How to open the same applet over multiple clients.

hi all,
i am making a applet application .The same applet has to be opened at the same time at different client and the changes in the information upon the applet page must be reflected at all the clients how can i do that plz sujjest me.
Thanks in advance.

You would have to have all of the applets connect to a "server applet" on one of the computers. When the applet starts, you could give the choice to host or connect to another host using an ip address and port, using the ServerSocket and the Socket classes. However, this requires multiple threads running, but is quite possible. The server would need threads to accept clients, receive information, and send information (plus the built-in gui and event threads). The clients would need a thread to receive information from the server and update the applet page.

Similar Messages

How do use the same crop for multiple images.

I have a number of images that I want to use the same crop on. Instead of go through the whole slow process for each image is there a way to use the same crop for all of the images?
And in iPhoto there was a way to copy the adjustment settings to multiple images, I can't see how to do that in aperture.

Use the "Lift&Stamp" tool:
Crop one image.
Lift the crop using the "Lift" tool.
Select the other images.
Stamp the crop adjustment to all of them.
But caution: By default "Lift" will copy all Metadata tags and all adjustments, but the gps data. If you only want to transfer the cropping rectangle, deselect all lifted items but the crop adjustment before stamping.
Regards
Léonie

Firefox: Drag and drop access revoked if open the same applet in new tab

I have an uploader application that allows for drag and dropping of files from the desktop, works great. In Firefox 3, if you go to the uploader and drag files onto it it works, if you then open a new tab in the same window and navigate to the URL that contains the application you can drag and drop files into that new application window, if you go back to the previous tab however you can't drag and drop files on to that instance of the app anymore. Is this a known issue?
Thanks,
Sam

This is an applet?

How to deploy the same WebService to multiple servers

Hi
I have to deploy the same webservice + its clients to multiple servers. However, the WS URL is hardcoded in its descriptor, as well as in the client, so it means that I have to rebuild everything each time I want to deploy it to a new server.
How can I set the URL dynamically at runtime?
Thanks a lot
Jean-Noel

Hi There,
I think what you can do is once you create your webservice , it has a property called
SOAP RPC URL which you can edit before you create the wsdl and the client.
Hope that helps
Kishore

How to copy the same address for multiple contacts in Address Book?

Hi! I got a question, I didn't find an answer for yet.
How to copy the post address from one contact to another, without manual entering. I mean if I have one contact with already entered post address, can I just copy it someway at once to another contact?
I don't want cards to merge, I need separate contacts, that may have different phones, e-mails, but the same post address. Please, advise.

Thanks! yes, this is a solution I'm following now. But I was wondering about the similar way as it is made in Daylite or Contactizer - you create company with name and post address first, and then can create a contact for that company. And company name and post address will appear in contact name.
I just wonder why such a simple and useful solution isn't available in Address Book as default.
I know there are many scripts written for Address Book. Maybe there is something for this purpose?

How to share the same mask across multiple layers?

Say one needs multiple layers, one above another, to share the same layer mask. Is there any smart way to tell all those layers they have to use the same mask? As opposed to copying the same mask into all layers. The latter approach has the disadvantage that, when you need to change the mask, you need to copy it again into all layers that must share it.
Thank you.

Put the Layers in a Set and apply the mask to that.

How to use the same script for multiple buttons

Hi,
I've only just started using flash so any help would be great!
I'm creating a blockbusters type game, I have a grid of 20 buttons and I need them (individually) to turn blue on click and red on double click. I've managed to do it with the first one using this code;
var clicked:Boolean = false;
bn1.addEventListener(MouseEvent.CLICK, bn1click);
function bn1click(event:MouseEvent):void {
    clicked = true;
    var newColorTransform:ColorTransform = bn1.transform.colorTransform;
    if(clicked){
    newColorTransform.color = 0x064258;
    bn1.transform.colorTransform = newColorTransform;
bn1.doubleClickEnabled = true;
var doubleclicked:Boolean = false;
bn1.addEventListener(MouseEvent.DOUBLE_CLICK, bn1dclick);
function bn1dclick(event:MouseEvent):void {
    doubleclicked = true;
    var newColorTransform:ColorTransform = bn1.transform.colorTransform;
    if(clicked){
    newColorTransform.color = 0xac1e23;
    bn1.transform.colorTransform = newColorTransform;
Now I'm having trouble getting the same to work for the rest of the buttons, they are each named bn2, bn3 etc. They need to work individually and remain blue/red once clicked. I've tried listing them as addEventListener commands but not having a great deal of success!
Any help would be greatly appreciated, thanks!
Tomo

One way to do this is to use arrays to keep track of the buttons and their properties.
var buttonList:Array = new Array(bn1,bn2,bn3);
var clickedList:Array = new Array();
var doubleClickedList:Array = new Array();
//then use a for loop to assign the functions and properties for each button:
var thisMany:int = buttonList.length; // this will give you the number of items in the buttonList array
for(var i:int = 0; i<thisMany; i++) {
     buttonList[i].addEventListener(MouseEvent.CLICK,btnClick); // assign the click function to each button
     buttonList[i].addEventListener(MouseEvent.DOUBLE_CLICK,btnDClick); // assign the double click function
     clickedList.push(false); // add a false value for each button to this array
     doubleClickedList.push(false);
           buttonList[i].doubleClickEnabled = true; // set the double click property for each button
function btnClick(event:MouseEvent):void {
          var thisButton:int = buttonList.indexOf(event.target); // figure out which button was clicked as an item in the array
          clickedList[thisButton] = true; // change the value in the array
           var newColorTransform:ColorTransform = buttonList[thisButton].transform.colorTransform;
    if(clickedList[thisButton]){
    newColorTransform.color = 0x064258;
    buttonList[thisButton].transform.colorTransform = newColorTransform;
function btnDClick(event:MouseEvent):void {
          var thisButton:int = buttonList.indexOf(event.target);
          doubleClickedList[thisButton] = true;
    var newColorTransform:ColorTransform = buttonList[thisButton].transform.colorTransform;
    if(doubleClickedList[thisButton]){
    newColorTransform.color = 0xac1e23;
    buttonList[thisButton].transform.colorTransform = newColorTransform;
Now you can have any number of buttons, just add their instance names to the array at the top.

How to change the same cell in multiple tables at the same time

help if you can,
i have a workbook
workbook has 10 sheets
each sheet has 1 table
when in excel you were able to select a sheet then hold control and select another, this would group the sheet as if to make them the same. change a single cell in one of the sheets and this changed cell would be also be changed in all grouped sheets. is there the same functionality in numbers?

It's funny.
This question was asked several times in the last ten days.
The feature is unavailable.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'10
Yvan KOENIG (VALLAURIS, France) jeudi 8 octobre 2009 18:57:14

How to forward the same ports for multiple IPs?

Hi all, I just bought a Linksys WRT54GS router and I would like to forward the same set of ports for two different computers on my network (192.168.1.101 and 192.168.1.3) however when I try to, I get a "Port Overlap" error. Is there another way I can do this? I am trying to set up Age of Empires II. Thanks for any help!

No. You cannot forward the same port to two different computers (or IP addresses).
Here's the reason why:
You and your friend are both playing the game online. You score 1000 points. Your friend scores 10 points. The signal to increase your score 1000 points arrives on port 3078. Which computer is the router supposed to send this signal to? Both computers?   No way!
Most online games have a way to assign different ports to different computers. For example, you might use ports 3075 thru 3078, while your friend uses ports 3175 thru 3178. If your game is setup this way, it should work.
Also, you will want to forward ports to a fixed LAN IP address. In your WRT54GS, note that any fixed LAN IP address must be outside the DHCP server range, and it cannot end in 0, 1, or 255.   So the 192.168.1.101 address is probably an illegal fixed LAN IP address.
Here are all the Linksys rules for using fixed LAN IP addresses:
With Linksys routers, a fixed (static) LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the computer or printer, not in the router.
When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
Therefore any fixed LAN IP address would normally need to be in the range of
192.168.1.2 thru 192.168.1.99 or
192.168.1.150 thru 192.168.1.254
assuming you are still using the default DHCP server range.
Also, in the computer, when you set up a static LAN IP address, you would need to set the "Subnet mask" to 255.255.255.0 and the "Default Gateway" to 192.168.1.1 and "DNS server" to 192.168.1.1
It is also important that no two devices on your network be set to the same static LAN IP address.
Typically, when I setup gamers, I put thier fixed addresses all together at 192.168.1.21 , 192.168.1.22, etc.   But you can use any legal fixed addresses that you want.

How to run the same SSRS report multiple times, each time with a different parameter value?

Hi,
I have an SSRS report that produces a list of invoices for a single supplier (so supplier is a parameter specified at runtime). The report is based on a stored procedure in SQL. I would like to make things easier and instead of going through all suppliers
one by one, I want to have a single action, which produces separate reports, per supplier, for all suppliers that have an outstanding invoice (so not all suppliers on the system as a whole but all suppliers that are within the result set of the stored procedure).
I assume this would mean first executing the stored procedure to find all suppliers that have invoices at the time. And then running the report multiple times, once for each supplier, where the supplier value is used as the parameter every time. ideally
this would open separate webpages with a single report per page. (I am creating a button in another software, which is simply launching iexplore.exe and passing a
fixed SSRS report URL).
What would be required? I have SQL 2012 and I am building this in Report Builder 3.0.
Thank you!
Dimitar
P.S. What about still running ONE report, but every supplier starting on a new page? Is that more realistic? So supplier will not be a parameter any more, but just something that creates a new page on the report?

What
about still running ONE report, but every supplier starting on a new page? Is that more realistic? So supplier will not be a parameter any more, but just something that creates a new page on the report?
Yes thats a much better option. Its very easy to generate such a report in SSRS. You dont need a parameter
in that case but just needs to add Supplier as a grouping field in the tablix. Then add other columns and groups if required. Select option set page break after each instance of the group for first grouping (ie based on supplier field). Then report will render
with one page per supplier. On exporting to excel also each supplier data goes to a different tab
Here's a similar requirement I did for one of my projects
http://visakhm.blogspot.in/2013/10/using-ssrs-to-export-sqlserver-data-to.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Applying the same transition between multiple clips

Does any know how to apply the same transition to multiple clips that are all ready in the timeline? I remember attending an Adobe Premiere Workshop years ago and I'm sure they demonstrated that technique. It's would be such a time saver. Perhaps it was a Final Cut Workshop.

Don't you get something like this:
That works perfectly for me. Have you updated to CS4 4.1?

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Multiple instances of the same applet loaded causes problem

I have a java applet that has several classes in the project. The applet has a JTable a JButton and a JLabel control. The applet is displayed within an HTML page. The problem is that if a user opens the same html page more than once with the applet in it, only the last applet loaded receives the screen updates.
For example in one senario. I have an error message that displays in the Label control once they click on the button.
The user opens the html page and the applet is loaded (window 1). The user then opens the same html page again (window 2) with window 1 still open. If the user clicks on the Button in window 1, the error message is displayed in the window 2 applet.
Originally I had some static variables. Thinking it was being used globally by the JVM so I removed all of them and it still happens. I have tried using both the Applet and Object tag. But it still happens.
Has anyone experienced this before? Any suggestions on how to make the applet update the instance that recieved the events and not just the last one that was loaded?

You need to look at applet classloader issues. If applets have the same archive list and come from the same codebase, they have the same classloader. A class is namespaced by it's class + classloader. Any statics in a class with a classloader will be shared. If you instead make it such that your applets have unique classloaders (which you can't change for unsigned applets by yourself) by changing the codebase, that would be one solution.
For other solutions, I recommend searching the forum. This issue comes up a lot.

Problem:Multiple instances of the same applet on a webpage...

I have an applet which connects to a server to read an XML-file.
I use Doucument to parse the XML-file like this:
String xmlurl="http://www.somesite.com/somexmlpage.php";
Document d =DocumentBuilderFactory.newInstance().newDocumentBuilder().parse(xmlurl);
(...read the XML-file...)
This works fine.
However, I need multiple instances of the same applet running at the same time on the same webpage.
Now, with multiple applets running at the same time the parsing no loger works. If one applet is doing some parsing and a taskswitch takes place to let another applet run, the applet which is interrupted is not able to continue the parsing as it looses its "incoming data" when another applet reads from the server.
How can different applets affect each other like this?
And how can I fix the problem?
Thanks in advance for any help!!

However, I need multiple instances of the same applet running at the same time on the same webpage.
Why? But okay.Because the the different applets show information about different items.
Now, with multiple applets running at the same time the parsing no loger works. If one applet is doing some parsing and a
taskswitch takes place to let another applet run, the applet which is interrupted is not able to continue the
parsing as it looses its "incoming data" when another applet reads from the server.
How did you determine that's what's happening?By printing out debuginformation.
Each applet prints out a message (System.out.println) when it creates an instance of Document (ie. connects to the server) and the applet also prints out XML-information as the XML-file is processed.
But, actually, I was a bit quick in my first post; The applet doesen't neccesarily loose its "incoming data", but the parser looses the data it is parsing. I can download the data from the server first, and then start parsing it. If a taskswitch happens while one applet is parsing, it looses its data, even if the data is allready downloaded.
I see this since I see another applet making a printout, and when first applet starts again, the parser has lost track of its data.
It works fine if only one applet is running. And everything is fine until the next applets starts; I can see this from the printout.
Again, the appet prints out data as it parses the document. I see the next applet starting to work, and when the first one continues parsing again the printout shows that data is no longer there. It happens everytime the runtime switches to another applet, and it never happens if just one applet is running.
Googeling a little tells me that DocumentBuilder.parse() isn't thread-safe, but this shouldn't have anything to do with it, should it?
Each applet is a separate process, and not different threads in the same process, aren't they? (Not sure how the runtime treats multiple applets...)And secondly, the applets create their own instance of Document anyways.

How to open the same applet over multiple clients.

Similar Messages

Maybe you are looking for