How to modify the blob size, or how to set the size?

i want to know how to modify the blob size, or how to set the size?
what's the default size of blob?
Thanks in advance.

Blob datatype can contain binary data with a maximum size of 4 GB.
when you enter 10kb file, the database will only use 10kb to store the file (depending on block size etc)
if you want to modify the blob size, you may do like this:
SQL> create materialized view t_mv refresh fast on commit
2 as select id, dbms_lob.getlength(x) len from t;
Materialized view created.
SQL> alter table t_mv add constraint t_mv_chk check (len < 100);
Table altered.

Similar Messages

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." Any thoughts, Thank you.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.

Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Settings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist.

Downloaded the app Top 100 Hits. Set the auto lock to never. Sound stops in 30 seconds, what can I do to correct this?

Downloaded the app Top 100 Hits. Set the auto lock to "never". Sounds stops in 30 seconds. What can I do to correct this. MaNUAL DOESN'T EXPLAIN.

I advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex

Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferenc

Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferences i choose. Anyone else have any other ideas? I am about to lose my mind... I hate you ADOBE!!!

that s just the problem, that is why my level of frustration is boiling over ... I have told InDesign over and over again "Do Not Show Again" but it will just not hold the settings. It might hold it for a day or so, but then suddenly there it is again on another launch. Very very annoying.

I am running Mac OS 10.6.7 I cannot run a java based program from the net when parental controls are set the error is The error is Load: class installer.CheckVersion 13. class not found Help!

I am running Mac OS 10.6.7 I cannot run a java based program from the net when parental controls are set the error is The error is Load: class installer.CheckVersion 13. class not found

Then, talk to the person running the lab.

How to Modify Search for Leads using Date types in the Assgmnt Block Date

Hello Experts,
I have a requirement to modify the search for Leads using Dates in the Assignment Block Dates and using the Posting Date of the transaction.
Any ideas?
Thank you in advance,
Justin

If you look at the grants, you'll see that there are over 170 objects from the FLOWS_030000 granted to PUBLIC:
SQL> select count(*) from dba_tab_privs where owner= 'FLOWS_030000' and grantee = 'PUBLIC';
173
If we were go grant these privileges to a role, called APEX_APP_RU, and grant this role to APEX_PUBLIC_USER and any schemas an application is linked to (Workspace to Schema), would that be a workable solution?
The only problem I see right off hand that this might not work is that PUBLIC has synonyms created for the FLOWS_030000 objects. If we revoke the underlying privileges, because of the synonyms, this might not work.
SQL> select COUNT(*) from dba_synonyms where table_owner = 'FLOWS_030000' and owner = 'PUBLIC';
176
Does anyone else have any ideas?

How can i target a movie of which i set the name based on a variable?

Hi.
I have the attached code:
And i want to target the imgHolder
; that i have just created through the while function. I mean I
attach a movieclip from the library to which I give a name composed
from "imgHolder"+i where i is the number of the node from the xml.
After that i want to succesfully target the newly created
movieclip and get it's _x so i can attach the next movieclip next
to the previous one. After that i will have a set of function based
on the "imgHolder"+i movieclip.
But i need to know how to succesfully target the movieclip.
Thanks a lot.

use the attach code option to display code in this forum.
otherwise, your code is altered and difficult to read.

How to print the PDF file contains stamps without set the printer options

I have pdf document, and stamp them with my personal stamp.
With the printer option under "Comments and Forms", I set to "Document", my stamp DISAPPEARED.
Unless re-set (use options) to "Document and Markups" or "Document and Stamps" then it will be fined.
Can I embeding my stamps to my document so that everyone can print without using printer options to contain stamps?
(regarding to whoever don't know how to set the printer options, and keep asking that I did not stamp on the doc.)
Please help.
Thanks in advance.
th

Can I embeding my stamps to my document so that everyone can print without using printer options to contain stamps?
Yes, you can.

How to modify F4 help of one parameter based on the value of another?

Hi,
My Query is as follows:
I have 3 select-options / parameters on the selection screen.
If I enter some value in the first parameter the values in the second parameter should reflect accordingly.
For example: The 3 selection-screen parameters are:
select-options: s_werks for pa0001-werks no intervals,
                      s_btrtl for pa0001-btrtl no intervals,
                      s_kostl for pa0001-kostl no intervals.
On exceuting the report, say I do a F4 and select '1000' for the first parameter (s_werks).
Now after selecting the value for the first parameter if I do a F4 on the second parameter (s_btrtl) then it should prompt me with a F4 help containing values only corresponding to '1000' entered in s_werks and not all the values maintainined for btrtl.
I have tried AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_BTRTL-LOW.
And then used the FM F4IF_INT_TABLE_VALUE_REQUEST.
But At Selection-Screen On Value Request the selection screen parameter s_werks does not show any value. It reflects the value only once it reaches Start-of-selection.
Can anyone please guide me how to go about it?

hi
Please do it in this way..
TABLES: pa0001.
select-options: s_werks for pa0001-werks no intervals,
s_btrtl for pa0001-btrtl no intervals,
s_kostl for pa0001-kostl no intervals.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_BTRTL-LOW.
PERFORM sub_pop_btrtl .
*&      Form sub_pop_btrtl
      text
--> p1        text
<-- p2        text
form sub_pop_btrtl .
DATA : l_wa_dynp TYPE dynpread,
        l_i_dynp TYPE STANDARD TABLE OF dynpread,
        l_wa_temp LIKE LINE OF S_werks.
REFRESH s_temp[].
l_wa_dynp-fieldname = 'S_WERKS-LOW'.
APPEND l_wa_dynp TO l_i_dynp.
Get the screen values of template
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
    TABLES
      dynpfields           = l_i_dynp
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc <> 0.
Do Nothing
ENDIF.
Put the screen value in the select-options
READ TABLE l_i_dynp INTO l_wa_dynp INDEX 1.
l_wa_temp-sign = 'I'.
l_wa_temp-option = 'EQ'.
l_wa_temp-low = l_wa_dynp-fieldvalue.
Now you use l_wa_temp as plant field
endform.                    " sub_pop_btrtl

How to modify horizontal.xsl to add few columns in the Result table?

I would like to add few input parameters from my parameter variables in my report table using horizontal.xsl. It is like add columns to the table. Can someone advise?
thanks
rgds,
toko

toko,
maybe you want to take a look here.
hope this helps,
Norbert B.
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to make Firefox (Mac) not go back a page upon pressing the Cmd+Left-Combination which should set the text cursor to the beginning of a line in input fields instead of leaving the page?

On a Mac, Cmd+Left places the text cursor to the beginning of the line, Cmd+Right to the end of the line.
FireFox however goes back resp. forward a page in hinstory, which is ''most annoying'', since it very often causes me to accidentally leave a still unsubmitted form and loose all input!
I did not find any possibility to get rid of these dreadful keybindings.

Thanks for your response.
I guess I didn't revert to as far back as the change I had made because when I follow your instructions, no entries are bold.
Or did you perhaps mean the next time the problem occurs I should look for a bold entry? And then change it back to what it was? (All that I recall from a year ago was that I changed one entry from ''true'' to ''false'', or vice versa.)

HT4972 Why can´t I update my iphone 3gs? I complete all the steps, but when I am setting the phone, after choosing my wi-fi, is not possible to activate

I have just updated my iphone 3gs from iOS 4.1 to the last one which give me iTunes, by iTunes, I introduced my language, country, wi-fi, and when I got the step of activation iPhone, I got a message that says
"your iphone could not be activated because the activation server is temporarily unavlaible. Try connecting ypur iPhone to iTunes to activate it, or try again in a few minutes."
The thing is, that I am connected to iTunes, so Can anyone tell me how can activate it?
Thank you very much

So know, according to this, what should I do with my phone?because it is not working anymore...
I read in other post that no more information could be provide here, but although you couldn´t give me it, are there any possibility to get it working back?

Why does my macbook pro forget the wifi network when i only set the iPhone to forget it?

i just dont get. what is the logic behind the mac synchronises network access between devices? i set my iPhone to forget a certain wifi network and now my macbook pro also forgot it, so i had to reset my router for this. pretty annoying. any workaround if i want iCloud to keep my passwords synchronised but not sure up the network access instantly on all devices?

I had to call Apple and the tech made me enter a bunch of terminal commands to fix this. Unfortunately I can't tell you excactly what it was. I think the best way would be to call Apple.

Why do my photos get blurry when they are enlarged to full screen from the disc I burn, or played on the t.v.? I set the burn on the highest quality. The photos don't look blurry when enlarged from iphoto on the computer.

Why do my photos that are transferred from iphoto to idvd, and then burned on DVD, look blurry when the idvd is shown full screen on computer or on t.v. They don't look blurry when I enlarge the iphoto pics on the computer. I used the 'prof. quality" encoding setting before burning, and before putting photos on idvd.

Hi
DVD is as standard - only interlaced SD-Video (as on old CRT-TVs) and can never be any better than this.
This is less than a quarter of Your Mac screen resolution.
That's one part of Why You can see High res. on Your Mac - and not on DVD.
Next part is what program is used to make the SlideShow.
If You use iMovie'08 or 09 or 11 - to make it - it too degrades the final result as non of them can deliver interlaced SD-Video to iDVD but only half (every second line in the picture)
I use
• iMovie HD6 or
• FinalCut (any version) or
• FotoMagico™
As they all delivers 100% of what iDVD or Toast™ or DVD Studio Pro or Whatever needs.
Yours Bengt W

Unable to open the xclock in RHEL even after setting the display

Hi All,
I''ve install the oracle on linux before that i need to se the diplay in order to launch OUI however I couldnt make it.
and the showstopper is shown below.
[root@Machine1 Desktop]# DISPLAY=192.168.0.129:1.0
[root@Machine1 Desktop]# export DISPLAY
[root@Machine1 Desktop]# xhost +
xhost: unable to open display "192.168.0.129:1.0"
[root@Machine1 Desktop]#
Could any please help on this ASAP.

Ramu Jagini wrote:
Hi All,
I''ve install the oracle on linux before that i need to se the diplay in order to launch OUI however I couldnt make it.
and the showstopper is shown below.
[root@Machine1 Desktop]# DISPLAY=192.168.0.129:1.0
[root@Machine1 Desktop]# export DISPLAY
[root@Machine1 Desktop]# xhost +
xhost: unable to open display "192.168.0.129:1.0"
[root@Machine1 Desktop]# LOL.
First and foremost - get out of the habit of using root unless absolutely required. You will not be able to use root in the real world and using it now for this kind of activity will simply introduce wrong habits.
Working as root most of the time ... Bad habit. Bad bad habit. Anyone teaching to log in and stay as root ... shame. In business, auditors will note the habit and user will be reprimanded, up to and including 'go find a new job - you are not the SysAdmin'.
Secondly - you need to understand xhost, and indeed 'display ownership'. When you log in to the Desktop, your screen is 'owned' by a userid. You use xhost (unwisely most of the time) to give permission to others to display on your screen.
Thirdly - you need to understand the influence of DISPLAY variable - it tells programs where they should display... on an authorized display ... such as the one authorized by xhost.
Since you want to do it the wrong way, use the following sequence:
1) Log all the way out of Linux and the desktop (all the way - ensures you don't have screwed up environment)
2) Log in (whatever user you wish - even the bad habit, go stand in the corner, root user)
3) Open a new terminal and give permission to the world to use your screen and get the IP address of the machine. Prior to this xhost command do NOT su (nor set DISPLAY); do not cross Go; do not collect $200
4) Open a new session, preferrably on a different computer (but open new terminal and then 'su - (otheruser)' will do)
5) Under that new user, tell it to display on the IP address and screen from step 3
6) Run xclock
But ... to install Oracle s/w, the 'right way' is to simply log all the way out and then log in to a new desktop as the non-root Oracle owner (on the machine; or using Xming or Xceed or ...; or using VNC client such as UltraVNC or TightVNC)
Did you notice that logging in as root by habit is a bad idea?

How to modify the blob size, or how to set the size?

Similar Messages

Maybe you are looking for