How to modify the text in login page?

In login page , there are some lines text:
This network is to be used only for legitimate business purposes. If you are not authorized to have access, do not enter this network. By entering the network, you agree to maintain its confidentiality and not to disclose or misuse the information contained in the network and you further agree to our monitoring of your use of this network.
How to modify or delete these words ?
Thanks

This text is not a translation managed in the DB. you can modify the aspx page, directly. web\webcommon\login.aspx

Similar Messages

How can Modify the Text of a MessageArea in a Application WD ABAP Standard?

Dear Experts.
How can Modify the Text of a MessageArea in a Application WD ABAP Standard?
I found the following link in the helpsap, but in this moment I don't know How found this text? and Modify this text with a new text.
http://help.sap.com/saphelp_nw70/helpdata/en/3a/f6ba42a950da11e10000000a155106/frameset.htm
The text of a MessageArea are in a table of configuration or can do the system for get this text and show in the application in the portal? How can get this and modify by a new text.
Please help me with a suggestions.
Thanks
Regards
Carmen G.

Dear Kranthi..
The datas of the Application is the following:
General Information About the Application and Component
Application: FITE_REQUEST
Web Dynpro Component: FITV_FPM
Window Information: FPM_WINDOW
View Information: Layout_view
Information on Field
Field ID: HELPTEXT
Type of UI Element : Explanation
Attributes of UI Element
TEXT_DOCUMENT_NAME: FITE_FPM_REQUEST_GENERAL_DA
I dont found this method L_MESSAGE_MANAGER->REPORT_T100_MESSAGE.
Please can give more suggestions for found the method
Thanks in advance
Regards
Carmen G.

How to modify the names of existing Pages styles?

In Pages 5.5.2 under Yosemite 10.10.2.
1. How to modify the name of an existing style in both the Main styles list, and also in the Bullets & Lists styles list?
2. How to delete unwanted styles from both styles lists?
3. How to modify the default formulas for Bullets & Lists styles and make them stick for future documents?
Appreciated.

Click on it and you get the Formatting options for the selected text.
If I had meant the Menus, I would have added that, but all the above is what you see when you have a document open in Pages 5.5.2.
The > are clearly progressive steps. Except for the ">" which appears in the pop up menu, so I put it in quotes.
I always assume that people on the forum will make some effort themselves, but can bring it down a notch if needed.
Peter

How to modify the text in java3d??

I want to modify the text in java3d.What should I do ??
first , I add the text to the java3d;
then , I pick it by using behaior;
third, I setString("My dog") to change text!!
but there have some capability error!
how can I do that??
thanks in advance!!

Hi,
I've a similar problem - I'm using Text2D to create labels for a node-link graph. I've set all the capabilities, etc., and am finally able to change the labels using setString in Text2D. With one slight problem - now I'm getting an error:
java.lang.IllegalArgumentException: Texture:illegal image size
        at javax.media.j3d.TextureRetained.checkImageSize(TextureRetained.java:389)
        at javax.media.j3d.TextureRetained.setImage(TextureRetained.java:423)
        at javax.media.j3d.Texture.setImage(Texture.java:869)
        at com.sun.j3d.utils.geometry.Text2D.setString(Text2D.java:118)
        at Label3D.setLabelText(Label3D.java:59)The only time I don't get the error is when I change the label from component ID to (which is a string containing an integer, e.g., 1234) to start/stop stage (which is another string containing an integer, e.g., 04, 11). If I attempt to change from component name (a string containing a string, e.g., "mesoderm"), say, to component ID, I get the error. So it's not about the length of the string, since component name is invariably longer than the ID, and the ID could be longer than the start/stop stage.
oh, this is the code I have for the capabilities bit - no more complaints there
private void setCapabilities()
text.setCapability(text.ALLOW_APPEARANCE_READ);
text.setCapability(text.ALLOW_APPEARANCE_WRITE);
Appearance appearance = text.getAppearance();
appearance.setCapability(appearance.ALLOW_TEXTURE_READ);
appearance.setCapability(appearance.ALLOW_TEXTURE_WRITE);
Texture texture = appearance.getTexture();
texture.setCapability(texture.ALLOW_IMAGE_READ);
texture.setCapability(texture.ALLOW_IMAGE_WRITE);
}Any ideas, anyone?
aba.

How to modify the OIDDAS Create User page

I am using Portal 902 and want users to register themselves to my Portal. I've have enabled Self-Registration but the pages need much cosmetic re-work for my purposes.
I've discovered how to replace the default db generated SSO Login page with a customized JSP * AND * I wondering if I can do the same to the OIDDAS Create User page.
I've noticed that the URL for the create user page is http://thebofer.my.domain:7777/oiddas/ui/oracle/ldap/das/admin/AppCreateUserInfoAdmin.
This file (AppCreateUserInfoAdmin) is a UIX file and the only place I've found it is within "oiddas.ear" located at F:\oracle\ora9ias_portwire\ldap\das\oiddas.ear directory on my Portal host.
Can I simply unpack the EAR and get the "AppCreateUserInfoAdmin,uix" file into JDev, modify it, then re-package it into the ear and then overwrite the existing ear with this new one? Is this acceptable?
Also, I'm wondering about the location of the oiddas.ear file. Normally when I deploy to 9iAS the file usually ends up in the F:\oracle\ora9ias_portwire\j2ee\home\applications or the F:\oracle\ora9ias_portwire\Apache\Apache\htdocs. What is the proper deployment process when modifying OIDDAS UIX?
Are my assumptions correct? Can someone point me in the right direction?Long postings are being truncated to ~1 kB at this time.

This text is not a translation managed in the DB. you can modify the aspx page, directly. web\webcommon\login.aspx

How to get the Trusted Identity Login Page with the needed parameters to make custom login screen instead of sharepoint Login Page?

hi guys
i have configured trusted identity provider for my public facing internet portal, but i dont want to use the login screen
since i have about 10 site collection which will use this authentication.
is there a class or property that gives me the url ready with the parameters like "wa" and "wtrealm" and the redirect url based on the place the user click the link from.

You can create your own login page and specify the URL for it in the authentication provider settings of a Web Application or Zone. So the easiest way to do what you want would be to extend your existing Web Application to a new Zone, change the login
Page url to point to use your custom zone, and tell users to use the url of that zone to login with the custom provider you have built.
If you want a single zone then you will need to modify a copy of the login page you display above and have it redirect to a custom login page for your identity provider if the pick the correct entry in the dropdown.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

How to Modify The Text That Appear in Context Help?

Hello,
I searched, but could not find any result.
Actually I am using a code from "Find Example" of Labview. I have modified it for my application and hence, I must modify the context help (as some of its dicription is not true anymore). Would anybody able to suggest me how to do it?
Thanks,
Dushyant

Right click on the VIs Icon and select VI Properties. In the Category drop down ring select documentation. Edit the text. The text in VI description is what will be displayed in LabVIEWs context help.
Chad

How to change the text in Logon Page in NWDS7.3/EP7.3

Hello Experts,
I am using NWDS7.3, & there is a requirement to change the text "User authentication failed " to some custom text. The message generally comes when you use wrong used id and password while logging portal url.
I have downloaded the WAR file and extracted the Jar file(tcsecumelogonui_core.jar) to change the text under logonLabels.properties file but i can't see the key with respect to the message "User authentication failed". I cannot find the message in the .properties file.
Can any one please help me to fix the issue.Any help will be rewared with points.
-Regards
Alok

Dear Detlev,
Thanks a lot for your valuable answer. I have found the text for the "User Authentication Failed" , done the changes and depoyed the Jar file . This is working.
But the same when i try to do for "Authentication failed. Password locked" this message comes when i do multiple failed login. I need to change the text , i found the text in the u2022sap.comtcjesecurityimpl.jar file, i made the changes in the JAR file ,replaced with the server jar file and restared.
But the changes did'nt get reflected. Can you please suggest if i am chaning in the correct JAR file?. I am working in NWDS7.3
Can you please help me on this. Appreciate your help .
-Regards,
Alok

How to modify the text property of a textobject when it contains a formula.

I have a textobject with a text property of
"Accounting Period to {@periodend}"
When I try and modify it though it changes {@periodend} to literal text and it doesn't get evaluated.
I'd like to modify the textobject without losing the formula.
Thanks in advance,
J

Sorry about that. I'm using
VB.Net 2008 (for prototype, translating to C# for production) 9.0.30729.4462 QFE.
CR2008 12.3.1.684
CrystalDecisions.CrystalReports.Engine 12.0.2000.0
CrystalDecisions.CrystalReports.Design 12.0.2000.0
CrystalDecisions.Shared 12.0.2000.0
I'm thinking that a clue might reside in the RAS but my version iof CrystalDecisions.ReportAppServer.ReportDefModel is 12.0.1100.0
J

How to change the http regular login page

The iFS/HTTP authenticates users as Guest automatically. Can someone tell me how to change it back to the login dialog? Thanks.

Hey,
Thanks for the reply, but I didn't understand much.
Guess I'm just going to try and look on why I can't change the context path when deploying a webservice package using ant tasks.
Thanks again for the reply.
William

How to print the text in only last but one page in sapscripts

hiiiiiiiiiii,
explian how to print the text in only last but one page in sapscripts? wher to write the code? plz if possible explain in detail with an example?

Hello,
The total no pages is given by &SAPSCRIPT-FORMPAGES& command.
So u can handle the situation in ur form like this
/: if &PAGE& = &SAPSCRIPT-FORMPAGES&
p1 TEXT
/: endif
Try in this way it may help u.
Regards

HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS

HI,
   HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS?

in ur script main window
/: IF &TTXSY-PAGE& = 15.
ur text or standard text
/: ENDIF.
use this.
hope it helps if any issues revert back

How to enlarge the text or characters on web pages permanently

I need to know how to enlarge the text or characters permanently. I have difficulty reading the characters of each new page. Every time I zoom in to enlarge characters, the new page automatically returns to small characters. Please help.
Cheng Lin
[email protected]

Try one of these extensions:
*Default FullZoom Level: https://addons.mozilla.org/en-US/firefox/addon/6965
*NoSquint: https://addons.mozilla.org/en-US/firefox/addon/2592/
**More NoSquint info: http://urandom.ca/nosquint/
 
'''Other issues needing your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Adobe PDF Plug-In For Firefox and Netscape
**New Adobe Reader X (version 10) with Protected Mode just released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
*Shockwave Flash 10.0 r42
*Next Generation Java Plug-in 1.6.0_22 for Mozilla browsers
**No security issues corrected in version 1.6.0_23, but, according to Oracle/Java, some stability issues resolved.
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''. Note separate links for:
#**Plugin for Firefox and most other browsers
#**ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
#*Also see "Manual Update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

How can I change the text color in pages

Hi , how can I change the text color in pages app

Select the text you want to change.
Tap the i in the top bar.
Tap Style in the top bar.
Tap the Font name/size
Tap Color then choose the color you want the text.

How can i modify the text created by create_text FM

Hi Gurus,
How can i change a long text created using create_text FM?
I couldn find any FM to modify the text!
Thanks.

Hello Umit,
Sorry...I mislead you. the function to edit the content of a long text is SAVE_TEXT and not RENAME_TEXT.
In SAVE_TEXT FM, fill this information.
In HEADER parameter, enter your TDOBJECT, TDNAME, TDID, TDSPRAS and TDTITLE information.
In SAVEMODE_DIRECT parameter put an X value
In LINES table, put your new content.
Execute it.
Confirm it after, using READ_TEXT function.
Regards,
Bruno

How to modify the text in login page?

Similar Messages

Maybe you are looking for