How to open the forms in Form 9i which are saved and compiled in Forms 10g?

Dear all,
i have froms created with form 10g. now i want to open it in form 9i it gives the following error:
FRM-30085 : Unable to adjust form for output.
can i open it in form 9i?
Regards:
Muhammad Nadeem
[email protected]

you can't downgrade forms through different versions. Never ever do that. It's not supported.

Similar Messages

  • How to delete the queries in  BW Production which are no longer existing.

    Hi,
    How to  delete the queries in BW production which are no longer existing in DEV.
    1. I tried Using RSZDELETE in Production it is not getting deleted and the below message given.
    Query object 4A7V83T3RB4ABIOKSDJT2HWDL is blocked. Deletion has been cancelled.
    2. I tried creating another query in dev with the same technical name and send a transport with deletion
    it is not working.
    Please advise me on this for any function module or any other method.
    Thanks
    Surya

    Hi,
    If you transported the query from DEV and now you want to delete it, you should open a BEx request (Dev Class under which it was originally transported -- or-- Standard - type) in DEV delete the query and move the transport to Production.
    As far as your error is concerned, usually  when you  can delete a query using the delete option in query designer itself,
    Business Explorer> query-> delete objects , when you press execute the system offers you a list of dependent objects on the query(workbook,views), in case the sysytem is unable to delete them i.e.they being used as a input query for a characteristic variable (replacement path),then system throws this error.You can delete these all depndents under there prescribed roles , fav s & then proceed.
    Hope this will be expedite.
    Thax & regards.
    Vaibhave Sharma

  • How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

    Hi All,
    We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
    Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

    Hi,
    Here you go..
    1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
    Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
    2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
    3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
    This step you get query reference sheet or column or query general UUID for next step.
    4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
    Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
    Hope this helps.
    Please keep in mind, it might take more time depends on how many query elements you have in the system...
    Comments added for better DB performance by: Arun Thangaraj

  • How to list the files in a directory which are recently modififed few mins

    Hi,
    I need command to list the files in a directory which are modified few minutes ago in SunOS. like "find . -cmin 2 -print " which list files that are modified 2 mins ago in Linux platform.
    Thanks in advance.
    sudha85

    The find command that comes with solaris doesnt have the cmin operator. Only mtime whose option is days.
    So install gnu find from sunfreeware which is the same one that comes with linux.

  • How to calculate the difference of two totals which are of the same group?

    Post Author: mingli
    CA Forum: Formula
    Hello,
    I have an existing report which has a group defined. The group generates two set of data, at the footer of each set of data, the total is calcuated. Now I need to calculate the difference between the totals. For example:
                             value
    set 1
          item 1         100
          item 2         200
          item 3        300
    set 1 total         600
    set 2
         item 1         200
         item 2          20
         item 3        300
         item 4         40
    set 2 total       560
    difference       40
    My question is: how can I do this? I'm thinking about create a formula. But the problem is, these two totals have the same field name. Could someone help me out?
    Thanks.

    Post Author: deejayw
    CA Forum: Formula
    Hi,I have a similar type of query...my Sets only ever contain two entries but there is an unknown number of sets.                        value
    set 1
          item 1         100
          item 2         200
    difference (item2 - item1) =   100
    set 2
         item 1         200
         item 2          20difference (item2 - item1) =    -180
    Set 3, Set 4, etc, etc I need to figure out how to calculate the "difference (item2 - item1)" total above. I am really confused by this and need assistance. Many thanks. 

  • How to get the values of drop downs, which are gonna create at run time.

    As per my design requirement, I have to create drop downs in an ADF display table.
    The no# of rows of the table are gonna decide the no# of the drop downs. User can select the values from drop downs. My issue is, how can I capture the selected values of those drop downs as those are gonna created run time.

    Hi
    ohh ,ok ,then as u said that u r storing twenty values ,thats y i aksed earlier ,are these form values part of tbale ,or as u said 20 values are there ,for these u r creating 20 form values ???.
    My suggestion would be ,u do four calculation and put all your results in a hashmap ,and keep this hash map in to sesion ,using the following method
    pageContext.putTransactionTransientValue("HashMapName",myHashMap);
    and inside the PFR method when u want to display these values ,u can loop through your hashmap and can display these values.
    like this
    HasMap hm=pageContext.getTransactionTransientValue("HashMapName");
    thanx
    Pratap

  • How to send the notification email to users which are in workflow in ucm

    Hi All,
    Does anyone know how to configure ucm to send the actionable notification email to particular users in workflow?
    Please Help!!!!

    The send mail function will send mail to the users and or alias in the workflow step where you invoke it. The IDOC script guide will help you with implementing these kinds of things.
    http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/sdk/idoc_script_reference/wwhelp/wwhimpl/js/html/wwhelp.htm
    IDOC script by usage / Workflow
    wfNotify is the one you want to look at specifically.
    Workflow
    The following Idoc Script variables and functions are related to workflows.
    Configuration Variables
    isRepromptLogin
    IsSavedWfCompanionFile
    PrimaryWorkQueueTimeout
    WorkflowDir
    WorkflowIntervalHours
    Global Functions
    getValueForSpecifiedUser
    Workflow Functions
    wfAddActionHistoryEvent
    wfAddUser
    wfComputeStepUserList
    wfCurrentGet
    wfCurrentSet
    wfCurrentStep
    wfDisplayCondition
    wfExit
    wfGet
    wfGetStepTypeLabel
    wfIsFinishedDocConversion
    wfIsNotifyingUsers
    wfIsReleasable
    wfLoadDesign
    wfNotify
    wfReleaseDocument
    wfSet
    wfSetIsNotifyingUsers
    wfUpdateMetaData
    Other Variables
    AllowReview
    dWfName
    dWfStepName
    entryCount
    IsEditRev
    IsWorkflow
    lastEntryTs
    SingleGroup
    wfAction
    wfAdditionalExitCondition
    wfJumpEntryNotifyOff
    wfJumpMessage
    wfJumpName
    wfJumpReturnStep
    wfJumpTargetStep
    wfMailSubject
    wfMessage
    wfParentList
    WfStart

  • How to get the data from a table which are availble in MD04

    Hello,
    Can you please let me know the tables in which the 'data available in MD04' are stored.
    I would like to have the data pertaining to the customer order/Item with requirements available in MD04.
    Thanks and Regards,
    Jana.

    Probably the easiest way in this case is to run the performance trace (System/Utilities/Performance trace). Start transaction MD04, put on the trace in another window, press enter to see the stock/requirements list, then stop the trace and list the results. Then you'll see which tables were accesses with which queries.

  • How to open the forms in Browser.

    Dear all,
    can anyone tell me how to open the forms develop in form 6i in browser like Internet Explorer.
    Muhammad Nadeem

    Hi,
    The following Host built-in takes you to the specified site,
    Host('Netscape http://www.oracle.com');
    Best Regards,
    Deepak Rai
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Rama Ala ([email protected]):
    Hi,
    We can open internet browser by using HOST command in FORMS. How to open specific URL into the browser through FORMS.<HR></BLOCKQUOTE>
    null

  • HOW TO OPEN THE COMMON DIALOG

    hOW TO OPEN THE COMMON DIALOG AND TO PIC AN IMAGE FOR EXAMPLE

    In the layout editor, create an ActiveX control. Right click on the activex control and select 'insert object' -> Microsoft Common Dialog Control. Now, click on Program -> import ole library reference -> MSComDlg.CommonDialog. Select all method/event packages and click OK. This will create a number of new packages in your Form. Use MSComDlg_ICommonDialog.ShowOpen.

  • How to use xml forms which are built by using xml forms builder?

    Hi Experts,
    please explain How to use xml forms which are built by using xml forms builder in Web page composer?
    Thanks,
    Anil.

    hi buddy u can try the following page:
    http://help.sap.com/saphelp_nw70/helpdata/en/8f/fe743c74fa6449e10000000a11402f/frameset.htm

  • My 2008 Mac Pro running Lion will not play HDV1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. Anyone have any idea how to fix this?

    My 2006 - 2008 Mac Pro running Lion will not play HDV 1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. However, when I open the project on my other Mac Pro running Snow Leopard and FCP 6, the footage works fine as it does on my newer Imac running Mavericks and FCP 7. I have tried a Quicktime update on the Mac Pro that the footage doesn't work on but it says that I already have the newest version of Quicktime installed. I have also tried reinstalling the Final Cut Pro Studio twice, still no fix. I'm completely out of solutions and need to be able to edit HDV footage on this machine. Any help would be great. Thanks.

    there was a recent software update that seemed to screw HDV up.  Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
    Worst case scenario, do as Shane suggests.  But might I suggest you take a look at the user tips section of the forum.  there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

  • I think I have opened the sobig.f virus in my hotmail account and it keeps seding emails to my contacts. How do I stop it, and will it effect any of my other transactions like internet banking/shopping, is it safe?

    I think I have opened the sobig.f virus in my hotmail account and it keeps seding emails to my contacts. How do I stop it, and will it effect any of my other transactions like internet banking/shopping, is it safe To continue using my ipad ?

    This isn't due to malware. There is no known malware capable of infecting an iPad that has not been jailbroken (ie, hacked to allow apps from outside the App Store).
    As lizdance40 says, your Hotmail account has been hacked remotely. Change the password immediately. Hotmail accounts are popular targets, but as long as you choose a good password, and make sure that password is not the same as a password you use with any other account, you should be safe.
    I disagree with lizdance40's statement that you have to abandon the account and create a new e-mail address. If a hacker is able to get back in even after changing the password, the problem is not with the account itself. There's another vulnerability of some kind somewhere. Perhaps the account allows hackers to leave a "back door" to get back in (such as with GMail's delegation feature), in which case any such feature needs to be reviewed and have settings changed. Perhaps you are checking mail in an insecure manner while on an insecure network (ie, a wireless network that requires no password). Perhaps you are using a password on multiple accounts, and a different account has been compromised. Perhaps a hacker has used knowledge gained by prior access to your account to achieve "social hacking" (ie, convincing a tech to give him access because he has "forgotten the password"). There are many scenarios, but there's no good reason to abandon the account entirely.

  • HT4796 I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.

    I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.

    Send it as a PDF.

  • Please help with "You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported." I have seen other responses on this but am not a techie and would not know how to start with that solution.

    Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
    I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
    Please help with what I need to type, how, where, etc.
    Many thanks
    AppleSueIn HunterCreek

    I am afraid there is no solution.
    PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
    You could contact the developers to see if they have an updated version in the pipeline.

Maybe you are looking for