How to model 2 indices made up of similar parameters to allow drill through?

Hi,
I am creating a dashboard which will show two indices of performance. The first index (call it index A) is made up of parameters 1, 2 and 3. The second index (call it index B) is made up of parameters 2,3 and 4. When the user explores index A I want
to be able to show the performance of each of the sub parameters, similarly with index B.
my fact table has the test results of sampling the parameters at the parameter grain so:
paramter , result
1, 1
2, 0
3, 1
4, 0
in this case my dashboard will show the pass rate of index A as 66.7% and the pass rate of index B as 33.3%. If these are interrogated I should get details below this for each relevant parameter.
I could do this by using a bridge table between my fact and dimension table, bu I think there might be a neater way in SSAS... I'm using sql server 2012 analysis services.
Thanks for any helpful suggestions!

Hi Peego,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

How to pass multiple MDX values for a single parameter into a drill-through report?

I'm thinking this will be an easy question for any experienced SSRS/MDX developers, at least I hope so! I've created a report that gives the user the option to choose viewing data for the current/active week, or YTD. Depending on which link the
user selects, the report simply calls itself and needs to pass in the parameter value for Active week. If it's active week, the parameter value will simply be "true". If it's YTD, the parameter value needs to be both "True" and "False" so the current
week's data is accounted for as well. I've set everything up except for the final step, and I have no idea what to type into the Value field below. I've tried different things: false, as you see below (it errors saying I'm missing the parameter
value), the value in MDX format: =[School Dates].[Active Week].&[True] (it said I was missing a bracket), a 1 instead of the word true (again, missing a parameter value). Nothing is working.
So my question is kindof two-fold: 1) how do you pass in the value at all and 2) more specifically, how do you pass in multiple values (both true & false) ??

I'm sorry for being so dense, but I'm not quite following, although what I've tried makes me think if I can follow you, it will work :)
To answer your initial questions, you are correct with both your assumptions:
1) detailType is the parameter that specificies YTD/Weekly, this is a "report defined" parameter that I am using to determine which Row Group to display (either YTD or Weekly)
2) SchoolDaysActiveWeek is the parameter that is being set to either true or false -- this is a field in the cube that states whether that record is for the current week or not
So in following your instructions, well that's the problem I'm not quite following :)
1) When you say Delete the SchoolDaysActiveWeek parameter from the report only, do you mean to mark the parameter as Hidden? If so, I've done this.
2) I'm not quite sure where to use the statement you provided me. You said to put it in the dataset, but I don't know which dataset. I assume you mean the "main" dataset (as opposed to the hidden dataset that gets generated when you mark a field
as a parameter). If this is the case, the only place I could see that would allow you to use such a statement is in the Filter section of the properties. I tried this, and it did not generate any errors, but it also kept my report groups from displaying
-- it just showed a blank report, so I think it probably wasn't bringing back any rows to populate them with.
I also tried going into the Expression section for the SchoolDaysActiveWeek parameter in the second screenshot and placing the statement there. When I did this and ran the report, I would get the following error:
The 'SchoolDaysActiveWeek' parameter is missing a value
So what am I missing!?
Also, thanks for taking the time to respond!!

Nokia 1661 How should battery strength indicator ...

I tried contacting Nokia via 'Contact' about this via their web site, but the form is faulty, so it is impossible to supply a correct message and hence send a message at all.
I am uncertain regarding how the battery strength indicator should look when charged. This is because, unlike my old phone, a motorola, instead of solid black bars, the bars are of a varying intensity from dark blue to white (from right to left). There are 5 bars. When I charged it the first time the leftmost bar stayed white. This is only my second time of charging. What should it look like when charged? What is the likely charging time from when fully discharged? I have asked Carphone warehouse regarding my first charge and they said it was charged when the leftmost one was white and the others a varying shade of blue from light to dark (left to right). I've now charged it the second time for 8 hours and got the one white and varying shades of blue again. I note it says on the web site that a new NiMH battery full performance is only achieved after two or three complete charge and discharge cycles. Does mean eventually I should get all bars solid blue?
It also says on the web site that ‘When you charge the battery for the first time the battery strength indicator does not scroll the entire time, this is normal. What do they mean ‘scroll the entire time?’ Do they really mean scroll completely to the left so all bars become dark blue?

I received a reply which unfortunately did not help at all. Here is a copy of the email exchange. I have asked for a proper response.
To Nokia
Thank you for your reply. Unfortunately it does not answer the question posed by me and the other customer. I already have a copy of the instruction book.
Please kindly read the question which is about the battery indicator, have a look at the phone, and let me know how the battery indicator works. If you do not know, please find someone at Nokia who does know. Many thanks.
From: @nokia.com
Thank you for contacting Nokia Care.
Please accept my sincerest apologies for the delay in responding to your email. We have been facing technical difficulties with our system and have just managed to retrieve your email.
Please use this web link to assist you:
http://europe.nokia.com/get-support-and-software/product-support/1661-support/guides-1661-support
If you have any enquiries and comments, please feel free to email to us anytime, as we are very delighted in assisting you and your feedback is highly valuable to us!
Keep your phone software up-to-date by using the Nokia Software Updater. For more details visit Nokia Support and Software at http://www.nokia.co.uk/support or http://www.nokia.ie/support. You can also go online to find user guides, troubleshooting support and other services to help you use your Nokia product.
This response has been given based on the information you have provided us. The response is provided for general information purposes only. It is intended, but not promised or guaranteed to be accurate or complete, and it does not constitute any binding commitment.
To ensure proper handling, please continue to use the current subject line.
Please don't hesitate to contact us again if you have any further questions.
Yours sincerely,
Adam
Nokia Service Professional
UK & Ireland Team
Nokia Care
[THREAD ID:1-48VTOIN]
-----Original Message-----
[Country: United Kingdom] [Language: English]
[Permission to Email: ]
[Permission to SMS: ]
[Permission to Letter: ]
[Permission to Phone: ]
[Street address: ]
[ZIP: ] [City: ]
[Nokia Music username: [#music_username#]]
[Phone model: Select]
[Order number: ]
[IMEI: ]
[Contact topic: Nokia Phones or accessories]
[Message: I have today received a new Nokia 1661 phone from Orange.The instruction booklet is inadequate over several issues. I have cut and pasted a query from your Nokia support discussion page. I have exactly the same query. Can you help, please?
"I am uncertain regarding how the battery strength indicator should look when charged. This is because, unlike my old phone, a motorola, instead of solid black bars, the bars are of a varying intensity from dark blue to white (from right to left). There are 5 bars. When I charged it the first time the leftmost bar stayed white. This is only my second time of charging. What should it look like when charged? What is the likely charging time from when fully discharged? I have asked Carphone warehouse regarding my first charge and they said it was charged when the leftmost one was white and the others a varying shade of blue from light to dark (left to right). I've now charged it the second time for 8 hours and got the one white and varying shades of blue again. I note it says on the web site that a new NiMH battery full performance is only achieved after two or three complete charge and discharge cycles. Does mean eventually I should get all bars solid blue?
It also says on the web site that ‘When you charge the battery for the first time the battery strength indicator does not scroll the entire time, this is normal. What do they mean ‘scroll the entire time?’ Do they really mean scroll completely to the left so all bars become dark blue? "]
[Operator: Orange]
[Operating system: Select]

How can I opearate indicator outside while loop?

I do small program, I have many while loops and I want to connect wire (in my application) from each loop to AND gate then to another while loop, but how can I operate these wires to agree with the change of my application inside while loops.
If not clear :
In another words, suppose I want to operate indicator ouside the while loop. How can I operate indicator outside while loop, so when my application become TRUE (inside while loop) the indicator will be ON (outside while loop) and when my application become FALSE(inside while loop) the indicator will be OFF (outside while loop).
Help me if you have any idea please..........................

Hi Rammo,
For the wire to carry the boolean condition from the while loop to an 'and' gate outside, the while loop must stop running
If you want the while loop to keep on running and still pass a boolean value to a destination outside the while loop, use any one of these: property nodes, global or local variables.
i am still not clear as to what you intend to say by this sentence
" I want the wire that comes out from the while loop will become TRUE if it in my application is TRUE inside while loop and the opposite is true. Because I want to connect the wire that comes out from while loop to AND gate than to another application"
plz tell me if the first part of this mail of mine answers your doubt or do you need more information?
regards
Dev

HT4759 How do you get changes made to your documents on a Windows 7 computer show up in your documents on your iPhone?

How can I get changes made in documents on my Windows 7 computer to show up in the documents on my iPhone 5? These documents show up in ICloud without showing the changes.

You have to be accepted into the Apple Beta program before any of that works.

How to see the changes made for iPad in iTunes on my iPad?

How to see the changes made for iPad in iTunes on my iPad? I've been transferring some pdf-files and changed the name on them in iTunes under the index books for my iPad device, but the changes do not show in iBooks-PDF. What to do?

Yes I tried syncing a lot of times, but the changes still wouldn't show, so I did as you said by beginning from the start by adding the PDF's once again.
Thanks for your help, it works now :-)

How to model multiple parent hierarchy in obiee

hi,
I have product hierarchy with multiple parents for a single level. and i want to display all the levels of hierarchy at a same time.
Below mentioned is wht data i am getting from product table in OLTP
current product diamension
root1--level 1
child product1--level 2
child product2--level 3
child product3 ----level 4
and
root2----level 1
child product4----level 2
child product2----level 3
child product3 ----level 4
If u see we have child product2 belongs to two diff hierarchies.
My report req is i want to show all the levels of product in single row.Some thing like
Mb no. level 1 level 2 level 3 level 4
123 root1 CP1 Cp2 CP3
123 root2 CP4 CP2 CP3
How to model this scanario in OBIEE?

H,
Refer this
http://oraclebizint.wordpress.com/2007/11/30/oracle-bi-ee-101332-one-dimension-multiple-hierarchies/
http://www.rittmanmead.com/2010/11/oracle-bi-ee-11g-parent-child-hierarchies-multiple-modeling-methods/
Thanks
Deva

How remove Special stock indicator for dialog in PO componet overview

Hi
I am creating production order with reference to the sales order (MTO) after creating the production order in component overview special stock indicator is default value is u20181u2019, plz any one suggest How remove Special stock indicator for dialog display in production order component over view, I have already maintained in MRP 4 Dependent requirements ind. for individual and coll. Reqmts as u20182u2019
Thanks
Mohan M

Did you maintain the indiv/ coll indicator as 2 after the creation of planned order / production order? If yes, then re-create the order & then check.
If not, then check in BOM Item details if you have maintained them to be as individual.
Check & revert.

How to send html email made in dreamweaver

how to send html email made in dreamweaver

Make sure you upload all of the images used in your email to a server you control. Then, change your image paths to point to those uploaded images with absolute links.
You will get marked as spam if you attempt to send images as attachments to a large list of recipients and most email clients won't download images to begin with, so make sure your html email makes sense with broken pictures.
CSS support is spotty across email clients, if you use css, make sure it's inline, not embedded in the <head> or externally linked in the <head>. Some email clients strip out the <head> section entirely.
Basically, you need to design your html email as if you haven't moved out of the 90's yet, as far as web design is concerned, in order to get maximum cross client compatibility.
Then, when you're ready, I would suggest using a service like www.icontact.com or www.constantcontact.com if your subscriber list is anywhere over 100 or so recipients.

How to make an indicator takes more than one input

Hello,
I want to know how to make an indicator ( like gauge for example) response to more than one case strrcuture result. In other words, how the indicator can take more than one input and move based on different input values ( the arrow of the gauge moves to different angles basesed on the logic structure and not only to one degree).
Thanks in advance,

YES, you got it right Coastal !
This is what i want to do,
I dont know how to establish this output in the software, i am still learning LabVIEW.
I put a merge block to join the outputs but it didnt work.
check it in the attached VI file.
I am sure it is an easy thing but I dont know how to implement it.
Any help you provide is appreciated,
Best wishes

AMFPHP and AS3FLEXDB - how to disable 'busy indicator' during query execution ?

I'm doing some experiments with Flex and SQL with use of as3flexdb and AMFPHP.
I've written some application which is pushing some data to SQL base...
problem is, that durring query execution, there is some 'busy indicator' on the screen
- some circle, and word 'loading'.
Have you any idea how to disable this ?
Everything what I'm doing is based on this tutorial below, but there is no idea in it how to
disable the indicator.
http://ghalex.com/blog/tag/as3flexdb
I'm not sure if this indicator comes from as3flexdb libraries or AMFPHP itself ?
Has anyone of you had such problem before ??
Thanks for all ideas
Rymas,

Unfortunatelly my cheers was to early
I've successfully decompiled the library swc file, found Query.as class and corrected things mentioned in this
post : http://itutorials.ro/viewtopic.php?f=9&t=22&p=59&hilit=loading#p59
... but I cannot compile the library.fla back to swf ... it's generating some errors
Could anyone help me with that, maybe you've got more expirience with decompiling and compiling.
Orginal .swc file is here : http://www.rymasek.iq.pl/swc/as3flexdb_1.3.0.swc
Thanks for help !!

How can I open items made with apple works

How can I open items made with apple works

You need to purchase Pages for your iMac. You can buy it from the App Store.
I don't know if the version of Pages for the iPad will open the Apple Works documents. If you have the documents on your Mac and want to open them on your iPad the easiest way I can think of is to open a DropBox (Google it) account and store the documents there. Then you can try to open the documents in Pages on your iPad. If that doesn't work then I know Pages for OS X will open the Apple Works WP documents.

How describe model data and get select in DB throw topLink.

Hello,
I have table from code
create table t_tree
id int primary key,
parent_id int,
value varchar2(255)
Alter table t_tree
add constraint constr_id_parent foreign key (parent_id) references t_tree (id)
I must get query
select level as lv,lpad('-@-', (level-1)*2)||value as MMM, t.* from t_tree t
connect by prior id=parent_id
start with T.PARENT_ID is null
How describe model data and get select in DB throw topLink.
Dema.

So you'll probably have to write a function which uses dynamic SQL to retrieve the desired message text, like this untested one:
CREATE OR REPLACE FUNCTION get_msg(p_db IN VARCHAR2,
                                   p_id IN NUMBER)
   RETURN VARCHAR2
IS
   msg_txt VARCHAR2(4000);
BEGIN
   -- make sure p_db is a valid database link ...
   EXECUTE IMMEDIATE 'SELECT d_msg FROM msg@' || p_db || ' WHERE t_id = :id' INTO msg_txt USING p_id;
   RETURN msg_txt;
EXCEPTION
   WHEN NO_DATA_FOUND THEN
      RETURN NULL;
END get_msg;
/The you can update likeUPDATE mex
   SET t_msg = get_msg(db_id, t_id);Hth, Urs

HOW DO I MOVE HOME MADE VIDEOS THAT ARE IN MOVIES TO HOME VIDEO...

HOW DO I MOVE HOME MADE VIDEOS THAT ARE IN MOVIES TO HOME VIDEO. THIS PROBLEMS OCCURS IN WIN XP PRO OR MAC 10.6.8 CAN'T COPY AND PASTE, CAN'T IMPORT OR ADD TO LIBRARY; CAUSE IT IS ALREADY IN LIBRARY. I NOTICE THAT THESE SIMILAR ISSUES HAVE BEEN POSTED SINCE DEC 2012 AND NO ONE AND APPLY HAS NOT ADDRESS THESE CONCERNS. ANY IDEAS?!?!

Due to Hotmail Live being POP based there is limitations on it. Not much can be done to get these folders on iPhone till Hotmail Live switches to an IMAP format.
Posted below is the link to the Hotmail blog with what's coming etc. This is ran by Microsoft. So might be your best resource and place to try and reach them to submit feedback.
http://www.windowslive-hotmail.com/comingsoon/en-us/default.htm

How to model a conversion table for unit of measures?

Hi
I am looking for some input on how to model a many-to-many relationship.
The situation:
A fact table with columns:
Product
Unit of Measure
Date
Value
1 product is stored with 1 and only 1 unit of measure - e.g. Product = Oil, unit of measure = m3
The fact contains several products, each having its own unit of measure.
A dimension 'Unit of measures' with columns
Unit Of Measure
Unit Of Measure Name
Measure System
While reporting on the facts it should be possible to chose the unit of measure I want to see my facts in. E.g. I want to be able to show Oil-production in m3 or barrels or liters, etc.
My challenge:
How to model this requirement?
Right now I tend to go for a bridge table between the fact and the dimension.
But I was wondering:
a) are there other ways to model it
b) are there pitfalls in using Bridge tables?
c) Can I re-use the bridge table in combination with other facts as the model grows?
c.2) do I need to create an alias on the bridge table to re-use it?
Thanks for your help
regards
Andy

Hi Kart,
ok let's say my model looks like this (columns below the tables names, sample in brackets) - again ignoring a date dimension:
Dim_Product --- 1:n --- Fact ----- n:1 ----- Dim_UOM
Id (1,2) Prod_id Id (1,2,3)
Name (Oil, Gas) UOM_id Name (m3, Barrel, Litre)
Value
So the products are coming from the Dim_product, Unit_of measures coming from Dim_UOM.
Fact values would look like this
Prod_id UOM_id Value
1 1 10
1 2 84
1 3 10000
etc
If I need to report in a new measure, I would be forced to add a new record to the fact table
Prod_id UOM_id Value
1 1 10
1 2 84
1 3 10000
1 4 150
with 4 being the new measure id.
What I am looking for is a way to be more flexible when it comes to converting values to different measures.
Thanks
Regards
Andy

How to model 2 indices made up of similar parameters to allow drill through?

Similar Messages

Maybe you are looking for