL>
Using this parser you can create procedure as
SQL> create or replace procedure myXMLParse(x clob) as
2 begin
3 insert into MyXmlTable
4 select *
5 from xmltable('//Entity' passing xmltype(x) columns "dcode"
6 varchar2(4000) path '/Entity/dcode',
7 "ddesc" varchar2(4000) path '/Entity/ddesc',
8 "reauthflag" varchar2(4000) path '/Entity/reauthflag');
9 commit;
10 end;
11
12 /
Procedure created
SQL>
SQL>
SQL> exec myXMLParse('<?xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>');
PL/SQL procedure successfully completed
SQL> select * from MYXMLTABLE;
dcode ddesc reauthflag
0 (I87)Other disorders of veins - postphlebitic syndrome 0
0 (J04)Acute laryngitis and tracheitis 0
0 (J17*)Pneumonia in other diseases - whooping cough 0
SQL>
SQL>
Ramin Hashimzade

How to pick max value from a column of a table using cursor and iteration

Hello Everybody
I have a table loan_detail
and a column in it loan_amount
now i want to pick values from this table using cursor and then by using iteration i want to pick max value from it using that cursor
here is my table
LOAN_AMOUNT
100
200
300
400
500
5600
700i was able to do it using simple loop concepts but when i was trying to do this by using cursor i was not able to do it .
Regards
Peeyush

SQL> SELECT MAX(sal) Highest_Sal,MIN(sal) Lowest_Sal FROM emp;
HIGHEST_SAL LOWEST_SAL
       5000        800
SQL> set serverout on
SQL> DECLARE
2    TYPE tmp_tbl IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
3    sal_tbl tmp_tbl;
4    CURSOR emp_sal IS
5      SELECT sal FROM emp;
6    counter INTEGER := 1;
7 BEGIN
8    FOR i IN emp_sal LOOP
9      sal_tbl(i.sal) := counter;
10      counter := counter + 1;
11    END LOOP;
12    DBMS_OUTPUT.put_line('Lowest SAL:' || sal_tbl.FIRST);
13    DBMS_OUTPUT.put_line('Highest SAL:' || sal_tbl.LAST);
14 END;
15 /
Lowest SAL:800
Highest SAL:5000
PL/SQL procedure successfully completed.
SQL> Even smaller
SQL> DECLARE
2    TYPE tmp_tbl IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
3    sal_tbl tmp_tbl;
4    CURSOR emp_sal IS
5      SELECT sal FROM emp;
6    counter INTEGER := 1;
7 BEGIN
8    FOR i IN emp_sal LOOP
9      sal_tbl(i.sal) := 1;
10    END LOOP;
11    DBMS_OUTPUT.put_line('Lowest SAL:' || sal_tbl.FIRST);
12    DBMS_OUTPUT.put_line('Highest SAL:' || sal_tbl.LAST);
13 END;
14 /
Lowest SAL:800
Highest SAL:5000
PL/SQL procedure successfully completed.
SQL> Edited by: Saubhik on Jan 5, 2011 4:41 PM

How do i display input values (POV) for a table control field

Hi guyz !
How do i display input values (POV) for a field in table control,
i mean when user presses F4 on a table control field.
Please help.
Thanks
jahan

PROCESS ON VALUE-REQUEST( F4 ) statement
Code to demonstrate how to perform a manual value help(F4) on a particular field using the PROCESS ON VALUE-REQUEST statement and how to return values back to a table control on the screen. For standard screen fields simply move the value to the appropriate screen field name.
* Screen flow logic........
PROCESS BEFORE OUTPUT.
*MODULE PBO_MODULE.
PROCESS AFTER INPUT.
*MODULE PAI_MODULE.
PROCESS ON VALUE-REQUEST. "F4
FIELD EKPO-EBELP MODULE help_ekpo.
MODULE help_ekpo INPUT.
**Transport values to table dynpro/screen table control
DATA: l_stepl LIKE sy-stepl,
        l_indx LIKE sy-stepl.
DATA: dynpfields        LIKE dynpread OCCURS 5 WITH HEADER LINE.
* Adjust for scroling within table control
CALL FUNCTION 'DYNP_GET_STEPL'
    IMPORTING
      povstepl        = l_stepl
    EXCEPTIONS
      stepl_not_found = 0
      OTHERS          = 0.
l_indx = tc_ekpotable-top_line + l_stepl - 1.
          "tc_ekpotable should already have been declared
REFRESH dynpfields.
CLEAR   dynpfields.
dynpfields-fieldname = 'EKPO-EBELN'.
dynpfields-fieldvalue = '00010'   "wa_ekpo-ebeln.
dynpfields-stepl      = l_stepl.
APPEND dynpfields.
dynpfields-fieldname = 'EKPO-EBELP'.
dynpfields-fieldvalue = '00020'   "wa_ekpo-ebelp.
dynpfields-stepl      = l_stepl.
APPEND dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname     = 'SAPLZZ_EKKO'    "Program name
      dynumb     = '0100'           "Screen number
    TABLES
      dynpfields = dynpfields
    EXCEPTIONS
      OTHERS     = 0.
ENDMODULE.                 " help_ekpo INPUT
reward points if it is usefull ..
Girish

How do I pass input values from a html page to a jsf page

hi,
In my project,for front view we have used html pages.how can I get input values from that html page into my jsf page.for back end purpose we have used EJB3.0
how can I write jsf managed bean for accessing these entities.we have used session facade design pattern and the IDE is netbeans5.5.
pls,help me,very urgent
thanx in advance

Simplest way is to rewrite html page into jsf page.
You can use session bean in your managed bean like this:
import javax.naming.Context;
import javax.naming.InitialContext;
public class ManagedBean {
private Context ctx;
private Object res;
// session bean interface
private Service service;
          public ManagedBean() {
            try{
                 ctx = new InitialContext();
                 res = ctx.lookup("Service");
                 service = (Service) res;
           catch(Exeption e){
}Message was edited by:
m00dy

How to correct a double value to two decimal places

hi,
How to correct a double value to two decimal places
eg.
double tt=100.100032
i want to correct to 2 decimal places
ie tt=100.10
regards,
jagan

Check my other reply on the other thread. Please don't cross-post.

How to update field values in a database table using module pool prg?

hi
how to update field values in a database table using module pool prg?
we created a customized table, and we put 2 push buttons in screen painter update and display.
but update is not working?
data is enter into screen fields and to internal table, but it is not updated in database table.
thanks in adv
vidya

HI,
we already used the update statement. but its not working.
plz check this.
*& Module Pool ZCUST_CALL_REC
PROGRAM ZCUST_CALL_REC.
TABLES: ZCUST_CALL_REC,ZREMARKS.
data: v_kun_low like ZCUST_CALL_REC-kunnr ,
 v_kun_high like ZCUST_CALL_REC-kunnr,
 v_bud_low like ZCUST_CALL_REC-budat,
 v_bud_high like ZCUST_CALL_REC-budat.
ranges r_kunnr for ZCUST_CALL_REC-kunnr .
ranges r_budat for zcust_call_rec-budat.
DATA: ITAB TYPE STANDARD TABLE OF ZCUST_CALL_REC WITH HEADER LINE,
 JTAB TYPE STANDARD TABLE OF ZREMARKS WITH HEADER LINE.
*data:begin of itab occurs 0,
 MANDT LIKE ZCUST_CALL_REC-MANDT,
 kunnr like ZCUST_CALL_REC-kunnr,
 budat like ZCUST_CALL_REC-budat,
 code like ZCUST_CALL_REC-code,
 remarks like ZCUST_CALL_REC-remarks,
 end of itab.
*data:begin of Jtab occurs 0,
 MANDT LIKE ZCUST_CALL_REC-MANDT,
 kunnr like ZCUST_CALL_REC-kunnr,
 budat like ZCUST_CALL_REC-budat,
 code like ZCUST_CALL_REC-code,
 remarks like ZCUST_CALL_REC-remarks,
 end of Jtab.
CONTROLS:vcontrol TYPE TABLEVIEW USING SCREEN '9001'.
CONTROLS:vcontrol1 TYPE TABLEVIEW USING SCREEN '9002'.
*start-of-selection.
*& Module USER_COMMAND_9000 INPUT
 text
MODULE USER_COMMAND_9000 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'ENQUIRY'.
perform multiple_selection.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9001'.
WHEN 'UPDATE'.
 perform append_CUSTOMER_code.
 PERFORM SELECT_DATA.
 call screen '9002'.
 perform update on commit.
WHEN 'DELETE'.
 perform append_CUSTOMER_code.
 PERFORM SELECT_DATA.
 call screen '9002'.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module STATUS_9000 OUTPUT
 text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9001 INPUT
 text
MODULE USER_COMMAND_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
endcase.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Module STATUS_9001 OUTPUT
 text
MODULE STATUS_9001 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9002 INPUT
 text
module USER_COMMAND_9002 input.
CASE sy-ucomm.
 WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
 SET SCREEN 0.
 LEAVE SCREEN.
 CLEAR sy-ucomm.
 WHEN 'UPDATE'.
 perform move_data.
 UPDATE ZCUST_CALL_REC FROM TABLE ITAB.
 IF SY-SUBRC = 0.
 MESSAGE I000(0) WITH 'RECORDS ARE UPDATED'.
 ELSE.
 MESSAGE E001(0) WITH 'RECORDS ARE NOT UPDATED'.
 ENDIF.
WHEN 'DELETE'.
 perform move_data.
 DELETE ZCUST_CALL_REC FROM TABLE ITAB.
 IF SY-SUBRC = 0.
 MESSAGE I000(0) WITH 'RECORDS ARE DELETED'.
 ELSE.
 MESSAGE E001(0) WITH 'RECORDS ARE NOT DELETED'.
 ENDIF.
endcase.
endmodule. " USER_COMMAND_9002 INPUT
*& Module STATUS_9002 OUTPUT
 text
module STATUS_9002 output.
SET PF-STATUS 'ZCUSTOMER1'.
SET TITLEBAR 'xxx'.
endmodule. " STATUS_9002 OUTPUT
*& Module update_table OUTPUT
 text
module update_table output.
 move itab-MANDT to zcust_call_rec-MANDT.
 move itab-kunnr to zcust_call_rec-kunnr.
 move itab-budat to zcust_call_rec-budat.
 move itab-code to zcust_call_rec-code.
 move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
endmodule. " update_table OUTPUT
***Selection Data
FORM SELECT_DATA.
SELECT mandt kunnr budat code remarks FROM zcust_call_rec INTO
 table itab
 WHERE kunnr IN r_kunnr AND BUDAT IN R_BUDAT.
ENDFORM.
****append vendor code
FORM APPEND_CUSTOMER_CODE.
clear r_kunnr.
clear itab.
clear r_budat.
refresh r_kunnr.
refresh itab.
refresh r_kunnr.
IF r_kunnr IS INITIAL
 AND NOT v_kun_low IS INITIAL
 AND NOT v_kun_high IS INITIAL.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = v_kun_low
 IMPORTING
 OUTPUT = r_kunnr-low.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = v_kun_high
 IMPORTING
 OUTPUT = r_kunnr-high.
 r_kunnr-option = 'BT'.
 r_kunnr-sign = 'I'.
 append r_kunnr.
 PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
 AND NOT v_kun_low IS INITIAL
 AND v_kun_high IS INITIAL.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = v_kun_low
 IMPORTING
 OUTPUT = r_kunnr-low.
 r_kunnr-SIGN = 'I'.
 r_kunnr-OPTION = 'EQ'.
 APPEND r_kunnr.
 PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
 AND v_kun_low IS INITIAL
 AND NOT v_kun_high IS INITIAL.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = v_kun_low
 IMPORTING
 OUTPUT = r_kunnr-low.
 r_kunnr-SIGN = 'I'.
 r_kunnr-OPTION = 'EQ'.
 APPEND r_kunnr.
 PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
 AND v_kun_low IS INITIAL
 AND v_kun_high IS INITIAL.
 IF SY-SUBRC = 0.
 MESSAGE I003(0) WITH 'ENTER CUSTOMER NUMBER'.
 CALL SCREEN '9000'.
 ENDIF.
PERFORM V_BUDAT.
ENDIF.
ENDFORM.
FORM V_BUDAT.
IF R_BUDAT IS INITIAL
 AND NOT v_BUD_low IS INITIAL
 AND NOT v_BUD_high IS INITIAL.
 r_budat-low = v_bud_low.
 r_budat-high = v_bud_high.
 r_budat-option = 'BT'.
 r_budat-sign = 'I'.
 append r_budat.
 ELSEIF R_BUDAT IS INITIAL
 AND NOT v_BUD_low IS INITIAL
 AND v_BUD_high IS INITIAL.
 r_budat-low = v_bud_low.
 r_budat-high = v_bud_high.
 r_budat-option = 'EQ'.
 r_budat-sign = 'I'.
 append r_budat.
 ELSEIF R_BUDAT IS INITIAL
 AND v_BUD_low IS INITIAL
 AND NOT v_BUD_high IS INITIAL.
 r_budat-HIGH = v_bud_HIGH.
 r_budat-option = 'EQ'.
 r_budat-sign = 'I'.
 append r_budat.
 ELSEIF R_BUDAT IS INITIAL
 AND v_BUD_low IS INITIAL
 AND v_BUD_high IS INITIAL.
 IF SY-SUBRC = 0.
 MESSAGE I002(0) WITH 'ENTER POSTING DATE'.
 CALL SCREEN '9000'.
 r_budat-low = ''.
 r_budat-option = ''.
 r_budat-sign = ''.
 ENDIF.
 ENDIF.
ENDFORM.
*& Form update
 text
--> p1 text
<-- p2 text
form update .
commit work.
endform. " update
*& Form move_data
 text
--> p1 text
<-- p2 text
form move_data .
 clear itab.
refresh itab.
 move-corresponding zcust_call_rec to itab.
 MOVE ZCUST_CALL_REC-MANDT TO ITAB-MANDT.
 MOVE ZCUST_CALL_REC-KUNNR TO ITAB-KUNNR.
 MOVE ZCUST_CALL_REC-BUDAT TO ITAB-BUDAT.
 MOVE ZCUST_CALL_REC-CODE TO ITAB-CODE.
 MOVE ZCUST_CALL_REC-REMARKS TO ITAB-REMARKS.
 APPEND ITAB.
 delete itab where kunnr is initial.
endform. " move_data
thanks in adv
vidya

Execute BAPI for different input values and dispaly data in a table

Hi all,
I have a specific problem about executing BAPI multiple times for different input values and didplay result in a table.
I am using the code similar to the following logic.
Bapi_Mydata_Input in = new Bapi_Mydata_Input();
wdContext.nodeBapi_Mydata_Input().bind(in);
String in = wdContext.currentperdataElement.getnumber();
in.setDestination_From(10)
wdThis.wdGetMydataComponentController().executeBapi_Mydata_Input();
in.setDestination_From(20)
wdThis.wdGetMydataComponentController().executeBapi_Mydata_Input();
in.setDestination_From(30)
wdThis.wdGetMydataComponentController().executeBapi_Mydata_Input();
And I want to display the data in a single table. I want the result in a table for Bapi execution based on input parameters passed 10,20 30.
But I am getting the table data only for the input parameter 30.I mean its actually display the data in table only for the last input parameter.
So May I ask you all if you know the solution for this problem.PLease advise me with some tips .or sample code is very much appreciated.I promise to award points to the right answer/nice advises.
Regards
Maruti
Thank you in advance.

Maruti,
It seems that WDCopyService replaces content of node, rather then adds to content.
Try this:
Bapi_Persdata_Getdetailedlist_Input frelan_in = new Bapi_Persdata_Getdetailedlist_Input();
wdContext.nodeBapi_Persdata_Getdetailedlist_Input().bind(frelan_in);
final Collection personalData = new ArrayList();
String fr1 = wdContext.currentE_Lfa1Element().getZzpernr1();
frelan_in.setEmployeenumber(fr1);
wdThis.wdGetFreLanReEngCompController().executeBapi_Persdata_Getdetailedlist_Input();
WDCopyService.copyElements(wdContext.nodePersonaldata(), wdContext.nodeNewPersonaldata());
for (int i = 0, c = wdContext.nodePersonaldata().size(); i < c; i++)
personalData.add( wdContext.nodePersonaldata().getElementAt(i).model() );
String fr2=wdContext.currentE_Lfa1Element().getZzpernr2();
frelan_in.setEmployeenumber(fr2);
wdThis.wdGetFreLanReEngCompController().executeBapi_Persdata_Getdetailedlist_Input();
WDCopyService.copyElements(wdContext.nodePersonaldata(), wdContext.nodeNewPersonaldata());
for (int i = 0, c = wdContext.nodePersonaldata().size(); i < c; i++)
personalData.add( wdContext.nodePersonaldata().getElementAt(i).model() );
wdContext.nodeNewPersonalData().bind( personalData );
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

How to get all the values in one column of a JTable

How to get all the values in one column of a JTable as a Collection of String.
I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column.

I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column. You could always write a custom TableModel that stores the data in the format you want it. It would probably be about 50 lines of code. Or you could write a loop in 3 lines of code. I'll let you decide which approach you want to take.

How can I get the value of "Warehose" column in a form

How can I get the value of "Warehouse" column in the form below (I mean what table that contain this value):
Production Supervisor >> Batches >> (Button) Material Details >> (Button) Line Allocations
Well, for more clearly! My problem is I must have the Unit Cost of Items, so I've got it in the cm_cmpt_dtl (table), but if I want to, I must create a relation that require 2 filed, they're Item_ID and Whse_Code.
There's no problem with Item_ID, but Whse_Code seem to be the Mission Impossible (hix, I hate that film!!!!)
I wonder if It was right to post this topic here. But anyway I just post my question here, hope I could get some help.

wow, many, many, many.... and many thanks!
Just add a tiny modify to check out the Batch_type
doc_id = (select batch_id from gme_batch_header where batch_no='&batch_number' and batch_type = 0)
Because the batch_no can be duplicated as we also create Batch and Filrm Planned Order.
Many thanks for your support!
P/S: Sorry for my terrible English :P

How to map single input value to Two columns of Database table using format file of Bulk Copy Process

Similar Messages

Maybe you are looking for