How to maximize the runtime previewer (of reports)

Question

Hi, I have a report called by a form via Run_Product (REPORTS,...). When the report is called I'd like the previewer to appear in a maximized window. I hav't found where to specify which parameter.
(If you execute the report from the command line, i.e. "R30RUN32 rep_name userid/passw maximize=yes", it works fine!).
Thanks in advance
Ciao Dino.

Answer 1

Groovy:
Welcome to Apple Discussions.
currently have 768MB RAM. To get a bit more performance, I was thinking of swapping the memory for a 1024MB chip, but realise that means throwing away the existing 512.
Since the maximum RAM capacity for your computer is 1.25 GB, which includes the 256 MB module on the logic board, you have 1 user serviceable slot in which you can add 1 - PC2700 DDR333 200-pin SO-DIMM up to 1 GB for a total of 1.25 GB. However, since you already have 768 MB of RAM, although it will make a difference, it will not be very noticeable.
If you have not already installed a larger HDD, adding a 100 GB 7200 rpm HDD will give you a bit more performance both from the added speed and the greater amount of available space, although I would recommend that you go for a 160 GB 5400 rpm HDD, as the performance difference between the 5400 rpm and 7200 rpm is not as noticeable as between the old 4200 rpm and 5400 rpm.
You need good quality RAM for your computer. BGreg listed sources in his post earlier in the thread.
Cheers
cornelius