How to mark a program as obselete

Hi,
how do u mark a program as obselete, without deleting a program.
Thanks,
Murali

There is no 'Obsolete' functionality as such. Even standard SAP function modules that are Obsolete, you will see only some text in there that says to that effect or some message is issued to point you to the new one. A combination of all the suggestions given here should be used to stop anyone using the program.

Similar Messages

How to mark flag for deletion for bulk of customers.

Hi friends,
GM..
I hv a question , that how to mark flag for deletion for bulk of customers.Few function modules are there (eg. HRCA_CUSTOMER_DELETE ) which are going to 'XD06' transaction to set the flag for individual customers.
But data is huge so it's not possible to go & mark the flag for deletion for individual customers.So what is the solution for this.....
waiting for ur reply....
Thanx.
Regards,
Ajit.

Hi Ajit,
XD99 can be used as a appropriate mass deletion tool for customers .
It is good for max 500 customers to mark for deletion, if you have more than that some times you may get dump.
OR
You can write a program to read an excel file into an internal table and call the function BUP_BUPA_MASS_DELETE to delete the customers.
OR
To mark the BP's for Delete use the following code sample.
It marks the BP's for Delete and once you archive them delete them in bulk.
data : BUPANUM type BU_PARTNER,
RETMSG type ITMSG,
ls_central type BAPIBUS1006_CENTRAL,
ls_Central_X type BAPIBUS1006_CENTRAL_X.
ls_central-CENTRALARCHIVINGFLAG = 'X'.
ls_central-CENTRALBLOCK = 'X' .
move-corresponding ls_Central to ls_Central_X.
CALL FUNCTION 'BAPI_BUPA_CENTRAL_CHANGE'
EXPORTING
BUSINESSPARTNER = BUPANUM
CENTRALDATA = ls_Central
CENTRALDATA_X = ls_Central_X
TABLES
RETURN = RETMSG.
if you give me brief i can help you out more.
Thank you .
Regards
Ram

How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?

How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?
I basically managed to learn how to invert parameters which allows me to be as default in the clean guitar channel and if I switch the first button on the midi foot controller I switch to crunch, but at this point I tryied so hard to programm the second and third button to switch, only through a button in one step, to a third channel for distorsion or a 4th channel for solo guitar but I couldn't figured out how this work can be done!
I would appreciate if anyone could help or share this experience with others who are experiencing the same problem.
Cheers.
F.

I cannot seem to get mainstage to recognize my FCB either. I am using IFCB. Anyone figure this out?
Thanks,
Eric

How to do this program?

Hi all.
I would like some help on how to create a program. Im still very new to the Labview program so any help would be greatful.
Now granted that, heres my issue, ive got an assignment for a class that i have no idea where to start.
Heres the assignment:
You have a discount coupon that gives you a ten cent per gallon discount up to 15 gallons.
You purchase regular gas which is priced at $3.56 a gallon, you give the clerk $30.00 to purchase that much in gas. After applying the discount, how much would you actually have to pay?
For the controls and indicators, i need to show the Amount Tendered, the Discount, Gallons purchased, the Final Price and Discount Amount.
As ive said above, i have no idea where to start with this.
THanks all.

lorddd337 wrote:
Actually i dont have the math worked out as of yet since i have no idea how to do the math that will apply to the program.
Then you need to work out the math first. This has nothing to do with LabVIEW or programming.
For each terminal, decide if it is an input (something the user controls) or an output (something the program will calculate based on the values of the other controls). Have you done that?
lorddd337 wrote:
Also i dont know which tutorial would work for this.
Whatever you just learned in class is probably sufficient. Else start the tutorials in order to learn the basics.
LabVIEW Champion . Do more with less code and in less time .

How to schedule a program in background after 5 or 10 sec

Hi All,
       Can anyone tell me how to schedule a program after 5 or 10 sec in background after the transaction is completed.
It is not a custom transaction. I want to execute a Z program in background in a BADI
Regards
Yathish
Message was edited by:
        Yathish Gundlupet

Programattically?   You can add this code to the end of your transaction(if it is custom, of course).
report zrich_0004 .
data:   sdate type sy-datum,
        stime type sy-uzeit,
        l_valid,
        ls_params like pri_params,
        l_jobcount like tbtcjob-jobcount,
        l_jobname like tbtcjob-jobname.
start-of-selection.
* Get Print Parameters
call function 'GET_PRINT_PARAMETERS'
       exporting
            no_dialog      = 'X'
       importing
            valid          = l_valid
            out_parameters = ls_params.
* Open Job
l_jobname = 'THIS_JOB'.
call function 'JOB_OPEN'
       exporting
            jobname = l_jobname
       importing
            jobcount = l_jobcount.
* Submit report to job
submit <your_program_name
       via job     l_jobname
           number l_jobcount
       to sap-spool without spool dynpro
           spool parameters ls_params
              and return.
* Kick job off 10 seconds from now.
sdate = sy-datum.
stime = sy-uzeit + 10.
* Schedule and close job.
call function 'JOB_CLOSE'
       exporting
            jobcount = l_jobcount
            jobname   = l_jobname
            sdlstrtdt = sdate
            sdlstrttm = stime
Regards,
RIch Heilman

How to run a program as an administrator from within a non-elevated command prompt?

I have a project that is going to be running on a kiosk, and the user that is running the kiosk software is going to be restricted. I have an alternate administrator account, but I cannot seem to figure out how to open my program running as this administrator
user. I have tried to use runas, like so:
runas /user:admin kiosk.exe
However, when I try to run this command, it asks me for the password of the administrator account and my program doesn't open correctly. It fails to open at all. If I change the run as to a start command, then the program executes fine so its
not a problem with my software.
Is there a way to pass a password parameter to runas so that it will not prompt for the password every time? If there is not, can someone think of another way for me to elevate my process to administrator without being logged in as one through the
command prompt?

Hi KevinGEAR,
You want to allow the others without the administrator`s level to run this software and meanwhile the administrator is not logged in, right?
Here is an alternative solution :
1.To work with this solution, a built-in administrator account should be enabled and meanwhile you can create a standard account. The built-in administrator account is different from the administrator account you created.
To enable built-in administrator account:
Ways to Enable / Disable the Built-In Windows 7 Admin Account
http://social.technet.microsoft.com/wiki/contents/articles/3040.enable-disable-the-local-hidden-built-in-administrator-account-in-windows-7.aspx
2. Use the following code
runas /user:ComputerName\Administrator /savecred "Full path to program's exe file"
Here is a link for reference:
Elevated Program Shortcut - Create for Standard User
http://www.sevenforums.com/tutorials/193743-elevated-program-shortcut-create-standard-user.html
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best Regards

How to open labview program with Quit Labview function inside?

Hi Any idea how to open labview program with Quit Labview function inside?
I forgot to add and set the condition of the type for this program.
If the program is an application, it would close straight away.
If it is still labview work, it will go straight to editing program without closing.
So I need to recover, open it and make some changes.
Clement
Solved!
Go to Solution.

Put the VI in a project and open it from there, then it shouldn't autorun. You can use App.kind property of application to decide whether to close or not.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How to call one program from another program

Hai,
How to call one program through another program.
Example.
   I have two programs 1.ZPROG1 2. ZPROG2.
When i execute ZPROG1 at that time it should call ZPROG2.

Hi ,
u can use submit statement to call a program .
DATA: text       TYPE c LENGTH 10,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
regards,
Santosh thorat

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How to write driver programming in smartforms

hi Floks
<i>how to write driver programmig and how many types of driver programs available to trigger smartforms what are they . how to call the url in smartforms ?
help me out .thanking you ,</i>
with regards,
suresh

Hi
Try to get the Function module name from the smart form
how to find Driver program for a smartform
and now goto SE38 and create a progarm for calling the smartform
smartform driver program
Regards
Kathirve

How to find how many times a program has been executed & by whom

Can any one help me to find log of program : Details like how many times the program(T-Code) has been executed and by whom(User ID) and when

Hi,
sy-uname will give u the name of the person.
sy-uzeit will give u the time of exection.
Not sure about number of times of execution.
<REMOVED BY MODERATOR>
regards,
Ramya
Edited by: Alvaro Tejada Galindo on Mar 19, 2008 4:15 PM

How many times a program has been run?

Is there a transaction or table or something that tracks how many times a program has been run? The number of times the program has been run plus using the programs' attributes for last changed would help me a lot. We need this for an archiving study to determine of the client has set up the configuration correctly since they went live and have been executing the correct programs. Thanks and mucho rewards if someone has an answer. FYI - I have done a forum search and could find nothing on this topic. I have looked at the tables TADIR and no help, as well as transaction STAT.

I know ST03N transaction can be used extensively to determine how the programs were executed or even to know who all are using a particular transaction...
I tried to find if we can find the number of executions of a program through this transaction, I could not find myself...
try if you can find it through this tcode.
Phani

Please Help me How write the BDC program for the MIGO inbound Delivery

Please help me how to write bdc program for the MIGO Inbound Delivery in 4.7EE Version. Please help me.
Not in LSMW. Required call transaction or Session Method. Please help me.
Mohan

Run transaction BAPI . Select Logistics Execution/Shipping/InboundDelivery/SaveReplica.. You can use function module BAPI_INB_DELIVERY_SAVEREPLICA in your ABAP program.

How do I share programs between users on my MacBook Pro.

How do I share programs between users on my MacBook Pro. I downloaded mine craft under my user name and I just made my son a new user on the computer but I can't figure out how to put mine craft on his desktop

Try going to system preferences, then go to users and groups- find the option to allow sharing among users
I hope this solved your problem(: btw- I love minecraft!!!

How do I uninstall programs from my MacBook Pro?

I am new to Mac and don't fully understand how to uninstall a program from my Macbook Pro. I've been having some problems with the Sims 3 (Probably some custom content that was bad) and I want to completely uninstall The Sims 3 from my laptop. How do I do this? I have heard that some people say to just delete the folder from my Applications, but being that I come from PC that doesn't seem like it gets rid of everything to me. Anything would be helpful. Thanks.

Sarah
Here are the steps:
Manually Uninstalling The Sims 3 from a Mac
Delete the /Applications/The Sims 3 folder (or any for a Stuff of Expansion pack).
Delete the /Users/"User"/Library/Preferences/The Sims 3 Preferences folder.
Delete the /Users/"User"/Documents/Electronic Arts/The Sims 3 folder.
Note: This file can be saved as a backup to retain save games, simply rename it.

How to mark a program as obselete

Similar Messages

Maybe you are looking for