How to Open the FailedFilesLog.txt File (statement), and How to Increase the 100 File Limit (question)

It took us a while to figure this out, so I'm posting this in case it's helpful for someone out there. Plus, I have a question...
DPM gave the following error for one of our file servers:
Description: The replica of Volume D:\ on <servername> is inconsistent with the protected data source. Number of files skipped for synchronization due to errors has exceeded the maximum allowed limit of 100 files on this data
source (ID 32538 Details: Internal error code: 0x809909FE)
Recommended action: Review the failure errors for individual files from the log file
\\?\Volume{8492c150-f195-11de-a186-001cc4ef89a0}\B1E9D373-2C03-464E-A472-99BC93DB1E2A\FailedFilesLog.txt and take appropriate action. If some files fail consistently, you can exclude the folders containing these files by modifying the protection group or
moving the files to another location.
So, how do you actually open the FailedFilesLog.txt file shown in this DPM alert? What is this path referring to? Well, this is the mount point for the protected server's replica volume on the DPM server, which is mounted under \Program
Files\Microsoft DPM\DPM\Volumes\Replica\servername\File System. Here you'll see the mount points for all of the server's protected volumes. However, if you try to open one of these mounted volumes
in Windows Explorer, you'll get Access Denied, even if you have administrator rights. (If someone knows of a way around this, please let me know). As a workaround, you can access this mounted volume in an elevated
command prompt. Steps:
Open an Administrator Command Prompt
Type mountvol <AnyAvailableDriveLetter>: \\?\Volume{VolumeGUID}
Example: mountvol m: \\?\Volume{8492c150-f195-11de-a186-001cc4ef89a0} Note that we're only using the first part of the path to the FailedFilesLog.txt
file given in the DPM alert, starting from \\? and ending after the
} character.
Next, type m: to change to the newly mounted m: drive.
Then type cd B1E9D373-2C03-464E-A472-99BC93DB1E2A This is actually a folder name so we're just going into this folder.
Finally type dir and you should see the FailedFilesLog.txt file. This file can be copied to another location where it's easier to use (i.e. in Windows Explorer).
Be sure to unmount this volume when you're done by typing mountvol m: /d in the command prompt. (Mountvol reference:
http://technet.microsoft.com/en-us/library/cc772586(WS.10).aspx.)
What a pain, eh? But at least by reviewing the FailedFilesLog.txt file you can determine which files or folders caused the sync to fail and thus take action accordingly.
Now, here's my question: Where is that registry key that lets me adjust the limit of 100 files that DPM allows to be skipped before it fails the replica? Hopefully someone out there will tell me. I know this can be done because Kapil Malhotra
said so in this post:
http://groups.google.com/group/microsoft.public.dataprotectionmanager/browse_thread/thread/a179fa30fb50c9b0/e9a348f2a9386063?lnk=raot.
Also, does anyone know what the internal error code 0x809909FE means in this alert? Knowing this my help us determine what caused these files to fail. Interestingly, in the FailedFilesLog.txt file, it gave a different error code next to each failed file:
0x80070002.
-Taylorbox

Thanks for responding, Fahd. So, just to be sure...
Do I add this registry key to the DPM server or to the protected servers (or both)?
In either case, the ContinueOnFailure key does not currently exist. So, I must create this key and the MaxFailedFiles DWORD value
manually, right?
Does the server in which I create this regkey have to be restarted for it to take affect?
Can the DPM alert for the 0x809909FE error event (for exceeding the limit of 100 failures) please be adjusted to provide a path to the FailedFilesLog.txt file
that actually works if you click on it?
Any ideas on why the 0x80070002 "File not found" error happened? The files on the server were simply created and then deleted. Why would such file activity lead to this error?
Thanks,
-Taylorbox

Similar Messages

How to open a page from a Form and pass parameters to the form on that page

I found a similar example on this forum, but it did not work for me:
declare
l_names owa.vc_arr;
l_values owa.vc_arr;
i number;
begin
PORTAL.wwpro_api_parameters.retrieve(l_names, l_values);
FOR i in 1..l_names.count
LOOP
htp.p(l_names(i) || ' ' || l_values(i));
END LOOP;
end;
By using this method i get the parameters for the Form, like the session ID, but not the parameters for the Page that the form is displayed in.
Another method I tried:
To open a Form from a Form and pass parameters works fine like this:
--In the After processing page PL/SQL event.
declare
v_id number;
blk varchar2(10):='DEFAULT';
Begin
v_id:=p_session.get_value_as_number (p_block_name=>blk,p_attribute_name=>'A_ID');
if v_id > 0 then
htp.formOpen('PORTAL.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=2649500412&p_arg_names=_show_header&p_arg_values=YES&p_arg_names=ID&p_arg_values='||to_char(v_id),'post');
htp.formSubmit(NULL,'Upload Files');
htp.formClose;
end if;
End;
But I want to open a Page containing the Form instead of just opening the Form. Is this possible to open a Page and pass paramters to the page, and then let the form inside the Page access the passed paramters. The reason for this is that a Form cannot be based on a page template, or can it? When opening the form i want to keep the left menu, which I can if it is a page based on my template with the left menu.
Best regards
Halvor

Hi,
You can do this by calling the url of the page with the form. You can then use p_arg_names and p_arg_values to pass parameters. In the called form you can get the value from p_arg_names and p_arg_values and assign it to the form field.
You can call this code in the success procedure of the calling form.
declare
v_id number;
blk varchar2(10):='DEFAULT';
v_url varchar2(2000);
Begin
v_id:=p_session.get_value_as_number (p_block_name=>blk,p_attribute_name=>'A_ID');
v_url := <page_url>;
if v_id > 0 then
call(v_url||'&p_arg_names=id&p_arg_values='||v_id);
end if;
End;
In the called form in "Before displaying form" plsql section write this code.
for i in 1..p_arg_names.count loop
if p_arg_names(i) = 'id' then
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_ID',
p_value => p_arg_values(i)
end if;
end loop;
This code picks up the value from p_arg_values and assigns it to the form field.
Hope that helps.
Thanks,
Sharmila

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

Why does the new version not have back-up disc in the library file? And how do I fix it?

Why does the new version of i-tunes not have back-up to disc in the library file? And how do I fix it?

Fast backup for iTunes library (Windows)
Grab SyncToy 2.1, a free tool from MS. This can be used to copy your entire iTunes library (& other important data folders) onto another hard drive or network share. You can then use SyncToy periodically to synchronise or echo your library to the backup. A preview will show which files need to be updated giving you a chance to spot unexpected changes and during the run only the new or updated files will be copied saving lots of time.
If your media is all organised below the main iTunes folder then you should also be able to open the backup library on any system running the same version of iTunes, regardless of the drive letter or path it appears on.
Step-by-step guide to using SyncToy.
tt2

How do I import multiple Ai files into one Indesign File - whilst still keeping the Ai Files editable and up dateable for the one Indesign File?

Hi All,
Im relatively new to Ai and Indesign, and have been doing Uni work over Christmas, and have a rather urgent question thats stressing me out.
I originally had many art boards in my ai file, but due to the number, I split these into single files to help my computer run better.
Now I want to organise them into one document to save. From searching online Indesign can import these and save as one file, yet automatically update if the original ai file is updated. I would like to do this but just don't know how to do this correctly?
Any help would be greatly appreciated.
Im using CC Ai and indesign.
Thanks in advance
Sam

Yes, effectively I would like to catalogue the files into one collection so i can save as one PDF and Print as one.:)
I know I could save each AI as a pdf them then merge the pdf's together in acrobat, but I have nearly 100 files so would feel more comfortable seeing them all together before print / saving.
My concern is that if I insert them in Ai, will the file resolution reduce? and will the ai still be editable and would it update the indesign file?
Thanks for the quick reply

How to open a URL without session ID and reuse the current browser session?

Hi All,
I have a question about HTMLDB 2.0
How to open a URL without session ID and reuse the current browser session?
That was the behaviour in HTMLDB 1.6 ...
My usecase for this is the following:
We have written an issue tracking application, which sends e-mail to the interested users, when something happens.
In these email we've put a link to some page, with some parameters in the URL.
The idea is for the user to be easy to click on the hyperlink and to see the details of the ticket.
When the user clicks on such a link he is directed to a login screen (page 101) and he enters his Username and password, and is then forwarded to the details for the ticket.
Then he receives another email (e.g. for another ticked). He clicks on the link and :
a) in HTMLDB 1.6 he goes to the details as he didn't close his browser and session is remembered
b) in HTMLDB 2.0 he is prompted to enter username, password with the username populated
Please tell me how can I achieve the same behaviour in HTMLDB2.0 as it was in HTMLDB 1.6.
I understand this change is somehow security related, althogh I don't understand how. If you can explain this either I would be very happy?
Best regards,
Mihail Daskalov

Mihail - I detailed a couple of approaches here: Re: Application Link
Scott

HT204406 I opened i Tunes on my mac and while i see the songs in some of my playlists they will not play. The computer says the song could not be used because the original file could not be found. Would you like to locate it? When i do it won't play.

I opened i Tunes on my mac and while i see the songs in some of my playlists they will not play. The computer says the song could not be used because the original file could not be found. Would you like to locate it? When i do it won't play.

You will need to locate where you itunes library is and then relink one of the songs, itunes will do the rest. So if your itunes library is on an external hard drive or something like that. When you get the error message click yes you would like to locate it. then navigate to the external hard drive where the itunes libray is and locate that particular song. Once you have linked one, itunes will ask if you would like it to locate the rest, click yes and it will find the rest of the files if they are in the same location.

Why do all the programs open when the mini is turned on, and how to avoid this?

why do all the programs open when the mini is turned on, and how to avoid this?

Open System Preferences > Users & Groups then select the Login Items tab.
Remove all apps listed there.
And check /Library/StartupItems
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/StartupItems
Click Go then move all items from the StartupItems folder to the Trash.

How do I put the file name and path into either the header or the footer?

I need to keep track of pdf documents as their names or locations sometimes change. I need to show both file name and path, preferably in the header. I would also like it to refresh automatically when I change, say, the file name, but that's not as essential as the basic function of showing the file name and path.

You will need to do this with a text field and a Javascript that executes on open.

HT4796 Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

Migration assistant failed after 90% of the way; where are the files now and how do I get rid of them?

Hello. It looks like I recovered all my keywords attached to photos. What I did:
First I located all photos without keywords using a metadata search.
I found that it seemed to be certain groups of photos that had no keywords. I decided to at least get the main keyword on all of those in a particular group, like Canyonlands.
Once I added one of the keywords, the others all showed up magically! I then went to each group of photos and added the main keyword, and the others came along and attached to the photos.
Don't understand why this occurred or why it got fixed, since it was so random. But, I'm glad to have my keywords restored (I had divided flowers by color, etc. so it was a lot of work!)
Thanks for the discussion and help.

My iphone automatically locked and it does not open again,but if u call the sim that was inserted you will hear that it was active,so please help me how to open my iphone 4,no display appeared if you touch the switch button

my iphone automatically locked and it does not open again,but if u call the sim that was inserted you will hear that it was active,so please help me how to open my iphone 4,no display appeared if you touch the switch button,

Hello arlyn-cavite,
If the screen is not showing anyting when you press any of the buttons you may want to try these steps.
From article iPhone: Hardware troubleshooting http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Take care,
Sterling

My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

If your fonts are changing when viewed on other computers - epecially those running windows - you need to look at using web-safe fonts...
http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
Also make sure you clear your browser cache before viewing you published files.

After connecting my iPhone to my Macbook Pro to download photos to my phone, my pages application is now gone from my computer. The icon is still in the dock. What happened and how do I get it back?

After connecting my iphone to my Macbook Pro to download photos to my phone yesterday, my Pages application is gone from my computer. The icon is still in the dock. What happened and how do I get it back? Its not in my trash or anywhere else.

The other 2 applications open like normal. All three give me info.
Pages     ver.4.1          265.8MB
Numbers ver. 2.1          89.5MB
Keynote ver. 5.1.1        238.1MB
They all list Apr 3 as the last time opened. That was when I upgraded to Mavericks. I certainly used pages and numbers since then as I have alot of my work files on this computer?
Just very odd. I did find my original iWorks disc from when I bought the computer. I'm assuming i can reinstall it. Will try that. Thank you for all your help. Would still like to know what did happen?
Kat

The action (restore User State) has been skipped because the condition is evaluated to be false.

Hello,
At one time my OSD Task Sequence captured network settings and User state (documents, settings, etc) from a refreshed system (same pc), but now it doesn't. In Task sequence I am getting "The action (restore User State) has been skipped because
the condition is evaluated to be false."
==============================[ OSDSetupHook.exe ]============================== OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
Executing task sequence OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat". OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
Debug shell is enabled OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Successfully enabled debug command shell support. OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Configuring local administrator account OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Re-assign all drive letters... OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
The drive information which has no drive letter can not be found. No need to re-assign driver letters. OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Installing SMS client OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Client already installed. OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Moving logs to SMS client directory OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Successfully moved logs to SMS client log directory: C:\WINDOWS\CCM\Logs\SMSTSLog OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Executing task sequence manager bootstrap OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Executing command line: "C:\WINDOWS\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:6 OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Command line: "C:\WINDOWS\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:6 TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Current OS version is 6.1.7601.1 TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Logging successfully initialized. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Resuming Task Sequence in Full OS TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
We are going in GINA and potentially need to set the authenticator TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Executing command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Register:WinPE TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
==========[ TsProgressUI started in process 1952 ]========== TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
Command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Register:WinPE TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
Registering COM classes TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
sbModulePath = C:\WINDOWS\CCM\TsProgressUI.exe TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
Unregistering class objects TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
Shutdown complete. TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
Process completed with exit code 0 TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Successfully registered TS Progress UI. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Found network adapter "Intel(R) Dual Band Wireless-AC 7260" with IP Address 0.0.0.0. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Found network adapter "Intel(R) Ethernet Connection I218-LM" with IP Address 169.254.45.132. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Starting Task Sequence Manager. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
executing TS Manager not in full media TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
executing TS Manager in c:\windows\ccm TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Executing command line: "TsManager.exe" TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Successfully intialized Logging for TS Manager. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Commandline: "TsManager.exe" TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
/service parameter found at index: -1 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
/standalone parameter found at index: -1 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
/noclient parameter found at index: -1 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Successfully registered Task Sequencing COM Interface. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Executing as a standalone exe TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Initializing TS Environment TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Opening Task Sequencing Environment TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Path variable OSDisk converted from 28A047320000401F00000000: to C: TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
NOT executing in WinPE TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling Config policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling config policies... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling SysHealthConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Decompression (zlib) succeeded: original size 684, uncompressed size 4648. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling SoftUpdConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Decompression (zlib) succeeded: original size 1926, uncompressed size 19238. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling SoftDistClientConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Decompression (zlib) succeeded: original size 1331, uncompressed size 13736. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling NAAConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Decompression (zlib) succeeded: original size 1026, uncompressed size 6490. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling RebootSettingsConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Decompression (zlib) succeeded: original size 433, uncompressed size 1554. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling AppManClientConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Decompression (zlib) succeeded: original size 983, uncompressed size 6354. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Get Install Directory for SMS Client TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
RequestedConfig policy instance(s) : 436 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D}") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 3/31/2015
8:55:50 AM 1624 (0x0658)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
RequestedConfig policy instance(s) : 0 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:FSC successfully TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:FSC") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 3/31/2015 8:55:50
AM 1624 (0x0658)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:FSC successfully TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
RequestedConfig policy instance(s) : 0 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 3/31/2015 8:55:51
AM 1624 (0x0658)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
RequestedConfig policy instance(s) : 0 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
RequestedConfig policy instance(s) : 9 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
RequestedConfig policy instance(s) : 42 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 3/31/2015
8:55:51 AM 1624 (0x0658)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Total RequestedConfig policy instance(s) : 487 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
New/Changed ActualConfig policy instance(s) : 0 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Policy evaluation initiated TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Query = 'CCM_SoftwareDistributionClient
Thanks in Advance,
Mark

You need to determine why USMTLOCAL is being set to "True". . .
It is set to Not Equal to True.
Evaluating a variable condition expression TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
Variable = OSDStateStorePath TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
Value = TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
Operator = exists TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
Expand a string: exists TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
Expand a string: OSDStateStorePath TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
Expand a string: TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
The variable condition expression is evaluated to be FALSE TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
The AND expression is evaluated to be FALSE TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
The action (Restore User State) has been skipped because the condition is evaluated to be false TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)

Compensation Review Statement and current status of the salary increase of employee

How to check Compensation Review Statement and current status of the salary increase of employee from which table or structure
1 In Planning
2 Submitted
3 Approved
4 Rejected
5 Active

Hi Ross,
Did you find any solution for this requirement? I amtrying to achieve the same.
I tried the option of opening the application in Administrative mode from SE80 but i am not able to view these button in the UI elements there.
Regards,
Umesh Chaudhari

How to Open the FailedFilesLog.txt File (statement), and How to Increase the 100 File Limit (question)

Similar Messages

Maybe you are looking for