How to monitor the Activation process of a request in DSO
Hi all,
I have loaded the data ( 7 million) records in DSO as a new request. I have clicked on the activation button.
Can any one tell me where can we check the status of this activation process of this request?
When clicked on monitor or logs button it shows me all as status green, but not able to figure out where to check the status of activation process.(the data is still not activated )
any help would be great.
Thanks in advance.
Regds,
Maddy
Hi,
There are a couple of places where you can see the activation progress.
1) To start with SM37 job log > (give BI_PROCESS_ODSACTIVAT or BI_ODSA*)
and it should give you the details about the activation job. If its active make sure that the job log is getting updated at frequent intervals.
2) For very huge number of records SM37 job log may not get update frequently. In that case you have a workaround.
Go to contents > Active Data table > No. of entries > This will keep on increasing at frequent intervals.
3) SM66 > Get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
4) Go to Activate button in Target > Request tab. Inside you can see a job log button. It will also show some log regarding the last activation.
Thanks,
JituK
Similar Messages
-
How to monitor the wrapper process flows
Hi,
I have a process flow(main wrapper) which contains the 2 child process flows(child_PF1, child_PF2). which looks like below.
start -> Child_PF1 -> Child_PF2 -> end
I am able to run the the process flows successfully. I want to monitor the process flows and the % of completion of the process flow.
I am able to check the parent and child process flows seperately. I am unable to link the parent process flow to its child work flows. Can anyone explain how to link/track the Parent process flow to its child process flows.
When i open the Parent process flow i was able to see the child process flow as an operator. But i was not able to view the contents child process flow further.
Oracle Workflow server version is 2.6.4
OWB version is 10.1.0.4
Thanks in Advance,
SriGP.Hi,
the following SQL works with OWB 10.2.
SELECT to_char(x.created_on,'dd.mm. hh24:mi') as created_on,
--x.root_id as r_id,
sys_connect_by_path(x.map_name, '/') AS NAME,
step_name as target,
--x.map_name as map_name,
--x.run_status,
x.number_records_updated + x.number_records_inserted + x.number_records_merged + x.number_records_deleted AS "#R",
--x.number_records_selected AS "#S",
--x.number_records_inserted AS "#I",
--x.number_records_updated AS "#U",
--x.number_records_merged AS "#M",
--x.number_records_deleted AS "#D",
NVL(x.elapse_time, round((x.updated_on - x.created_on) * 86400)) AS secs,
x.status
FROM (SELECT r.top_level_execution_audit_id AS root_id,
r.parent_execution_audit_id AS parent_id,
r.execution_audit_id AS audit_id,
r.created_on,
r.updated_on,
coalesce(substr(m.map_name, 2, length(m.map_name) - 2), r.execution_name) AS map_name,
r.return_result,
s.elapse_time,
m.run_status,
s.number_records_selected,
s.number_records_inserted,
s.number_records_updated,
s.number_records_merged,
s.number_records_deleted,
s.step_name,
s.run_status as step_status,
s.elapse_time as step_time,
s.step_id,
p1.VALUE AS p1,
coalesce(e.run_error_message, msg.message_text, s.run_status, m.run_status, r.return_result, 'RUNNING') AS status,
msg.message_text
FROM all_rt_audit_executions r,
all_rt_audit_map_runs m,
all_rt_audit_map_run_errors e,
all_rt_audit_step_runs s,
(SELECT execution_audit_id,
message_text
FROM all_rt_audit_exec_messages
WHERE message_line_number = 1) msg,
(SELECT p.execution_audit_id,
p.parameter_name,
p.parameter_kind,
p.VALUE
FROM all_rt_audit_execution_params p
WHERE p.parameter_kind = 'CUSTOM'
AND p.parameter_name = 'OTIM_ID') p1
WHERE 1 = 1
AND r.execution_audit_id = p1.execution_audit_id(+)
AND m.map_run_id = e.map_run_id(+)
AND m.map_run_id = s.map_run_id(+)
AND r.execution_audit_id = m.execution_audit_id(+)
AND r.execution_audit_id = msg.execution_audit_id(+)) x
WHERE 1 = 1
AND x.created_on > trunc(SYSDATE) - 0
CONNECT BY x.parent_id = PRIOR x.audit_id
START WITH x.parent_id IS NULL
ORDER SIBLINGS BY x.root_id DESC, x.audit_id DESC, x.step_id DESCMaybe your are lucky and it will work also with OWB 10.1.
Regards,
Carsten. -
How to monitor the work processes in a Java instance?
Dear Experts,
In an abap system, we can use sm50 to check the processes of the user, and also the memory consumption of each user, but how do we do that in an JAVA only instance?
I was told by one of my colleagues that i could enter a command to generate thread dumps and from there i could analyze which class is giving the trouble, but he cannot recall what command is that, anyone have any idea for that?
Replies are very much appreciated.The equivalent of SM50 (dpmon) is jcmon, you can also monitor your engine from NWA.
Read
http://help.sap.com/saphelp_nw04s/helpdata/EN/d3/4d074147c1f06fe10000000a1550b0/frameset.htm
Regards
Juan -
How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!
Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy -
How do I monitor the listener process
After starting the listener, I have to wait for few min. before I connect to the database.
Otherwise I get the following error.
How do I monitor the listener process and make sure, still it is trying to
establishing connection with oracle instance ?
thanks
sivaAfter starting the listener, I have to wait for few
min. before I connect to the database.That's normal when the registration is dynamic (no SID_LIST in listener.ora). This does not happen if the listener is started before the DB. See http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14212/architecture.htm#sthref429
But you can force the registration. As sysdba do
SQL> alter system register;
or you can statically configure your DB within listener.ora, SID_LIST section.
How do I monitor the listener process $ lsnrctl status
and
$ lsnrctl services -
I have just had a Windows XP failure and took the opportunity to replace with Windows 7. After I reinstalled PhotoShop CS(1) the message "Memory could not be allocated for the activation process. Please close all applications and try again" is shown and forces PhotoShop to close. I have 4Gb of Ram installed and a total of about 10Gb of Page File space on three partitions of a 500Gb HDD. The system is not heavily loaded! However, I cannot access Photoshop to check scratch disk allocation. How to fix???
Back to topYes, there are many forums, and it can be confusing. Your question has the best chance of being answered if it is in the proper place. I think it is there now.
Pattie
http://forums.adobe.com/message/5092533#5092533 is your post address
Download and installation forum:
http://forums.adobe.com/community/download_install_setup -
How to list the active savepoints in a session?
How to list the active savepoints in a session?
SR 3-4535479801: How to list the active savepoints in a session?
Oracle Support - September 19, 2011 7:12:50 AM GMT-07:00 [ODM Answer]
=== ODM Answer ===
Hello,
That is the only way and it is also described in:
How To Find Out The Savepoint For Current Process (Doc ID 108611.1)
One thing to be aware in lower version is the dump if no savepoints are declared:
ALTER SESSION SET EVENTS 'IMMEDIATE TRACE NAME SAVEPOINTS LEVEL 1' Raises ORA-03113/ORA-07445[SIGSEGV]/[STRLEN] Errors (Doc ID 342484.1)
Best regards,
George
Oracle Support Database TEAM
Oracle Support - September 19, 2011 6:36:39 AM GMT-07:00 [ODM Question]
=== ODM Question ===
How to list the active savepoints in a session?
Is there another way than the following as referenced in the Oracle forums: Re: How to list the active savepoints in a session? ?
"alter session set events 'immediate trace name savepoints level 1';"
A trace file is generated in the user_dump_directory.
- September 17, 2011 5:12:53 PM GMT-07:00 [Customer Problem Description]
Problem Description: How to list the active savepoints in a session?
Is there another way than
"alter session set events 'immediate trace name savepoints level 1';"
A trace file is generated in the user_dump_directory.
Re: How to list the active savepoints in a session? -
How to see the active users in the AS JAVA?
Hi Experts,
In as java how to see the active users in the system.Kindly,tell me step by step details to find the active users.As I'm new to the Netweaver administration.
Thanks,
ReddyHi,
You can find the login sessions with Timestamp and User in Visual Admin under SecurityProvider and tab Runtime and Login sessions. You might also get these details in NWA->Monitoring->Availability.
Regards, Rahul -
How to continue the running process behind the model dialogue box options ?
How to continue the running process behind the model dialogue box options like this
In Updation of K7 user press the Cancel Button
New dialogue box appear with Yes/No options.
But the backend updation is going on... not Pause the updation.
Like this how to do ?
Please provide me code.I don't know, if you mean you have done your form or you have solved the problem.
It's visible your code is only partly reflecting your screenshot, and that's okay to demonstrate the problem you have given a fine example.
As you marked my suggestion as solution this may not be needed anymore, but here's how I modified your code and used a self made QuestionBox instead of messagebox.
The essential part is defining a callback method and letting the QuestionBox call back there. It's not essential I used RAISEEVENT, but it's fine as it has all the behaviour and parameters needed to call back.
Public oTestFrm
oTestFrm=Createobject("MyForm_Model_to_NonModel")
oTestFrm.Show
Define Class MyForm_Model_to_NonModel As Form
onxx = 0
Add Object lbl_DispValue As Label With Top=90, Left = 120, Width = 50, Height=30, Caption=''
Add Object cmd_Start As CommandButton With Top=120, Left = 120, Width = 50, Height=30, Caption='Start'
Add Object cmd_Stop As CommandButton With Top=120, Left = 190, Width = 50, Height=30, Caption='Stop', Enabled =.F.
Procedure cmd_Start.Click
This.Enabled =.F.
Thisform.cmd_Stop.Enabled =.T.
Thisform.onxx = 0
Do While Thisform.onxx < 90000000
DoEvents
Thisform.onxx = Thisform.onxx +1
Thisform.lbl_DispValue.Caption = Transform(Thisform.onxx)
Enddo
This.Enabled =.T.
Thisform.cmd_Stop.Enabled =.F.
Thisform.lbl_DispValue.Caption = ''
Procedure cmd_Stop.Click
* Here, I want NO PAUSE -- (Show running numbers continuously...)
* how to control Model to NonModel in Messagebox.
QuestionBox('Really stop the process', Thisform, 'handleanswer')
Endproc
Procedure handleanswer
Lparameters tlYes
If tlYes && means Stop
Thisform.onxx = 99999999999999999
Endif
Endproc
Enddefine
Procedure QuestionBox()
Lparameters tcMessage, toCaller, tcCallback
If Not Pemstatus(_Screen,"oForms",5)
_Screen.AddObject("oForms","Collection")
Endif
oMsgBox = Createobject("QuestionBoxForm", tcMessage, toCaller, tcCallback)
_Screen.oForms.Add(oMsgBox)
oMsgBox.Show(2)
Endproc
Define Class QuestionBoxForm As Form
Autocenter = .T.
AlwaysonTop = .T.
Minwidth = 200
Add Object label1 As Label With AutoSize=.T., WordWrap =.T.
Add Object cmdYes As CommandButton With Caption = "Yes", Width=40
Add Object cmdNo As CommandButton With Caption = "No", Width=40
Procedure Init()
Lparameters tcQuestion, toCaller, tcCallback
Thisform.label1.Caption = tcQuestion+" ?"
This.AddProperty("oCaller",toCaller)
This.AddProperty("cCallback",tcCallback)
This.Width = Max(This.Minwidth, Thisform.label1.Width)
Thisform.label1.Left = (This.Width-Thisform.label1.Width)/2
This.Height = Thisform.label1.Height+48
This.cmdYes.Left = This.Width/2 - 10 - This.cmdYes.Width
This.cmdNo.Left = This.Width/2 + 10
This.cmdYes.top = Thisform.label1.Height+24
This.cmdNo.top = This.cmdYes.top
Endproc
Procedure cmdYes.Click
#Define clYes .T.
Raiseevent(Thisform.oCaller,Thisform.cCallback,clYes)
Thisform.Release()
Endproc
Procedure cmdNo.Click
#Define clNo .F.
Raiseevent(Thisform.oCaller,Thisform.cCallback,clNo)
Thisform.Release()
Endproc
Enddefine
I didn't yet introduced a timer for counter display updates. As you see the counter hangs a bit, if you mouse over your form, but it is a way of multithreading without using a separate thread and instead keep the rest of the application active by DOEVENTS
in the long running loop code.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH http://www.tmn-systemberatung.de -
How to find the active workflows in the system
Hi,
we are going for upgrade, we want to find out the active workflows in the system
please guide me, how to find the active workflows in the system
is there any standard table to find the active workflows in the system
please suggest me the step by step process to find the active workflows.
thanks,
chandraWelcome to the Forums.
Please go through the FAQ of the Forum.
You has posted your query in the wrong Forum, this one is dedicated to Oracle Forms.
Please try {forum:id=1050}.
Regards, -
Monitoring the running process
hi all!
i am working on antispyware.
my problem is:
how to monitor the computer running processes from the attacking of any spyware/virus
if some one has sample code, plz send me
plz guide me in this regard, so i can proceed in my work.
best regardsThanks.
That makes no sense. Especially given that listener handles the connect and then no longer is involved in the communication between client and database.
I would strongly suggest you check Metalink, or even open a service request. This sounds like it could be a memory leak. Do it now, while it is still possible - 9i goes into extended support in a few weeks and bug fixes will be difficult to arrange. -
Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
ThanksYou got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars -
I recently tried upgrading my iphone 4 to the new OS 5, and now itunes won't continue the activation process. It keeps say that an unexpected error has occured, Error 310. I am very frustrated and now have no phone to call apple, and there website is no help. What do I do?
Hi seth fromhollywood,
I found this in internet, I hope it helps:
Error
-310
Name
SmFHBlockRdErr
OS
Mac OS
Error Title
smFHBlockRdErr
Message
Error occurred during _sGetFHeader.
Risk Level
9
for resolution look here ... -
Hello,
Just purchased a new laptop:
Intel Core 2 quad
4gb memory
1000 HDD
Photoshop CS 8.0 disc dead/scratched/unreadable. So I copied my Adobe folder from my Program Files Folder on my PC and pasted on laptop. When I try and run PS I get the error message "Memory could not be allocated for the activation process. Please close all applications and try again". Which I do then Photoshop closes.
Can anyone help (in layman terms please)?Not really. You are essentially FUBARd. Without a proper install, there is usually no way on to get the licensing stuff working. You might be able to get there by installing any other CS product, so PS could latch on to the licensing system that would be already in place, but otherwise it's a lost cause. Simply copying over the executables is normally not enough. I will admit though, that I skipped CS, so there may be some tool somewhere that I don't know about can do this post facto...
Mylenium -
How to stop the running process chain
How to stop the running process chains or infopackges...just qm status change is enought?
BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job
Maybe you are looking for
-
I have successfully installed Windows Vista RTM on my Qosmio F20-155 device. The installation went smooth and everything is fine. I have the following problems which I suppose are common with everyone else: - No SD card support - Waiting for new nVid
-
A classpath error while importing a class with @page import property
Hi , I am using Tomcat contaniner for jsp applications. I have developed a page that i have import a class. when i use <%@ page import="myclass" &> i got an error that myclass not found. I have placed into tomcat\webapps\myproject\web-inf\classes dir
-
Update/create the purchase info records
Hi All, i got a requirment for update/create the purchase info records for the transaction ME11. i came to know that the FM <b>ME_DIRECT_INPUT_INFORECORD</b> is suitable for this requirment. but when i am trying to test this by passing data to I_EINA
-
Error when log into sql developer as sysdba
Hi iam able to loging in oracle 11g from command prompt as sysdba, the same when iam tried from sql developer with same credentials as sysdba its showing error invalid user or password. Could any one help me out o n ths pls?
-
ATI Mach64 Video drivers for PowerMac 4400
Hi! I have one of these machines that I just put in an ATI Mach64 PCI video card and was wondering about drivers for this card. Do I need to find and install them or does OSX 8.1 already have them? I am from a Windows world so bear with me. Thanks! D