How to modify strings by deleting non-essential portions?

I am using a Labview driver for a linear stage. To use this stage, I need for it to output the position which I can get. However, it outputs the position in a string like the following:
POSITION=-1.2754
>PRINT "POSITION=" POS
How would I get rid of everything except for -1.2754? Is there some type of deconcatenating feature in Labview?
Thanks!
Solved!
Go to Solution.

Not sure what you mean by a "deconcatenating feature". The Spreadsheet String to Array is the closest I can think of.
I am assuming that's 3 lines that you're getting. The example shown above can be simplified to this:
Message Edited by smercurio_fc on 04-12-2010 04:18 PM
Attachments:
Example_VI.png ‏3 KB

Similar Messages

How do I disable all non-essential components in the CS6 installer

A new question in the spirit of http://forums.adobe.com/thread/548877 and http://forums.adobe.com/message/2778575, where I asked this question for CS4 and CS5 and eventually discovered how to do this (at least for CS4; CS5 was a mess...): How do I disable all the non-essential components in the Photoshop CS6 installer?
I already found the payloads/Media_db.db sqlite 3 database and wiped the DependencyData table. This goes a long way - unlike CS5, which was a maze of hidden xml configs and sqlite databases, for CS6 just wiping this single table will give the user full control over what the installer will put in the computer. With the dependencies wiped, we can now see all the stuff it's actually going to install:
Bridge (normal and x64) - 187 and 262 MB
CMaps (normal and x64) - 7.2 and 7.2 MB
CSXS Extensions - 1.3MB
CSXS Infrastructure - 6.8MB
Color - photoshop, EU, JA, NA - 1.5, 2.1, 3.0, 2.5MB
Video profiles - 4.7KB
Dynamic Link Media Server - 96MB
DynamicLink Support - 6.1MB
ExtendScript Toolkit - 19MB
Extension Manageer - 16MB
Fonts recommended (normal and x64) - 110 and 110MB (why are there x86 and x64 versions? more of an open question than one that really needs an answer, but this is not how fonts work. There are no separate x86 and x64 flavoured OpenType fonts)
Fonts required (normal and x64) - 123 and 123MB
Hunspell Linguistics Plugin (normal and x64) - 181 and 181MB
Linguistics (normal and x64) - 46 and 46MB
Mini Bridge (normal and x64) - 4.0MB
PDF Library Files (normal and x64) - 75 and 75MB
Photoshop (normal and x64) - 486 and 563MB
Photoshop Support - 9.4MB
Player for Embedding 3.3 (normal and x64) - 21 and 26MB
Switchboard 2.0 - 1.1MB
Type Support (normal and x64) - 6 and 6MB
Winsoft Linguistics Plugin (normal and x64) - 8.2 and 8.5MB
XMP Panels - 4.9MB
ColorCommonSetCMYK - 13MB
ColorCommonSetRGB - 8.6KB
Camera Profiles Installer - 285MB
MSVC++2005 redist. (normal and x64) - 11 and 11MB
MSVC++2008 redist. (normal and x64) - 11 and 11MB
MSVC++2010 redist. (normal and x64) - 11 and 11MB
MSVC80_CRT (normal and x64) - 0.0 and 0.0KB
PDF Settings - 2.4MB
Camera Raw 7 (normal and x64) - 22 and 24MB
Suite Shared Configuration - 3.2MB
Some of these things we really want installed (Photoshop, CMaps, XMP panels, Type Support and required fonts and color profiles are pretty much the minimal set required for a functional Photoshop installation), but some of these things really have no right to be silentedly installed. There's a good gigabyte of nonsense that someone who just wants Photoshop has no need for. Denying them the option to unselect these things during installation is a bit evil (whatever happened to the 'advanced' or 'custom' installation option? That was a good option).
That said, there's still something funky going on - unselecting all components indicates that the installation will required 0.0KB on disk. However, selecting Photoshop CS6 x64, which indicates its size is 563MB, results in an installation that requires 677MB on disk. Similar things happen for other components; CMaps is 7.2MB, but when you select it, it suddenly requires 121MB on disk.
Much last last time, I fully appreciate the install team's choices in making sure the installer will always work as long as people don't tamper with it, but I'm not one of those people - I do tamper with it, because I want to control exactly what lands on my disk. So: how do I find out what these secret things are that are not listed after wiping the dependency data so that I can explicitly pick individual components? Which additional steps are required to reveal the hidden dependencies that will apparently still be installed, or aren't factored into the size indication for the various components? And finally, how do I make the installer NOT determine that "this is not a genuine installer, you may have a counterfeit product" =)
I know it's been altered; I modified it, because I think your install process is trying to force stuff onto my computer that I never asked for, nor will ever use (I know they're quality products, they just have no right to exist on my computers. If I had the choice to say no, I'd acknowledge them as quality products instead).
- Mike Kamermans
nihongoresources.com
NB: if Eric Wilde ends up replying to this post: I still remember your willingness to help figure this out for CS5, two years ago. Thank you again for that.

I can see why you wouldn't want to release information that lets people set up arbitrary installers, but that's why I mostly wanted those two specific hashes. The installer team can just generate them without ever saying how, and we will only be able to use them to validate the installer for the modification that lets you pick components. This should in no way interfere with the desire to prevent dangerous installers making it into the wild; in fact, it kind of guarantees that's impossible.
I know you can't guarantee it'll work or test it, and that's fine. Past experience has shown that CS3, CS4 and CS5 work fine with updates (and most updates don't apply to Photoshop, they apply to the additional components that I traditionally don't install), so I'm pretty sure it'll work fine with CS6 too, although of course it could go wrong in which case I can always fall back to a normal install.
Would you be willing to ask the install team whether they could generate just these two numbers, based on the single SQL command run on Media_db.db from the main payload directory? I can fully understand not wanting to give the "here is how you generate the hashes" information, but generating two specific numbers that don't work for anything but this specific query should be just as safe as the various hashes we can already see for the other Media_db.db files in the various payload directories (so they wouldn't reveal anything not already known about how to reverse engineer the hashing algorithm). It'd help tech-savvy customers quite a bit without playing into the hands of criminally minded jerks (I actually had the pleasure of running into a duped CS3 Extended disc several years ago! I had ordered CS3 for personal use, and mysteriously received a CS3 extended version with a volume licensing key in what looked like an official normal CS3 box. Needless to say, authorities and Adobe were notified).
<<I think the right answer to this issue is to simply remove from the products those items that are not required to execute the product. That's actually something we're aggressively pursuing this summer so that the product size reduces in future releases, particularly for PS.>>
It's not possible to take components out of the payloads directory without the installer complaining that errors have occurred. It really wants all those files there when it starts =(
<<Have you investigated using AAMEE? I don't think that will get rid of all the "extraneous" pieces; but, it does provide some flexibility in creating an install package that can then be pushed out through normal deployment tools (e.g. SCCM).>>
I did, but unfortunately AAMEE requires the use of a volume license key, which I don't have. We only have individual products keys for the machines that will get Photoshop CS6.
- Mike

Once PO is released against a PR, how can the PR be deleted or modified by

Once PO is released against a PR, how can the PR be deleted or modified by the Requisitioner. Any / deletion of a PR,
Note: Our Req No one Can PR delete if it have converted in po,

hI,
Note 521174 - ME52N: Deletion of a PReq despite PO
Check this note is applicable or not at your end
Summary
Reason and Prerequisites
You create a purchase requisition and a purchase order is generated from it. Afterwards, you change the purchase requisition by setting the deletion indicator. The system generates a warning message that a purchase order already exists for this purchase requisition. However, the deletion of such a purchase requisition should be prevented. Therefore, the system should generate the error message 06152.
Other terms
ME52, 06152.
Reason and Prerequisites
The warning message does not suffice.
Solution
After you implemented the correction, you can set set the message via Customizing. If you customize the message as an error message, a deletion is no longer possible. However, the message is not output as an error message in order to block a further processing of the purchase order. This only appears as an information message.
Regards
Kailas Ugale

Keyboard non-functioning - may have deleted something essential!

Help! My keyboard has stopped working. Inexplicably, the mouse is fine, but nothing comes up when I type. I suspect that I may have deleted something essential.
I was ruthlessly deleting things off my hard drive in an attempt to make iMovie and iDVD work properly - getting rid of unused printer drivers, etc. - and I'm afraid I might have deleted something I shouldn't have. Everything worked fine until I tried to type a title into iDVD, at which point the program promptly shut down. I double-clicked the Keyboard and Mouse control panel, and the system folder promptly closed (I could open the other control panels without issue). I tried to do a restart in safe mode, and the shift key seemed to work to get that going, but I couldn't type in my password in the log-in screen!
I assume I will have to reinstall system software (which will do away with all that nice free space I created), but how do I do that when the CD-eject button is on the keyboard and I can't type my password?
I will appreciate any help!!
eMac Mac OS X (10.4.1) 7.01 gig free hard disk space

hi there-
if the shift key seemed to work to get into safe mode, but wouldn't work once logged in, the keyboard should work to boot to the install disk. simply put in the install disk number one (make sure it is for the current operating system) and hold down the c during startup. do disk repair beforehand, and make sure it fixes all errors, before attempting to reinstall. http://docs.info.apple.com/article.html?artnum=106214 once you proceed in the installer, make sure you select the macintosh hd as the destination, then choose archive and install, preserving users and network settings. complete instructions are in this article. http://docs.info.apple.com/article.html?artnum=107120 good luck to you.

How to modify the field lengh of file upload

Hi All,
   I am facing a problem with u201Cuploadu201D filed length in BSP application.
When we upload the file in BSP page, the path displayed should be the full path (i.e. from where the file is being upload the file)
Now this field is appearing 20 char length
Now I want to increase the length of the upload field (Input field) to be 100 char so that the path is visible.
In the current application the file upload is being done through a structure (attributes)
In this structure the fields are like this
PAGE_NAME
ID
FOR
TAGS
ROW_INDEX
COLUMN_INDEX
OTR_NAME
REQUIRED_NAME
MAXLENGTH
SIZE
TABLE_NAME
ON_SELECT
VALUE
DISABLED
ONCLICK
TEXT
TYPE
Using this method:
CALL METHOD cl_htmlb_fileupload=>factory
          EXPORTING
            Id      = ls_form_save-id
          RECEIVING
            Element = lv_fileup.
        bee_table->add ( level = 2 element = lv_fileup ).
This cl_htmlb_fileupload is named as class interface.
Which has the CLG_HTMLB_FILEUPLOAD (it is a class) it is defined in attributes.
In this class it has the attribute u201CSIZEu201D by default string 20.
Now I need to change this attribute length from 20 to 100
For this I copied the standard class CL_HTMLB_FILEUPLOAD into ZCL_HTMLB_FILEUPLOAD.
This ZCL_HTMLB_FILEUPLOAD contains all attributes of the standard class CL_HTMLB_FILEUPLOAD
Including the one class (CLG_HTMLB_FILEUPLOAD), this is defined as an attribute (ABOVE MENTIONED?)
This class is appearing in non editable mode, so   I have copied this class into zclass (ZCLG_HTMLB_FILEUPLOAD).but still I am not able to edit the attribute called u201Csizeu201D
And also I am not bale to add the zclass in place of the ZCLG_HTMLB_FILEUPLOAD
Kindly tell me how to modify the length of the field u201Csize u201Cand also how to add the zclass in the attributes of one class (syntax)
Thanks in advance
Rambabu.A

Hi,
Class CLG_HTMLB_FILEUPLOAD is a class automatically generated when a BSP Element is created. You should not change/create such a class, unless by creating your own BSP Element.
As per your requirement, you can use the SIZE parameter of method factory:
ls_form_save-size = '100'.
CALL METHOD cl_htmlb_fileupload=>factory
EXPORTING
Id = ls_form_save-id
Size = ls_form_save-size
RECEIVING
Element = lv_fileup.
Regards,
Tanguy

How to modify the database by Oracle-ridc-client

How to modify the database by Oracle-ridc-client

First of all, from your question it is not very clear what kind of modifications you intend to do - one correct answer to your question could be "call any non-read-only service", which will result as insert/update/delete to a table somewhere. My guess is that this is not the answer you are looking for.
While working with RIDC (or CIS to answer your other thread at once) you have to understand that you integrate primarily with the application layer of your solution. If you want to modify the database scheme, you might, for instance, add a new metadata field - this is OK, because there is a service that you may call to achieve that. On the other hand you might want to change the db scheme directly (e.g. add a new column to a standard table); here neither RIDC, not CIS will help you unless you create a custom (server-side) service that you will call. Note, however, that you should be doing this only if you are really sure what you are doing.

How can I remove or delete my posts and resign my membership with Adobe?

How can I remove or delete my posts and resign my membership with Adobe?

At the bottom see terms of use you own your content and can ask for its removal but it may remain in the sites backup. The problem is your responsible to remove it and the way the site code works once an append is made to your's. Your content becomes locked and you can no longer delete it. IMO part (c) is broken....
3. Your Content.
3.1 Ownership. You retain all rights and ownership of your content. We do not claim any ownership rights to your content.
3.2 Licenses to Your Content in Order to Operate the Services. We require certain licenses from you to your content to operate and enable the Services. When you upload content to the Services, you grant us a non-exclusive, worldwide, royalty-free, sub-licensable, and transferrable license to use, reproduce, publicly display, distribute, modify (so as to better showcase your content, for example), publicly perform, and translate the content as needed in response to user driven actions (such as when you choose to store privately or share your content with others). This license is only for the purpose of operating and improving the Services.
3.3 Our Access. We will not access, view, or listen to any of your content, except as reasonably necessary to perform the Services. Actions reasonably necessary to perform the Services may include (but are not limited to) (a) responding to support requests; (b) detecting, preventing, or otherwise addressing fraud, security, unlawful, or technical issues; and (c) enforcing these terms.
3.4 Sharing Your Content.
(a) Sharing. Some Services may provide features that allow you to Share your content with other users or to make it public. “Share” means to email, post, transmit, upload, or otherwise make available (whether to us or other users) through your use of the Services. Other users may use, copy, modify, or re-share your content in many ways. Please consider carefully what you choose to Share or make public as you are entirely responsible for the content that you Share.
(b) Level of Access. We do not monitor or control what others do with your content. You are responsible for determining the limitations that are placed on your content and for applying the appropriate level of access to your content. If you do not choose the access level to apply to your content, the system may default to its most permissive setting. It’s your responsibility to let other users know how your content may be shared and adjust the setting related to accessing or sharing of your content.
(c) Comments. The Services may allow you to comment on content. Comments are not anonymous, and may be viewed by other users. Your comments may be deleted by you, other users, or us.
3.5 Termination of License. You may revoke this license to your content and terminate our rights at any time by removing your content from the Service. However, some copies of your content may be retained as part of our routine backups.
3.6 Feedback. You have no obligation to provide us with ideas, suggestions, or proposals (“Feedback”). However, if you submit Feedback to us, then you grant us a non-exclusive, worldwide, royalty-free license that is sub-licensable and transferrable, to use, reproduce, publicly display, distribute, modify, and publicly perform the Feedback.
3.7 Account Information.
You are responsible for all activity that occurs via your account. Please notify Customer Support immediately if you become aware of any unauthorized use of your account. You may not (a) Share your account information (except with an authorized account administrator) or (b) use another person’s account. Your account administrator may use your account information to manage your use and access to the Services.

How to modify a pdf?

how to modify a existing pdf document?

Hi kewme5798,
You can edit a PDF file if you have the Adobe Acrobat software
1. Open Adobe Acrobat. From the File menu select "Open." Browse to the document you wish to edit and double-click the file to open it.
2. Add or remove pages by selecting the "Tools" menu on the right-hand side of the page. Select the "Pages" option. Choose the appropriate action: "Insert from file," "Delete," "Extract" or "Replace," to name a few options. For example, to add pages from another PDF file, click the "Insert from file" option and select the file you wish to insert. Follow the prompts to tell Acrobat where to insert the additional pages (before or after the existing pages) and click "OK." Delete pages by the clicking the "Delete" option and highlighting the pages you wanted deleted from the PDF file.
3. Edit the text within the pages by selecting "Tools," "Content," "Edit Document Text." Highlight the text you need to edit and type in the new text.
4. Click on "Tools," "Content" and "Edit Object" to move objects around on the page, resize them, flip or rotate them. You can also edit the size and orientation of images and text boxes using this option.
5. Complete the necessary editing, proofread your changes and click "Save As" from the File menu. Name your document something to indicate that it is a revised version of the original document and click the "Save" button.

How do I get my old (non-iOS) number off of imessage?!

I recently sold my iPhone 3GS and ported the number out to Google Voice. This old number is now forwarded to a new number on an employer provided 4S. I figured I could save some money, avoid the hassle of carrying two phones, and, at the same time, keep my personal number. I read about all of the problems that would happen if I did not turn off imessage before porting a number away from iOS and was determined to not let it happen to me. Well...it happened anyway.
Before doing anything, I SHUT OFF iMESSAGE. I then ported the number out and cancelled my account, removed the SIM (AT&T), did a complete wipe/restore of the iphone, unregistered the iphone from my support profile, and sold the phone. From what I can tell from all of the support forum posts, I did everything I was supposed to do to ensure I would have no issues with imessage. I was so sure of myself, I didn't even bother to test it. I wish I had.
Despite my efforts, I am still not receiving text messages from iOS imessage users because messages from them to me still default to imessage instead of SMS. It doesn't seem to matter if they have the "Send as SMS" option toggled on or off...I will not get the message regardless. I've had people delete entire message strings and delete/replace my contact info in an effort to fix. No luck. I even had a stranger at work who did not have my contact info test it out for me. When he tried to text me, it defaulted to imessage. I must point out that I have ZERO issues receiving SMS messages.
How can this be? And how do I go about correcting the issue? I've already spent about an hour on the phone with Apple and about an hour at the genius bar (where the issue was successfully demonstrated first hand when a "genius" tried to text me from his phone). They claim that they had no prior knowledge of any issues with imessage and suggested that I tell all of my contacts with iphones to simply "just remember" to send me SMS only. Seriously? This is an unreasonable request...and certainly not a fix. After arguing for a while, they took my contact info and "escalated the issue to engineering." It's now been three weeks and I've heard nothing.
Any suggestions? I'm guessing that someone, somewhere at Apple can somehow remove the association between imessage and my old number from the server...somehow. Any help would be appreciated, especially any help regarding how to successfully escalate issues within Apple support.

If you registered your 3GS with Apple, another step you can take that may help is to unregister it by doing the following:
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on ">" to the right of the phone listing
Click "unregister"
Sometime this helps unregister a phone number with the iMessage server.

How do I stream music from non-iTunes apps to Airport (mac air core-i7 OS 10.7.5 airport firmware 7.6.1 --- option-clicking speaker icon only shows internal speakers - audio streaming works from iTunes just fine.

How do I stream music from non-iTunes apps to Airport (mac air core-i7 OS 10.7.5 airport firmware 7.6.1 --- option-clicking speaker icon only shows internal speakers - audio streaming works from iTunes just fine.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

How to modify the text in login page?

In login page , there are some lines text:
This network is to be used only for legitimate business purposes. If you are not authorized to have access, do not enter this network. By entering the network, you agree to maintain its confidentiality and not to disclose or misuse the information contained in the network and you further agree to our monitoring of your use of this network.
How to modify or delete these words ?
Thanks

This text is not a translation managed in the DB. you can modify the aspx page, directly. web\webcommon\login.aspx

Error 500--Internal Server Error:How to modify req.setReportAbsolutePath

I test a servlet but I get following errors. I use OBIEE 11g and Jdeveloper 11.1.1.3
How to modify the source code and the req.setReportAbsolutePath?
===============error====================
http://127.0.0.1:7101/Application4-Project4-context-root/bipservlettest
Error 500--Internal Server Error
java.lang.NullPointerException
     at java.io.OutputStream.write(OutputStream.java:58)
     at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
========source code============
package mywebcenter;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.*;
import javax.servlet.http.*;
import com.oracle.xmlns.oxp.service.publicreportservice.AccessDeniedException;
import com.oracle.xmlns.oxp.service.publicreportservice.AccessDeniedException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.DeliveryRequest;
import com.oracle.xmlns.oxp.service.publicreportservice.InvalidParametersException;
import com.oracle.xmlns.oxp.service.publicreportservice.InvalidParametersException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.LocalDeliveryOption;
import com.oracle.xmlns.oxp.service.publicreportservice.OperationFailedException;
import com.oracle.xmlns.oxp.service.publicreportservice.OperationFailedException_Exception;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportService;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportServiceClient;
import com.oracle.xmlns.oxp.service.publicreportservice.PublicReportServiceService;
import com.oracle.xmlns.oxp.service.publicreportservice.ReportRequest;
import com.oracle.xmlns.oxp.service.publicreportservice.ReportResponse;
import com.oracle.xmlns.oxp.service.publicreportservice.ScheduleRequest;
import java.io.IOException;
import java.io.OutputStream;
import java.io.PrintWriter;
import java.net.URL;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.xml.namespace.QName;
public class BipServletTest extends HttpServlet {
private static final String CONTENT_TYPE =
"text/html; charset=windows-1252";
private static PublicReportServiceService publicReportServiceService;
public void init(ServletConfig config) throws ServletException {
super.init(config);
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws ServletException,
IOException {
response.setContentType(CONTENT_TYPE);
OutputStream os = response.getOutputStream();
//PrintWriter out = response.getWriter();
String sid = "";
System.out.println("===57===");
publicReportServiceService = new PublicReportServiceService(new URL("http://localhost:9704/xmlpserver/services/PublicReportService"),
new QName("http://xmlns.oracle.com/oxp/service/PublicReportService",
"PublicReportServiceService"));
PublicReportService publicReportService =
publicReportServiceService.getPublicReportService();
//To get a session id
System.out.println("===64===");
try {
sid = this.getSessionID("weblogic", "welcome1", publicReportService);
} catch (AccessDeniedException_Exception e) {
System.out.println("invalid user");
//To generate a report and display it
System.out.println("===72===");
ReportResponse res = this.getReportInSession(publicReportService, sid);
byte[] binaryBytes = res.getReportBytes();
os.write(binaryBytes);
response.setContentType(res.getReportContentType());
public String getSessionID(String username, String password, PublicReportService publicReportService) throws AccessDeniedException_Exception {
String sid = publicReportService.login(username, password);
return sid;
public ReportResponse getReportInSession(PublicReportService publicReportService,
String sid) {
ReportRequest req = new ReportRequest();
ReportResponse res = new ReportResponse();
System.out.println("===89===");
req.setAttributeFormat("pdf");
req.setAttributeLocale("en-US");
req.setAttributeTemplate("Simple");
req.setReportAbsolutePath("E:\\OracleBI_win2008_32_20101206\\user_projects\\domains\\bifoundation_domain\\config\\bipublisher\\repository\\Reports\\Samples\\11g Overview\\W2 2010.xdo");
//req. setSizeOfDataChunkDownload (-1); //download all
try {
System.out.println("99");
res = publicReportService.runReportInSession(req, sid);
System.out.println("101");
System.out.println("===100==="+res.getReportContentType());
} catch (Exception e) {
System.out.println(e);
System.out.println("===107===");
return res;
============Jdeveloper console==================
[Another instance of the application is running on the server. JDeveloper redeploy the application.]
[Application Application4 stopped but not undeployed from Server Instance IntegratedWebLogicServer]
[Running application Application4 on Server Instance IntegratedWebLogicServer...]
[12:45:14 PM] ---- Deployment started. ----
[12:45:14 PM] Target platform is (Weblogic 10.3).
[12:45:14 PM] Retrieving existing application information
[12:45:14 PM] Running dependency analysis...
[12:45:14 PM] Deploying 2 profiles...
[12:45:15 PM] Wrote Web Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\Application4\Project4WebApp.war
[12:45:15 PM] WARNING: Connection ApplicationDB has no password. ApplicationDB-jdbc.xml file not generated for connection ApplicationDB.
[12:45:15 PM] Wrote Enterprise Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\Application4
[12:45:15 PM] Redeploying Application...
[12:45:17 PM] Application Redeployed Successfully.
[12:45:17 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[12:45:17 PM] http://192.168.1.17:7101/Application4-Project4-context-root
[12:45:17 PM] Elapsed time for deployment: 4 seconds
[12:45:17 PM] ---- Deployment finished. ----
Run startup time: 3547 ms.
[Application Application4 deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/Application4-Project4-context-root/bipservlettest
===57===
===64===
===72===
===89===
99
javax.xml.ws.soap.SOAPFaultException: oracle.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport failed: due to oracle.xdo.servlet.CreateException: Report definition not found:E:\OracleBI_win2008_32_20101206\user_projects\domains\bifoundation_domain\config\bipublisher\repository\Reports\Samples\11g Overview\W2 2010.xdo
===107===
<Dec 8, 2010 12:45:24 PM PST> <Error> <HTTP> <BEA-101020> <[ServletContext@26496369[app:Application4 module:Application4-Project4-context-root path:/Application4-Project4-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.NullPointerException
     at java.io.OutputStream.write(OutputStream.java:58)
     at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 12:45:24 PM PST> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'DefaultServer' has triggered at Dec 8, 2010 12:45:24 PM PST. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Dec 8, 2010 12:45:24 PM PST SERVER = DefaultServer MESSAGE = [ServletContext@26496369[app:Application4 module:Application4-Project4-context-root path:/Application4-Project4-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.NullPointerException
     at java.io.OutputStream.write(OutputStream.java:58)
     at mywebcenter.BipServletTest.doGet(BipServletTest.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = WIN-IT8WDLG81KH TXID = CONTEXTID = 55211ca27b9d1dfd:bd42a62:12cc7606a10:-8000-000000000000009c TIMESTAMP = 1291841124147
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<Dec 8, 2010 12:45:34 PM PST> <Alert> <Diagnostics> <BEA-320016> <Creating diagnostic image in c:\users\administrator\appdata\roaming\jdeveloper\system11.1.1.3.37.56.60\defaultdomain\servers\defaultserver\adr\diag\ofm\defaultdomain\defaultserver\incident\incdir_12 with a lockout minute period of 1.>

am able to login
http://192.168.75.140:7001/console/login/LoginForm.jsp
from this environment-> servers-> all servers(adminserver,soa_server1, oim_server1, oam_server1) status is running,and health is ok.
I have started these servers from command line <base_domain/bin/sh startManagedWebLogic.sh oim_server1
result is <server started in running mode>
now I shutdown the oam_server1 and oim_server1
again I started the oim_server1 as above
command line result is < <May 30, 2013 7:54:47 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
but in (http://localhost:7001/console) window oim_server1 status is unknown...

How can I select and delete rows based on the value in one column?

I searched through the discussion board, and found a thread on deleting blank rows, but not sure how to modify it to work with my issue.
I have put together a rather complicated spreadsheet for designing control systems, it calculates parts needed based on check boxes selected in a second spreadsheet.
Since not all systems require all parts there are many rows that have a 0 quantity value, I would like to select these rows and delete them once I have gone through the design phase (checking off required features on a separate sheet).
I like the way the other thread I found will gather all the blank rows at the bottom without changing the order of the rows with data in them.
I don't understand exactly how the formula in the other thread works well enough to modify it to look for a certain column.
I hope I made myself clear enough here, to recap, I would like to sort the rows based on a zero value in one (quantity) column, move them (the zero quantity rows) to the bottom of the sheet, and then delete the rows with a zero quantity (I can delete them manually, but would like to automate the sorting part).
Thanks for any help anyone can provide here.
Danny

I apologize but, as far as I know, Numbers wasn't designed by Ian Flemming.
There is no "this column will be auto-destructing after two minutes"
You will have to use your fingers to delete it.
I wish to add a last comment :
if your boss has the bad habit to look over your shoulder, it's time to find an other one.
As I am really pig headed, it's what I did. I became my own boss so nobody looked over my shoulder.
Yvan KOENIG (VALLAURIS, France) mercredi 13 juillet 2011 20:30:25
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to modify a pod in dashboard component?

Hi
I am new to flex and programming in general. So please do forgive me if I do not express my query clearly or with the right info.
I am trying to build an application to show case photographs and one of the components I am using is the Dashboard built by WASI and can be seen here. It has several pods but I would like to have one of the pods load up with my own default position, width and height yet still retain the characteristics of minimizing, maximizing & drag and drop. Other than through the pods.xml file, I do not know how to modify (or which other file I should modify for that matter) so that when the application loads, it always starts with the particular pod at my desired height (top to bottom), width (about 1/4 of screen real estate) and position (left side of the screen)
Below is the pods.xml file and attached is the project zip file.
<?xml version="1.0" encoding="utf-8"?>

<views>
    
    <view
        id="view0"
        label="Sales">
        <pod
            id="pod00"
            type="chart"
            title="Yearly Revenue"
            dataSource="data/revenue.xml"
            selectedViewIndex="1"
            valueField="value"
            categoryField="month"
            dataTipUnitLabel="$*M"
            dataTipLabelField="month"/>
        <pod
            id="pod06"
            type="pieChart"
            title="Revenue by Region"
            dataSource="data/revenue_by_region.xml"
            valueField="value"
            categoryField="region"
            dataTipUnitLabel="$*M"
            dataTipLabelField="region"/>
        <pod
            id="pod01"
            type="chart"
            title="Yearly Profit"
            dataSource="data/profit.xml"
            valueField="value"
            categoryField="month"
            dataTipUnitLabel="$*M"
            dataTipLabelField="month"/>
        <pod
            id="pod02"
            type="form"
            title="To Do"
            dataSource="data/tasks.xml"
            labels="Name,Date,Description"
            dataFields="name,date,description" />
        <pod
            id="pod03"
            type="list"
            title="Company News"
            dataSource="data/news.xml" />
        <pod
            id="pod04"
            type="form"
            title="Sales Pipeline"
            dataSource="data/pipeline.xml"
            selectedViewIndex="1"
            labels="Name,Date,Description"
            dataFields="name,date,description" />
        <pod
            id="pod05"
            type="chart"
            title="Projected Revenue"
            dataSource="data/projected_revenue.xml"
            valueField="value"
            categoryField="month"
            dataTipUnitLabel="$*M"
            dataTipLabelField="month"/>
    </view>
Thank you very much for any help you may provide.
Best regards
Vanery

hi,
u may upload a file from the desktop in ur webdynpro .. thn u can save it in database and can download accordingly..
1.create a node 'FILEUPLOAD' with 2 attributes
a) FILECONTENT type XSTRING
b) FILENAME type STRING
2. Create a fileuplaod uielement
a) bind the data property with attribute 'FILECONTENT'
b) bind the filename property with attribute 'FILENAME'
3. Create a button 'UPLOAD'
a) create the action method for this button and save the contents of file in database
Data l_node type ref to if_wd_context_node.
Data l_stru type wd_this->elements_cn_fileupload.
l_node = wd_context->get_child_node( 'FILEUPLOAD' ).
l_node->get_static_attributes( importing static_attributes = l_stru ).
"save l_stru-fielcontent in database. Your file will be saved in the database in XSTRING format.
Now when you want to display this file;
1. Create a Node 'FILEDOWNLOAD' with 1 attribute
a) FILE type XSTRING
2. Create a filedownload uielement
a) bind the data property with the attribute 'FILE'
Fetch the file from database and set the File attribute of the filedownload uielemnt to display the file.
regards,
Amit

In List, How to modify the Link in Quick Edit Mode?

In List, How to modify the Edit in Quic Mode Link? Instead of opening Quick view mode, to open in InfoPath customized form?

Hi Eugene,
According to your description, my understanding is that you want to midify the link of "Edit" and set it linking to a InfoPath Form which can bulk edit your List.
You can use the code above to modify the Edit's hyperlink and set it linking to your InfoPath form.
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function () {
$("#idHomePageNewItem").next("a").attr("href","the URL of your InfoPath form");
$("#idHomePageNewItem").next("a").removeAttr("onclick");
</script>
For more information about bulk updating a SharePoint list using InfoPath form, you can have a look at the blog:
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/c05983fc-d992-49ff-8d18-fa8f70777d66/using-infopath-2010-to-bulk-update-a-sharepoint-list?forum=sharepointcustomizationprevious
http://infopath.wordpress.com/2013/09/23/infopath-repeating-table-add-edit-delete-sharepoint-list-items-bulk/
http://sharepointknowledgebase.blogspot.com/2011/10/updating-sharepoint-list-by-using.html#.VGFsKHkcSM8
If any misunstanding, please feel free reminding me and provide more detail for your issue.
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to modify strings by deleting non-essential portions?

Similar Messages

Maybe you are looking for