How to pass a parameter into a sql expression?

How to pass a report parameter into a sql expression?

Hi Donald,
The functionality of using a parameter in a function is only available in the formula editor and not in SQL Expression. Parameters cannot be passed to the SQL Expression, the main purpose of the SQL Expression is to make use of Database functions to make calculations at the database level but the current functionality of the product only allows you to use Database fields.
There is an article that talks on SQL Expressions and can be useful http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2016184&sliceId=&dialogID=6018612&stateId=1%200%206020316
Regards,
Vinay

Similar Messages

How to pass a parameter into execute sql task and later use it into dataflow task?

i am in a situation, where i have a logging table in which i have a primary key called ETL_log_ID which is an identity column and acts as a foreign key for various fact table and dimension tables which are populated using SSIS packages. Now i wanna use the
ETL_log_ID as a parameter in the execute sql task which populates the log table and pass the same value in the data flow task which populates the facts and dimension. Can you let me know how to pass the parameter in a step by step procedure.
Thanks,
Nikhil

Nikhil,
You can check the following :
http://www.programmersedge.com/post/2013/03/05/ssis-execute-sql-task-mapping-parameters-and-result-sets.aspx
http://stackoverflow.com/questions/7610491/how-to-pass-variable-as-a-parameter-in-execute-sql-task-ssis
Regarding the usage in Dataflow task, Can you elaborate on that a little?
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

How to Pass multiple parameter into single store procedure

How to Pass multiple parameter into single store procedure
like a one to many relationship.
it is possible then reply me immediatly

you mean like this .....
CREATE OR REPLACE procedure display_me(in_param in varchar2,in_default in varchar2 := 'Default') is
BEGIN
DBMS_OUTPUT.put_line ('Values is .....'||in_param || '....'||in_default);
END display_me;
CREATE OR REPLACE procedure display_me_2 as
cnt integer :=0;
BEGIN
For c1_rec In (SELECT empno,deptno FROM test_emp) Loop
     display_me(in_param => c1_rec.empno);
     cnt := cnt+1;
     end loop;
     DBMS_OUTPUT.put_line('Total record count is ....'||cnt);
END display_me_2;
SQL > exec display_me_2
Values is .....9999....Default
Values is .....4567....Default
Values is .....2345....Default
Values is .....7369....Default
Values is .....7499....Default
Values is .....7521....Default
Values is .....7566....Default
Values is .....7654....Default
Values is .....7698....Default
Values is .....7782....Default
Values is .....7788....Default
Values is .....7839....Default
Values is .....7844....Default
Values is .....7876....Default
Values is .....7900....Default
Values is .....7902....Default
Values is .....7934....Default
Values is .....1234....Default
Total record count is ....18

How to pass a parameter into RMAN script

Hello,
I have the following rman script :
run {
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'c:\oracle\RmanORCL102\ora_df%t_s%s_s%p';
This script called configure.rman is launch by a .bat script with the following command:
rman target 'sys/sys12@ORCL102 as sysdba' @c:\oracle\RmanORCL102\configure.rman
How can I pass a parameter into rman script, I want to pass an additional directory like this:
rman target 'sys/sys12@ORCL102 as sysdba' @c:\oracle\RmanORCL102\configure.rman v_dir_name
And use it in rman script:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'c:\oracle\RmanORCL102\$v_dir_name\ora_df%t_s%s_s%p';
Is it a way to do this?
Regards,
Elodie

One option would be to create a file called backup.bat with the following:
echo run {
echo CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
echo CONFIGURE CONTROLFILE AUTOBACKUP OFF;
echo CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
echo CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'c:\oracle\RmanORCL102\%1\ora_df%t_s%s_s%p';
echo } ) | rman target sys/sys12@orcl102and then call the script as:
c:\> backup.bat backup_directory_name

How to pass a parameter into a select statement using a bulk collect

Using a cursors I can use execute immediate to pass a parameter to specify a table name.
I have modified the procedure not to use the cursor. I am using a collection using a bulk insert into a nested table. How can I specify the table the table name as a parameter without using the execute immediate statement.
Thank you

Hi Donald,
The functionality of using a parameter in a function is only available in the formula editor and not in SQL Expression. Parameters cannot be passed to the SQL Expression, the main purpose of the SQL Expression is to make use of Database functions to make calculations at the database level but the current functionality of the product only allows you to use Database fields.
There is an article that talks on SQL Expressions and can be useful http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2016184&sliceId=&dialogID=6018612&stateId=1%200%206020316
Regards,
Vinay

Passing user parameter into your sql query

I've created two user parameters...'Order_date_from' and 'Order_date_to'
I've written a simple query to list the total order amount, order number, party name and ordered date
Select sum ((unit_selling_price)*(ordered_quantity)), count(line_number), oe_order_headers_all.order_number, hz_parties.party_name, oe_order_headers_all.ordered_date
from oe_order_lines_all,
oe_order_headers_all,
hz_parties,
hz_cust_accounts
where oe_order_lines_all.header_id=oe_order_headers_all.header_id
and oe_order_headers_all.sold_to_org_id = hz_cust_accounts.cust_account_id
and hz_cust_accounts.party_id = hz_parties.party_id
group by order_number, party_name, ordered_date;
I want to know how I can pass the value for the above mentioned parameters into my sql query so that it reflects as the 'ordered_date' in the report and only shows the data for the dates that the user inputs.
Any feedback would be appreciated. Thanks.

I want to know how I can pass the value for the above
mentioned parameters into my sql query so that it
reflects as the 'ordered_date' in the report and only
shows the data for the dates that the user inputs.
Any feedback would be appreciated. Thanks.And how does the "user" input these dates?

HOW to pass page parameter into table function in HTMLDB

I created this object and table function in database.
create or replace TYPE date_flow_type
AS OBJECT (
time           date,
max_time      number,
avg_total           NUMBER,
sum_total      NUMBER,
max_total      NUMBER,
change_rate      number
create or replace TYPE date_flow_table_type AS TABLE OF date_flow_type;
create or replace function ret_date(p_date date default sysdate) return date_flow_table_type is
v_tbl1 date_flow_table_type :=date_flow_table_type();
begin
v_tbl1.extend;
v_tbl1(v_tbl1.last):=date_flow_type (p_date,1,1,1,1,1);
return v_tbl1;
end;
and it is correct in htmldb when using in these ways
SELECT TIME da,
     max_time max_time,
     sum_total total,
     max_total max_total,
change_rate
FROM TABLE ( ret_icp_date_flow ) a;
SELECT TIME da,
     max_time max_time,
     sum_total total,
     max_total max_total,
change_rate
FROM TABLE ( ret_icp_date_flow( sysdate-1 )) a;
but return error
ORA-00904: "RET_ICP_DATE_FLOW": 无效的标识符
when pasing page parameter into the table function
SELECT TIME da,
max_time max_time,
sum_total total,
max_total max_total,
change_rate
FROM TABLE ( ret_icp_date_flow( to_date(:p1_date,'yyyy-mm-dd') )) a
and this sql is correct while running in sqlplus .

Hi!
Thanks for your reply!
I have tried this solution but it doesn't work!
When I do getInitParameter in the init function, the servlet take the default values...
Maybe I have wrote something wrong?
Excuse me for my english,
Thanks

How to pass a value into a SQL Query?

Hi There,
I want to know if there is a possibility to pass a dynamic value in a sql query. For example I have a currency rate value (ex: rate = 1.319, 2.23 etc) which user wants to input when running the query (The rate is not taken from the system, so I cannot compare to any table column and pass it as a parameter).
And this rate has to be used in my query to do some calculation. Is this possible? The value :p_currency_rate doesn't work
Any ideas please?
Thank you,
Prathibha

SELECT DISTINCT
hou.name
,poh.segment1 po_num
,pol.line_num po_line_num
,poh.currency_code
--,trunc(poh.creation_date) po_creation_date
,pol.cancel_flag
,msi.segment1 item_num
,pol.unit_price
,round(cost.item_cost,5)
,round((&p_rate * pol.unit_price),5) "CONVERSION"
,(cost.item_cost - round((&p_rate * pol.unit_price),5)) difference
,pov.vendor_name
FROM
po.po_headers_all poh
,po.po_lines_all pol
,po.po_vendors pov
,hr.hr_all_organization_units hou
,inv.mtl_system_items_b msi
,bom.cst_item_costs cost
WHERE
poh.po_header_id = pol.po_header_id
and pov.vendor_id = poh.vendor_id
and poh.org_id = hou.organization_id
and hou.organization_id = :p_operating_unit
and poh.currency_code = :p_currency
and poh.creation_date between :po_creation_date_from and :po_creation_date_to
and poh.type_lookup_code = 'BLANKET'
and msi.inventory_item_id = pol.item_id
and cost.INVENTORY_ITEM_ID = pol.ITEM_ID
--and (cost.item_cost - pol.unit_price) <> 0
and (cost.item_cost - round((&p_rate * pol.unit_price),5)) <> 0
and cost.organization_id = 1
and msi.organization_id = 1
and cost.cost_type_id = 3 --- Pending cost type
and nvl(upper (pol.closed_code),'OPEN') not in('CANCELLED', 'CLOSED', 'FINALLY CLOSED', 'REJECTED')
and nvl(upper (poh.closed_code),'OPEN') not in('CANCELLED', 'CLOSED', 'FINALLY CLOSED', 'REJECTED')
and nvl(pol.cancel_flag, 'N') = 'N'
and &p_rate user parameter
I want this p_rate to be passed as a user parameter.

How do I Pass a parameter to a SQL Component Task where the source SQL statement is also a variable

Hi,
I have been tasked with making a complex package more generic.
To achieve this I need to pass a parameter to a SQL Component Task where the source SQL statement is also a variable.
So to help articulate my question further I have create a package and database as follows; -
USE [KWPlay]
GO
/****** Object: Table [dbo].[tblTest] Script Date: 05/14/2014 17:08:02 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[tblTest](
[ID] [bigint] IDENTITY(1,1) NOT NULL,
[Description] [nvarchar](50) NULL,
CONSTRAINT [PK_tblTest] PRIMARY KEY CLUSTERED
[ID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
I populated this table with a single record.
I unit tested the SQL within SSMS as follows;
SELECT * FROM dbo.tblTest
Result; -
ID
Description
1
Happy
DECLARE @myParam NVARCHAR(100)
SET @myParam = 'Sad'
UPDATE dbo.tblTest SET [Description] = @myParam FROM dbo.tblTest WHERE ID = 1
SELECT * FROM dbo.tblTest
Result; -
ID
Description
1
Sad
Within the package I created two variables as follows; -
Name: strSQL
Scope: Package
Data Type: String
Value: UPDATE dbo.tblTest SET [Description] = @myParam FROM dbo.tblTest WHERE ID = 1
Name: strStatus
Scope: Package
Data Type: String
Value: Happy
I then created a single ‘Execute SQL Task’ component within the control flow as follows; -
However when I run the above package I get the following error; -
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "UPDATE dbo.tblTest SET [Description] = @myParam FR..." failed with the following error:
"Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
Warning: 0x80019002 at Package: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED.
The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the
errors.
SSIS package "Package.dtsx" finished: Failure.
I also tried; -
Name: strSQL
Scope: Package
Data Type: String
Value: UPDATE dbo.tblTest SET [Description] = ? FROM dbo.tblTest WHERE ID = 1
However I received the error; -
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "UPDATE dbo.tblTest SET [Description] = ? FROM dbo...." failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with
the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
Warning: 0x80019002 at Package: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Tried; -
Name: strSQL
Scope: Package
Data Type: String
Value: UPDATE dbo.tblTest SET [Description] = ? FROM dbo.tblTest WHERE ID = 1
and; -
Result; -
SSIS package "Package.dtsx" starting.
SSIS package "Package.dtsx" finished: Success.
Therefore the answer was to put the parameter number rather than the parameter name under the parameter mapping tab-> parameter name column.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Passing Time Parameter to a SQL Script

I am trying to create an SSIS package that will extract data from a non BPC database to load into BPC. I am calling the package from DM prompting for the time parameter. However,   I am having problems passing the parameter to the SQL script. I am using OLEDB Data source task using the SQL command - Using the following scrip where the '?'' is the prompt for the BPC time parameter. Any suggestions on how to resolve would be greatly appreciated.
SELECT
         CASE
                  WHEN LEN(GLAccountNumber)=10
                  THEN LEFT(GLAccountNumber,6)
                  ELSE GLAccountNumber
         END                                                   AS ACCOUNT     ,
         'F_CLO'                                               AS ACCTDETAIL ,
         'ACTUAL'                                              AS CATEGORY    ,
         RTRIM(CompanyCode)                             AS COMPANY     ,
         RTRIM(CompanyDepartment)                              AS COSTCENTER ,
         'FM'                                                  AS DATASRC     ,
         'NON_INTERCO'                                         AS INTERCO     ,
         'NOMAT'                                               AS MATERIALS   ,
         'NOPC'                                                AS PROFITCTR   ,
         'LC'                                                  AS RPTCURRENCY ,
         CAST(YearNumber AS CHAR(4)) + '.' + MonthAbbreviation AS [TIME]      ,
         SUM(TransactionAmount)                                AS SIGNEDDAA
FROM     dbo.GLTransactionDimension a WITH (nolock)
         JOIN dbo.GLTransactionFacts b WITH (nolock)
         ON       a.GLTransactionDimensionKey = b.GLTransactionDimensionKey
         JOIN dbo.DateDimension c WITH (nolock)
         ON       b.EntryDateDimensionKey = c.DateDimensionKey
WHERE    EntryDateDimensionKey         LIKE
          CASE
                  WHEN RIGHT(?,3)='APR' THEN '200904%'
                  WHEN RIGHT(?,3)='MAY' THEN '200905%'
           END
         AND      RowType = 'T'
GROUP BY CompanyCode ,
         DepartmentCode     ,
         CompanyDepartment ,
         GLAccountNumber    ,
         YearNumber         ,
         MonthAbbreviation
ORDER BY CompanyCode ,
         DepartmentCode     ,
         GLAccountNumber    ,
         YearNumber         ,
         MonthAbbreviation

Hi Steven,
Use SQL task without parameter
Into DM package into Modify script Build a variable where you will build the entire sql string and of course you will be able to pass also the variable.
After that you will call into Modify scrip something like:
TASK( Yourtask, SQL, "the entire SQL with parameter")
Regards
Sorin

How to pass the parameter of a stored procedure to iReport

Hi... i don't know how to pass the parameter of the stored procedure to the iReport.
In the Report Query, i tried
1. sp_storedprocedure ' value'
2. sp_storedprocedure +''''+$P{parameter}+''''+
3. sp_storedprocedure +$V+$P{parameter}++$F($F is a variable having a value of ' (a single quote))may you enlighten us please? thank you

For M$ SQL server I find that it only works when U use the fully qualified name...
e.g. catalod.dbo.my_procedure_name 'variable'
My full query in the Report Query window is something like this:
EXEC arc.dbo.jasper_Invoice 1000
Note that you may find that selecting from VIEWS / TABLES fails for no apparent reason and iReport will prompt you with the usual very unhelpful (we have what we "pay" for) prompt, stating that "The document is empty".
To work around this issue, where a statement like "SELECT * FROM arc.dbo.acc_invoices WHERE Invoice_id=1000" does not work, simply create a PROC, something like:
CREATE PROC jasper_MyProc (@my_rec_id integer) AS
SELECT * FROM arc.dbo.acc_invoices WHERE Invoice_id= @my_rec_id integer
...to wrap your SELECT statement, then call the PROC
Edited by: Sylinsr on Apr 22, 2008 4:23 PM

How to pass dynamic parameter to a database function in OBIEE

Hi,
I have a requirement like this. I have to create one report in OBIEE which was in Discoverer. Now in discoverer report there are some calculated item in the worksheet based on database pkg.functions. The parameter which user gives at run time that parameters are then passed to the discoverer calculated items dynamically. But I am not able to do this in OBIEE answers.
Can anyone tell me step by step how I can able to pass the user selected parameter values in OBIEE answer level.
The example:
GET_COMM_VALUE_PTD("AFE Cost & Commitment".Afe Id,:"Period Name(AFE)","AFE Cost & Commitment".Data Sel,"AFE Cost & Commitment".Org Id)
GET_COMM_VALUE_PTD --- Function database
("AFE Cost & Commitment".Afe Id,:"Period Name(AFE)","AFE Cost & Commitment".Data Sel,"AFE Cost & Commitment".Org Id --- Parameters... :"Period Name(AFE)" is the dynamic parameter selected run time by user.
Please help.
Thanks
Titas

Hi,
I already did that. But the existing discoverer re value report is showing correct value but the OBIEE report with EVALUATE function shows incorrect value.
The requirement is to create a OBIEE Dashboard from a Discoverer existing report. Now in discoverer report theere are several calculated items in worksheet level where database custom function is used and user selected parameter value is passed run time in that function. But when that is created in OBIEE with EVALUATE function in RPD, the report shows incorrect data. Could not understand how to pass the parameter value runtime.
Below is the discoverer 'Show SQL' query and EVALUATE function syntax which has been used.
SELECT APPS.XXBG_PL_PROJ_ANALYSIS_AFE_PKG.GET_COMM_VALUE_PTD(XXBG_PL_PROJ_AFE_V.AFE_ID,
:"Period Name(AFE)",
XXBG_PL_PROJ_AFE_V.DATA_SEL,
XXBG_PL_PROJ_AFE_V.ORG_ID),
XXBG_PL_PROJ_AFE_V.AFE_DESC,
XXBG_PL_PROJ_AFE_V.AFE_NUMBER,
XXBG_PL_PROJ_AFE_V.APPROVED_AFE_AMOUNT
FROM APPS.PA_PERIODS_ALL PA_PERIODS_ALL,
APPS.XXBG_PL_PROJ_AFE_V XXBG_PL_PROJ_AFE_V
WHERE ((XXBG_PL_PROJ_AFE_V.ORG_ID = PA_PERIODS_ALL.ORG_ID))
AND (XXBG_PL_PROJ_AFE_V.DATA_SEL = :"Data Selection(AFE)")
AND (PA_PERIODS_ALL.PERIOD_NAME = :"Period Name(AFE)")
AND (XXBG_PL_PROJ_AFE_V.AFE_NUMBER = :"AFE Number(AFE)")
AND (XXBG_PL_PROJ_AFE_V.OPERATING_UNIT = :"Operating Unit(AFE)")
The EVALUATE function syntax is as below:
EVALUATE('XXBG_PL_PROJ_ANALYSIS_AFE_PKG.GET_COMM_VALUE_PTD(%1,%2,%3,%4)' AS FLOAT , "BG PL Project Analysis Report_1"."AFE Cost & Commitment"."AFE Cost & Commitment.Afe Id", "BG PL Project Analysis Report_1"."Periods 1"."Periods 1.Period Name", "BG PL Project Analysis Report_1"."AFE Cost & Commitment"."AFE Cost & Commitment.Data Sel", "BG PL Project Analysis Report_1"."AFE Cost & Commitment"."AFE Cost & Commitment.Org Id")
The PERIOD needs to be passed at run time which user will select.
Please help to solve the issue.

How to pass IN parameter as BOOLEAN for concurrent program in Apps(Environ)

hi all
i am using a standard package procedure,where in which i need to pass some parameters to a procedure,
some of the parameters there are BOOLEAN type ,can anybody help me to know , How to pass IN parameter as BOOLEAN for concurrent program in Apps(Environ)

Already answered this on the SQL forum (How to give IN parameter as BOOLEAN in a concurrent program.

Passing a list into a sql procedure via a unix shell.

9.2.0.6
for some dumb reason we cannot use java to do this task.
anyways
I need to build a list of all file in a particular directory. The list could be zero to very very long. I would like to be able to pass that list to a PL/SQL procedure.
this is in unix
I think I could do something like
var=f1,f2,f3,f4
sqlplus blah/blah $var
exec my_proc(&var);
I guess that would handle up to 32k in length. It would be up to me to parse the list.
I am really looking for an way to do this a bit slicker.. like with a ref cursor but I seem to be getting stuck.
Thanks

Some examples here :
Re: How to pass Character parameter
Nicolas.

How to pass Cascading Parameter in SSRS using Java

How to pass Cascading Parameter in SSRS using Java---
We are having a problem with dependent parameters.There are three drop down--
1.first dropdown is of Country.When we select a country--Accordingly next dropdown(State)will populate
2.Second dropdown is of State. When we select a state--Accordingly next dropdown(City)will populate.
I have three data sources are
CountryList-
SELECT CountryRegionCode, Name
FROM Person.CountryRegion
ORDER BY Name
StateList
SELECT StateProvinceID, StateProvinceCode, CountryRegionCode
FROM Person.StateProvince
WHERE CountryRegionCode = @CountryRegionCode
ORDER BY StateProvinceCode
CityList
SELECT StateProvinceID, City
FROM Person.Address
GROUP BY StateProvinceID, City
HAVING (StateProvinceID = @StateProvinceID)
ORDER BY City
Ihave to show report that has been deployed on server on the besis of these parameters
I am using ReportViewer in JSP Page through url--
http://192.168.90.149/ReportServer/Pages/ReportViewer.aspx?%2fReport+Project1%2fCascading_Parameters&rs:Command=Render&rs:parameter=true&Country="+Country+"&State="+State;
But it is not accepting parameter if they are cascaded.It is working fine if Both parameters are independent.
Edited by: kaushlee on May 11, 2010 9:22 PM

Take a look at set_custom_property:
public static final ID SETTEXT = ID.registerProperty("SETTEXT");
public boolean setProperty(ID pid, Object value)
if (pid == SETTEXT)
String text = value.toString();
and in forms
set_custom_property('beans.bean_item', 1, 'SETTEXT', 'some text');
cheers

How to pass a parameter into a sql expression?

Similar Messages

Maybe you are looking for