How to pass more than 10 parameters to OnDemand process?

If have created some application items to use as parameters.
When I do in my javascript
get.addParam('F_PAR_REPORT',pReport);
and I use this parameter in onDemand process as :F_PAR_REPORT , I get
The requested URL /pls/apex/<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"><HTML><HEAD><TITLE>404 Not Found</TITLE></HEAD><BODY><H1>Not Found</H1>The requested URL /pls/apex/wwv_flow.show was not found on this server.<P><HR><ADDRESS>Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at kor.ofisa.ch Port 7777</ADDRESS></BODY></HTML> was not found on this server.
If I use x01 - x10, with iwwv_flow.g_x01, it works, but I need to pass more that 10 parameters.
Can anyone give me correct syntax? I remember that before v3, there was a possibility, but I don't remember what it was.
Igor

Hi Igor
I'd recommend that you try the following, as this is how I work around the problem:
Put your items and values into two delimited strings (use javascript arrays and the join function to simplify the process) and set g_x01 for the items and g_x02 for the values, ensuring each named item has a value and vice versa. On thr processing side use the apex_util.string_to_table function and process them, i.e. set session state etc.
Hope that helps!
Cheers
Matt

Similar Messages

How to pass more than one parameter

Hello,
This is my code.
How to pass more than one parameter:
SELECT:responsibility_name responsibility_name,
LPAD(' ', 6*(LEVEL-1))
|| menu_entry.entry_sequence sequence ,
LPAD(' ', 6*(LEVEL-1))
|| menu.user_menu_name SubMenu_Description ,
LPAD(' ', 6*(LEVEL-1))
|| func.user_function_name Function_Description ,
LPAD(' ', 6*(LEVEL-1))
|| menu_entry.prompt prompt
,menu.menu_id ,
func.function_id
--menu_entry.grant_flag Grant_Flag ,
--DECODE( menu_entry.sub_menu_id , NULL, 'FUNCTION' , DECODE( menu_entry.function_id , NULL, 'SUBMENU' , 'BOTH') ) Type
FROM fnd_menu_entries_vl menu_entry ,
fnd_menus_tl menu ,
fnd_form_functions_tl func
WHERE menu_entry.sub_menu_id    = menu.menu_id(+)
AND menu_entry.function_id      = func.function_id(+)
AND MENU.LANGUAGE(+) = 'US'
AND FUNC.LANGUAGE(+) = 'US'
--AND func.user_function_name LIKE '%Primary Care Providers%'
AND grant_flag                  = 'Y'
START WITH menu_entry.menu_id =
(SELECT menu2.menu_id
FROM fnd_menus_tl menu2,apps.fnd_responsibility_vl resp
WHERE menu2.menu_id=resp.menu_id
and resp.responsibility_name= :responsibility_name
--and menu2.user_menu_name = ('ATCO HR INQ USER'
AND LANGUAGE = 'US'
CONNECT BY MENU_ENTRY.MENU_ID = PRIOR MENU_ENTRY.SUB_MENU_ID
   and menu_entry.function_id not in (select func.function_id
                                   from --fnd_form_functions_vl fnc,
                                   apps.fnd_resp_functions exc,
                                   apps.fnd_responsibility_vl res
                                  where func.function_id = exc.action_id
                                  and res.responsibility_name =:responsibility_name
                                  and res.responsibility_id=exc.responsibility_id)
and menu_entry.sub_menu_id not in (select menu.menu_id
                                   from --fnd_menus_vl imn,
                                   apps.fnd_resp_functions exc,
                                   apps.fnd_responsibility_vl res
                                   where menu.menu_id = exc.action_id
                                   and res.responsibility_name =:responsibility_name
                                  and res.responsibility_id=exc.responsibility_id)
ORDER SIBLINGS BY menu_entry.entry_sequence;
Thank you for your help
Shuishenming

Hi, Ming,
One way is to put the "parameters" in a table, and join to that table in your query. If you make it a Global Temporary Table, then multiple sessions can run the query at the same time, and each can be seeing different responsibilities.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data. Since this problem involves parameters, you should give a couple of different sets of parameters, and the results you want from the same sample data for each set.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How to pass more than one value for one column in procedure

hi
select id, name from col_tab where dept_name in ('ECE','CIVIL');
when i was running this it is working well.
CREATE OR REPLACE PACKAGE pack_str
AS
TYPE type_refcur IS REF CURSOR;
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
IS
BEGIN
OPEN ans FOR
select id,name from col_tab where dept_name in char_in ;
END str;
END pack_str;
the package was created.
my doubt is
1.how to pass more than one value for char_in (e.g ('ECE','CIVIL'))
2. when i was storing the value in string like val = 'ECE,CIVIL' ,
how to get the id,name for ECE and CIVIL.
plz help me

Hi Rebekh ,
I am recreating your packages for the desired output.
CREATE OR REPLACE PACKAGE pack_str
AS
     TYPE type_refcur IS REF CURSOR;
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
     IS
          lv_t varchar2(200);
     BEGIN
          lv_t := REPLACE(char_in,',',''',''');
          lv_t := 'select id,name from col_tab where dept_name in (''' || lv_t || ''')' ;
          OPEN ans FOR lv_t;
     END str;
END pack_str;
Note:-
Input Parameter char_in is a comma seperated value for dept_name
-Debamalya

How to pass more than 3 Items in link of report attribute?

I have a report with edit link.
After user click link, then go to next page. I want to pass more than 3 items in this link, item 1 name=xxx and value=#xxx#.
How can I do this?
Thanks.

Why wouldn't you pass item values through links...is it not why they were created?1. Item values may contain characters that are not URL safe in general ('#') or in APEX (':'), causing the link to fail.
2. Recognisable item values that are visible in the URL are a security issue, and invite URL tampering that in a poorly designed and implemented system may allow unauthorised access to data.
3. There are limits on the length of URL APEX, user agents and servers are capable of handling.
4. Lots of long URLs in links drives up page weight and bandwidth usage.
5. General housekeeping problems and maintainenance issues: think about going backwards and forwards in single-row APEX URL text item showing 60 chars when making changes to a 2000-character URL.
Best practice when passing parameters through a URL is to use as few as possible: preferably single, unique, "meaningless" sequence- or sys_guid-generated references.

How to pass more than one value to the procedure

How can I pass more than one letting date to this procedure. If it is only one letting date, I do not have a problem but when it is more than one letting date at the same time then I am stuck. please help
example I would like to pass this three letting dates : '01/17/2010', '01/27/2010','05/22/2010'
CEATE OR REPLACE PROCEDURE TPLCP.PLANHOLDERSLIST
P_LettingDate IN VARCHAR2,
p_results OUT sys_refcursor
AS
BEGIN
    OPEN p_results FOR
SELECT DISTINCT DECODE (TRIM (MIN (j.route)), NULL, 'N/A',TRIM (MIN (j.route))) rt,l.lcontid conid,
                 SUBSTR (q.cprojnum, 1, 10) pr, SUBSTR (l.letting, 3, 2)|| '-'|| SUBSTR (l.letting, 5, 2)|| '-'|| SUBSTR (l.letting, 1, 2) lt,
                (q.cdescr) jbtyp, INITCAP (q.clocat1 || q.clocat2) loc
           FROM vendor v,
                vendaddr r,
                letprop l,
                planhold p,
                proposal q,
                project j,
                propproj k,
                bidlet bd
          WHERE v.vendor = r.vendor
            AND k.contid = q.contid
            AND k.pcn = j.pcn
            AND l.lcontid = k.contid
            AND p.vendor = v.vendor
            AND l.letting = p.letting
            AND TO_CHAR (bd.datelet, 'MM/DD/YYYY') IN P_LettingDate
            AND l.CALL = p.CALL
            AND r.addrnum = p.billto
            AND bd.letting = l.letting
       GROUP BY v.vendor,
                r.addrnum,
                v.vnamel,
                r.aaddr1,
                p.billto,
                r.acity,
                r.astate,
                q.cdescr,
                q.clocat1,
                q.clocat2,
                bd.letting,
                r.azipcode,
                r.vasst1,
                r.aphone,
                l.letting,
                l.lcontid,
                q.cprojnum;
END PLANHOLDERSLIST;

you can create your on array type and then pass that as the parameter. I use the suffix of ttyp to represent a table type. The name of the column when using the table() syntax is columnvalue.
I altered my session to set the default date format to match your format. you could have used the to_date function to set the values for the arr type.
Hope this helps.
create type msw_ttyp as table of date
create or replace
procedure msw_test(p_arr     in msw_ttyp) as
v     integer;
begin
select count(*)
   into v
   from table(p_arr);
dbms_output.put_line('count: '||v);
for rec in (select column_value
               from table(p_arr))
loop
dbms_output.put_line(rec.column_value);
end loop;
end msw_test;
alter session set nls_date_format = 'MM/DD/YYYY';
set serveroutput on size 1000000
exec msw_test(msw_ttyp('01/17/2010', '01/27/2010','05/22/2010'));
begin
msw_test(msw_ttyp(to_date('01/17/2010', 'MM/DD/YYYY'),
                   to_date('01/27/2010', 'MM/DD/YYYY'),
                   to_date('05/22/2010', 'MM/DD/YYYY')));
end;
/

How to pass more than one parameter using common...

Hi,
I am using ODP.NET with my 2005 VB
I want to create function from where I can pass more than one parameter to execute SP, or query just like i created for SQL SERVER as below
Public shared Function CreateParameter(ByVal paramname As String, ByVal paramvalue As Object) As DbParameter
Dim param As DbParameter
param = New SqlParameter
param.ParameterName = paramname
param.Value = paramvalue
Return param
End Function
Public Shared Function ExecuteQuery(ByVal sql As String, ByVal commtype As CommandType, ByVal ParamArray parameter As DbParameter())
Dim cmd As DbCommand = New SqlCommand()
cmd.Connection = OpenConnection()
cmd.CommandType = commtype
cmd.CommandText = sql
cmd.Parameters.AddRange(parameter)
Dim RetVal As Integer = cmd.ExecuteNonQuery()
Return RetVal
End Function
specially part is in bold to be converted
I tried like but oracleCommand.parameters doesnt support AddRange
please help me out
Regards

Hello,
I used the following way:
pCommand.CommandText = "Update " + sDataTable + " set "
+ sColumnName + " = :1 ";
pCommand.Parameters.Add("ValueToDb",
this.DefaultDbType,
this.m_Value,
System.Data.ParameterDirection.Input);
Of course, you can add :2,... to your command text, too.
The way back is:
sEndOfTheClause += " RETURNING " + sDataTable + "." + sColName + " INTO :iNewValue";
pCommand.CommandText = ... + sEndOfTheClause;
pCommand.Parameters.Add("iNewValue", this.DefaultDbType,
ParameterDirection.Output);
bool bReturn = (pCommand.ExecuteNonQuery() != 0);
if ((bReturn == true) && (pCommand.Parameters.Count > 0))
this.Value = DataService.Convert<DATA_TYPE>(pCommand.Parameters[0].Value);
....

How to pass more than 1000 entries in 'IN' clause, Oracle 11g

Hi All,
I know this is a very common question in Oracle discussion forum. But, Im in different zone.
I use C#, .NET and Oracle 11g. I have a situation where I will create a query statement using 'IN' clause in C# code based on my requirement and execute that statement from code itself with oracle connection object. I do not have any procedures. I must phrase my query statement and pass it on to OracleConnection object to execute it.
My code looks like this....
List<decimal> x_Ids = new List<decimal>();
I will load my IDs into x_Ids here;
string whereInClause = ........I will prepare a 'IN' clause (All IDs separated by ',')
My query would looks like this....
string query = select * from MYTABLE where X_ID in [ whereInClause with more than 1000 entries]
oraConn.ExecuteQuery(query);
I have a workaround with OR operator with 'IN' clause like below.
X_ID in [ Ids till 1000 entries] OR X_ID in [Next 1000 entries] OR X_ID in [Next 1000 entries] ....so on.....
It is working, but, I heard that this may slowdown the performance of the application. Is this really a performance hit to my application?
Can you please suggest any other workaround to overcome this situation?

>
I have a workaround with OR operator with 'IN' clause like below.
X_ID in [ Ids till 1000 entries] OR X_ID in [Next 1000 entries] OR X_ID in [Next 1000 entries] ....so on.....
It is working, but, I heard that this may slowdown the performance of the application. Is this really a performance hit to my application?There should be no performance difference between a statement like
select * from myTab
where ID in (1,2,3,4,5)
OR ID in (6,7,8,10,12) and
select * from myTab
where ID in (1,2,3,4,5,6,7,8,10,12) The execution plan should be identical.
However those values might better be send as a single object (collection or table of numbers type).
I think the ODP or OO4O connectivity allows to create and such oracle object types.
Another way could be to think about how all the values are created? Did any user enter them manually? Certainly not. Then maybe you can apply the same logic to the SQL statement that created those values in your .Net application.
something like
select * from myTab
where ID in (select t2.FK_ID from otherTab t2 where t2.Col1 = 100) This approach would probably beat all others performancewise. Since you avoid the overhead of constructing the in-lists.

How to pass more than one value in RfcRequest ?

Hi Experts,
I have a FModule (addition) which is exposed as an Enterprise Service. This FM takes two values as input(VAL1 and VAL2) and gives the result (RESULT). I have done the configuration to connect to the backend system via SAP Widget Foundation. When i tried to test in URL :
http://localhost:7531/SapMiddleTier/REST/ewcs/service/rfct/form , i gave the input for the RFC Query Parameters as : <VAL1>10</VAL1><VAL2>20</VAL2> , but i get an error "Expecting Expression" .
Am i giving the input in the wrong format ?
I wrote another FM which doesnt take any input but returns some text as output and when i queried it via the above URL, i get the correct result. I again tested with changing the Fmodule that accepts one input and returns one output and i find that it returning perfectly. But when i try with more than one input i get the below error.
Could some one please help ?
See the error :
<?xml version="1.0" encoding="UTF-8"?>
      <root>
         <Status text="expecting expression" code="-1" type="E"/>
         <StatusDetailList>
            <StatusDetail type="I" text="expecting expression" code="0"/>
            <StatusDetail text="" code="0" type="I" source="net.axyana.qizxopen.xquery.XQEvalException: expecting expression at net.axyana.qizxopen.xquery.ext.XfnEval$Exec.eval(XfnEval.java:62) at net.axyana.qizxopen.xquery.op.Expression.evalAsEvents(Expression.java:556) at net.axyana.qizxopen.xquery.op.ElementConstructor.evalAsEvents(ElementConstructor.java:105) at net.axyana.qizxopen.xquery.op.FLWRExpr.evalAsEvents(FLWRExpr.java:423) at net.axyana.qizxopen.xquery.impl.CompiledQuery.evalAsEvents(CompiledQuery.java:82) at net.axyana.qizxopen.xquery.impl.XQueryExprImpl.doExecuteQuery(XQueryExprImpl.java:267) at
Best Regards,
Sam..

Hi John,
Thank you for your reply.
Am trying to test my FM(using http://localhost:7531/SapMiddleTier/REST/ewcs/service/rfct/form) as mentioned in this link:
http://nvpal168.pal.sap.corp:1080/widgetgallery/staticPage.seam?pageId=staticPage9
I had downloaded the SAP Widget Foundation and its running.
Using the link : http://localhost:7531/SapMiddleTier/REST/ewcs/service/rfct/form we can test exposed function modules . If you are using SAP Widget Foundation, then the above link will open up a form
where in the user gives RFC parameters.
I gave it as <VAL1>10</VAL1><VAL2>20</VAL2> and click on Query RFC = > i get the above mentioned error. If this works, then i can call my function module via Adobe flex using HTTP Service with the service url as "http://localhost:7531/SapMiddleTier/REST/ewcs/service/rfct/form".
Best Regards,
Sam.

How to pass more than one email address in email template

Hi all.
I need to pass email address list in TO field of email template.I passed the list with comma delimeter but even though mail is trigerring only to the first email address in the list...
If any one come across this please mail me...
It is bit urgent....
Thanks in advance....

Hi Thanks for your reply.
No there is no space between two mail ids and also i tried by hardcoding the email id's in TO field even though mail is not triggering....
Through rules i am pasisng the notifer list.Just i am calling the rules in variable and passing that variable in TO field....
Is there any other way to solve this problem...

How can I pass more than one parameters in PDK-URL services?

Hi all,
How can I pass more than one parameters in PDK-URL service? All samples on Portal Center shows just one parameter passing.
<inputParameter class="oracle.portal.provider.v1.URLPortletParameter">
<name>csz</name>
<isMandatory>false</isMandatory>
<displayName>What location do you want a map for (City, State or Zip)?</displayName>
</inputParameter>
How can I write the privider.xml file for passing multiple parameters?

I answer to my question. I've got the answer.
I repeatly write down the <inputParameter> tags, and it works.

How to enter more than 132 characters in a Parameters Field

Hi Everyone,
I have a field of type file_table-filename as Parameters in my Selection-screen. The size of the filename is 1024 characters as declared in the structure file_table. But when i am trying to enter the path into this field, its allowing not more than 132 characters....how is it possible to enter more characters? Even in debugging mode the maximum value we can scroll is upto 128/132 characters..if we want more then we should use the Offset option...but how to enter more than 132 chars into this field?
Best regards,
rama

Hai,
I did the same in my program...i get the filename along with the path into this field...but then there is a chance that the User wants to say edit the filename..here comes the problem.
Best regards,
rama

Pass more than one parameter to ITS link

Hi all,
I have a requirement where I have a report and a tx code assigned to it. Now, I have to open this tx code through ITS, where I have to pass 6 parameters.
When I am trying to pass more than one parameter to the url, it does not work. It only takes the first parameter.
How do I resolve this?
Plzz help!!
Thanks,
Debolina

Hi all,
I have a requirement where I have a report and a tx code assigned to it. Now, I have to open this tx code through ITS, where I have to pass 6 parameters.
When I am trying to pass more than one parameter to the url, it does not work. It only takes the first parameter.
How do I resolve this?
Plzz help!!
Thanks,
Debolina

How to return more than one value from a function

hello everybody,
Can anyone tell me how to return more than a single value from a function, the problem is i have 4 points,
2 points form one line ,another 2 points form 2nd line ,each point is 3 dimensional(x,y,z coorinates) so i will pass these values to func(x1,y1,z1,x2,y2,z2,x3,y3,z3,x4,y4,z4), i will find the point of intersecton of two lines and i will get it as x,y,z , now how to return these 3 coordinates,usually the function returns only one value, please help me to solve it out.
Thanks.

I think the easiest way or trick here is (easiest isn't always the best as we know, but atleast this one will work) to create simple data array. and pass that. Create an array with:
<code>
class justArray {
int x=0
int y=0;
int z= 0;
...somewhere
justArray[] points= new justArray[4];
points[0].x= ..
points[0].y= ..
points[0].z= ..
points[1].x= ..
return points[]
</code>

How to display more than 132 characters in a smartform

Hi Experts,
I am reading notes/text entries by calling read_text and then passing them in a variable. I want to display the notes. But even after declaring the variable as LINE2048, it is displaying only 255characters as output length in smartform.
My code:
TYPES: BEGIN OF TYP_FINAL,
         PARTNER_NO      TYPE BU_PARTNER,         "Partner No.
        OBJECT_ID       TYPE CRMT_OBJECT_ID_DB, "Object ID
        PROCESS_TYPE    TYPE CRMT_PROCESS_TYPE, "Activity Type
       ACTUAL_NOTE     TYPE LINE2048,           "Actual Notes
       END OF TYP_FINAL.
data : T_FINAL           TYPE STANDARD TABLE OF TYP_FINAL,
          WA_FINAL          TYPE TYP_FINAL.
data: v_actualnote     TYPE LINE2048.
          CALL FUNCTION 'READ_TEXT'
            EXPORTING
             CLIENT                        = SY-MANDT
              ID                            = C_0002
              LANGUAGE                      = sy-langu
              NAME                          = l_name1
              OBJECT                        = C_BUT000
            TABLES
              LINES                         = t_line
           EXCEPTIONS
             ID                            = 1
             LANGUAGE                      = 2
          IF SY-SUBRC = 0.
           clear: v_accountnote.
           LOOP AT T_LINE INTO WA_LINE.
             CONCATENATE v_accountnote wa_line INTO v_accountnote SEPARATED BY space.
             clear: wa_line.
           ENDLOOP.
          wa_final-account_note = v_accountnote.
          clear: v_accountnote.
         ENDIF.
On the smartformm side, under main window->loop->text(to display the variables).
How to display more than 255 characters in a smartform.
Regards,
Sangeeta.

why the heck would you use read_text when you want to print a text/note on a form?
in SAP-Script we use the "INCLUDE"-Statement for this.
and in smartforms a Text-node of type 'I'.
you can not write all in one line and expect the system to handle this like a floating text.
one character takes a cretain amount of space (varying for different characters and font and font sizes).
you Page has a certain width, so where is the miracle in the thesis that on a sheet of paper with a certain width just a certain amount of characters will fit?

Can a url referencing an Application Process pass more than one parameter?

Hello,
I have a page in an application that uses pl/sql to generate a list of links.
The purpose of each link is to call another pl/sql procedure which in turn opens/runs a report external to the APEX application (either a call to Oralce Application Server generate live or pull clob stored in database). If the URL calls the pl/sql procedure directly I lose session state and no longer know who the user is. To maintain session state the URL references an APPLICATION_PROCESS. I would like to pass a number of parameters, but can only seem to pass one, using javascript to pass the value to a hidden item which is then accessed in the procedure called by the APPLICATION_PROCESS.
Can I pass more than one parameter?
My URL:
https://<server>/pls/apex/f?p=V('APP_ID'):0:V('APP_SESSION'):APPLICATION_PROCESS=MY_PROCESS:NO::P1NAME:P1VALUE
I could pass all the parameters in P1VALUE and using a special character delimiter break it up again in the javascript, but would prefer not to.
Thanks for any help,
Jock

Did you mean something like this?
https://<server>/pls/apex/f?p=V('APP_ID'):0:V('APP_SESSION'):APPLICATION_PROCESS=MY_PROCESS:NO::P1NAME,P2NAME,P3NAME:P1VALUE,P2VALUE,P3VALUE
Best Regards, Kostya Proskudin

How to pass more than 10 parameters to OnDemand process?

Similar Messages

Maybe you are looking for