How to pass a command into Telnet Play Script dynamically?

I'd like to pass a command into Telnet Play Script dynamically. Could I do it?
Thank you.

Jim,
I've attached a vi just to show how I send a command to my gateway using Telnet Write.vi. Actually this command changes speed on entered port of my gateway. Port number is changeable. I have question: could I send this command using Telnet Play Script.vi instead of Telnet Write.vi? If Yes - then How?
Tank you
Attachments:
script1.vi ‏10 KB

Similar Messages

How to Pass multiple parameter into single store procedure

How to Pass multiple parameter into single store procedure
like a one to many relationship.
it is possible then reply me immediatly

you mean like this .....
CREATE OR REPLACE procedure display_me(in_param in varchar2,in_default in varchar2 := 'Default') is
BEGIN
DBMS_OUTPUT.put_line ('Values is .....'||in_param || '....'||in_default);
END display_me;
CREATE OR REPLACE procedure display_me_2 as
cnt integer :=0;
BEGIN
For c1_rec In (SELECT empno,deptno FROM test_emp) Loop
     display_me(in_param => c1_rec.empno);
     cnt := cnt+1;
     end loop;
     DBMS_OUTPUT.put_line('Total record count is ....'||cnt);
END display_me_2;
SQL > exec display_me_2
Values is .....9999....Default
Values is .....4567....Default
Values is .....2345....Default
Values is .....7369....Default
Values is .....7499....Default
Values is .....7521....Default
Values is .....7566....Default
Values is .....7654....Default
Values is .....7698....Default
Values is .....7782....Default
Values is .....7788....Default
Values is .....7839....Default
Values is .....7844....Default
Values is .....7876....Default
Values is .....7900....Default
Values is .....7902....Default
Values is .....7934....Default
Values is .....1234....Default
Total record count is ....18

How to pass src value into img tag in ADF

Hi,
My Dev : 11.1.2.3.0
How to pass row values into <img> tag.,I used the below code but it's taking empty.,
I tried both ways like #{row.CdFilePath}   and   ${row.CdFilePath}
<af:iterator var="row"
                  value="#{bindings.xxx.collectionModel}"
                 id="i2">
     <img src='/ShowImage?src=#{row.CdFilePath}' border='0' style="width:100px; height:100px; margin:5px;"/>
</af:iterator>
Please tell me any other option is there..
Thanks

This works if you use a normal table so I guess it should work here too.
Are you sure the el #{row.CdFilePath} return something?
Why don't you use the adf image tag <af:image source="/ShowImage?src=#{row.CdFilePath}".../> instead of the html img tag?
Should the src property not be enclosed with " instead of your '?
Timo

How to add a report into the SAP-SCRIPT .using PERFORM ......ENDPERFORM

My question is that How to add a report into the SAP-SCRIPT .
by using PERFORM ......ENDPERFORM
I don't know how to used it .

Hi Sandeep,
Please check this link
http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
http://www.allinterview.com/showanswers/37425.html
Calling ABAP Subroutines: PERFORM
You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = u2018|u2019. "First page
ELSE.
OUT_PAR-VALUE = u2018||u2019. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Best regards,
raam

How to include a report into the SAP-SCRIPT

plz tell me
How to include a report into the SAP-SCRIPT
ASAP

creat a z report like this....................
REPORT zmmgl_picklist1.
TABLES : likp,ltap,ltak.
data : lv_NUM1 type c .
data : lv_NUM type c.
*&      Form get_data1
      text
     -->IN_DATA    text
     -->OUT_DATA   text
FORM get_data1 TABLES in_data STRUCTURE itcsy
                     out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAP-VBELN'.
lv_NUM = lv_NUM1 + 1.
out_data-name = 'lv_NUM'.
out_data-value = lv_NUM .
APPEND out_data.
endform.
*&      Form get_data
      This form is to read details from LIKP    *
     -->IN_DATA    text
     -->OUT_DATA   text
FORM get_data TABLES in_data STRUCTURE itcsy
                     out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single bldat from likp into likp-bldat where lgnum = ltap-lgnum.
out_data-name = 'LIKP-BLDAT'.
out_data-value = likp-bldat.
APPEND out_data.
   READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single vstel from likp into likp-vstel where lgnum = ltak-lgnum .
out_data-name = 'LIKP-VSTEL'.
out_data-value = likp-vstel.
APPEND out_data.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single kunnr from likp into likp-kunnr where lgnum = ltap-lgnum.
out_data-name = 'LIKP-KUNNR'.
out_data-value = likp-kunnr.
APPEND out_data.
ENDFORM.                    "get_data.
after this go to the script editor......
/: perform get_data in program zmmgl_picklist1.
/: using &ltap-vbeln&                 (Reference field.this field          should be there in both program and script.....)
/:changing &likp-bldat&
/:changing &likp-vstel&
/:changing &likp-kunnr&
\[removed by moderator\]
Regards
Anbu
Edited by: Jan Stallkamp on Jun 10, 2008 2:26 PM

How to pass a parameter into RMAN script

Hello,
I have the following rman script :
run {
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'c:\oracle\RmanORCL102\ora_df%t_s%s_s%p';
This script called configure.rman is launch by a .bat script with the following command:
rman target 'sys/sys12@ORCL102 as sysdba' @c:\oracle\RmanORCL102\configure.rman
How can I pass a parameter into rman script, I want to pass an additional directory like this:
rman target 'sys/sys12@ORCL102 as sysdba' @c:\oracle\RmanORCL102\configure.rman v_dir_name
And use it in rman script:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'c:\oracle\RmanORCL102\$v_dir_name\ora_df%t_s%s_s%p';
Is it a way to do this?
Regards,
Elodie

One option would be to create a file called backup.bat with the following:
echo run {
echo CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
echo CONFIGURE CONTROLFILE AUTOBACKUP OFF;
echo CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
echo CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'c:\oracle\RmanORCL102\%1\ora_df%t_s%s_s%p';
echo } ) | rman target sys/sys12@orcl102and then call the script as:
c:\> backup.bat backup_directory_name

How to pass 1D array into matlab?

1 had 2 1-D array
array1 = 1D array signed 32-bit integer numeric
array2 = 1D array double-precision floating-point numeric
how do i pass this 2 arrays to matlab script??
help....as i'm very new to both labview and matlab.
thks,lyn

LabVIEW has a Matlab Script Node (Programs >> Mathematics >> Formula) that you can use to interface between the two programs. To pass arrays into the script node do the following:
1. Right-click on the left edge and select "Add Input"
2. Give the input a variable name in the termainal that was created.
3. Right click on the terminal and select Choose Data Type >> Real Vector.
You can now wire the 1D array to this terminal. You enter your Matlab Commands as text inside the node and you can create outputs the same way to created inputs.

How to pass a variable into a cfc?

prior to calling the cfinvoke, I have coding that determins a
variable "X"
I need to pass X into a cfc so it can complete the query held
there.
So I tried
<cfinvoke component="A"
method="AList"
returnvariable="AResults">
<cfinvokeargument name="x" value="#X#"
/></cfinvoke>
correct so far?
Now over on the cfc page is where I'm getting stuck
Inside my cffunction I'm adding <cfargument name="X" />
But how do I get the value in?

I don't quite understand your question. Can you rephrase?
But before all that, bear in mind that one doesn't pass a
variables into a
*CFC*, one passes it into a function within the CFC. And as
with all
functions, one passes values into the function by passing it
as an
argument. But - of course - the function has to be coded to
expect the
argument.
Your own sample code demonstrates this in action:
<cfinvokeargument name="abbrCode"
value="#companyAbbrCode#" />
(NB: lose the trailing slash: this is CFML, not XML).
So you know how to do that.
Hence me not quite understanding what you're actually asking.
Adam

How to pass a file into a java method

I am trying to pass a file into a java method so I can read the file from inside the method. How can I do this? I am confident passing int, char, arrays etc into methods as I know how to identify them in a methods signature but I have no idea how to decalre a file in a mthods signature. Any ideas please ?
Thanks

Hi,
Just go thru the URL,
http://www6.software.ibm.com/devtools/news1001/art24.htm#toc2
I hope you will get a fair understanding of 'what is pass by reference/value'.
You can pass Object reference as an argument.
What Pablo Lucien had written is right. But the ideal situation is if you are not modifying the
file in the calling method, then you can pass the String (file name) as an argument to the called method.
Sudha

How to pass a command line argument to a jsp file...

Hi guys,
I'm writing a jsp file in which I have some java codes. I want to pass some command line arguments to that jsp file. In other words, I have some files located somewhere on my C drive and I want to pass the path to these files to my jsp file. How can it be done? I have never done before.
Any suggestion will be very hepful...
Thanks....

I dont know if I truly understand your problem...
For instance, when you place the url of your jsp you can add, at the end some parameters. For example:
http://myserver/myapp/myjsp.jsp?MyParameter=C:\Temp\JavaTutorial.html
In your JSP, you can place this code on a scriplet to get the value:
String path = request.getParameter("MyParameter");
Hope it helps.

How to pass a parameter into a sql expression?

How to pass a report parameter into a sql expression?

Hi Donald,
The functionality of using a parameter in a function is only available in the formula editor and not in SQL Expression. Parameters cannot be passed to the SQL Expression, the main purpose of the SQL Expression is to make use of Database functions to make calculations at the database level but the current functionality of the product only allows you to use Database fields.
There is an article that talks on SQL Expressions and can be useful http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2016184&sliceId=&dialogID=6018612&stateId=1%200%206020316
Regards,
Vinay

How to pass a command line argument to the sequence?

Hi,
My GUI is written in VB.NET. I can read the command line argument in the GUI, using: Me.AxApplicationMgr.CommandLineArguments(). But I don't know how to pass it on to my sequence file which the GUI invokes. How do I read the command line argument from the sequence file?
My purpose, is to have the same basic sequence execute different subsequences depending on starting conditions...
I am using TestStand 3.0 with a VB.NET GUI, on Windows XP.
I'd appreciate any help on the subject.
Alan

Hi Alan,
One obvious way would be to add parameter(s) to the MainSequence and then modify the process model sequence file to use the new parameter(s) in the step "MainSequence Callback" in either Single Pass or Test UUTs but I wouldn't recommend this approach.
The sequence file to be run via the entry point can be found at "RunState.ProcessModelClient" and the lookup string to the MainSequence would be "RunState.ProcessModelClient.Data.Seq["MainSequence"] or .Seq[0] .
Therefore you could quite easy use the SetVal method to setup a Local variable in the MainSequence of your Sequence File to receive the command line string.
Also you could do this without altering the Process Model Sequence File by using the Callback Sequence ProcessSetup in your Sequence File.
As an example.
You have a string in your Locals of MainSequence called CmdLineStr.
If you add the Callback Sequence ProcessSetup to your SequenceFile, then add an ActiveX Automation Adapter step which is setup for a PropertyObject and the reference is RunState.Caller.RunState.ProcessModel.Data.Seq[0].Locals.CmdLineStr.
There is an extra RunState.Caller to the lookup string, that's because I am doing the work in a SubSequence of Entry Point Sequence.
The method to use is SetValString and the parameters of the PropertyObject will be
lookupString = ""
options = 0 or 1
newValue = where evey you have stored you command line string.
Now when you run your sequence file you will find that the Locals.CmdLineStr will contain your parameter string.
Hope this is of help to you.
Regards
Ray Farmer
Regards
Ray Farmer

How to pass DOS command

I am trying to use Java to pass DOS command to command prompt. Can anyone give me some idea on how to do that?

Runtime.getRuntime().exec("docommand here");

How to pass table data into below code for alv

hi
i want to pass table data into alvgrid
i dont know how to pass table data.
here instead of passing ABC into internal table
i want to pass table data .
please help me
ialv-test1 = 'ABC'.
form get_data.
ialv-test1 = 'ABC'.
ialv-test2 = 'DEF'.
append ialv.
ialv-test1 = 'GHI'.
ialv-test2 = 'JKL'.
append ialv.
ialv-test1 = '123'.
ialv-test2 = '456'.
append ialv.
endform
thanks in advanced.

Have a look at below links. It gives you sample code of alv grid.
http://sap.niraj.tripod.com/id64.html
http://www.sap-img.com/abap/sample-programs-on-alv-grid.htm
Have a look at below links for SAP Help.
http://help.sap.com/saphelp_nw04/helpdata/en/8d/e994374c9cd355e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/12/904f42d5f811d2b469006094192fe3/content.htm
Best Regards,
Vibha
*Please mark all the helpful answers

How to pass a parameter into execute sql task and later use it into dataflow task?

i am in a situation, where i have a logging table in which i have a primary key called ETL_log_ID which is an identity column and acts as a foreign key for various fact table and dimension tables which are populated using SSIS packages. Now i wanna use the
ETL_log_ID as a parameter in the execute sql task which populates the log table and pass the same value in the data flow task which populates the facts and dimension. Can you let me know how to pass the parameter in a step by step procedure.
Thanks,
Nikhil

Nikhil,
You can check the following :
http://www.programmersedge.com/post/2013/03/05/ssis-execute-sql-task-mapping-parameters-and-result-sets.aspx
http://stackoverflow.com/questions/7610491/how-to-pass-variable-as-a-parameter-in-execute-sql-task-ssis
Regarding the usage in Dataflow task, Can you elaborate on that a little?
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

How to pass a command into Telnet Play Script dynamically?

Similar Messages

Maybe you are looking for