How to pass one value from method 1 to method 2 in BADI...

Hello Experts,
How do I pass a custom variable from lets say method 1 to method 2 in BADI? Do I need to
enhance it? For example, I need to pass my flag variable which contains 'X' from method as exporting
and importing in method 2.

Hi,
Yes declare a flag in first method and make it 'X' when you get the condition that you have made changes to item values and export it to memory id ...
EXPORT GV_FLAG TO MEMORY ID 'SSS'.
and in second method import the same...
IMPORT GV_FLAG FROM MEMORY ID 'SSS'.
and according to the value write the logic...
Thanks,
Shailaja Ainala.

Similar Messages

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

How to pass the value from Sub report to main report

I have un report(mainreport) within a subreport(subreport).
With reporting services, how to pass the value from Sub report to main report?
thanks

Hi Alebet,
With reporting services to pass values from sub report in to main report is not supported directly.
But there are some workarounds through which you can get this .
There are two ways to get this.
1- Put your sub report query into some table. i mean to say through the subreport query get some temporary table.
2- Using this temporary tables data write some Scala function in the data base.
3- Now in your main report query return this scala function as a column.
4- Extract the column value where ever you want in your main report which is getting calculated from the subreport query. so you will be getting the values returned from the subreport in the main report.
This will definitely work fine as i have done some report in this way.
Another way of doing is that
1- prepare another data set with the same query as in sub report in the data tab.
2- then refer this 2nd dataset in your main report .
But better way will be the top one.
Anyway please let me know if you get the solution.
Thanks
Mahasweta

How to pass all values from one node element to created node element?

Hi
I have model node element under which there are 7 values, and I've created value node element and trying to pass the values from the model node Element to this value node element. But instead of passing all the values its listing only one value.
How do we rectify this problem!!!
Thanks in Advance
Srikant

Hi Anil
I've created the node named: TableNode
and the name of the node from which i want to get the data is : Li_Required_Node
the Node Structure is
Context
|_ Zs_Quantity_Input
     |_Output
       |_Node_Required_Node
          |_Schddt
|_TableNode
    |_CmpDate
The Schddt has some 7 values
The code Snippet is as follows:
IPublicPricesComp.ITableNodeElement nodeElement;
IPublicPricesComp.ILi_Required_NodeElement scheduleElement;
int counter3Max = wdContext.ILi_Required_Node().size();
for( int counter3= 0 ; counter3 < counter3Max ;counter3++ )
nodeElement = wdContext.createTableNodeElement();
                         scheduleElement = wdContext.nodeZs_Quantity_Input().nodeOutput_Contract_Qty().nodeLi_Required_Node().getLi_Required_NodeElementAt(counter3);
nodeElement.setCmpDate(scheduleElement.getSchddt());
wdContext.nodeTableNode().addElement(nodeElement);
On writing the above code and then binding the node to a table column only one value getting displayed
Where can be the error?
Thanks in Advance
Srikant

How to pass a value from the report to a form ( BIT OF URGENT ).

Hi,
I had created a "Form on a Table with Report" on the report I had remove the edit link and set one of the column feilds that functionality. Now I want to know how to pass that value that is clicked ( having hyper link ) on to the form where it runs a SQL query and then displays the reuslts on the form.
Illustrating with an example.
I am having these following columns on the report ( these are the results for the join statement )
JOBNUM JOBNAME DEPTNUMBER SAL EMPNO LNAME FNAME
In the above JOBNUM is having Hyper link as I removed the edit image.
Now this is area I am having problem. When the user clicked on the JOBNUM then on form it should display 20 other columns( pulled from 5 other tables ) which are related to that particualr JOBNUM.
Anybody give me a solution in which area I have to include my SQL statement and how to pass that selected value to that SQL statement.
Cheers,
Krishna

Hi Ron,
I am doing exaclty what you have suggested me but no luck. I started changing the DEMO_CUSTOMERS application to my requirements.The report is working fine and on the report I have created a page attribute to the Hyper linked column and linked that to the page 2 and assign that attribute with #JOBNUM#.
I am able to pass that value on to form when I click on the JOBNUM. But the problem is I am not able to pass that value into the SQL query so that my query pulls 20+ columns on to the Form ( which is second page ).
Small clarification... On the form region it is said FORM NAME and type is HTML is that is the way the APEX was designed or does it need to say region type as FORM.
Thanks for your help in advance.
Cheers,
Krishna.

How to pass the value from JSP or HTML to Applet

Plz reply ....How can we pass the value from the JSP Page or from HTML page to Applet embedded in same page....

Hi,
<applet codebase = "."
archive = foo.jar"
code = "com.bar"
name = "bar"
id = "bar"
width = "<%=Request["width"] %>"
HEIGHT = "<%=Request["appHeight"] %>"
hspace = "0"
vspace = "0"
align = "middle"
alt     = "Applet is Loading..."
>
     <param name="LANGUAGE"                value="<%=Request["lan"] %>">
     <param name="LOGOUT_USER_URL"           value="EndSession.asp">
     <param name="DATA_READ_INTERVAL"      value="10000">
     <param name="REFRESH_INTERVAL"           value="5000">
     <param name="DEFAULT_FONT"           value="Arial">
</applet>
pass values @ ur html or jsp page to Applet as parameters.
Refer above code. By using getParameter() method of Applet, u can take values inside applet.

How To Pass the value from JSP to Applet

plz reply how can we pass the value from the JSP to Applet ...the applet is embedded in JSP page....

Hi,
<applet codebase = "."
archive = foo.jar"
code = "com.bar"
name = "bar"
id = "bar"
width = "<%=Request["width"] %>"
HEIGHT = "<%=Request["appHeight"] %>"
hspace = "0"
vspace = "0"
align = "middle"
alt     = "Applet is Loading..."
>
     <param name="LANGUAGE"                value="<%=Request["lan"] %>">
     <param name="LOGOUT_USER_URL"           value="EndSession.asp">
     <param name="DATA_READ_INTERVAL"      value="10000">
     <param name="REFRESH_INTERVAL"           value="5000">
     <param name="DEFAULT_FONT"           value="Arial">
</applet>
pass values @ ur html or jsp page to Applet as parameters.
Refer above code. By using getParameter() method of Applet, u can take values inside applet.

How to pass the value from sub report to sub report

how i want get one value from sub report to sub report..
can i do this one...
how can get the value.
i know main report to sub report
i tried that way but
value is 0.00 is comming
Any reasons.

Hi Try this.
Create a formula like this in subreport1 (from the report where you want to pass your value)
Whileprintingrecrods;
Shared Numbervar x :={subreport1Value};
Then go to 2nd sub report and Create a formula like this
Whileprintingrecrods;
Shared Numbervar x ;
Note :Your sub report1 should execute before sub report2 .That means sub report1 should be in the above section of sub report2

How to get one value from multiple duplication for a key figure field

Hi expert,
      I have a infoprovider, with following format:
        employee     hourly_rate   action_type count of action
     there are multiple rows for each employee, I want to create query as follows:
        employee     hourly_rate   action_type count of action
     in which hourly_rate is constant , only retriving one value from multiple rows for one employee, count of action should be summarized.
how to get this hourly_rate.
Many Thanks,

Hi,
put the employee in rows panel -> reaming object put it in free char panel.
suppress the all result rows for the all object except employee .
select the object -> go to query properties -> select display tab -> select result rows -> select suppress.
select the employee -> go to query properties -> select display tab -> select result rows -> select always display. - now it will give employee wise hourly rate summarize data.
Thanks,
Phani.

How to pass the values from the Wb Dynpro Application to the SAP Backend ?

Hi All,
Good morning..,
I have scenario like:
I want to pass the values from the web dynpro appication to the SAP Back end R/3 Table. IN backend the RFC is writtn to accept the structure input from the Webdynpro.
Upto know I imported the corresponding RFC and maaped to the View.
How to proceed with the coding to save the data...
PLease suggest...
Regards and Thanks in Advance,
CSP

Hi Pradeep
Steps:
1. First create an instance for bapi and bind the instance to the bapi node.
Z<bapi name> zb=new Z<bapi name>();
wdContext.nodeZ<bapi name>. bind(zb);
2. Then if u have the import parameter u have to set them by using
    The instance of the above bapi.
    Zb.set<import parameters>;
3. If the bapi has a table parameters then the structure for the table parameters will also be imported
   In the model class.
4. Set the table parameters by creating the instance for that structure and using this instance set it.
   Z<Struct>itm tab=new Z<Struct>();
   Tab.set<table parameters>
5. Then add the structure instance to the bapi instance.
    Zb.add(Tab);
6. Then Execute the bapi after setting the import parameters.
7. If there is any export parameters, then get the values after execution.
Look at this thread for codes
Re: RFC call on click of button
Regards,
Arun

How to pass the values from one screen to another

HI,
consider me21n,
po is created with the item category L,so components tab is enabled.that u all know.
i have added the custom tab in the item details with netwt,gross wt,no of pieces and one more field.
those fields are also in component structure of material data.
i need to pass the matnr,maktx,quantity,ntwt,grosswt from the component to be displayed in the subscreen.
i used import mdpm to xmdpm from memory id 'subcon', where it is exported from the function module 'me_components-maintain'.
how to pass all the values from component of structure MDPM to the subscreen of custom tab in the item details.
help me pls........................'

hi everyone,
MODULE status_0111 OUTPUT.
data : fill type i.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.,
DESCRIBE TABLE lt_zzmm_po_comp LINES fill.
ctrl_0111-lines = fill.
ENDMODULE.                 " STATUS_0111 OUTPUT
MODULE fetch_data OUTPUT.
ctrl_0111-lines = 2.
import xmdpm to lt_xmdpm from memory id 'SUBCON'.
IF not sy-subrc eq 0.
    CLEAR lt_zzmm_po_comp[].
    LOOP AT lt_xmdpm.
      MOVE-CORRESPONDING lt_xmdpm TO lt_zzmm_po_comp.
      APPEND lt_zzmm_po_comp.
    ENDLOOP.
MOVE-CORRESPONDING lt_zzmm_po_comp TO ctrl_0111.
read table ctrl_0111-cols into col where index = 3.
ENDIF.
ENDMODULE.                 " FETCH_DATA OUTPUT
MODULE pass_line OUTPUT.
READ TABLE lt_zzmm_po_comp INDEX ctrl_0111-current_line.
MOVE-CORRESPONDING lt_zzmm_po_comp TO ctrl_0111.
ENDMODULE.                 " PASS_LINE OUTPUT
flow logic
PROCESS BEFORE OUTPUT.
MODULE status_0111.
MODULE FETCH_DATA.
loop at lt_zzmm_po_comp WITH CONTROL ctrl_0111 cursor
ctrl_0111-current_line.
   module pass_line.
endloop.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0111.
loop.
*module read_data.
endloop.
but i cant see my fields in the table control .....i dont know y it is not coming?can anyone help me with code...

How to pass a value to a BC4J method from JSP/ADF and get a return value.

How i can access and application module method from my jsp using JSTL passing a value and hope a return value from BC4J method already exposed using interfase and droped from data control to my jsp page
Any suggestions ?
Mensaje editado por:
mr2k

Hi,
Check the size of that Window in which you are displaying this Text of 130 characters.
May be it is less
in that case split that string into 2 strings and pass the two strings from ITCSY structure to script and use.
reward if useful
regards,
ANJI

How to pass a value from one component to another component in webdynpro

I have created component which consists of alv display and in the alv table I have created pernr has link and when I click that pernr the second webdypro component opens which I have created . now in the second component I want that pernr value. based on that I want to fetch some data.

See i have this code for example which calls the browser with concatenated URL:
CONSTANTS: l_c_url_part1 TYPE string VALUE '?sap-system-login-basic_auth=X&sap-client=',
                     l_c_url_part2 TYPE string VALUE '&sap-language=EN',
                     l_c_url_part3 TYPE string VALUE '&PARAMETER1=',
                     l_c_url_part4 TYPE string VALUE '&PARAMETER2='.
CALL METHOD cl_wd_utilities=>construct_wd_url
               EXPORTING
                 application_name = 'ZTEST'
               IMPORTING
                 out_absolute_url = l_v_url.
             CONCATENATE l_v_url l_c_url_part1
                         sy-mandt l_c_url_part2 l_c_url_part3 'VALUE1' l_c_url_part4 'VALUE2' INTO l_v_url.
             CALL FUNCTION 'CALL_BROWSER'
                 EXPORTING
                   url                           = l_v_url1
                   new_window             = 'X'
                 EXCEPTIONS
                   frontend_not_supported = 1
                   frontend_error         = 2
                   prog_not_found         = 3
                   no_batch               = 4
                   unspecified_error      = 5
                   OTHERS                 = 6.
               IF sy-subrc <> 0.
                 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
               ENDIF.

How to pass a value from a menu to a form

I have a scenario where I'd like to take a value set in a menu and pass it to the form that refers that menu. Using a Global seem to work on one instance but not another. While I try to figure out the instance problem, has anybody else passed values from menus to forms without using a global variable?

How would that work? I've tried by defining a package in the menu but how do I have the form refer to that value?
I try to refer to the package item in the form like
package_name.variable_name
but the form does not know what that is.

How to return multiple values from a getProperty method

Hi All,
Even though I understand that getPropprty can return only one value. I just have a doubt. Is it possible to use a getProperty method of a bean like
public String getemp_Info(){
return emp_Id;
return emp_Name;
}also can any one explain me where and how to use private variables and public variables in a bean.
R.Ramesh.

I already have it I just wanted to know that is there any usage like the one I asked, anyway thanks for your suggestion.
I have already used another getProperty method as balusc quoted.

How to pass one value from method 1 to method 2 in BADI...

Similar Messages

Maybe you are looking for