How to mount USB Flash Drive

Hello again Arch-Linux users,
I always search google very hard and for months (off and on) I search for how to mount a USB Flash Drive. Nothing ever work so I give up than try again months latter. I don't want to give up anymore and that is why I join this forum.
Here are some of the code I found on the net. Some of these commands will only re-mount the entire Arch-Linux running system in /mnt/usbstick.
sudo mount -o rw,noauto,async,user,umask=1000 /dev/sda1 /mnt/usbstick
... don't work it only re-mount the entire system
/dev/sda15 /mnt/usbstick vfat user,noauto,unhide 0 0
... don't work... I found nothing inside /mnt/usbstick
mount -t vfat -o rw,nosuid,nodev,quiet,shortname=mixed,uid=1001,gid=100,umask=077,iocharset=utf8 /dev/sda1 /mnt/usbstick
... don't work... here is the error i get:
mount: /dev/sda1 already mounted or /mnt/usbstick busy
mount: according to mtab, /dev/sda1 is mounted on /
It strange that most USB mount commands use the operating system partition itself- example: /dev/sda1 as the device for USB device, while others use /dev/cdrom for cd - /dev/dvd for dvd and /dev/fd0 for floppy.
Could someone post the code that will easily mount a usb device under Arch_Linux.
I'm using Arch-Linux core-64 (08-2009)
Thanks in advance
Last edited by sharris (2010-06-17 21:58:43)

Thanks fsckd,
I needed a rapid reply because I been wasting too much time not getting anything done because I needed to get pass this flash-drive thing. I can now have a secure back-up in my pocket on USB to go. Arch-Linux does it better for what I seen while just dd'ing on disk.
...lsusb
Found it
http://gd.tuwien.ac.at/linuxcommand.org … susb8.html
Thanks demian,
sdb is the location for my single hard-drive machine. I saw it before in my list above but I changed it to sda1 because I knew no better. I had no clue it represent a 2nd hard-drive for LINUX if one is not already present.
This did it for me
Thanks again

Similar Messages

How to erase USB flash drives?? Thanks, Michael

How to erase USB flash drives on my MacBookAir ?? Thanks, Michael

Welcome to Apple Support Communities
To erase them, you can use Disk Utility, in /Applications/Utilities > http://pondini.org/OSX/DU1.html
When you open Disk Utility, choose the external disk in the sidebar, go to Erase tab and erase the disk

How to use USB flash drive in XFCE?

Hello,
How to mount/unmount USB flash drive in XFCE?
Thanks for your help,
Anand

http://wiki.archlinux.org/index.php/AutoFS_HowTo might be interesting

How to use usb flash drive

So i tried to use a usb flash drive to save a word document on my macbook, but i couldnt find the flash drive, or even where to find the usb port. can somebody tell me how to use a usb flash drive on macbooks?

The USB ports are on the left side.
Just plug in the drive, and it should show up on your desktop (or in the Finder - click the happy face icon in your dock). Drag and drop the files into the drive. Or, select the drive as the save location when you pick Save or Save As in Word.
When you're done, drag the drive's icon to the trash (it will change to an eject symbol), or click the little eject symbol next to it's icon in the Finder. You can then safely unplug the drive.

How to detect USB Flash Drive name in LabVIEW

Hi there
I was looking for how to detect a USB Flash Drive name in Labview
appearently every time i insert USB Flash Drive in a computer, windows assign it a different name
once "J:" and sometimes "M:"
Is there anyway to obtain USB Flash Drive name programmatically in Labview ?
Because in my program an user shouldn't be able to access HDD Drives except his USB Flash Drive (for inserting some file ...)
thank you and excuse me for my poor english

I was able to get the demo.vi to load, but it could not load the other two because there is no block diagram associated with those. I'm not sure why this is. I haven't had any issues with other llbs before.
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

How to install USB flash drive in windows 7

Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.

Hi,
Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to format USB flash drive?

I recently received a USB flash drive at a traveling covention. It has two partitions and one is unwritable and is filled with travel brochurs etc etc. I was wondering if it was possible to reformat the whole thing back into 1 partition. I already tried disk utility. Thanks!

Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

How to find USB flash drive in FINDER if it doesn't appear

I inserted USB flash drive in MacBook Air, but cannot find it in FINDER, my operation system is OSX 10.9.4

Does it show in Disk Utility? If so, Finder Preferences may be the problem. Open them and check the settings:
Ciao.

How to mount USB & CDROM drives from single user mode - Solaris boot disk?

Hi All,
I need to carry out ufsrestore on a single newly replaced system disk (no redundancy / mirroring) from either USB or CDROM drives from the following steps:
( i ) GRUB => e, e, cdrom –s, Enter, b (boot from Solaris 10 x86 media).
( ii ) Choose menu 1 for Install Solaris Interactive Mode to reach single user mode.Below are the commands that I have tried in single user mode without success:
mount –r –F pcfs /dev/dsk/c1t0d0p0 /cdrom (after unmount Solaris CD)
mount: /dev/dsk/c1t0d0p0 is not a DOS filesystem.
svcadm –v enable smserver
svcadm: Pattern ‘smserver’ doesn’t match any instances
svcadm enable autofs
svcadm: Pattern ‘autofs’ doesn’t match any instances
devfsadm
devfsadm: mkdir failed for /dev 0s1ed: Read-only file system
mkdir /mnt
mkdir: Failed to make directory “/mnt”; Read-only file systemPart of the problem is due to the current READ ONLY filesystems which does not allow the creation of mount point such as /mnt.
I have been able to create both / root (/dev/dsk/c1t0d0s0) and /export/home (/dev/dsk/c1t0d0s0) filesystems with newfs that are awaiting for restore using ufsrestore.
The only option I am left with is to attach a secondary disk to install Solaris 10 on either of them before bring the system to multi-user mode so that service such as volmgt, autofs, volfs are available to access USB & CDROM drives.
Any suggestion on how to resolve this issue?
Many thanks,
Jack

Hi JKGN,
Is the directory a located under the root filesystem. ie /a? Are there any other mount point for say USB drive as well? I am not in a position to try it out right now but will get back
to you soon on whether /a exist or not.
Btw, the last thing I managed to do on this system at the time was added a secondary 1TB internal disk with the intention to restore both / and /export/home data onto this disk while
making use of all the disk device management services such as the following services only available in a fully installed Solaris system (both single & multi-user modes) installed on the
primary disk:
# svcs smserver
STATE          STIME    FMRI
online         Jun_08   svc:/network/rpc/smserver:default
# svcs autofs
STATE          STIME    FMRI
online         Jun_08   svc:/system/filesystem/autofs:default
# devfsadm
# iostat -En
c1t0d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: ATA      Product: SAMSUNG HD321KJ Revision: 0-11 Serial No:
Size: 320.07GB <320072932864 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 41 Predictive Failure Analysis: 0
c0t0d0           Soft Errors: 0 Hard Errors: 5 Transport Errors: 0
Vendor: PHILIPS Product: DVD+-RW DVD8801 Revision: AD21 Serial
Size: 17.54GB <17538875392 bytes>
Media Error: 0 Device Not Ready: 5 No Device: 0 Recoverable: 0
Illegal Request: 10 Predictive Failure Analysis: 0
c2t0d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: JetFlash Product: Transcend 16GB   Revision: 1100 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 7 Predictive Failure Analysis: 0
# rmformat
Looking for devices...
     1. Volmgt Node: /vol/dev/aliases/cdrom0
        Logical Node: /dev/rdsk/c0t0d0s2
        Physical Node: /pci@0,0/pci-ide@1f,1/ide@0/sd@0,0
        Connected Device: PHILIPS DVD+-RW DVD8801 AD21
        Device Type: DVD Reader/WriterHowever, I was disappointed that "iostat -En" has not found the secondary disk (1 TB) even though it was available earlier, for Solaris installation as the only disk on the same system.
As a result, I am left with no option but the need to rebuild this system with only a single primary disk while in single user mode. However, the single user mode that I am in is the
one from Solaris installation disk with restrictive (_cannot create folder for mount point or running disk management utilities_) capability such as those services just covered, compared to one from a completed Solaris installation system with full access to all filesystems and utilities / commands in general.
I would very much value your assistance on how to mount both CD & USB in this restrictive limited Read Only OS (assume that it is running from memory) in order to get complete access to
the blank primary disk so that full restore with ufsrestore could take place.
Thanks in advance,
Jack
Edited by: 797805 on 9/06/2012 04:15

How to reveal USB flash drive files?

Running on Maverics 10.9.3
I saved my AutoCAD files onto my USB drive a few days ago. Today, I opened my USB again and all of my files are missing. I know they're not deleted because there is used space in the USB drive.
It is a 4gb flash drive and I'm using over 5 mb of it. They're small files, no more then 200 kb each.
ALSO. I downloaded a recovery app online and it SHOWED the missing files in my flash drive...unfortunately it said i had to upgrade/ purchase the full version in order to recover it.
It has my homework in it so I need help.

IT WORKED. Thank you, my homework is found!
I did "Is " ENTER, then dragged the thumb drive to terminal and then it did that poof effect and the usb drive no longer showed in the Devices tab in Finder. I searched the name of my usb drive, found the drive, and the files were there!!
I can see my files, now there's a different situation. I have to search the flash drive name in order to open it. It no longer shows in the Devices area in Finder. How can I show it again?

How to reformat usb flash drive after formatting it in mac

I know this might sound stupid but I used a 16gb kingstonflash drive for a backup for my macbookpro since there are only few to back up and I was thinking I can copy the backup files to an external disk after. With that said, I used the time machine and it said that it would erase everything on the USB. I clicked okand then once the flash drive was "made compatible", it started to backupbut the total file is 34gb so I can't use the flash drive as back up.
I tried reformatting the flash drive, but the total free space is 198mb and even if I removed the partition or erase ( I see a hitachiand kingstonpartition when I looked at the disk utility) it never goes back to the 16gb. I checked it with windows and the USB space is also 198mb out of 198mb (free space) I don't know where the 15.9gbwent.
Any help is greatly appreciated.

Them do it on a Mac with Disk Utility.
On Windows you might have to first delete all the partitions before you can select Convert to MBR.
But try it on OS X.
Open Disk Utility with the drive connected and select the Top name of that drive in the left most area of the window.
Then in the Partition Layout drop down select 1 Partition. Then the Options... button will become active, select that button.
Select Master Boot Record and click OK. The format should already be MS-DOS (FAT) but if it isn't select that. You can give it a name or not. Then Click the APPLY button.

How to clear usb flash drive

Just would like to clear flash drive (usb) so I can use it again. Why does apple make it so hard to do, on my HP the erase message always came up. Please help, Thanks

It's not so hard, but you must adapt to the way of do that on OS X. To erase any disk:
1. Open Disk Utility (in Utilities folder) and choose the disk you want to erase (in your case, the USB drive) in the sidebar.
2. Go to Erase tab, choose the format you want to use with the USB drive and press Erase

10.5.1: Unable to mount a USB flash drive.

I've seen this problem posted elsewhere, but so far I have yet to see a solution:
After upgrading my MacBook Pro to 10.5.1, it can no longer mount USB flash drives. They show up in System Profiler as well as the USB Probe tool, but do not show up in Disk Utility (and, obviously, not on the Desktop or listed in /Volumes).
I checked the drives on a co-worker's MBP, also running 10.5, and the problem persisted there. The drives mount and work fine under 10.4, as well as various flavors of Windows. When plugged into the MBPs, the status LEDs light up, so they are getting power, and mice plugged into the USB ports work fine.
So, the problem seems to be specific to mounting a USB flash drive in 10.5/10.5.1. I'm not sure if this is specific to MacBook Pros, or if the issue is the same on all 10.5 machines.
Any help would be appreciated.

I have the USB problem. When I insert my USB memory pen, it flashes then stops. The icon doesn't come up on the Desktop, but the memory shows up on the System Profiler.
My USB telephone responds in Skype, but the sound input and output don't show up in Preferences, and so the phone doesn't work.
My Vodaphone USB internet modem won't connect.
This morning, I have no sound at all.
All these problems are resolved if the computer is restarted with the external source already plugged in, but it's a big hassle and must be solvable............

How to get i photos to go on usb flash drive sandisk?

how can I get i photos to go on usb flash drive sandisk?

Kappy wrote:
Try selecting them and dragging them to the mounted flash drive. Or select then CTRL- or RIGHT-click and select Copy from the options list. Open the Finder on the flash drive and press COMMAND-V to paste your selection to the flash drive.
Note that dragging or pasting does not give you any control over the photo - you get the current preview with no metadata - the export command is a better way since it lets you make your own choices in what is exported and how much metadata is included
LN

Mount a USB Flash Drive

I am running a 1998 iMac with a PowerPC Processor. It has MacOS 8.5.1. I have a PNY 2 GB USB Flash Drive. How do I mount this.

The link says it won't work with G3(which is what I have).
Where does it say that? Both the 8.6 update and the USB Mass Storage Support 1.3.5 are OK for a 1998 iMac (with 8.5.1 right now). Since the USB Mass Storage Support 1.3.5 requires 8.6, install that update first.
Oh, and I forgot to mention the only means of transporting data is through a CD(which I can burn).
Yes, you can transfer files on a CD. Use a CD-R (not CD-RW).
If you are using a PC for the downloads, make sure that the files are kept unaltered. Do not try to decode the MacBinary (.bin) on the PC. Once on the iMac, use an appropriate version of StuffIt Expander (which, hopefully, is there already) for the decoding (drag the .bin file onto the StuffIt Expander program icon). Otherwise, special software (such as TransMac) will be needed on the PC in order to correctly handle Mac files.
The iMac is not connected to the internet.
If necessary, that can be resolved within minutes. The iMac has a built-in modem for a dial-up connection, or it can be connected to a broadband router by means of an RJ-45 Ethernet cable.
Jan

How to mount USB Flash Drive

Similar Messages

Maybe you are looking for