How to modify SO line item VBEP in exit for tcode VA02.

Dear all,
I want to modify the VBEP-MBDAT for a line item in the exit for some condition.
I tried using USEREXIT_SAVE_DOCUMENT and USEREXIT_SAVE_DOCUMENT_PREPARE, but even after changing the VBEP-MBDAT in these two exits, its not getting reflected in the table.
Help me out pls...
regards,
Jinson.

Thankyou Andrea,
I tried putting a break point inside USEREXIT_MOVE_FIELD_TO_VBEP.
But it didnt stop there.
Could you please guide me if I need to activate this exit somewhere.
Thanks,
Jinson

Similar Messages

  • How to add new line item using BAPI BAPI_CONTRACT_CHANGE for contract-ME32K

    HI Experts,
    how to add new line item using BAPI: BAPI_CONTRACT_CHANGE for existing contract.
    Requirement:
    Already the contract having two line items using ME31K.
    Custom program has to add new line items in existing contract.
    Thanks,
    Sendil

    I got the solution:
    We can do like this:
    1. Get all details using details, BAPI_CONTRACT_GETDETAIL.
    2. After getting results, append new line item. Then use your BAPI.
    Check this posting program.. where this bapi is used, use the same coding technique.
    IDOC_INPUT_PURCONTRACT_CHANGE

  • How to get First line item in Table control for BDC.

    Hi,
    I have a requirement while creating the return order from the reference Sales order for BOM.
    Once I compare the line items and delete the items not to be returned, I want to read the first line item which in fact is header, to make some changes.
    How to read  this as cursor points to the last line item.
    -B S B

    Hi Bsb,
    What is exactly unclear to you? =POPO will give a popup screen in which you can enter the order position number. This number will then be on the top of the table which means you can refer to it in BDC with "(01)".
    Regards,
    John.

  • How to block certain line items in vendor invoive for payment

    Hello FI Guru's.
    We have a business requirement where we have to block cetain line items on a vendor invoice and pay the balance. How can we achive that ?
    Cheers!
    Sajal

    Hi
    There are three ways in which you can block an invoice for a payment:
    a) Block at the document level
    b) Block at the Vendor Level or
    c) Block at the Payment Program level.
    Any of the 3 blocks above will block the whole invoice as the block is at the vendor line item.
    I don't think there is an option to partially block the invoice atleast by Automatic Payment Progam.
    You can opt for payment through F-58 & make partial payments.
    Thanks

  • How to split a line item to 2 line item.

    Hi all !
    I have a request, help me please !
    In system I have a invoice with 1 line item value 1000 USD.
    Customer payment 600$. a incoming payment with value 600$ will post to system.
    I want incoming payment and invoice will auto clear 600$ but system can't auto clearing because value is not Identical.
    I want line item of invoice will split to 2 line item. Line item 1 value 600$ and line item 2 value 400$.
    Line item 1 of invoice will auto clear with incoming payment and system will exist a invoice with 1 line item value 400$.
    How to split a line item to 2 line item ? Have FM for split a line item to 2 line item in SAP ?
    If you have other solution for this request, help me please !
    Thanks !

    Hi,
    Have a look at Split line item - Sales Order
    Regards

  • How to delete a line item from the sales order

    Hi all,
    how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
    Regards
    Kumar

    Hi
    U can do this in two ways one u can short close the order by entering Reason for rejection in VA02 at header level and if yr order is multiple line item order u can enter the reason for rejection in any of the line item which u don't want to deliver.
    This is called short close ( as the qty is not delivered fully).
    Thx.

  • How to delete the line item from a sales order

    Hi all,
    how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
    Regards
    Kumar

    Hi Kumar,
    I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
    Regards,
    Rachel

  • How to combine the line items of 2 Sales orders into 1 delivry

    how to combine the line items of 2 Sales orders into 1 delivry
    and their process, pre-requisites and tcode

    The prerequisites are:
    1) In the customer master sales area data, shipping tab, there is a field called Order combination. u must tick that.
    2) for the two orders, the sold to party & ship to party must be same
    3) both orders must have created from same plant & shipping points
    4) the line items must have same loading grp.
    5) the both orders sheduline line date must be same.
    transaction code for the same is VL04.
    enter the required data and select the order nos to be processed.
    Do reward points if it is useful

  • How to clear the line items once posted...

    hello experts,
    i m workiing on Enhancements in fi/co...i m not able to get the actual exit..
    How to clear the line items once postings has been done...i.e. once v do postings in f-48 v assign an assignment with special GL a/c as 'A'(one line item generates)....and in Tr.code f-43 once the due as been settled i.e the payment as been done and same assignment has to be given(2nd line item generates) it has to clear with the transaction f.13.but it is not..there is a report program to check fbl1n(tr.code)...once it is cleared it is shown in cleared items else it is shown in open items.....can any one help me out...
    i m providing the tech names of the fields...
    same program for both the transactions-- sapmf05a screen no for f-48--304 and
    f-43 ---110....
    Assignment --- BSEG-ZUONR....AMOUNT ---(cluster table) BSEG-WRBTR....
    SPECIAL GL A/C RF05A-UMSKZ(structure)
    thanks n regards,
    vamshi

    The prerequisites are:
    1) In the customer master sales area data, shipping tab, there is a field called Order combination. u must tick that.
    2) for the two orders, the sold to party & ship to party must be same
    3) both orders must have created from same plant & shipping points
    4) the line items must have same loading grp.
    5) the both orders sheduline line date must be same.
    transaction code for the same is VL04.
    enter the required data and select the order nos to be processed.
    Do reward points if it is useful

  • How to check plan line items for plan cost at network activity level?

    Dear all,
    How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N.
    I am not able to check using CJI4 or CJI9 report.
    Kindly advise.
    Thanks and regards,
    Jessie

    Hi Jess,
    Have you checked the navigation part which is being displayed on left hand side of report S_ALR_87013565 and S_ALR_87013533.? There you have option to check transaction currency and object currency when you double click on it.
    In case if it is not being displayed under navigation. Then you can bring them on from transaction code CJE2. For eg: Report group for S_ALR_87013533 is 12KST1C. Double click on it and it will open up to do changes in report layout and many more. There you also have options to bring on transaction currency too. Similarly, you can check for other report groups as well just by checking the report description.
    But I am not sure if suits your requirements. Wait for other experts to comment on this.
    Regards,
    Amit

  • How to insert multiple line items in fv60 using bdc.

    Hi all,
          How to insert multiple line items in fv60 using bdcs

    hi
    chk this
    DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
    DATA : IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
    DATA : V_EBELP(30) , V_MENGE(30) , V_WERKS(30), V_EMATN(30) ,
    V_PEINH(30).
    DATA : FILE TYPE STRING, V_MSG(100) , V_IND(2) TYPE N , FLAG VALUE 'X'.
    PARAMETERS: P_FILE(50) TYPE C DEFAULT 'C:\ME21_TEST'.
    DATA : BEGIN OF ITAB OCCURS 0,
            IND(02),
            LIFNR_001(010),
    data element: BSART
            BSART_002(004),
    data element: BEDAT
    data element: EKORG
            EKORG_004(004),
            EKGRP_006(003),
    data element: LPEIN
            LPEIN_005(001),
    data element: EMATNR
            EMATN_01_007(018),
    data element: EWERK
            WERKS_01_008(004),
    data element: EPEIN
            PEINH_01_009(006),
    data element: EWERK
           MENGE_01_013(017),
    data element: AUFEP
            EBELP_014(005),
    data element: AUFEP
         END OF ITAB.
    START-OF-SELECTION.
    FILE = P_FILE.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      = FILE
        FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
      HEADER_LENGTH                 = 0
      READ_BY_LINE                  = 'X'
      DAT_MODE                      = ' '
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
      TABLES
        DATA_TAB                      = ITAB
    EXCEPTIONS
       FILE_OPEN_ERROR               = 1
       FILE_READ_ERROR               = 2
       NO_BATCH                      = 3
       GUI_REFUSE_FILETRANSFER       = 4
       INVALID_TYPE                  = 5
       NO_AUTHORITY                  = 6
       UNKNOWN_ERROR                 = 7
       BAD_DATA_FORMAT               = 8
       HEADER_NOT_ALLOWED            = 9
       SEPARATOR_NOT_ALLOWED         = 10
       HEADER_TOO_LONG               = 11
       UNKNOWN_DP_ERROR              = 12
       ACCESS_DENIED                 = 13
       DP_OUT_OF_MEMORY              = 14
       DISK_FULL                     = 15
       DP_TIMEOUT                    = 16
       OTHERS                        = 17
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    SORT ITAB BY IND.
    START-OF-SELECTION.
    LOOP AT ITAB.
    REFRESH IT_MESSAGES.
    <b>V_IND = V_IND + 1.</b>
    <b>AT NEW IND.</b>
    <b>READ TABLE ITAB INDEX SY-TABIX.</b>
    PERFORM BDC_DYNPRO      USING 'SAPMM06E' '0100'.
    PERFORM BDC_FIELD       USING 'EKKO-LIFNR'
                                  ITAB-LIFNR_001.
    PERFORM BDC_FIELD       USING 'RM06E-BSART'
                                  ITAB-BSART_002.
    *perform bdc_field       using 'RM06E-BEDAT'
                                 ITAB-BEDAT_003.
    PERFORM BDC_FIELD       USING 'EKKO-EKORG'
                                  ITAB-EKORG_004.
    PERFORM BDC_FIELD       USING 'RM06E-LPEIN'
                                  ITAB-LPEIN_005.
    PERFORM BDC_FIELD       USING 'EKKO-EKGRP'
                                  ITAB-EKGRP_006.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    ENDAT.
    <b>PERFORM BDC_DYNPRO      USING 'SAPMM06E' '0120'.
    CONCATENATE 'EKPO-EMATN(' V_IND ')' INTO V_EMATN.
    PERFORM BDC_FIELD       USING  V_EMATN
                                   ITAB-EMATN_01_007.
    CONCATENATE 'EKPO-WERKS(' V_IND ')' INTO V_WERKS.
    PERFORM BDC_FIELD       USING  V_WERKS
                                   ITAB-WERKS_01_008.
    CONCATENATE 'EKPO-PEINH(' V_IND ')' INTO V_PEINH.
    PERFORM BDC_DYNPRO      USING 'SAPMM06E' '0120'.
    PERFORM BDC_FIELD       USING  V_PEINH
                                   ITAB-PEINH_01_009.
    *CONCATENATE 'EKPO-MENGE(' V_IND ')' INTO V_MENGE.
    *perform bdc_dynpro      using 'SAPMM06E' '0120'.
    *perform bdc_field       using  V_MENGE
                                  ITAB-MENGE_01_013.
    *CONCATENATE 'EKPO-EBELP(' V_IND ')' INTO V_EBELP.
    PERFORM BDC_DYNPRO      USING 'SAPMM06E' '0120'.
    PERFORM BDC_FIELD       USING  'RM06E-EBELP'
                                   ITAB-EBELP_014.</b>PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    AT END OF IND.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=BU'.
    ENDAT.
    CALL TRANSACTION 'ME21' USING IT_BDCDATA MODE 'A'
                                             UPDATE 'S'
                                        MESSAGES INTO IT_MESSAGES.
       LOOP AT IT_MESSAGES WHERE MSGTYP = 'E' OR MSGTYP = 'A'.
         IF FLAG = 'X'.
         CALL FUNCTION 'BDC_OPEN_GROUP'
         EXPORTING
            CLIENT                    = SY-MANDT
           DEST                      = FILLER8
            GROUP                     = 'GAMY_FAILURE'
           HOLDDATE                  = FILLER8
            KEEP                      = 'X'
            USER                      = SY-UNAME
           RECORD                    = FILLER1
           PROG                      = SY-CPROG
         IMPORTING
           QID                       =
          EXCEPTIONS
            CLIENT_INVALID            = 1
            DESTINATION_INVALID       = 2
            GROUP_INVALID             = 3
            GROUP_IS_LOCKED           = 4
            HOLDDATE_INVALID          = 5
            INTERNAL_ERROR            = 6
            QUEUE_ERROR               = 7
            RUNNING                   = 8
            SYSTEM_LOCK_ERROR         = 9
            USER_INVALID              = 10
            OTHERS                    = 11
         IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ENDIF.
         CLEAR FLAG.
         ENDIF.
         CALL FUNCTION 'BDC_INSERT'
          EXPORTING
            TCODE                  = 'ME21'
           POST_LOCAL             = NOVBLOCAL
           PRINTING               = NOPRINT
           SIMUBATCH              = ' '
           CTUPARAMS              = ' '
           TABLES
             DYNPROTAB              = IT_BDCDATA
          EXCEPTIONS
            INTERNAL_ERROR         = 1
            NOT_OPEN               = 2
            QUEUE_ERROR            = 3
            TCODE_INVALID          = 4
            PRINTING_INVALID       = 5
            POSTING_INVALID        = 6
            OTHERS                 = 7
         IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ENDIF.
        ENDIF.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID              = IT_MESSAGES-MSGID
        LANG            = 'EN'
        NO              = IT_MESSAGES-MSGNR
        V1              = IT_MESSAGES-MSGV1
        V2              = IT_MESSAGES-MSGV2
        V3              = IT_MESSAGES-MSGV3
        V4              = IT_MESSAGES-MSGV4
      IMPORTING
        MSG             = V_MSG
      EXCEPTIONS
        NOT_FOUND       = 1
        OTHERS          = 2
       WRITE : / V_MSG.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDLOOP.
       ENDLOOP.
    IF FLAG NE 'X'.
      CALL FUNCTION 'BDC_CLOSE_GROUP'
       EXCEPTIONS
         NOT_OPEN          = 1
         QUEUE_ERROR       = 2
         OTHERS            = 3
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      ENDIF.
           Start new screen                                              *
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
      CLEAR IT_BDCDATA.
      IT_BDCDATA-PROGRAM  = PROGRAM.
      IT_BDCDATA-DYNPRO   = DYNPRO.
      IT_BDCDATA-DYNBEGIN = 'X'.
      APPEND IT_BDCDATA.
    ENDFORM.
           Insert field                                                  *
    FORM BDC_FIELD USING FNAM FVAL.
        CLEAR IT_BDCDATA.
        IT_BDCDATA-FNAM = FNAM.
        IT_BDCDATA-FVAL = FVAL.
        APPEND IT_BDCDATA.

  • How to change the line item storage location during the sales order creatio

    How to change the line item storage location during the sales order creatio

    Hi Kumar,
    I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
    Regards,
    Rachel

  • How to increase the line items against the std no of line items in MIGO

    hi,
    I have PO with more than 100 line items
    During GR system is showing the error message as
    Maximum number of items F1 reached
    What is the standard no of line items in MIGO
    And how to increase the line items
    Is there any notes to apply
    plz give sutable solution
    K.Raghuram

    Do you get message F5727 "Maximum number of items in FI reached"? reason is that in FI the posting line has a three-digit line item number (BSEG-BUZEI).
    SAP's note 117708 provides a modification. I am pasting solution below.
    Via the summarization you can post documents with more than 999 items in
    FI.
    The modification required for this is small, in addition you have to
    change 2 tables. The modification is carried out in FI not in invoice
    verification.
    To activate document summarization in FI proceed as follows:
    - The changes are described in Note 36353 and for the
    modification in Note 77161. You may also have to apply Note
    67640 so that the document summarization affects inventory
    management.
    An advice for the notes:
    36353: Solution point 3: Field name WERKS
    77161: Solution point 2: Maintain table TTYPV with Transaction
    SE16
    - this has the following effects; you can no longer clear the
    GR/IR clearing account on purchase order item level (but only
    on purchase order level) and you can only display the FI data
    summarized (also see Note 36353)

  • What is line item datas,how can u check line item in Infocube?

    Hi friends,
    what is line item datas,how can u check line item in Infocube?

    hi konda,
    line item data
    i shall give u an example .
    consider a super market bill,
    the bill has 1.customer name        2. bill number   3. date of purchase
    the above line will be header.
    line item data are the items which u purchase.
    item 1 pencil  2 rubber  3. sharpner  4. cryon  5. sketch pens
    above are line item datas.  for a particular set of header data u may have many line item datas.
    reward points if helpful.
    bye.

  • Is there a user exit to modify PO line item level..

    Dear Friends,
    Is there a user exit to modify PO line item level..
    Ravi

    Hi...I'm not sure on any available customer exits for this purpose. However you can use the check function exit 'EXIT_SAPMM06E_012' of customer exit MM06E005 and using memory pointers you can change the item level data.
    The other option is to use BADI ME_PROCESS_PO_CUST's method PROCESS_ITEM to change the item level value. I would prefer the BADI rather than the customer exit.. Hope it works..
    Thanks,
    Jude

Maybe you are looking for